PCM1738E/2K - 24-Bit 192kHz Stereo Audio DAC | TI
MPN: PCM1738E/2K ✓ Hoạt độngPCM1738E/2K Tóm tắt
An audio DAC is a data converter that transforms digital audio samples into analog voltage or current signals for downstream amplification, filtering, mixing, or line output. The PCM1738 belongs to the digital-to-analog converter category, within the broader ADC/DAC and signal-conversion semiconductor hierarchy. Its stereo architecture converts two audio channels, while the balanced current outputs provide a flexible foundation for analog output stages.
Key features include 24-bit resolution, operation up to 192 kHz, 117 dB SNR, advanced-segment conversion architecture, and balanced current outputs. The 192 kHz capability accommodates high-resolution source material, while 24-bit word length preserves fine amplitude detail. The 117 dB SNR rating describes the converter's signal-to-noise performance, making the device suitable for premium consumer audio, professional playback, and other applications where low-level analog signals must remain distinguishable from system noise.
Internally, the converter employs a delta-sigma-based architecture, a common approach in high-resolution audio DACs because it supports high linearity, digital noise shaping, and flexible clocking. The advanced-segment architecture is intended to improve dynamic performance and clock-jitter tolerance. A serial three-wire interface reduces the number of required digital connections, while the stereo current-output topology gives the board designer control over the final analog signal path.
Typical uses include high-resolution stereo playback, CD and DVD audio systems, digital mixing consoles, professional monitor controllers, and multichannel audio equipment requiring accurate conversion of separate left and right channels. The balanced current outputs can feed an appropriate current-to-voltage and reconstruction network or a downstream audio amplifier stage. Board-level implementation still depends on the clock source, digital interface, output topology, and filtering specified by the manufacturer.
A critical design consideration is to follow the manufacturer datasheet for clock requirements, analog output components, decoupling, and printed-circuit-board layout. Keep digital-clock and sensitive analog routing separated, place decoupling capacitors close to the supply pins, and use a symmetrical output network to minimize channel mismatch. The exact footprint, exposed connections, and analog output implementation should be verified against the device's package drawing before layout is released.
Bộ thay thế dễ dàng lắp đặt cho PCM1738E/2K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1738E/2K (cùng hình factor và footprint) — khác nhau ở Converter Type, Digital Interface, Package.
PCM1738E/2KG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1738E/2K Tỷ lệ tối đa & tính chất điện
| Converter Type | Stereo digital-to-analog converter |
| Độ phân giải | 24 bit |
| Tỷ lệ lấy mẫu | 192 kHz maximum |
| Signal-to-Noise Ratio | 117 dB |
| DAC Architecture | Advanced-segment delta-sigma architecture |
| Kiểu đầu ra | Balanced current output |
| Digital Interface | Serial 3-wire I2S interface |
| Number of Channels | 2 channels |
| Hộp | SSOP-28 (DB), 28 pins |
| Package Shape | Rectangular |
| Lead Form | Gull wing |
| Kiểu lắp đặt | Surface mount |
| Semiconductor Technology | CMOS monolithic integrated circuit |
Hướng dẫn cấu hình chân PCM1738E/2K rectangular
Cấu hình chân cho PCM1738E/2K (rectangular gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1738E/2K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1738E/2K phù hợp cho 6 Áp dụngs: High-Resolution Stereo Audio Playback, Professional Audio Monitor Controller, Digital Mixing Console, CD and DVD Audio Source, Network and Home Theater Audio, Digital Instrument and Amplifier.
High-Resolution Stereo Audio Playback
PCM1738E/2K fits a high-resolution stereo playback path because it converts 24-bit digital audio at rates up to 192 kHz while providing a 117 dB SNR rating. Place it between the digital audio receiver and the balanced analog output stage so that left and right channels retain separate current-output paths. The dual balanced current outputs support a symmetrical reconstruction network and reduce sensitivity to common-mode interference. The practical tradeoff is that achieving the specified noise and jitter performance also requires a clean clock source, correct decoupled supply rails, and the analog network shown in the manufacturer application circuit.
Được đề xuất
Professional Audio Monitor Controller
The PCM1738E/2K is appropriate for a professional monitor controller because its 24-bit conversion, 192 kHz maximum rate, and balanced current outputs suit a symmetrical stereo architecture. The converter can feed a current-to-voltage stage and line-level amplifier while preserving channel separation through matched routing. Its 117 dB SNR provides a strong starting point for quiet analog reconstruction, but the complete monitor path also depends on the DAC output network, reference-free clock quality, grounding scheme, and power-supply design. Use the manufacturer's balanced-output example as the baseline rather than substituting a generic current-to-voltage circuit.
