PCM1804DBG4 - 24-Bit 192 kHz Stereo Audio ADC | Texas Instruments
Référence : PCM1804DBG4 ✓ ActifPCM1804DBG4 Présentation
An audio ADC converts analog left and right channel voltages into digital PCM data for processing, storage, transmission, or playback. The PCM1804 belongs to the delta-sigma ADC family, using a precision modulator and digital filtering to provide high resolution and linearity in a single integrated circuit. Its fully differential input architecture supports balanced audio sources and helps reduce common-mode noise pickup when the circuit is laid out carefully.
The PCM1804DBG4 supports 24-bit conversion at up to 192 kSPS, making it appropriate for professional audio, USB or digital audio interfaces, broadcast equipment, and instrumentation requiring wide bandwidth. The manufacturer identifies the device as a high-performance stereo A/D converter with PCM audio and DSD-format capability. Its small 28-pin SSOP package helps reduce board area, although careful decoupling and controlled analog layout remain important.
Typical uses include stereo recording interfaces, digital mixers, audio capture cards, microphone preamplifier outputs, consumer audio equipment, and measurement instruments. The differential inputs are intended to be driven with appropriate analog front-end circuits rather than directly with high-voltage line-level signals. Input filtering, reference stability, clock implementation, and digital-interface timing determine whether the converter achieves its intended performance.
The PCM1804DBG4 uses an SSOP package with a pin arrangement that should be checked against the current manufacturer pin-description table before PCB routing. Use the manufacturer datasheet for the definitive electrical limits, recommended application circuit, clock requirements, and exposed-package details. This page summarizes the principal conversion characteristics and identifies compatible replacement candidates for design review.
This page combines the manufacturer product information, distributor availability references, pricing evidence, and practical design considerations into a concise engineering resource. It is intended to help designers evaluate the PCM1804DBG4 for stereo audio conversion while checking the exact ordering suffix and package-specific requirements.
Alternatives de remplacement direct pour PCM1804DBG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
PCM1804DBR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM4202DBR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1804DBG4 Valeurs maximales et caractéristiques électriques
| Device Type | Stereo delta-sigma audio analog-to-digital converter |
| Résolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| Channel Count | 2 channels |
| Input Architecture | Fully differential analog inputs |
| Signal-to-Noise Ratio | 112 dB |
| Output Format | PCM audio and DSD format |
| Converter Architecture | Precision delta-sigma modulator |
| Digital Filter | Linear-phase anti-alias digital filter |
| DC Offset Filter | High-pass filter (HPF) |
| Boîtier | 28-pin SSOP |
| Type de montage | Surface mount |
| Process Technology | Advanced CMOS process |
| Manufacturer Product Classification | Audio A/D converter IC |
| Ordering Suffix | DBG4 |
Guide de configuration des broches du PCM1804DBG4 28-pin ssop
Configuration des broches du PCM1804DBG4 (boîtier 28-pin ssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1804DBG4.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1804DBG4 convient pour 6 applications: Stereo Recording Interface, USB Audio Interface, Digital Mixer and Monitor Controller, Broadcast and Studio Equipment, Consumer High-Resolution Audio, Audio Test and Measurement Instrument.
Stereo Recording Interface
PCM1804DBG4 is suitable for a stereo recording front end that needs 24-bit conversion at up to 192 kSPS. Its fully differential inputs can accept balanced source signals when the surrounding amplifier, protection, and filtering stages are designed appropriately. The converter supports PCM audio and DSD-format operation, allowing the same conversion engine to serve high-resolution recording and compatible digital audio paths. Place input components and the analog return path close to the converter, maintain a stable reference, and follow the TI application circuit for decoupling and grounding.
Recommandé
USB Audio Interface
The 24-bit, 192 kSPS conversion capability of PCM1804DBG4 fits USB audio interfaces that capture stereo program material and require high-resolution digital output. Its differential analog inputs help preserve signal integrity from a balanced analog front end, while the converter’s digital filter behavior and supported audio formats should be matched to the USB audio controller and host clocking scheme. Use controlled layout around the analog section and verify the exact digital interface, master-clock requirements, and sample-rate support in the current TI data sheet.
