Texas Instruments

PCM1738E/2K - 24-Bit 192kHz Stereo Audio DAC | TI

Référence : PCM1738E/2K ✓ Actif
SSOP-28 (DB), 28 pins Package
MOQ : 1 |

PCM1738E/2K Présentation

Texas Instruments PCM1738E/2K is a 24-bit stereo digital-to-analog converter with a 192 kHz sampling rate, housed in a 28-pin SSOP (DB) package. It uses advanced-segment DAC architecture to deliver 117 dB signal-to-noise ratio and balanced current outputs for high-performance audio signal chains. The device supports digital audio data transfer through a serial interface and is designed for applications requiring precise stereo conversion.

An audio DAC is a data converter that transforms digital audio samples into analog voltage or current signals for downstream amplification, filtering, mixing, or line output. The PCM1738 belongs to the digital-to-analog converter category, within the broader ADC/DAC and signal-conversion semiconductor hierarchy. Its stereo architecture converts two audio channels, while the balanced current outputs provide a flexible foundation for analog output stages.

Key features include 24-bit resolution, operation up to 192 kHz, 117 dB SNR, advanced-segment conversion architecture, and balanced current outputs. The 192 kHz capability accommodates high-resolution source material, while 24-bit word length preserves fine amplitude detail. The 117 dB SNR rating describes the converter's signal-to-noise performance, making the device suitable for premium consumer audio, professional playback, and other applications where low-level analog signals must remain distinguishable from system noise.

Internally, the converter employs a delta-sigma-based architecture, a common approach in high-resolution audio DACs because it supports high linearity, digital noise shaping, and flexible clocking. The advanced-segment architecture is intended to improve dynamic performance and clock-jitter tolerance. A serial three-wire interface reduces the number of required digital connections, while the stereo current-output topology gives the board designer control over the final analog signal path.

Typical uses include high-resolution stereo playback, CD and DVD audio systems, digital mixing consoles, professional monitor controllers, and multichannel audio equipment requiring accurate conversion of separate left and right channels. The balanced current outputs can feed an appropriate current-to-voltage and reconstruction network or a downstream audio amplifier stage. Board-level implementation still depends on the clock source, digital interface, output topology, and filtering specified by the manufacturer.

A critical design consideration is to follow the manufacturer datasheet for clock requirements, analog output components, decoupling, and printed-circuit-board layout. Keep digital-clock and sensitive analog routing separated, place decoupling capacitors close to the supply pins, and use a symmetrical output network to minimize channel mismatch. The exact footprint, exposed connections, and analog output implementation should be verified against the device's package drawing before layout is released.

Alternatives de remplacement direct pour PCM1738E/2K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec PCM1738E/2K (même facteur de forme et même empreinte) — différant par Converter Type, Digital Interface, Package.

Texas Instruments
Converter Type: Stereo audio digital-to-analog converter (DAC)
Digital Interface: I2S
Package: 28-pin SSOP, 5.30 mm width

PCM1738E/2KG4

✅ Remplacement direct
📦 SSOP-28 (DB)
Same identified 24-bit resolution, 192 kHz sampling rate, stereo configuration, and 28-pin SSOP package; ordering and RoHS suffix differs

📋 Alternative de référence (hors catalogue)

PCM1738E/2K Valeurs maximales et caractéristiques électriques

Converter Type Stereo digital-to-analog converter
Résolution 24 bit
Fréquence d'échantillonnage 192 kHz maximum
Signal-to-Noise Ratio 117 dB
DAC Architecture Advanced-segment delta-sigma architecture
Type de sortie Balanced current output
Digital Interface Serial 3-wire I2S interface
Number of Channels 2 channels
Boîtier SSOP-28 (DB), 28 pins
Package Shape Rectangular
Lead Form Gull wing
Type de montage Surface mount
Semiconductor Technology CMOS monolithic integrated circuit

Guide de configuration des broches du PCM1738E/2K rectangular

Configuration des broches du PCM1738E/2K (boîtier rectangular). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier rectangular pour le PCM1738E/2K

Aucune donnée de brochage détaillée disponible pour PCM1738E/2K.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

PCM1738E/2K convient pour 6 applications: High-Resolution Stereo Audio Playback, Professional Audio Monitor Controller, Digital Mixing Console, CD and DVD Audio Source, Network and Home Theater Audio, Digital Instrument and Amplifier.

🎧

High-Resolution Stereo Audio Playback

PCM1738E/2K fits a high-resolution stereo playback path because it converts 24-bit digital audio at rates up to 192 kHz while providing a 117 dB SNR rating. Place it between the digital audio receiver and the balanced analog output stage so that left and right channels retain separate current-output paths. The dual balanced current outputs support a symmetrical reconstruction network and reduce sensitivity to common-mode interference. The practical tradeoff is that achieving the specified noise and jitter performance also requires a clean clock source, correct decoupled supply rails, and the analog network shown in the manufacturer application circuit.

