Texas Instruments

PCM1804DBG4 - 24-Bit 192 kHz Stereo Audio ADC | Texas Instruments

MPN: PCM1804DBG4 ✓ Aktif
28-pin SSOP Package
MOQ: 1 |

PCM1804DBG4 Ringkasan

Texas Instruments PCM1804DBG4 is a 24-bit stereo delta-sigma audio analog-to-digital converter with a maximum sampling rate of 192 kSPS, fully differential analog inputs, and a 112 dB SNR figure of merit. The device is supplied in a 28-pin SSOP package and is designed for high-fidelity audio capture, digital audio equipment, and signal-chain conversion applications.

An audio ADC converts analog left and right channel voltages into digital PCM data for processing, storage, transmission, or playback. The PCM1804 belongs to the delta-sigma ADC family, using a precision modulator and digital filtering to provide high resolution and linearity in a single integrated circuit. Its fully differential input architecture supports balanced audio sources and helps reduce common-mode noise pickup when the circuit is laid out carefully.

The PCM1804DBG4 supports 24-bit conversion at up to 192 kSPS, making it appropriate for professional audio, USB or digital audio interfaces, broadcast equipment, and instrumentation requiring wide bandwidth. The manufacturer identifies the device as a high-performance stereo A/D converter with PCM audio and DSD-format capability. Its small 28-pin SSOP package helps reduce board area, although careful decoupling and controlled analog layout remain important.

Typical uses include stereo recording interfaces, digital mixers, audio capture cards, microphone preamplifier outputs, consumer audio equipment, and measurement instruments. The differential inputs are intended to be driven with appropriate analog front-end circuits rather than directly with high-voltage line-level signals. Input filtering, reference stability, clock implementation, and digital-interface timing determine whether the converter achieves its intended performance.

The PCM1804DBG4 uses an SSOP package with a pin arrangement that should be checked against the current manufacturer pin-description table before PCB routing. Use the manufacturer datasheet for the definitive electrical limits, recommended application circuit, clock requirements, and exposed-package details. This page summarizes the principal conversion characteristics and identifies compatible replacement candidates for design review.

This page combines the manufacturer product information, distributor availability references, pricing evidence, and practical design considerations into a concise engineering resource. It is intended to help designers evaluate the PCM1804DBG4 for stereo audio conversion while checking the exact ordering suffix and package-specific requirements.

Pilihan pengganti yang segera untuk PCM1804DBG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

PCM1804DBR

✅ Masuk Drop-In
📦 28-pin SSOP
Same PCM1804 converter family and 28-pin SSOP package; ordering suffix and production packing differ, with no verified change to the headline 24-bit, 192 kSPS stereo ADC specifications.

📋 Alternatif rujukan (tidak dalam katalog)

PCM4202DBR

✅ Masuk Drop-In
📦 28-pin SSOP
Same manufacturer and 28-pin SSOP package; the cross-reference identifies a comparable stereo ADC, while resolution, sampling rate, clocking, and digital-interface details require comparison before final substitution.

📋 Alternatif rujukan (tidak dalam katalog)

PCM1804DBG4 Penilaian maksimum & Ciri-ciri Elektrik

Device Type Stereo delta-sigma audio analog-to-digital converter
Pemecahkatan 24 bit
Maximum Sampling Rate 192 kSPS
Channel Count 2 channels
Input Architecture Fully differential analog inputs
Signal-to-Noise Ratio 112 dB
Output Format PCM audio and DSD format
Converter Architecture Precision delta-sigma modulator
Digital Filter Linear-phase anti-alias digital filter
DC Offset Filter High-pass filter (HPF)
Kemasan 28-pin SSOP
Jenis Pemasangan Surface mount
Process Technology Advanced CMOS process
Manufacturer Product Classification Audio A/D converter IC
Ordering Suffix DBG4

Panduan Konfigurasi Pin PCM1804DBG4 28-pin ssop

Konfigurasi pin untuk PCM1804DBG4 (28-pin ssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 28-pin ssop untuk PCM1804DBG4

Tiada data garisan pin yang diperoleh untuk PCM1804DBG4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

PCM1804DBG4 patut untuk 6 aplikasis: Stereo Recording Interface, USB Audio Interface, Digital Mixer and Monitor Controller, Broadcast and Studio Equipment, Consumer High-Resolution Audio, Audio Test and Measurement Instrument.

