Texas Instruments

PCM1727E/2K - 24-Bit Stereo DAC with Dual PLL | Texas Instruments

MPN: PCM1727E/2K ✓ 啟用中
24-SSOP Package
MOQ: 1 |

PCM1727E/2K 概覽

Texas Instruments PCM1727E/2K is a 24-bit stereo audio digital-to-analog converter with programmable dual phase-locked loops, supporting sampling rates up to 96 kHz and packaged in a 24-pin SSOP. It accepts 16-bit or 24-bit digital audio data, integrates the digital filter and output amplifier, and supports I2S-format audio interfaces.

An audio DAC is a signal-conversion integrated circuit that translates digital audio samples into analog voltages suitable for an audio amplifier, mixer, headphones, or line-level output stage. The DAC belongs to the broader digital-to-analog converter, audio converter, signal-chain, and semiconductor hierarchies. Its dual-PLL architecture helps derive or recover the timing required between the digital audio source and the stereo conversion outputs.

The principal advantages of PCM1727E/2K include 24-bit data acceptance, a maximum 96 kHz sampling rate, stereo output, integrated output amplifiers, and programmable dual PLL operation. A manufacturer datasheet excerpt identifies a dynamic range of 92 dB. These characteristics make the device applicable to compact consumer-audio systems, digital source equipment, compact audio consoles, and designs that need a clocking structure more flexible than a fixed-rate interface.

Technically, the converter accepts digital audio through an I2S-compatible interface and uses its programmable dual PLL to support system clock arrangements. The integrated digital filter and output amplifier reduce the number of external signal-path blocks required around the DAC. The 24-SSOP package measures approximately 0.209 inch, or 5.30 mm, in body width and uses gull-wing leads, according to the component listing.

Typical applications include CD and DVD audio-source boards, digital mixing consoles, multimedia speakers, stereo receiver modules, and equipment that reconstructs 96 kHz digital audio. For systems using another codec or interface controller, the audio data format, master or slave clock relationship, and supported sampling rate must be checked against the manufacturer’s application information before PCB release.

A critical layout consideration is keeping digital clock and data traces away from the analog output traces. Place the required bypass and decoupling capacitors close to their associated supply pins, maintain a quiet analog return path, and route analog outputs away from switching nodes. The 24-pin SSOP footprint also requires adequate lead spacing and solderability review when the board is assembled.

This product record combines the exact orderable MPN, verified 24-SSOP package information, digital-audio specifications, practical layout guidance, and a qualification-focused comparison with related PCM1727-family devices. It is intended to accelerate sourcing and design review while making compatibility checks explicit before any replacement is approved.

直接替換替代品,適用於 PCM1727E/2K — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PCM1727E/2K (相同外形與佔位).

Texas Instruments

PCM1727E/2KG4

✅ 直接替換
📦 24-SSOP
Closely related orderable suffix; sampling rate and all other electrical parameters are 0% different only if the /2K and /2KG4 ordering rows are identical, while green-band procurement status can differ

📋 參考替代品(不在目錄中)

PCM1727E/3K

✅ 直接替換
📦 24-SSOP
Same PCM1727 family and 24-SSOP format, but the /3K suffix identifies a different sampling-rate option; exact sampling-rate delta requires ordering-table verification

📋 參考替代品(不在目錄中)

PCM1727E

✅ 直接替換
Texas Instruments
📦 24-SSOP
Stereo audio digital-to-analog converter · Texas Instruments · 24 bit · 96 kHz · I2S · 92 dB · 2 channels · Programmable dual PLL

聯絡詢價

查看資料表 →

PCM1723E/2K

✅ 直接替換
📦 24-SSOP
Related 24-SSOP stereo DAC listed as an alternative, but channel count and specific performance can differ; exact parameter delta must be verified against the manufacturer pin map

📋 參考替代品(不在目錄中)

PCM1725E/2K

✅ 直接替換
📦 24-SSOP
Related 24-SSOP stereo DAC listed as an alternative, but channel count and specific performance can differ; exact parameter delta must be verified against the manufacturer pin map

📋 參考替代品(不在目錄中)