🎚️

Professional Audio Monitor Controller

The PCM1738E/2K is appropriate for a professional monitor controller because its 24-bit conversion, 192 kHz maximum rate, and balanced current outputs suit a symmetrical stereo architecture. The converter can feed a current-to-voltage stage and line-level amplifier while preserving channel separation through matched routing. Its 117 dB SNR provides a strong starting point for quiet analog reconstruction, but the complete monitor path also depends on the DAC output network, reference-free clock quality, grounding scheme, and power-supply design. Use the manufacturer's balanced-output example as the baseline rather than substituting a generic current-to-voltage circuit.

🎛️

Digital Mixing Console

PCM1738E/2K can support digital mixing-console output channels when the design accepts current-output stereo DACs and needs a 192 kHz-capable conversion path. The 24-bit word length preserves source detail, while the advanced-segment architecture targets dynamic performance and clock-jitter tolerance. Each converter channel should use matched analog networks so that left and right paths maintain consistent amplitude and phase behavior. Because the device exposes balanced current outputs, console designers can preserve a balanced signal architecture through reconstruction and downstream amplification, provided that grounding and layout follow the manufacturer guidance.

💿

CD and DVD Audio Source

PCM1738E/2K is well suited to CD and DVD audio systems requiring a two-channel, high-resolution DAC stage. A 24-bit converter with a 192 kHz maximum sampling rate provides ample format handling capability, while the 117 dB SNR supports low-noise playback from digital sources. Place the device behind the source's serial audio interface, supply a stable supported clock, and use the recommended reconstruction network to produce balanced analog signals. The design benefit is flexible high-rate handling; the main constraint is that clock jitter, grounding, and output filtering must be controlled to preserve the converter's intended performance.

🌐

Network and Home Theater Audio

PCM1738E/2K can serve as the final stereo DAC in a network or home-theater audio receiver when balanced outputs and high-resolution source support are desired. Its 24-bit, 192 kHz conversion capability accommodates modern digital-audio streams, and the 117 dB SNR helps maintain low background noise through the analog stage. The serial digital interface reduces the required data connections compared with a parallel converter. The current-output architecture still requires a correct balanced reconstruction network, careful channel matching, and separation of clocks from sensitive analog traces to achieve repeatable performance in a densely routed receiver board.

🔊

Digital Instrument and Amplifier

PCM1738E/2K is suitable for a digital instrument or amplifier front end that requires two-channel conversion into a balanced analog signal path. The 192 kHz sampling ceiling offers headroom for future source formats, while the 24-bit resolution and balanced current outputs support precise reconstruction of complex waveforms. The converter should be placed close to the digital source and power system, with its supported clock arrangement kept away from analog output nodes. Matching output impedances and maintaining symmetrical grounding are essential when the converter drives downstream voltage amplification or power-amplifier stages.