🎙️

Stereo Recording Interface

PCM1804DBG4 is suitable for a stereo recording front end that needs 24-bit conversion at up to 192 kSPS. Its fully differential inputs can accept balanced source signals when the surrounding amplifier, protection, and filtering stages are designed appropriately. The converter supports PCM audio and DSD-format operation, allowing the same conversion engine to serve high-resolution recording and compatible digital audio paths. Place input components and the analog return path close to the converter, maintain a stable reference, and follow the TI application circuit for decoupling and grounding.

💻

USB Audio Interface

The 24-bit, 192 kSPS conversion capability of PCM1804DBG4 fits USB audio interfaces that capture stereo program material and require high-resolution digital output. Its differential analog inputs help preserve signal integrity from a balanced analog front end, while the converter’s digital filter behavior and supported audio formats should be matched to the USB audio controller and host clocking scheme. Use controlled layout around the analog section and verify the exact digital interface, master-clock requirements, and sample-rate support in the current TI data sheet.

🎛️

Digital Mixer and Monitor Controller

A digital mixer or monitor controller can use PCM1804DBG4 to convert two analog channels into high-resolution digital audio data. The 112 dB SNR specification provides a useful foundation for demanding monitoring, broadcast, and mastering-related systems, while 192 kSPS operation supports high-rate processing. The design must account for the converter’s analog input range, reference accuracy, clock distribution, and supported data format. Keep sensitive analog routing compact and isolate converter clock and digital return paths from input nodes.

📻

Broadcast and Studio Equipment

PCM1804DBG4 fits broadcast and studio equipment requiring stereo conversion with 24-bit resolution and a maximum rate of 192 kSPS. The fully differential input architecture is useful for balanced professional audio connections, but the complete signal chain still determines channel balance and noise performance. Use low-noise input amplifiers, controlled gain staging, stable references, and a clean analog ground strategy. The TI manufacturer documentation should define the recommended filter characteristics and the digital interface timing used by the host processor.

🎧

Consumer High-Resolution Audio

The PCM1804DBG4 can be used in high-resolution consumer audio equipment that accepts analog stereo sources and requires digital conversion for storage, transmission, or processing. Its 24-bit resolution and 192 kSPS ceiling support modern high-resolution audio workflows, while the small SSOP package helps conserve board area. Because consumer products often combine switching regulators and digital processors, protect the converter with careful analog filtering, a quiet reference arrangement, and grounding that minimizes converter-current coupling into the input path.

🖥️

Audio Test and Measurement Instrument

PCM1804DBG4 is appropriate for audio measurement equipment that needs a stereo conversion channel with high resolution and a 192 kSPS maximum sampling rate. The differential input arrangement can simplify balanced test-source connections, while the converter’s digital filtering and high-pass behavior must be included in calibration and frequency-response analysis. Maintain a stable excitation clock, characterize input-dependent performance, and apply the manufacturer’s recommended analog network so that the instrument measures the intended signal rather than unintended converter or layout effects.

