Texas Instruments

PCM1803ADBR - 24-Bit 96kHz Stereo ADC | Texas Instruments

Артикул: PCM1803ADBR ✓ Активен
20-pin SSOP Package
MOQ: 1 |

PCM1803ADBR Обзор

The Texas Instruments PCM1803ADBR is a 24-bit, 96 kHz stereo delta-sigma analog-to-digital converter with single-ended analog inputs, housed in a 20-pin SSOP package. It supports 64-times and 128-times oversampling, digital decimation, and an on-chip high-pass filter that removes DC components from the input signal. Master and slave operating modes provide flexibility when connecting the converter to a digital audio system.

An audio ADC is an interface IC that converts left- and right-channel analog voltages into a digital sample stream suitable for processing by a digital audio controller, DSP, codec, or storage system. The PCM1803 belongs to the delta-sigma ADC family and combines a modulator, oversampling stage, decimation filter, and high-pass filter in one integrated circuit. Its single-ended input architecture simplifies designs in which the source can drive a ground-referenced signal without a balanced-input front end.

The principal specifications are 24-bit resolution, a maximum sampling rate of 96 kHz, stereo operation, and 20-pin SSOP packaging. The converter accepts a 3 Vp-p single-ended input range according to the manufacturer information. Oversampling at 64 times or 128 times moves quantization noise away from the audio band, while the digital decimation filter converts the high-rate modulator output into the required audio data stream. The integrated high-pass filter helps prevent DC offset from consuming dynamic range.

The PCM1803A uses a delta-sigma modulator and CMOS process technology. Its digital interface supports serial audio transfer and selectable master or slave operation. Master mode is useful when the converter supplies the audio clock, whereas slave mode allows an external audio system to control the timing. These operating options allow the device to serve as the central converter in a compact audio subsystem or as a slave peripheral in a multi-component digital audio design.

Typical uses include consumer audio equipment, USB or portable audio interfaces, digital mixers, sound-card front ends, digital recording equipment, and industrial audio capture systems. The 24-bit word length provides substantially higher nominal resolution than conventional 16-bit CD audio, while the 96 kHz sampling rate supports professional and high-resolution audio conversion requirements. The integrated high-pass filter is particularly useful when analog source offsets must be removed before downstream amplification or storage.

Design the analog input path for low noise and adequate headroom. Keep input traces short, use a stable low-noise reference arrangement as specified by the manufacturer, and provide clean analog and digital supply paths. The serial clock, data, and control traces should be routed away from sensitive input nodes. Master or slave mode must be selected so that clock ownership is unambiguous, because incompatible clock arrangements can cause data corruption or nonstandard sampling behavior.

This product page organizes the principal PCM1803ADBR specifications, package information, practical application guidance, and qualified replacement analysis. It also distinguishes true same-footprint candidates from broader audio-converter choices, helping engineers make a pin-level and signal-interface decision before committing a PCB layout to production.

Аналоги без доработки для PCM1803ADBR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PCM1803ADBR (тот же форм-фактор и посадочное место) — отличается по Package, Process Technology.

Texas Instruments
Package: 16-lead SSOP
Process Technology: CMOS monolithic
Сравнить с PCM1803ADBR →
Texas Instruments
Package: 24-pin SSOP
Сравнить с PCM1803ADBR →

PCM1804DBR

✅ Прямая замена
📦 SSOP-20
Same 20-pin SSOP footprint and related stereo ADC family; PCM1804DBR has different device-specific clocking and filtering details that require pin-function verification, with an estimated 90% parameter match.

📋 Справочный аналог (нет в каталоге)

PCM1802DBR

✅ Прямая замена ⚠️ Характеристики не проверены
📦 SSOP-20
Same 20-pin SSOP package and 24-bit, 96 kHz stereo ADC class; internal oversampling and device-specific electrical details differ by up to 20% from PCM1803ADBR.

📋 Справочный аналог (нет в каталоге)

PCM1782DBQR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 SSOP-20
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · 200 kHz · I2S · Enhanced multilevel delta-sigma · CMOS monolithic · 2 channels

Уточнить цену

Открыть даташит →

PCM3010DBR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 SSOP-20
24 bit · 24 bit · 96 kHz · 192 kHz · 64 times · 8 times · Stereo · Single-ended

Уточнить цену

Открыть даташит →

PCM1803ADBR Максимальные параметры и электрические характеристики

Device Type Stereo delta-sigma analog-to-digital converter
Разрешение 24 bit
Maximum Sampling Rate 96 kHz
Channel Count 2 channels
Analog Input Architecture Single-ended
Full-Scale Analog Input 3 Vp-p
Oversampling Ratio 64 times or 128 times
Digital Interface Serial audio interface
Operating Modes Master or slave
Integrated High-Pass Filter Yes
Integrated Decimation Filter Yes
Process Technology CMOS
Корпус 20-pin SSOP
Тип монтажа Surface mount
Manufacturer Description 24-bit, 96 kHz stereo A/D converter

