Broadcom

PEX8613-BA50BI - 12-Lane PCIe Gen 2 Switch | Broadcom

Référence : PEX8613-BA50BI ✓ Actif
MOQ : 1 |

PEX8613-BA50BI Présentation

Broadcom PEX8613-BA50BI is a PCI Express Gen 2 switch IC with 12 lanes, 3 ports, and a maximum link rate of 5.0 GT/s. The device is intended for systems that require multiple PCI Express links to be switched between a host or endpoint and downstream devices. It supports the PCI Express Base Specification r2.0 and is backward compatible with r1.1 and r1.0a, providing a practical migration path for systems built around earlier-generation PCI Express designs.

A PCI Express switch is a semiconductor in the interface-IC and semiconductor hierarchy that routes high-speed serial transactions among a root complex, endpoint devices, and expansion adapters. Unlike a simple connector or protocol translator, the PEX8613 integrates lane management, configuration handling, buffering, and traffic steering so that multiple PCI Express links can share a system interconnect. Its three-port architecture allows designers to construct fanout arrangements for storage, networking, graphics, or accelerator cards.

Key features include support for auto-negotiation, lane reversal, and polarity reversal. Auto-negotiation permits the switch and connected devices to establish the highest mutually supported link rate and width. Lane reversal supports boards whose routing differs from the conventional lane order, while polarity reversal assists compatibility with interconnect implementations that invert the receiver and transmitter signals. These features can simplify board-level integration and improve tolerance of routing or cable-related signal variations.

The manufacturer product brief identifies the PEX 8613 as a fully compliant PCI Express Base Specification r2.0 device and states that it is backward compatible with r1.1 and r1.0a. It was also designed for Microsoft Vista compliance, an important historical system requirement at the time of introduction. These compatibility features broaden its usefulness in legacy industrial, communications, and embedded platforms that need centralized PCI Express switching rather than a modern host-bridged topology.

Typical applications include PCI Express expansion systems, multi-device embedded controllers, storage and networking adapters, industrial equipment with multiple high-speed peripherals, and compact backplane systems. The 12-lane, 3-port arrangement is useful when a system must balance bandwidth across several links while preserving backward compatibility with older endpoint hardware. The industrial-temperature ordering also makes the device relevant to equipment where ambient temperature requirements exceed ordinary commercial operating limits.

Designers should use the manufacturer pin-description and reference-material sections when assigning the 324-pin ball-grid-array connections and PCB footprint details. Preserve the documented lane and reference-clock assignments, provide the required power rails with appropriate decoupling, and validate signal-integrity, thermal, and PCIe compliance behavior at the intended link rate before production release.

This page organizes the PEX8613-BA50BI specifications, sourcing questions, compatibility details, application guidance, and the confirmed PEX8613-BA50BCG same-family alternative. It also distinguishes documented capabilities from parameters that must be confirmed in the complete manufacturer datasheet before schematic release or production qualification.

Alternatives de remplacement direct pour PEX8613-BA50BI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

PEX8613-BA50BCG

✅ Remplacement direct
📦 324-PBGA (19x19)
Same 12-lane, 3-port Gen 2 switch and 324-PBGA package, but the BC suffix denotes a different temperature ordering option from the BI industrial-temperature suffix.

📋 Alternative de référence (hors catalogue)

PEX8613-BA50BI Valeurs maximales et caractéristiques électriques

Product Type PCI Express switch IC
PCI Express Generation Gen 2
Maximum Link Rate 5.0 GT/s
Total Lane Configuration 12 lanes
Port Count 3 ports
PCI Express Base Specification Support Revision 2.0
Backward Compatibility PCI Express Base Specification r1.1 and r1.0a
Auto-Negotiation Supported
Lane Reversal Supported
Polarity Reversal Supported
Operating Temperature Class Industrial temperature
Lead-Free Status Green lead-free

Guide de configuration des broches du PEX8613-BA50BI standard

Configuration des broches du PEX8613-BA50BI (boîtier standard). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier standard pour le PEX8613-BA50BI

Aucune donnée de brochage détaillée disponible pour PEX8613-BA50BI.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

PEX8613-BA50BI convient pour 6 applications: Embedded PCI Express Expansion, Industrial Control Systems, Storage Controller Aggregation, Networking and Communications Equipment, Legacy PCI Express Migration, Compact Backplane Systems.