What is PCM1804DBG4?
PCM1804DBG4 is a Texas Instruments 24-bit stereo delta-sigma audio ADC with fully differential inputs, 192 kSPS maximum sampling, 112 dB SNR, and a 28-pin SSOP package. According to the TI PCM1804 product page, it is a high-performance single-chip stereo A/D converter that supports PCM audio and DSD-format operation.
What are the key specifications of PCM1804DBG4 that engineers should know?
The PCM1804DBG4 provides 24-bit resolution, two stereo channels, a maximum sampling rate of 192 kSPS, fully differential analog inputs, and 112 dB SNR. TI identifies the device as a precision delta-sigma converter using an advanced CMOS process, with a linear-phase anti-alias digital filter and a DC-offset-removing high-pass filter.
How many pins does PCM1804DBG4 have?
PCM1804DBG4 has 28 pins in an SSOP package. The package is identified as a 28-pin SSOP by the distributor product listing, while the manufacturer datasheet should be used for the exact numbered pin names, exposed-pad details, and recommended land pattern before a layout is released.
Where can I download the PCM1804DBG4 datasheet PDF?
The official PCM1804 product and datasheet information is available from the Texas Instruments product page at https://www.ti.com/product/PCM1804. The search results also identify a third-party PDF copy, but the TI page is the preferred source for the current electrical characteristics, pin description, application circuit, and ordering information.
Where can I find the PCM1804DBG4 pinout?
The definitive PCM1804DBG4 pinout is shown in the TI PCM1804 datasheet and should be matched to the 28-pin SSOP footprint during PCB design. Use the pin-description table to assign analog inputs, supplies, references, clock signals, and digital data or control functions; the target ordering suffix must also be checked against the package drawing.
Is PCM1804DBG4 suitable for high-fidelity stereo audio?
Yes, PCM1804DBG4 is suitable for high-fidelity stereo audio capture because it combines 24-bit resolution, 192 kSPS maximum sampling, 112 dB SNR, and fully differential inputs. The actual system performance still depends on the analog front end, reference supply, clock quality, grounding, and digital signal implementation.
What applications use PCM1804DBG4?
PCM1804DBG4 is used in stereo recording interfaces, digital mixers, audio capture equipment, broadcast systems, USB audio products, consumer audio gear, and test instruments. Its fully differential inputs are particularly useful when the source can be balanced and the PCB can provide controlled analog routing.
What is the difference between PCM1804DBG4 and PCM1804DBR?
PCM1804DBG4 and PCM1804DBR identify different ordering or packaging configurations of the PCM1804 family rather than different converter architectures. The exact shipping form and reel or tube designation should be confirmed from TI ordering information; verify the package, pinout, and ordering suffix before substituting one for the other.
Can PCM4202DBR replace PCM1804DBG4?
PCM4202DBR is a candidate to evaluate for a PCM1804DBG4 replacement, but the cross-reference listing alone does not establish every pin, clock, digital-interface, and performance condition. Confirm the complete PCM1804DBG4 pinout and the PCM4202DBR data sheet, especially the digital interface and analog input requirements, before approving a substitution.
When should I choose PCM1804DBG4 over PCM1804DBR?
Choose PCM1804DBG4 when the required PCM1804 ordering configuration, package, and production packing match that exact suffix. Choose PCM1804DBR when the PCB and assembly plan require the corresponding ordering configuration. For either part, verify the manufacturer ordering table because the suffix controls more than the generic converter function.
What is the best drop-in replacement for PCM1804DBG4?
No five-part drop-in replacement set is established by the available cross-reference information. The closest candidates identified for engineering review are PCM1804DBR and PCM4202DBR, but a drop-in claim requires verification of the SSOP footprint, pin mapping, supply voltage, clocking, digital format, and converter performance in the current manufacturer data sheets.
Is PCM1804DBG4 the same as PCM4202DBR?
PCM1804DBG4 and PCM4202DBR are related audio ADC candidates, but they should not be treated as identical without a detailed comparison. The available comparison identifies both as stereo audio conversion devices, while the detailed replacement decision must include pin compatibility, resolution, sampling rate, interface format, clocking, and analog input conditions.
How do I design the analog input for PCM1804DBG4?
Design the analog path around the fully differential input architecture and keep the converter input network close to the device. Use a stable reference and clean supply arrangement, route analog and digital returns carefully, and follow the TI application circuit and layout recommendations for decoupling, grounding, and input filtering.
Does PCM1804DBG4 need a heatsink?
The PCM1804DBG4 is a low-power audio converter and normally does not require a heatsink when operated within its specified supply and temperature limits. Final thermal validation should use the maximum expected power dissipation, ambient temperature, PCB copper area, and the manufacturer thermal data; these values are not specified in the available search excerpts.
Where can I buy PCM1804DBG4 and what is the current price?
Use the Request a Quote form on this XAIPART page to request PCM1804DBG4 pricing, stock confirmation, and lead time. The manufacturer page and distributor listings identify the part as available for sourcing, but current commercial terms can change and are not fixed in the technical product record.