Руководство по цоколевке PCM1803ADBR в корпусе 20-pin ssop

Цоколевка для PCM1803ADBR (корпус 20-pin ssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 20-pin ssop для PCM1803ADBR

Нет подробных данных о распиновке для PCM1803ADBR.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PCM1803ADBR подходит для 6 применениеs: USB Audio Interface, Portable Digital Recorder, Digital Mixer Input Card, Sound Card Front End, Digital Audio Amplifier Source, Industrial Audio Monitor.

🔊

USB Audio Interface

PCM1803ADBR is suitable for the stereo analog input stage of a USB audio interface that requires 24-bit conversion at up to 96 kHz. Its two single-ended 3 Vp-p inputs reduce the need for a balanced analog front end, while the integrated high-pass filter removes DC offset before samples reach the digital audio controller. Use master mode when the converter must generate the audio clock, or slave mode when the USB controller supplies timing. Correct serial format, clock polarity, and synchronization are essential for reliable playback and capture.

📱

Portable Digital Recorder

The PCM1803ADBR fits compact stereo recording products where high-resolution conversion and low component count are important. Its 24-bit, 96 kHz capability captures more nominal detail than a 16-bit converter, while the delta-sigma architecture includes decimation and high-pass filtering on chip. A portable implementation should provide stable analog and digital supplies, controlled input gain, and short low-noise analog traces. Master or slave operation can be selected to coordinate with the recorder’s audio controller.

🎚️

Digital Mixer Input Card

PCM1803ADBR can provide the stereo conversion channel for a digital mixer input module. The single-ended 3 Vp-p input range is compatible with line-level conditioning when the preceding amplifier stage develops the required voltage, and the on-chip high-pass filter helps prevent DC offsets from consuming converter range. The serial interface reduces parallel wiring in multi-channel equipment. Designers should account for the exact digital filter response, clock source, and synchronization topology when allocating several converter channels.

🖥️

Sound Card Front End

The PCM1803ADBR is appropriate for a sound-card analog front end requiring a stereo, 24-bit ADC at a 96 kHz sampling rate. Single-ended inputs simplify the first conversion stage, and the integrated decimation and high-pass functions reduce the number of separate signal-conditioning blocks. Keep the analog input path away from the serial clock and data traces, establish a quiet return path, and match the converter’s clocking mode to the host interface. This arrangement supports high-resolution monitoring, playback, and archival capture systems.

🔉

Digital Audio Amplifier Source

PCM1803ADBR can serve as the source converter ahead of a digital audio power amplifier in consumer or professional playback equipment. Its 24-bit digital output preserves nominal resolution before amplification, and the 96 kHz rate supports high-resolution source material. The analog stage must present a clean 3 Vp-p signal, while the serial data and clock routing should remain isolated from sensitive input nodes. Master mode can provide a local audio clock when the downstream amplifier architecture accepts that clock relationship.

🏭

Industrial Audio Monitor

The PCM1803ADBR is useful in industrial monitoring equipment that captures two analog channels at up to 96 kHz for analysis, playback, or diagnostic review. Its integrated high-pass filter is valuable when transducers produce a DC operating offset, while the 24-bit conversion provides additional nominal headroom for low-level signals. For reliable operation in industrial products, isolate sensitive inputs from digital and switching circuitry and verify grounding so that sensor currents do not modulate the converter reference or supply rails.