PCM1727E/2K 最大額定值與電氣特性

Product Type Stereo audio digital-to-analog converter
Maximum Input Word Length 24 bit
Accepted Input Word Lengths 16 bit or 24 bit
Maximum Sampling Rate 96 kHz
Audio Interface I2S
Channel Count 2 channels
Dynamic Range 92 dB
PLL Architecture Programmable dual PLL
Digital Filter Integrated
Output Amplifier Integrated stereo output amplifier
Package Type 24-SSOP
Package Body Width 5.30 mm
Package Body Width 0.209 inch
Terminal Count 24
Terminal Form Gull wing
Package Shape Rectangular

PCM1727E/2K rectangular 腳位配置指南

PCM1727E/2K(rectangular 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

PCM1727E/2K 的 rectangular 封裝腳位圖

無詳細腳位定義資料: PCM1727E/2K.

請參閱 資料表 以查看完整腳位配置。

典型應用

PCM1727E/2K 適用於 6 應用s: Digital Audio Source Equipment, 96 kHz High-Resolution Audio, Digital Mixing Console, Multimedia Speaker Amplifier Interface, Stereo Receiver Module, Digital Audio Evaluation Platform.

🎧

Digital Audio Source Equipment

The PCM1727E/2K fits digital audio source equipment that accepts 16-bit or 24-bit I2S samples and reconstructs a stereo analog output. Its support for sampling rates up to 96 kHz and 92 dB dynamic range provides a suitable conversion stage for high-resolution media players and source-control products. The integrated digital filter and output amplifier reduce the number of external functional blocks around the converter. In a practical implementation, the source controller supplies data and clock signals, while the PCM1727E/2K drives left and right analog outputs. The design must observe the manufacturer’s clock topology, bypass-capacitor placement, and analog grounding guidance to preserve signal quality.

📺

96 kHz High-Resolution Audio

The PCM1727E/2K is appropriate for systems designed around 96 kHz high-resolution audio because its maximum sampling rate is 96 kHz and its input word length can reach 24 bits. This combination is useful in optical-disc players, high-resolution streaming source modules, and premium digital playback equipment. The dual-PLL architecture provides clocking flexibility when the source clock differs from the required converter operating condition. Confirm the supported sample-rate and clock entries in the PCM1727 datasheet, and assess the analog output filtering against the intended audio bandwidth. The 92 dB dynamic-range figure should be treated as the primary converter-level performance target.

🔧

Digital Mixing Console

PCM1727E/2K can provide the stereo output conversion stage of a compact digital mixing console or digital mixer. Its I2S interface supports connection to a digital audio engine, while the integrated filter and output amplifier simplify the final analog path. The 24-bit format and 96 kHz capability can preserve source-word length and sampling rate through the digital processing chain. A board-level implementation should provide clean analog and digital supplies, separate high-current return paths from the converter area, and keep switching regulators and clock lines away from the analog outputs. The dual PLL must be configured according to the master/slave relationship established by the mixing engine.

🎵

Multimedia Speaker Amplifier Interface

The PCM1727E/2K is suitable for the digital-to-analog interface preceding a stereo speaker amplifier in a multimedia speaker system. It accepts digital audio over I2S and produces analog outputs that can feed the amplifier input stage. Support for 24-bit data and sampling rates up to 96 kHz is useful when the speaker product must accept high-resolution source material. The implementation should account for the converter’s output amplitude and impedance requirements, terminate each analog line appropriately, and keep the output traces short and away from motor, power-amplifier, and switching-supply paths. Verify external output-filtering requirements using the manufacturer’s reference circuit.

📻

Stereo Receiver Module

PCM1727E/2K can serve as the stereo DAC in a receiver module that accepts digital audio from a broadcast decoder, USB interface, or network-audio processor. Its programmable dual PLL helps accommodate different system-clock relationships, while its integrated output amplifier removes the need for a separate basic output stage. The 92 dB dynamic range is suitable for consumer stereo conversion stages, while the 24-bit interface preserves source precision. Clock and format compatibility must be confirmed for every source controller because I2S word alignment, polarity, and master-clock relationships vary. Follow the manufacturer’s layout for analog grounding and digital isolation.