Data referensi kejuruteraan untuk PCM1804DBG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose PCM1804DBG4 for a new design requiring a stereo, fully differential audio ADC with 24-bit resolution, up to 192 kSPS sampling, 112 dB SNR, and PCM or DSD-format capability. Its 28-pin SSOP package is appropriate when board area is important and the analog layout can be controlled. PCM1804DBR is the closest same-family alternative when its exact ordering and production packing requirements fit the design. Evaluate PCM4202DBR only after verifying its pin mapping, clocking, digital interface, supply requirements, and analog performance against the PCM1804DBG4. The available cross-reference information does not support a broad set of confirmed drop-in replacements, so any substitution should begin with a manufacturer data-sheet comparison and end with prototype validation.

Perbandingan dengan Gantian

Parametr Produk Ini PCM1804DBR PCM4202DBR
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments

Penyeberangsung Jelas

  • High-resolution stereo conversion in one package (vsPCM4202DBR)
  • Fully differential analog input architecture (vsPCM4202DBR)
  • PCM and DSD format support (vsPCM4202DBR)
  • High-PSR precision converter architecture (vsPCM1804DBR)

Catatan Desain

Route the fully differential analog inputs as a compact, symmetric pair and place the input network close to the converter pins. Keep the analog return path continuous and separate it from digital clock and switching-current paths. The goal is to minimize parasitic pickup before the converter's anti-alias and high-pass filtering can be characterized.

Follow the TI recommended supply and reference arrangement, including the required bypass capacitors and the recommended placement of the reference components. A low-noise reference and properly decoupled analog supply are especially important when using the 112 dB SNR capability. Confirm voltage limits, startup behavior, and capacitor values from the current datasheet before layout release.

Treat the converter clock and digital interface as part of the analog signal-integrity design. Use a low-jitter clock source, provide a controlled return path, and avoid routing clock and digital signals beneath sensitive input nodes. Verify the master-clock, frame-clock, and data timing against the host audio controller because interface timing errors can appear as conversion or channel-alignment faults.

Do not assume that a converter with the same generic function is automatically a drop-in replacement. Check the exact package suffix, pin names, supply voltage, clock requirements, digital format, and analog input range. The DBG4 suffix also identifies a particular production packing configuration, so procurement and PCB assembly requirements should be checked alongside electrical compatibility.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product excerpts identify the PCM1804 as a Texas Instruments audio ADC but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because the part is an audio converter rather than an automotive-qualified device in the supplied records.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

PCM1804DBG4 datasheet PCM1804DBG4 datasheet pdf PCM1804DBG4 pinout PCM1804DBG4 equivalent PCM1804DBG4 replacement PCM1804DBG4 vs PCM1804DBR PCM1804DBG4 vs PCM4202DBR PCM1804DBG4 price PCM1804DBG4 stock Texas Instruments PCM1804DBG4 PCM1804DBG4 24 bit 192 kSPS PCM1804DBG4 28 pin SSOP PCM1804DBG4 audio ADC PCM1804DBG4 application circuit PCM1804DBG4 drop-in replacement

Komponen dan Tanda berkaitan

Texas Instruments PCM1804DBG4 PCM1804DBR PCM4202DBR PCM1792ADBR PCM1782DBQR PCM1681PWPR TAS5112DFDR TAS5103DAPR ADS8519IDB ADS1262IPW stereo audio ADC delta-sigma ADC analog-to-digital converter fully differential input 24-bit conversion 192 kSPS 112 dB SNR PCM audio DSD format anti-alias digital filter high-pass filter 28-pin SSOP SSOP package family surface-mount package advanced CMOS process audio recording interface digital mixer USB audio interface broadcast equipment audio test and measurement input noise master clock reference voltage
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