What is the PCM1803ADBR and what are its main specifications?
The PCM1803ADBR is a Texas Instruments 24-bit, 96 kHz stereo delta-sigma analog-to-digital converter with single-ended inputs in a 20-pin SSOP package. According to the manufacturer product information, it uses 64-times and 128-times oversampling and integrates both a digital decimation filter and a high-pass filter. It also supports master and slave operating modes for flexible audio-clock architecture.
Where can I download the PCM1803ADBR datasheet PDF?
The official PCM1803A product-details page for PCM1803ADBR provides access to the manufacturer datasheet and supporting documentation. The device is described there as a 24-bit, 96 kHz stereo A/D converter using a delta-sigma modulator with 64-times and 128-times oversampling. Use the Texas Instruments datasheet for the definitive pin table, electrical limits, timing diagrams, and recommended application circuit.
Where can I find the PCM1803ADBR pinout?
The PCM1803ADBR pinout is documented in the manufacturer pin-configuration and pin-description sections of the PCM1803A datasheet. The device uses a 20-pin SSOP package, so the package drawing must be read together with the terminal table when assigning PCB nets. Use the package land pattern and pin table from Texas Instruments rather than relying on a generic SSOP drawing.
Can PCM1803ADBR be used as a drop-in replacement for PCM1804DBR?
PCM1804DBR is the closest identified same-brand candidate because it is associated with the same 20-pin SSOP conversion family, but replacement still requires verification of pin functions, clock behavior, and digital-interface timing. The manufacturer product pages for both devices should be compared before release. The available comparison identifies packaging and family relationships but does not establish every electrical timing condition.
What is the best Texas Instruments equivalent for PCM1803ADBR?
The best candidate depends on whether the requirement is an exact pin-for-pin exchange or merely a new board design. PCM1804DBR is the most directly identified alternative, while PCM1802DBR, PCM1782DBQR, and PCM3010DBR belong to related TI audio-converter families with possible SSOP-20 footprints. Each candidate must be checked against the required resolution, sampling rate, clocking, interface voltage, and pin assignments.
Where to buy PCM1803ADBR online?
PCM1803ADBR can be requested through the Request a Quote form on this page, where the exact suffix, quantity, and shipment requirements should be stated. The part is a Texas Instruments 24-bit, 96 kHz stereo ADC in a 20-pin SSOP package. Buyers should also confirm manufacturer lifecycle status, date code requirements, and authorized-channel traceability before placing a production order.
What is the price of PCM1803ADBR?
Use the Request a Quote form on this page for the current commercial terms of PCM1803ADBR. The structured price information is maintained separately so that it can reflect changing supply conditions without leaving a stale figure in the technical description. For production planning, include the required quantity, reel format, target date, and any traceability or date-code requirements with the request.
What is the lead time for PCM1803ADBR?
The current lead time for PCM1803ADBR should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, package or reel configuration, traceability requirements, and manufacturer inventory position. The device is listed by Texas Instruments as a PCM1803A-family product with an official manufacturer part-details page, which is the appropriate starting point for exact ordering information.
Is PCM1803ADBR in stock?
Current PCM1803ADBR inventory should be confirmed through the Request a Quote form on this page. The part is identified as an active Texas Instruments PCM1803A-family product in a 20-pin SSOP package, but transaction timing still depends on quantity and supply allocation. Submit the required order quantity and reel details so the response can reflect the appropriate supply channel.
PCM1803ADBR vs PCM1804DBR: which is better for an audio interface?
Choose PCM1803ADBR when its documented oversampling, filtering, master/slave behavior, and clocking match the audio architecture. Choose PCM1804DBR when its electrical and timing characteristics provide a better match or when it offers a qualified path from an existing design. Both are identified in the 20-pin SSOP family, but package similarity alone does not prove safe substitution.
What is the difference between PCM1803ADBR and PCM1802DBR?
Both devices are related 24-bit, 96 kHz stereo Texas Instruments audio ADC families offered in small-outline packages, but their internal implementation and detailed electrical characteristics may differ. The PCM1803A uses selectable 64-times and 128-times oversampling and includes an integrated high-pass filter. Confirm oversampling, clock mode, interface format, supply voltage, and every pin function before replacing PCM1803ADBR with PCM1802DBR.
When should I choose PCM1803ADBR over PCM1782DBQR?
Choose PCM1803ADBR when the design specifically requires its 24-bit, 96 kHz single-ended stereo architecture, selectable oversampling, integrated high-pass filter, and master/slave clock support. Consider PCM1782DBQR only after comparing its converter architecture, supported master/slave modes, digital filter behavior, interface timing, supply requirements, and exact 20-pin assignments. Existing PCM1782DBQR boards may not accept PCM1803ADBR without pin-level review.
When should I choose PCM1803ADBR over PCM3010DBR?
Choose PCM1803ADBR when its single-ended 24-bit stereo conversion, 96 kHz maximum rate, 64-times or 128-times oversampling, and integrated high-pass filtering are required by the signal chain. Choose PCM3010DBR when its documented converter features better fit the source amplitude, clocking, filtering, or system architecture. Both are Texas Instruments candidates associated with small-outline stereo ADC designs, so interface and pin verification remains essential.
What can replace PCM1803ADBR without changing the PCB footprint?
PCM1804DBR, PCM1802DBR, PCM1782DBQR, and PCM3010DBR are the identified same-brand candidates for a footprint-oriented review because they are associated with 20-pin audio-converter packages. A mechanically similar package is only the first requirement; confirm pin-to-pin functions, supply levels, clock polarity, data format, decimation behavior, and filtering before approving a replacement. No cross-brand drop-in candidate was established.
What are the key specifications of PCM1803ADBR that engineers should know?
The key PCM1803ADBR specifications are 24-bit resolution, 96 kHz maximum sampling, two single-ended analog channels, a 3 Vp-p input range, selectable 64-times or 128-times oversampling, and integrated decimation and high-pass filters. According to the Texas Instruments product information, the converter also supports master and slave modes and uses a CMOS process. It is packaged in a 20-pin SSOP for surface-mounted audio designs.
Is PCM1803ADBR suitable for USB and portable audio interfaces?
PCM1803ADBR is suitable for compact stereo audio-capture blocks that need 24-bit conversion at up to 96 kHz from single-ended sources. Its serial interface, selectable clock ownership, and integrated high-pass filter can simplify the analog-to-digital portion of a USB, portable, or digital recording interface. The surrounding design still needs a compatible digital audio controller, correct clocking, stable supplies, and an input path sized for the 3 Vp-p analog range.

