PCM1803ADBR - 24-Bit 96kHz Stereo ADC | Texas Instruments
Référence : PCM1803ADBR ✓ ActifPCM1803ADBR Présentation
An audio ADC is an interface IC that converts left- and right-channel analog voltages into a digital sample stream suitable for processing by a digital audio controller, DSP, codec, or storage system. The PCM1803 belongs to the delta-sigma ADC family and combines a modulator, oversampling stage, decimation filter, and high-pass filter in one integrated circuit. Its single-ended input architecture simplifies designs in which the source can drive a ground-referenced signal without a balanced-input front end.
The principal specifications are 24-bit resolution, a maximum sampling rate of 96 kHz, stereo operation, and 20-pin SSOP packaging. The converter accepts a 3 Vp-p single-ended input range according to the manufacturer information. Oversampling at 64 times or 128 times moves quantization noise away from the audio band, while the digital decimation filter converts the high-rate modulator output into the required audio data stream. The integrated high-pass filter helps prevent DC offset from consuming dynamic range.
The PCM1803A uses a delta-sigma modulator and CMOS process technology. Its digital interface supports serial audio transfer and selectable master or slave operation. Master mode is useful when the converter supplies the audio clock, whereas slave mode allows an external audio system to control the timing. These operating options allow the device to serve as the central converter in a compact audio subsystem or as a slave peripheral in a multi-component digital audio design.
Typical uses include consumer audio equipment, USB or portable audio interfaces, digital mixers, sound-card front ends, digital recording equipment, and industrial audio capture systems. The 24-bit word length provides substantially higher nominal resolution than conventional 16-bit CD audio, while the 96 kHz sampling rate supports professional and high-resolution audio conversion requirements. The integrated high-pass filter is particularly useful when analog source offsets must be removed before downstream amplification or storage.
Design the analog input path for low noise and adequate headroom. Keep input traces short, use a stable low-noise reference arrangement as specified by the manufacturer, and provide clean analog and digital supply paths. The serial clock, data, and control traces should be routed away from sensitive input nodes. Master or slave mode must be selected so that clock ownership is unambiguous, because incompatible clock arrangements can cause data corruption or nonstandard sampling behavior.
This product page organizes the principal PCM1803ADBR specifications, package information, practical application guidance, and qualified replacement analysis. It also distinguishes true same-footprint candidates from broader audio-converter choices, helping engineers make a pin-level and signal-interface decision before committing a PCB layout to production.
Alternatives de remplacement direct pour PCM1803ADBR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PCM1803ADBR (même facteur de forme et même empreinte) — différant par Package, Process Technology.
PCM1804DBR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1802DBR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1782DBQR
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PCM3010DBR
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PCM1803ADBR Valeurs maximales et caractéristiques électriques
| Device Type | Stereo delta-sigma analog-to-digital converter |
| Résolution | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Channel Count | 2 channels |
| Analog Input Architecture | Single-ended |
| Full-Scale Analog Input | 3 Vp-p |
| Oversampling Ratio | 64 times or 128 times |
| Digital Interface | Serial audio interface |
| Operating Modes | Master or slave |
| Integrated High-Pass Filter | Yes |
| Integrated Decimation Filter | Yes |
| Process Technology | CMOS |
| Boîtier | 20-pin SSOP |
| Type de montage | Surface mount |
| Manufacturer Description | 24-bit, 96 kHz stereo A/D converter |
Guide de configuration des broches du PCM1803ADBR 20-pin ssop
Configuration des broches du PCM1803ADBR (boîtier 20-pin ssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1803ADBR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1803ADBR convient pour 6 applications: USB Audio Interface, Portable Digital Recorder, Digital Mixer Input Card, Sound Card Front End, Digital Audio Amplifier Source, Industrial Audio Monitor.
USB Audio Interface
PCM1803ADBR is suitable for the stereo analog input stage of a USB audio interface that requires 24-bit conversion at up to 96 kHz. Its two single-ended 3 Vp-p inputs reduce the need for a balanced analog front end, while the integrated high-pass filter removes DC offset before samples reach the digital audio controller. Use master mode when the converter must generate the audio clock, or slave mode when the USB controller supplies timing. Correct serial format, clock polarity, and synchronization are essential for reliable playback and capture.