Récapitulatif des produits recommandés

PCM1738E/2KG4 Pin-compatible 24-bit stereo DAC ordering variant Utilisé dans : High-Resolution Stereo Audio Playback, Professional Audio Monitor Controller, Digital Mixing Console, CD and DVD Audio Source, Network and Home Theater Audio, Digital Instrument and Amplifier AK4495EQ AKM (Asahi Kasei Microdevices) Utilisé dans : High-Resolution Stereo Audio Playback AK4490EN AKM (Asahi Kasei Microdevices) Utilisé dans : Professional Audio Monitor Controller AK7755EN AKM (Asahi Kasei Microdevices) Utilisé dans : Digital Mixing Console WM8988CGEFL Companion stereo audio codec option Utilisé dans : CD and DVD Audio Source WM8963ECSN/R Cirrus Logic Inc. Utilisé dans : Network and Home Theater Audio AK5383VS TI Utilisé dans : Digital Instrument and Amplifier
What are the key specifications of PCM1738E/2K that engineers should know?
The PCM1738E/2K is a 24-bit stereo audio DAC with a maximum sampling rate of 192 kHz and a 117 dB SNR rating. It uses advanced-segment DAC architecture, provides balanced current outputs, and is packaged in a 28-pin SSOP (DB). According to the Texas Instruments PCM1738 product page, the device supports a serial interface and is designed for improved clock-jitter tolerance.
What is the PCM1738E/2K and where can I download its datasheet?
The PCM1738E/2K is a CMOS monolithic, 24-bit stereo digital-to-analog converter with a maximum sampling rate of 192 kHz. Texas Instruments describes it as an advanced-segment audio DAC with balanced current outputs and improved clock-jitter tolerance. The official manufacturer product page for PCM1738E/2K is the primary starting point for its datasheet, package information, and lifecycle documentation.
What is the sampling rate and resolution of PCM1738E/2K?
The PCM1738E/2K provides 24-bit resolution and supports a maximum sampling rate of 192 kHz. According to the Texas Instruments PCM1738 product page, this combination supports high-resolution stereo audio conversion. The 24-bit word length preserves detailed digital sample information, while the 192 kHz rate is appropriate for high-bandwidth source material and professional playback architectures.
What is the signal-to-noise ratio of PCM1738E/2K?
The PCM1738E/2K has a specified signal-to-noise ratio of 117 dB. According to the Texas Instruments PCM1738 product page, the stereo DAC uses advanced-segment architecture to achieve strong dynamic performance. This SNR rating is particularly relevant when designing low-noise audio paths, although real system performance also depends on the clock, output network, power supply, and downstream amplifier.
Does PCM1738E/2K use balanced current outputs?
Yes, the PCM1738E/2K provides balanced current outputs for its two stereo channels. Texas Instruments identifies this current-output architecture as a central feature of the PCM1738 family. The output stage must be completed with the appropriate analog network, and the manufacturer datasheet should govern output-component selection, filtering, grounding, and signal routing.
Where can I find the PCM1738E/2K pinout and package drawing?
The PCM1738E/2K pinout and package drawing are identified in the Texas Instruments PCM1738 manufacturer documentation. The device is offered in a 28-pin SSOP (DB) package. Before assigning PCB tracks, use the pin-description table and land pattern in the manufacturer datasheet to confirm every power, ground, clock, data, and analog-output connection.
Is PCM1738E/2K suitable for high-resolution stereo audio?
Yes, the PCM1738E/2K is suitable for high-resolution stereo audio because it combines 24-bit conversion, a 192 kHz maximum sampling rate, and 117 dB SNR. Its balanced current outputs also support symmetrical analog designs. Choose it when the signal chain needs balanced left and right channels and when the surrounding clock and output circuitry can preserve its intended performance.
What can replace PCM1738E/2K?
PCM1738E/2KG4 is the closest documented drop-in option for PCM1738E/2K because it identifies the same 24-bit, 192 kHz stereo DAC in the same 28-pin SSOP package. No verified cross-brand equivalent was identified in the available replacement records. Confirm the ordering codes, electrical limits, pin mapping, and RoHS designation against the manufacturer documentation before approving a substitution.
Is PCM1738E/2K the same as PCM1738E/2KG4?
PCM1738E/2K and PCM1738E/2KG4 are closely related orderable versions of the same Texas Instruments PCM1738 stereo DAC family, both described as 24-bit, 192 kHz devices in 28-pin SSOP packages. The suffix distinction can include production or environmental ordering information, so engineers should verify the exact part-status, packing, and compliance fields before treating the devices as interchangeable.
What is the best Texas Instruments equivalent for PCM1738E/2K?
The best documented Texas Instruments equivalent is PCM1738E/2KG4, which provides the same identified 24-bit resolution, 192 kHz sampling capability, stereo architecture, and 28-pin SSOP package format. The main selection check is the ordering suffix rather than a change in conversion architecture. Use the manufacturer part-details page and datasheet to confirm any production, packing, or compliance distinction.
When should I choose PCM1738E/2K over another stereo DAC?
Choose PCM1738E/2K when the design requires a 24-bit, 192 kHz stereo DAC with 117 dB SNR, balanced current outputs, and a 28-pin SSOP implementation. Alternatives may suit systems with different resolution, output architecture, sampling rate, or package requirements. The PCM1738E/2K is particularly appropriate when balanced stereo conversion and high-resolution signal handling are central to the design.
PCM1738E/2K vs PCM1738E/2KG4 - which is better for an audio board?
PCM1738E/2KG4 is the stronger drop-in choice when the existing board was designed for PCM1738E/2K because it retains the identified 24-bit, 192 kHz stereo configuration and 28-pin SSOP package. PCM1738E/2K remains appropriate when its exact ordering code is required. Final selection should account for confirmed availability, order suffixes, and manufacturer documentation rather than pricing alone.
What clock and layout considerations apply to PCM1738E/2K?
PCM1738E/2K requires careful clock and analog-layout treatment to preserve its high-resolution performance. Texas Instruments specifically highlights improved clock-jitter tolerance in the PCM1738 architecture. Use the manufacturer recommended clock configuration, place decoupling near the supply pins, isolate sensitive analog paths from digital-clock routing, and follow the datasheet's output-network and ground-return guidance.
How do I connect the balanced outputs of PCM1738E/2K?
PCM1738E/2K produces balanced current outputs, so each stereo channel requires the analog conversion and reconstruction network described by the manufacturer. Values and topology must be taken from the datasheet's typical application circuit rather than guessed. Keep the two channels symmetrical, minimize trace imbalance, use appropriate grounding, and verify output amplitude and compliance before adding the line or headphone amplifier stage.
Where can I buy PCM1738E/2K and check its lead time?
Use the Request a Quote form on this page to ask about PCM1738E/2K pricing, stock, minimum order quantity, and lead time. The form provides current purchasing information without inserting a price figure that may quickly become outdated. Include the required package, quantity, target date, and shipment destination in the request to obtain a practical quotation.
What is the price and stock status of PCM1738E/2K?
Current PCM1738E/2K pricing and stock should be requested through the Request a Quote form on this page. Because electronic-component pricing and availability can change rapidly, a static price or inventory claim would not reliably represent current purchasing conditions. Submit the required quantity and destination so the quotation reflects the exact order and delivery request.

