PCM1727E/2K - 24-Bit Stereo DAC with Dual PLL | Texas Instruments
Référence : PCM1727E/2K ✓ ActifPCM1727E/2K Présentation
An audio DAC is a signal-conversion integrated circuit that translates digital audio samples into analog voltages suitable for an audio amplifier, mixer, headphones, or line-level output stage. The DAC belongs to the broader digital-to-analog converter, audio converter, signal-chain, and semiconductor hierarchies. Its dual-PLL architecture helps derive or recover the timing required between the digital audio source and the stereo conversion outputs.
The principal advantages of PCM1727E/2K include 24-bit data acceptance, a maximum 96 kHz sampling rate, stereo output, integrated output amplifiers, and programmable dual PLL operation. A manufacturer datasheet excerpt identifies a dynamic range of 92 dB. These characteristics make the device applicable to compact consumer-audio systems, digital source equipment, compact audio consoles, and designs that need a clocking structure more flexible than a fixed-rate interface.
Technically, the converter accepts digital audio through an I2S-compatible interface and uses its programmable dual PLL to support system clock arrangements. The integrated digital filter and output amplifier reduce the number of external signal-path blocks required around the DAC. The 24-SSOP package measures approximately 0.209 inch, or 5.30 mm, in body width and uses gull-wing leads, according to the component listing.
Typical applications include CD and DVD audio-source boards, digital mixing consoles, multimedia speakers, stereo receiver modules, and equipment that reconstructs 96 kHz digital audio. For systems using another codec or interface controller, the audio data format, master or slave clock relationship, and supported sampling rate must be checked against the manufacturer’s application information before PCB release.
A critical layout consideration is keeping digital clock and data traces away from the analog output traces. Place the required bypass and decoupling capacitors close to their associated supply pins, maintain a quiet analog return path, and route analog outputs away from switching nodes. The 24-pin SSOP footprint also requires adequate lead spacing and solderability review when the board is assembled.
This product record combines the exact orderable MPN, verified 24-SSOP package information, digital-audio specifications, practical layout guidance, and a qualification-focused comparison with related PCM1727-family devices. It is intended to accelerate sourcing and design review while making compatibility checks explicit before any replacement is approved.
Alternatives de remplacement direct pour PCM1727E/2K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PCM1727E/2K (même facteur de forme et même empreinte).
PCM1727E/2KG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1727E/3K
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1727E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PCM1723E/2K
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1725E/2K
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1727E/2K Valeurs maximales et caractéristiques électriques
| Product Type | Stereo audio digital-to-analog converter |
| Maximum Input Word Length | 24 bit |
| Accepted Input Word Lengths | 16 bit or 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Audio Interface | I2S |
| Channel Count | 2 channels |
| Dynamic Range | 92 dB |
| PLL Architecture | Programmable dual PLL |
| Digital Filter | Integrated |
| Output Amplifier | Integrated stereo output amplifier |
| Package Type | 24-SSOP |
| Package Body Width | 5.30 mm |
| Package Body Width | 0.209 inch |
| Terminal Count | 24 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
Guide de configuration des broches du PCM1727E/2K rectangular
Configuration des broches du PCM1727E/2K (boîtier rectangular). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1727E/2K.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1727E/2K convient pour 6 applications: Digital Audio Source Equipment, 96 kHz High-Resolution Audio, Digital Mixing Console, Multimedia Speaker Amplifier Interface, Stereo Receiver Module, Digital Audio Evaluation Platform.
Digital Audio Source Equipment
The PCM1727E/2K fits digital audio source equipment that accepts 16-bit or 24-bit I2S samples and reconstructs a stereo analog output. Its support for sampling rates up to 96 kHz and 92 dB dynamic range provides a suitable conversion stage for high-resolution media players and source-control products. The integrated digital filter and output amplifier reduce the number of external functional blocks around the converter. In a practical implementation, the source controller supplies data and clock signals, while the PCM1727E/2K drives left and right analog outputs. The design must observe the manufacturer’s clock topology, bypass-capacitor placement, and analog grounding guidance to preserve signal quality.
Recommandé
96 kHz High-Resolution Audio
The PCM1727E/2K is appropriate for systems designed around 96 kHz high-resolution audio because its maximum sampling rate is 96 kHz and its input word length can reach 24 bits. This combination is useful in optical-disc players, high-resolution streaming source modules, and premium digital playback equipment. The dual-PLL architecture provides clocking flexibility when the source clock differs from the required converter operating condition. Confirm the supported sample-rate and clock entries in the PCM1727 datasheet, and assess the analog output filtering against the intended audio bandwidth. The 92 dB dynamic-range figure should be treated as the primary converter-level performance target.