Recommandé
Portable Digital Recorder
The PCM1803ADBR fits compact stereo recording products where high-resolution conversion and low component count are important. Its 24-bit, 96 kHz capability captures more nominal detail than a 16-bit converter, while the delta-sigma architecture includes decimation and high-pass filtering on chip. A portable implementation should provide stable analog and digital supplies, controlled input gain, and short low-noise analog traces. Master or slave operation can be selected to coordinate with the recorder’s audio controller.
Recommandé
Digital Mixer Input Card
PCM1803ADBR can provide the stereo conversion channel for a digital mixer input module. The single-ended 3 Vp-p input range is compatible with line-level conditioning when the preceding amplifier stage develops the required voltage, and the on-chip high-pass filter helps prevent DC offsets from consuming converter range. The serial interface reduces parallel wiring in multi-channel equipment. Designers should account for the exact digital filter response, clock source, and synchronization topology when allocating several converter channels.
Recommandé
Sound Card Front End
The PCM1803ADBR is appropriate for a sound-card analog front end requiring a stereo, 24-bit ADC at a 96 kHz sampling rate. Single-ended inputs simplify the first conversion stage, and the integrated decimation and high-pass functions reduce the number of separate signal-conditioning blocks. Keep the analog input path away from the serial clock and data traces, establish a quiet return path, and match the converter’s clocking mode to the host interface. This arrangement supports high-resolution monitoring, playback, and archival capture systems.
Recommandé
Digital Audio Amplifier Source
PCM1803ADBR can serve as the source converter ahead of a digital audio power amplifier in consumer or professional playback equipment. Its 24-bit digital output preserves nominal resolution before amplification, and the 96 kHz rate supports high-resolution source material. The analog stage must present a clean 3 Vp-p signal, while the serial data and clock routing should remain isolated from sensitive input nodes. Master mode can provide a local audio clock when the downstream amplifier architecture accepts that clock relationship.
Recommandé
Industrial Audio Monitor
The PCM1803ADBR is useful in industrial monitoring equipment that captures two analog channels at up to 96 kHz for analysis, playback, or diagnostic review. Its integrated high-pass filter is valuable when transducers produce a DC operating offset, while the 24-bit conversion provides additional nominal headroom for low-level signals. For reliable operation in industrial products, isolate sensitive inputs from digital and switching circuitry and verify grounding so that sensor currents do not modulate the converter reference or supply rails.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1803ADBR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1804DBR | PCM1802DBR | PCM1782DBQR | PCM3010DBR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-20 | SSOP-20 | SSOP-20 | SSOP-20 | SSOP-20 |
| Device Type | Stereo delta-sigma ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC |
Principaux différenciateurs
- Selectable oversampling integrated into a 24-bit stereo converter (vs PCM1804DBR)
- Integrated DC-removal path for single-ended stereo sources (vs PCM3010DBR)
- Explicit master and slave clock modes (vs PCM1782DBQR)
- Single-ended stereo input with 3 Vp-p full-scale range (vs PCM1802DBR)
Notes de conception
Route the single-ended stereo inputs as short, impedance-controlled traces away from the serial clock, data lines, and switching-supply nodes. Place input-network components close to the converter pins and maintain a continuous quiet return path between the analog source and device ground. Because the input range is 3 Vp-p, size the preceding amplifier and attenuation network so normal signal peaks remain inside that range without clipping.
Establish whether PCM1803ADBR operates as master or slave before laying out the audio clock network. The selected mode determines whether the converter generates or receives the master clock, and a mismatch can corrupt framing or produce invalid sampling rates. Follow the manufacturer serial-interface timing diagrams for data setup, hold, clock polarity, and synchronization, and avoid adding long stubs or test-point capacitance to the clock net.
Do not assume that two 20-pin stereo ADC packages are interchangeable merely because their footprints match. Before substituting PCM1804DBR, PCM1802DBR, PCM1782DBQR, or PCM3010DBR, compare every pin name, supply requirement, analog input range, clock mode, digital data format, reset or mode behavior, and filter response. The ADC may still fit the footprint while requiring schematic or firmware changes.
Separate analog and digital return-current paths where the board architecture permits and decouple the supply pins according to the manufacturer application guidance. The delta-sigma converter’s clock and data activity can create fast transient currents, so an inductive supply impedance between the source and decoupling capacitor can contaminate conversion performance. Place the closest high-frequency capacitor directly between the relevant supply and ground pins.
Informations de conformité
Compliance status requires confirmation from the current manufacturer product documentation or the organization’s material-compliance declaration.