📡

Digital Audio Evaluation Platform

The PCM1727E/2K is useful in a digital-audio evaluation platform for validating I2S data flow, clock synchronization, and stereo analog-output quality before product integration. Its support for 24-bit words and sampling rates up to 96 kHz allows the same platform to test multiple source formats, while the dual PLL simplifies experimentation with clock arrangements. For meaningful results, the evaluation board should provide independent analog and digital supply routing, accessible test points, and a low-noise output measurement path. The converter’s 92 dB dynamic-range specification provides a reference point for channel balance, noise, and distortion measurements under the manufacturer’s stated test conditions.

推薦產品摘要

PCM1727E Texas Instruments 用於: Digital Audio Source Equipment, Multimedia Speaker Amplifier Interface PCM1727E/2KG4 Closely related PCM1727 orderable variant 用於: Digital Audio Source Equipment, 96 kHz High-Resolution Audio, Multimedia Speaker Amplifier Interface, Digital Audio Evaluation Platform PCM1727E/3K Related PCM1727 sampling-rate option 用於: 96 kHz High-Resolution Audio, Digital Audio Evaluation Platform PCM1723E/2K Related PCM-family stereo DAC 用於: Digital Mixing Console, Stereo Receiver Module PCM1725E/2K Related PCM-family stereo DAC 用於: Digital Mixing Console, Stereo Receiver Module
What are the key specifications of PCM1727E/2K that engineers should know?
The PCM1727E/2K is a 24-bit stereo audio DAC that accepts 16-bit or 24-bit data, supports I2S audio, and operates at sampling rates up to 96 kHz. According to the Texas Instruments PCM1727 datasheet, it includes an integrated digital filter, integrated output amplifier, and programmable dual PLL, all in a 24-SSOP package. The manufacturer documentation excerpt specifies 92 dB dynamic range.
What is the PCM1727E/2K used for?
The PCM1727E/2K is used to convert digital stereo audio into analog audio signals for downstream amplification or line output. According to the Texas Instruments PCM1727 datasheet, it accepts 16-bit or 24-bit input data through an I2S interface and supports sampling rates up to 96 kHz. Its integrated digital filter, output amplifier, and programmable dual PLL simplify the signal chain in CD players, audio consoles, receivers, and multimedia equipment.
Where can I download the PCM1727E/2K datasheet PDF?
The PCM1727E/2K datasheet is available through the Texas Instruments PCM1727 product documentation at https://www.ti.com/lit/ds/symlink/pcm1727.pdf. The device is the orderable 24-SSOP version of the PCM1727 stereo DAC family. Use the pin-description table, electrical-characteristics tables, application circuit, and package drawings from the manufacturer document before assigning PCB pins or designing the analog output stage.
Where is the pinout for PCM1727E/2K?
The PCM1727E/2K pinout is published in the Texas Instruments PCM1727 datasheet, whose package is a 24-pin SSOP. The component listing confirms 24 terminals, gull-wing construction, and a 5.30 mm body width. Use the manufacturer’s pin-description table to verify analog outputs, digital data, clocks, control signals, supply pins, and ground assignments rather than inferring connections from a generic SSOP drawing.
Can PCM1727E/2K replace PCM1727E/2KG4?
PCM1727E/2K and PCM1727E/2KG4 appear in a published part-to-part comparison and represent closely related Texas Instruments orderable variants. However, a green-band or orderable suffix should not be treated as automatically drop-in without checking its temperature grade, package marking, qualification status, and purchasing nomenclature. Compare every pin, supply voltage, clock requirement, and electrical limit in the manufacturer datasheet before approving the substitution.
What is the difference between PCM1727E/2K and PCM1727E/3K?
PCM1727E/2K and PCM1727E/3K are related members of the Texas Instruments PCM1727 stereo-DAC family, but their suffix codes require comparison against the manufacturer’s ordering information. The PCM1727E/2K is identified in the verified listing as a 24-SSOP, 24-bit, 96 kHz audio DAC. Do not assume the /3K variant is interchangeable without checking its supported sampling rates, clock configuration, electrical limits, and exact pin assignments.
Is PCM1727E/2K suitable for a 96 kHz audio system?
Yes, PCM1727E/2K is suitable for a 96 kHz digital-audio system because the Texas Instruments listing identifies 96 kHz as its maximum sampling rate. Its 24-bit input capability and I2S interface align with high-resolution source material. The surrounding clock architecture must still support the selected rate, and the complete audio path should be designed to preserve the converter’s 92 dB dynamic-range capability.
How should the PCM1727E/2K clocking system be designed?