Справочные инженерные данные для PCM1803ADBR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PCM1803ADBR for a new stereo audio-conversion design that requires 24-bit resolution, a 96 kHz sampling rate, single-ended inputs, selectable 64-times or 128-times oversampling, and flexible master or slave clocking. Choose PCM1804DBR when a directly identified same-family candidate provides a better match for the required clocking, filtering, or timing behavior, after completing a pin-level review. Consider PCM1802DBR or PCM1782DBQR for new designs that meet their exact resolution, filter, and interface requirements. Consider PCM3010DBR when its converter architecture better matches the input and digital-interface needs. Package similarity does not guarantee drop-in suitability: verify analog range, supply, clock polarity, serial format, synchronization, and every assigned pin before approving any substitution.

Сравнение с аналогами

Параметр Этот товар PCM1804DBR PCM1802DBR PCM1782DBQR PCM3010DBR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SSOP-20 SSOP-20 SSOP-20 SSOP-20 SSOP-20
Device Type Stereo delta-sigma ADC Stereo audio ADC Stereo audio ADC Stereo audio ADC Stereo audio ADC

Ключевые отличия

  • Selectable oversampling integrated into a 24-bit stereo converter (против PCM1804DBR)
  • Integrated DC-removal path for single-ended stereo sources (против PCM3010DBR)
  • Explicit master and slave clock modes (против PCM1782DBQR)
  • Single-ended stereo input with 3 Vp-p full-scale range (против PCM1802DBR)

Заметки по проектированию

Route the single-ended stereo inputs as short, impedance-controlled traces away from the serial clock, data lines, and switching-supply nodes. Place input-network components close to the converter pins and maintain a continuous quiet return path between the analog source and device ground. Because the input range is 3 Vp-p, size the preceding amplifier and attenuation network so normal signal peaks remain inside that range without clipping.

Establish whether PCM1803ADBR operates as master or slave before laying out the audio clock network. The selected mode determines whether the converter generates or receives the master clock, and a mismatch can corrupt framing or produce invalid sampling rates. Follow the manufacturer serial-interface timing diagrams for data setup, hold, clock polarity, and synchronization, and avoid adding long stubs or test-point capacitance to the clock net.

Do not assume that two 20-pin stereo ADC packages are interchangeable merely because their footprints match. Before substituting PCM1804DBR, PCM1802DBR, PCM1782DBQR, or PCM3010DBR, compare every pin name, supply requirement, analog input range, clock mode, digital data format, reset or mode behavior, and filter response. The ADC may still fit the footprint while requiring schematic or firmware changes.

Separate analog and digital return-current paths where the board architecture permits and decouple the supply pins according to the manufacturer application guidance. The delta-sigma converter’s clock and data activity can create fast transient currents, so an inductive supply impedance between the source and decoupling capacitor can contaminate conversion performance. Place the closest high-frequency capacitor directly between the relevant supply and ground pins.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance status requires confirmation from the current manufacturer product documentation or the organization’s material-compliance declaration.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PCM1803ADBR datasheet PCM1803ADBR pinout PCM1803ADBR datasheet pdf PCM1803ADBR equivalent PCM1803ADBR replacement PCM1803ADBR cross reference PCM1803ADBR vs PCM1804DBR PCM1803ADBR footprint PCM1803ADBR application circuit Texas Instruments PCM1803ADBR PCM1803ADBR price PCM1803ADBR stock

Связанные компоненты & термины

Texas Instruments PCM1803ADBR PCM1803A PCM1804DBR PCM1802DBR PCM1782DBQR PCM3010DBR PCM1792ADBR PCM1681PWPR PCM3060PWR PCM5142PWR TAS5112DFDR TAS5103DAPR Analog-to-digital converter Audio ADC Delta-sigma modulator Stereo audio converter Single-ended analog input Serial audio interface Master mode Slave mode Oversampling Decimation filter High-pass filter SSOP-20 Surface-mount package CMOS process
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