Recommandé
Digital Mixing Console
PCM1727E/2K can provide the stereo output conversion stage of a compact digital mixing console or digital mixer. Its I2S interface supports connection to a digital audio engine, while the integrated filter and output amplifier simplify the final analog path. The 24-bit format and 96 kHz capability can preserve source-word length and sampling rate through the digital processing chain. A board-level implementation should provide clean analog and digital supplies, separate high-current return paths from the converter area, and keep switching regulators and clock lines away from the analog outputs. The dual PLL must be configured according to the master/slave relationship established by the mixing engine.
Recommandé
Multimedia Speaker Amplifier Interface
The PCM1727E/2K is suitable for the digital-to-analog interface preceding a stereo speaker amplifier in a multimedia speaker system. It accepts digital audio over I2S and produces analog outputs that can feed the amplifier input stage. Support for 24-bit data and sampling rates up to 96 kHz is useful when the speaker product must accept high-resolution source material. The implementation should account for the converter’s output amplitude and impedance requirements, terminate each analog line appropriately, and keep the output traces short and away from motor, power-amplifier, and switching-supply paths. Verify external output-filtering requirements using the manufacturer’s reference circuit.
Recommandé
Stereo Receiver Module
PCM1727E/2K can serve as the stereo DAC in a receiver module that accepts digital audio from a broadcast decoder, USB interface, or network-audio processor. Its programmable dual PLL helps accommodate different system-clock relationships, while its integrated output amplifier removes the need for a separate basic output stage. The 92 dB dynamic range is suitable for consumer stereo conversion stages, while the 24-bit interface preserves source precision. Clock and format compatibility must be confirmed for every source controller because I2S word alignment, polarity, and master-clock relationships vary. Follow the manufacturer’s layout for analog grounding and digital isolation.
Recommandé
Digital Audio Evaluation Platform
The PCM1727E/2K is useful in a digital-audio evaluation platform for validating I2S data flow, clock synchronization, and stereo analog-output quality before product integration. Its support for 24-bit words and sampling rates up to 96 kHz allows the same platform to test multiple source formats, while the dual PLL simplifies experimentation with clock arrangements. For meaningful results, the evaluation board should provide independent analog and digital supply routing, accessible test points, and a low-noise output measurement path. The converter’s 92 dB dynamic-range specification provides a reference point for channel balance, noise, and distortion measurements under the manufacturer’s stated test conditions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1727E/2K — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1727E/2KG4 | PCM1727E/3K | PCM1727E | PCM1723E/2K | PCM1725E/2K |
|---|---|---|---|---|---|---|
| Package | 24-SSOP | 24-SSOP | 24-SSOP | 24-SSOP | 24-SSOP | 24-SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Function | Stereo audio DAC with programmable dual PLL | Closely related PCM1727 stereo DAC | Related PCM1727 stereo DAC | PCM1727 stereo DAC | Related PCM-family stereo DAC | Related PCM-family stereo DAC |
| Special Ordering Feature | /2K orderable suffix | /2KG4 green-band suffix | /3K sampling-rate suffix | Base orderable suffix | /2K family suffix | /2K family suffix |
Principaux différenciateurs
- Full /2K ordering configuration for high-resolution stereo conversion (vs PCM1727E/3K)
- Closely related same-family orderable variant (vs PCM1727E/2KG4)
- Documented 96 kHz and 24-bit stereo conversion capability (vs PCM1723E/2K)
- Programmable dual-PLL clock architecture (vs PCM1725E/2K)
Notes de conception
Separate the digital and analog return paths as closely as the reference design permits. Place bypass capacitors at the associated PCM1727E/2K supply pins, keep I2S data and clock traces away from the stereo analog outputs, and avoid routing analog signals beneath switching-regulator or high-current output areas. The converter integrates the digital filter and output amplifier, so analog-return and clock-coupling errors can affect noise and distortion even when the digital data is correct.
Use the supply voltages and bypass configuration specified by the Texas Instruments PCM1727 datasheet, and account for startup sequencing where the connected audio controller controls power rails. Place each local capacitor immediately beside its relevant device pin and provide a low-impedance path to the ground plane. Verify the analog and digital supply levels against the selected PCM1727E/2K ordering configuration before connecting external modules or amplifier inputs.
Do not select a related PCM1727, PCM1723, or PCM1725 solely because it uses a 24-SSOP package. Compare the complete pin description, I2S word alignment, master or slave clock mode, supported sampling rate, PLL configuration, output amplitude, and electrical limits. The /2K, /2KG4, and /3K suffixes encode orderable-device differences that must be checked in the manufacturer ordering table before approving a replacement.
Treat the I2S data, bit clock, and system clock as a coordinated group. Confirm edge relationships and source direction against the PCM1727 family timing diagrams, especially at 96 kHz. Avoid adding long stubs or test-point branches to sensitive clock nets, and use a source with compatible output characteristics. These measures reduce the likelihood of sampling errors that can appear as clicks, channel corruption, or intermittent noise.
Informations de conformité
The available product records do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The /2K suffix identifies the orderable configuration, but its compliance meaning must be confirmed in the manufacturer ordering and material-declaration documentation.