The PCM1727E/2K should be clocked according to the PCM1727 family application guidance, using its programmable dual PLL to establish the required relationship between the audio source and converter. Check whether the associated controller supplies master or slave mode clocks, the required system-clock frequency, and the supported sample-rate table. Incorrect clock topology can cause synchronization failure even when the I2S data format itself appears correct.
What are the important PCB layout considerations for PCM1727E/2K?
Keep PCM1727E/2K digital clock and data routes away from the analog output paths, place bypass capacitors close to the relevant supply pins, and provide a low-impedance return for the analog section. Route analog outputs away from switching regulators and high-current digital returns. Follow the manufacturer’s application-circuit layout for component placement and grounding, because the integrated DAC and output amplifier can be sensitive to ground-current coupling.
Can PCM1723E/2K or PCM1725E/2K directly replace PCM1727E/2K?
PCM1723E/2K and PCM1725E/2K are listed as alternatives to PCM1727E/2K, but the same source cautions that they may differ in channel count, packaging, or performance. A direct drop-in replacement therefore requires pin-by-pin and function-by-function verification. Compare the digital interface, PLL architecture, supported sample rates, analog output behavior, supply requirements, and 24-SSOP pin map against the PCM1727E/2K datasheet before releasing a substitute.
When should I choose PCM1727E/2K instead of PCM1727E/2KG4?
Choose PCM1727E/2K when its documented orderable suffix, temperature grade, qualification status, and supply configuration satisfy the production design. Choose PCM1727E/2KG4 only after confirming that its green-band specification and procurement terminology are appropriate for the same electrical and packaging requirements. The decisive factor is not the suffix alone; the exact ordering table and product status must match the intended manufacturing environment.
What is the best Texas Instruments equivalent for PCM1727E/2K?
The closest documented Texas Instruments candidates are PCM1727E/2KG4 and PCM1727E/3K because they belong to the same PCM1727 family, while PCM1723E/2K and PCM1725E/2K may offer related functionality. The closest match should be selected only after checking the exact sampling-rate suffix, PLL behavior, electrical characteristics, and pin map. None should be approved as a drop-in solely from its product-family relationship.
Where can I request a quote for PCM1727E/2K?
Use the Request a Quote form on this page to request current PCM1727E/2K pricing, stock, lead time, and package quantity. The form provides a direct response based on the exact Texas Instruments orderable MPN PCM1727E/2K. For production planning, state the required quantity, reel or tray format, date code, and target delivery schedule so the sourcing response can reflect the actual assembly requirement.
What is the current lead time for PCM1727E/2K?
The current lead time and available quantity for PCM1727E/2K should be obtained through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, package format, and inventory position, so a generic availability statement is not suitable for procurement planning. Include the planned purchase quantity and required delivery date when submitting the request.
Is PCM1727E/2K currently in stock?
Current PCM1727E/2K inventory should be confirmed through the Request a Quote form on this page. The device is an orderable Texas Instruments stereo DAC in a 24-SSOP package, but a listing or distributor page alone does not establish the quantity available for a particular shipment. Provide the required quantity and date-code preference so the quote reflects actionable supply rather than a generic product-page status.

工程參考資料,適用於 PCM1727E/2K — 比較、設計指引及合規資訊。

選型指南

Choose PCM1727E/2K when the design needs a 24-bit stereo DAC with an I2S interface, sampling rates up to 96 kHz, an integrated output amplifier, and programmable dual-PLL clocking. PCM1727E/2KG4 is the closest documented family alternative when its green-band ordering status and exact electrical row match the design; PCM1727E is another base-family configuration. Consider PCM1727E/3K only after confirming that its sampling-rate option meets the system requirement. PCM1723E/2K and PCM1725E/2K may suit related PCM-family products, but the alternative listing explicitly warns that channel count, packaging, or specific performance can differ. Before releasing any alternative into an existing design, verify the 24-SSOP pin map, clock direction, I2S format, supported sampling rates, PLL setup, supply levels, and analog-output network. The target remains the most clearly characterized choice when the production BOM must match the documented 24-bit, 96 kHz stereo-DAC configuration.