Données de référence d'ingénierie pour PCM1738E/2K — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose PCM1738E/2K when a design requires a 24-bit stereo DAC operating up to 192 kHz, with a 117 dB SNR rating, balanced current outputs, and a 28-pin SSOP footprint. PCM1738E/2KG4 is the documented same-family drop-in option when its ordering, packing, and compliance designation satisfy the product requirements. This pair is appropriate for professional monitoring, digital mixing, source equipment, and network-audio receivers that retain a balanced analog architecture. The principal engineering work lies outside the ordering code: implement the manufacturer-recommended reconstruction network, provide a low-jitter clock, decouple the supplies, and preserve symmetric layout between channels. If the system requires single-ended outputs, a different converter architecture, or a package that eliminates the SSOP footprint, do not substitute either device without a deliberate PCB and signal-chain redesign.

Comparaison avec les alternatives

Paramètre Ce produit PCM1738E/2KG4
Package SSOP-28 (DB), 28 pins SSOP-28 (DB), 28 pins
Brand Texas Instruments Texas Instruments
Resolution 24 bit 24 bit
Maximum Sampling Rate 192 kHz 192 kHz
Signal-to-Noise Ratio 117 dB 117 dB
Converter Architecture Advanced-segment stereo DAC Advanced-segment stereo DAC
Output Configuration Balanced current outputs Balanced current outputs
Digital Interface Serial 3-wire I2S Serial 3-wire I2S
Number of Channels 2 channels 2 channels

Principaux différenciateurs

  • High-resolution stereo conversion in a compact package (vs PCM1738E/2KG4)
  • Balanced current output architecture (vs PCM1738E/2KG4)
  • Advanced-segment performance positioning (vs PCM1738E/2KG4)

Notes de conception

Place input, output, and bypass capacitors close to their associated pins, and route analog output traces away from serial data and clock nets. Because PCM1738E/2K uses balanced current outputs, keep the left and right channel layouts symmetrical so that trace resistance and capacitance do not create channel imbalance. Follow the manufacturer land pattern and grounding guidance before releasing the PCB artwork.

Use a low-jitter clock source and follow the manufacturer's supported serial-interface timing and routing recommendations. The PCM1738 architecture is designed to improve clock-jitter tolerance, but jitter performance still depends on the complete source-to-DAC clock path. Keep clock traces short, provide a continuous return path, and avoid routing them across or beneath sensitive current-output and reconstruction networks.

Do not treat PCM1738E/2K and PCM1738E/2KG4 as interchangeable solely because their electrical headlines and SSOP-28 packages match. Confirm the exact ordering suffix, pin mapping, supply limits, clock requirements, packing configuration, and compliance fields in the manufacturer documentation. Avoid adding generic capacitors or changing the balanced output topology without validating stability and channel matching.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The PCM1738E/2KG4 ordering suffix is associated with a green-compliant designation in comparison records, but no direct RoHS declaration for PCM1738E/2K is present. Confirm compliance documents for the exact production code before release.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

pcm1738e dac PCM1738E/2K datasheet PCM1738E/2K datasheet pdf PCM1738E/2K pinout PCM1738E/2K equivalent PCM1738E/2K replacement PCM1738E/2K vs PCM1738E/2KG4 Texas Instruments PCM1738E/2K PCM1738E 24-bit stereo DAC PCM1738E/2K SSOP-28 PCM1738E/2K balanced current output PCM1738E/2K professional audio DAC PCM1738E/2K price PCM1738E/2K stock

Composants & termes associés

Texas Instruments PCM1738E/2K PCM1738E/2KG4 PCM1738 digital-to-analog converter DAC audio DAC stereo DAC signal converter ADC/DAC advanced-segment DAC delta-sigma architecture 24-bit resolution 192 kHz sampling rate 117 dB SNR balanced current output I2S serial 3-wire interface clock jitter SSOP-28 DB package surface-mount package high-resolution audio professional audio
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