Được đề xuất
Digital Mixing Console
PCM1738E/2K can support digital mixing-console output channels when the design accepts current-output stereo DACs and needs a 192 kHz-capable conversion path. The 24-bit word length preserves source detail, while the advanced-segment architecture targets dynamic performance and clock-jitter tolerance. Each converter channel should use matched analog networks so that left and right paths maintain consistent amplitude and phase behavior. Because the device exposes balanced current outputs, console designers can preserve a balanced signal architecture through reconstruction and downstream amplification, provided that grounding and layout follow the manufacturer guidance.
Được đề xuất
CD and DVD Audio Source
PCM1738E/2K is well suited to CD and DVD audio systems requiring a two-channel, high-resolution DAC stage. A 24-bit converter with a 192 kHz maximum sampling rate provides ample format handling capability, while the 117 dB SNR supports low-noise playback from digital sources. Place the device behind the source's serial audio interface, supply a stable supported clock, and use the recommended reconstruction network to produce balanced analog signals. The design benefit is flexible high-rate handling; the main constraint is that clock jitter, grounding, and output filtering must be controlled to preserve the converter's intended performance.
Được đề xuất
Network and Home Theater Audio
PCM1738E/2K can serve as the final stereo DAC in a network or home-theater audio receiver when balanced outputs and high-resolution source support are desired. Its 24-bit, 192 kHz conversion capability accommodates modern digital-audio streams, and the 117 dB SNR helps maintain low background noise through the analog stage. The serial digital interface reduces the required data connections compared with a parallel converter. The current-output architecture still requires a correct balanced reconstruction network, careful channel matching, and separation of clocks from sensitive analog traces to achieve repeatable performance in a densely routed receiver board.
Được đề xuất
Digital Instrument and Amplifier
PCM1738E/2K is suitable for a digital instrument or amplifier front end that requires two-channel conversion into a balanced analog signal path. The 192 kHz sampling ceiling offers headroom for future source formats, while the 24-bit resolution and balanced current outputs support precise reconstruction of complex waveforms. The converter should be placed close to the digital source and power system, with its supported clock arrangement kept away from analog output nodes. Matching output impedances and maintaining symmetrical grounding are essential when the converter drives downstream voltage amplification or power-amplifier stages.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1738E/2K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1738E/2KG4 |
|---|---|---|
| Package | SSOP-28 (DB), 28 pins | SSOP-28 (DB), 28 pins |
| Brand | Texas Instruments | Texas Instruments |
| Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Signal-to-Noise Ratio | 117 dB | 117 dB |
| Converter Architecture | Advanced-segment stereo DAC | Advanced-segment stereo DAC |
| Output Configuration | Balanced current outputs | Balanced current outputs |
| Digital Interface | Serial 3-wire I2S | Serial 3-wire I2S |
| Number of Channels | 2 channels | 2 channels |
Bảo phân biệt quan trọng
- High-resolution stereo conversion in a compact package (vsPCM1738E/2KG4)
- Balanced current output architecture (vsPCM1738E/2KG4)
- Advanced-segment performance positioning (vsPCM1738E/2KG4)
Ghi chú thiết kế
Place input, output, and bypass capacitors close to their associated pins, and route analog output traces away from serial data and clock nets. Because PCM1738E/2K uses balanced current outputs, keep the left and right channel layouts symmetrical so that trace resistance and capacitance do not create channel imbalance. Follow the manufacturer land pattern and grounding guidance before releasing the PCB artwork.
Use a low-jitter clock source and follow the manufacturer's supported serial-interface timing and routing recommendations. The PCM1738 architecture is designed to improve clock-jitter tolerance, but jitter performance still depends on the complete source-to-DAC clock path. Keep clock traces short, provide a continuous return path, and avoid routing them across or beneath sensitive current-output and reconstruction networks.
Do not treat PCM1738E/2K and PCM1738E/2KG4 as interchangeable solely because their electrical headlines and SSOP-28 packages match. Confirm the exact ordering suffix, pin mapping, supply limits, clock requirements, packing configuration, and compliance fields in the manufacturer documentation. Avoid adding generic capacitors or changing the balanced output topology without validating stability and channel matching.
Thông tin tuân thủ
The PCM1738E/2KG4 ordering suffix is associated with a green-compliant designation in comparison records, but no direct RoHS declaration for PCM1738E/2K is present. Confirm compliance documents for the exact production code before release.