與替代品比較

參數 本產品 PCM1727E/2KG4 PCM1727E/3K PCM1727E PCM1723E/2K PCM1725E/2K
Package 24-SSOP 24-SSOP 24-SSOP 24-SSOP 24-SSOP 24-SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Function Stereo audio DAC with programmable dual PLL Closely related PCM1727 stereo DAC Related PCM1727 stereo DAC PCM1727 stereo DAC Related PCM-family stereo DAC Related PCM-family stereo DAC
Special Ordering Feature /2K orderable suffix /2KG4 green-band suffix /3K sampling-rate suffix Base orderable suffix /2K family suffix /2K family suffix

主要差異化特點

  • Full /2K ordering configuration for high-resolution stereo conversion (對比PCM1727E/3K)
  • Closely related same-family orderable variant (對比PCM1727E/2KG4)
  • Documented 96 kHz and 24-bit stereo conversion capability (對比PCM1723E/2K)
  • Programmable dual-PLL clock architecture (對比PCM1725E/2K)

設計說明

Separate the digital and analog return paths as closely as the reference design permits. Place bypass capacitors at the associated PCM1727E/2K supply pins, keep I2S data and clock traces away from the stereo analog outputs, and avoid routing analog signals beneath switching-regulator or high-current output areas. The converter integrates the digital filter and output amplifier, so analog-return and clock-coupling errors can affect noise and distortion even when the digital data is correct.

Use the supply voltages and bypass configuration specified by the Texas Instruments PCM1727 datasheet, and account for startup sequencing where the connected audio controller controls power rails. Place each local capacitor immediately beside its relevant device pin and provide a low-impedance path to the ground plane. Verify the analog and digital supply levels against the selected PCM1727E/2K ordering configuration before connecting external modules or amplifier inputs.

Do not select a related PCM1727, PCM1723, or PCM1725 solely because it uses a 24-SSOP package. Compare the complete pin description, I2S word alignment, master or slave clock mode, supported sampling rate, PLL configuration, output amplitude, and electrical limits. The /2K, /2KG4, and /3K suffixes encode orderable-device differences that must be checked in the manufacturer ordering table before approving a replacement.

Treat the I2S data, bit clock, and system clock as a coordinated group. Confirm edge relationships and source direction against the PCM1727 family timing diagrams, especially at 96 kHz. Avoid adding long stubs or test-point branches to sensitive clock nets, and use a source with compatible output characteristics. These measures reduce the likelihood of sampling errors that can appear as clicks, channel corruption, or intermittent noise.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product records do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The /2K suffix identifies the orderable configuration, but its compliance meaning must be confirmed in the manufacturer ordering and material-declaration documentation.

相關搜尋

PCM1727E/2K datasheet PCM1727E/2K datasheet pdf PCM1727E/2K pinout PCM1727E/2K equivalent PCM1727E/2K replacement PCM1727E/2K cross reference PCM1727E/2K vs PCM1727E/3K PCM1727E/2K price PCM1727E/2K stock Texas Instruments PCM1727E/2K PCM1727E/2K 24 bit 96 kHz PCM1727E/2K 24-SSOP PCM1727E/2K audio DAC

相關元件與詞彙

Texas Instruments PCM1727E/2K PCM1727E PCM1727E/2KG4 PCM1727E/3K PCM1723E/2K PCM1725E/2K SoundPlus stereo audio DAC digital-to-analog converter audio converter IC signal-conversion integrated circuit semiconductor I2S programmable dual PLL phase-locked loop digital filter integrated output amplifier 24-bit audio 96 kHz sampling 92 dB dynamic range 24-SSOP SSOP package family surface-mount package multimedia audio digital mixing console stereo receiver multimedia speaker high-resolution audio
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情