Recommandé
Digital Mixer and Monitor Controller
A digital mixer or monitor controller can use PCM1804DBG4 to convert two analog channels into high-resolution digital audio data. The 112 dB SNR specification provides a useful foundation for demanding monitoring, broadcast, and mastering-related systems, while 192 kSPS operation supports high-rate processing. The design must account for the converter’s analog input range, reference accuracy, clock distribution, and supported data format. Keep sensitive analog routing compact and isolate converter clock and digital return paths from input nodes.
Recommandé
Broadcast and Studio Equipment
PCM1804DBG4 fits broadcast and studio equipment requiring stereo conversion with 24-bit resolution and a maximum rate of 192 kSPS. The fully differential input architecture is useful for balanced professional audio connections, but the complete signal chain still determines channel balance and noise performance. Use low-noise input amplifiers, controlled gain staging, stable references, and a clean analog ground strategy. The TI manufacturer documentation should define the recommended filter characteristics and the digital interface timing used by the host processor.
Recommandé
Consumer High-Resolution Audio
The PCM1804DBG4 can be used in high-resolution consumer audio equipment that accepts analog stereo sources and requires digital conversion for storage, transmission, or processing. Its 24-bit resolution and 192 kSPS ceiling support modern high-resolution audio workflows, while the small SSOP package helps conserve board area. Because consumer products often combine switching regulators and digital processors, protect the converter with careful analog filtering, a quiet reference arrangement, and grounding that minimizes converter-current coupling into the input path.
Recommandé
Audio Test and Measurement Instrument
PCM1804DBG4 is appropriate for audio measurement equipment that needs a stereo conversion channel with high resolution and a 192 kSPS maximum sampling rate. The differential input arrangement can simplify balanced test-source connections, while the converter’s digital filtering and high-pass behavior must be included in calibration and frequency-response analysis. Maintain a stable excitation clock, characterize input-dependent performance, and apply the manufacturer’s recommended analog network so that the instrument measures the intended signal rather than unintended converter or layout effects.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1804DBG4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1804DBR | PCM4202DBR |
|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
Principaux différenciateurs
- High-resolution stereo conversion in one package (vs PCM4202DBR)
- Fully differential analog input architecture (vs PCM4202DBR)
- PCM and DSD format support (vs PCM4202DBR)
- High-PSR precision converter architecture (vs PCM1804DBR)
Notes de conception
Route the fully differential analog inputs as a compact, symmetric pair and place the input network close to the converter pins. Keep the analog return path continuous and separate it from digital clock and switching-current paths. The goal is to minimize parasitic pickup before the converter's anti-alias and high-pass filtering can be characterized.
Follow the TI recommended supply and reference arrangement, including the required bypass capacitors and the recommended placement of the reference components. A low-noise reference and properly decoupled analog supply are especially important when using the 112 dB SNR capability. Confirm voltage limits, startup behavior, and capacitor values from the current datasheet before layout release.
Treat the converter clock and digital interface as part of the analog signal-integrity design. Use a low-jitter clock source, provide a controlled return path, and avoid routing clock and digital signals beneath sensitive input nodes. Verify the master-clock, frame-clock, and data timing against the host audio controller because interface timing errors can appear as conversion or channel-alignment faults.
Do not assume that a converter with the same generic function is automatically a drop-in replacement. Check the exact package suffix, pin names, supply voltage, clock requirements, digital format, and analog input range. The DBG4 suffix also identifies a particular production packing configuration, so procurement and PCB assembly requirements should be checked alongside electrical compatibility.
Informations de conformité
The available product excerpts identify the PCM1804 as a Texas Instruments audio ADC but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because the part is an audio converter rather than an automotive-qualified device in the supplied records.