🔧

Embedded PCI Express Expansion

The PEX8613-BA50BI fits embedded expansion systems that need one host-facing PCI Express link to feed several peripheral links. Its 12 lanes and 3 ports provide a managed switching architecture instead of requiring separate point-to-point routing for every endpoint. According to the manufacturer product brief, auto-negotiation lets connected devices establish their supported width and rate, while lane reversal and polarity reversal increase implementation flexibility. Designers should assign lane groups deliberately and validate the reference clock, reset behavior, power sequencing, and signal-integrity margins before release.

🏭

Industrial Control Systems

PEX8613-BA50BI is appropriate for industrial control platforms that combine several high-speed peripherals on one compact board. The industrial-temperature ordering distinguishes it from the PEX8613-BA50BCG commercial-temperature option, making it more relevant where equipment operates across demanding ambient conditions. Its PCI Express r2.0 compliance and backward compatibility with r1.1 and r1.0a allow older endpoint modules to coexist with newer traffic. Thermal validation should include the complete switch, regulator design, enclosure airflow, and worst-case lane activity.

🖥️

Storage Controller Aggregation

The three-port PEX8613-BA50BI can aggregate PCI Express storage adapters behind a common switched link in an embedded storage appliance. The 12-lane architecture distributes lane resources among the host and downstream devices, while auto-negotiation accommodates controllers operating below the maximum Gen 2 rate of 5.0 GT/s. Because switched storage traffic can create burst-heavy workloads, the design should examine transmitter equalization, connector and trace loss, reference-clock quality, thermal rise, and recovery behavior under sustained transfers.

🌐

Networking and Communications Equipment

PEX8613-BA50BI can support communications equipment that needs several PCI Express fabrics for Ethernet controllers, storage, or accelerator peripherals. Its PCI Express switch function consolidates traffic behind a three-port topology without relying on a conventional host bridge for each endpoint. The manufacturer product brief confirms r2.0 operation, auto-negotiation, lane reversal, and polarity reversal, all of which help during mixed-vendor board integration. System engineers should still verify device-tree routing, interrupt assignment, BAR mapping, and operating-system driver expectations.

📱

Legacy PCI Express Migration

PEX8613-BA50BI supports migration in equipment that combines Gen 2 infrastructure with endpoints designed for PCI Express r1.1 or r1.0a. The switch maintains compatibility across those specification revisions and can negotiate the usable link rate and width automatically. This makes it useful for long-life industrial and communications platforms that cannot replace every legacy peripheral at once. Migration planning should include lane-width asymmetry, firmware or driver support, boot behavior, and validation at each speed present in the installed endpoint population.

✈️

Compact Backplane Systems

PEX8613-BA50BI can serve as the central PCIe routing element in a compact backplane that connects processors, adapters, and service modules. Its three ports and 12 total lanes support structured fanout while retaining compatibility with older PCI Express devices. Lane reversal and polarity reversal are particularly useful when board-to-board routing must accommodate connector orientation or signal-path variations. A production design should follow the manufacturer reference material for reference-clock distribution, reset sequencing, power-plane partitioning, and high-speed layout, followed by compliance testing on the finished backplane.

What is the PEX8613-BA50BI?
The PEX8613-BA50BI is a Broadcom PCI Express switch IC with 12 lanes, 3 ports, and support for PCI Express Gen 2 operation at up to 5.0 GT/s. According to the manufacturer product brief, it complies with PCI Express Base Specification r2.0 and is backward compatible with r1.1 and r1.0a. It also supports auto-negotiation, lane reversal, and polarity reversal for flexible system integration.
How many PCIe lanes and ports does the PEX8613-BA50BI have?
The PEX8613-BA50BI provides a 12-lane, 3-port PCI Express switching architecture. According to the Broadcom PEX 8613 product brief, the device is a Gen 2 switch capable of operation at 5.0 GT/s. The three ports allow a system to route traffic among multiple PCI Express links while supporting endpoint hardware based on earlier PCI Express specifications.
What PCI Express specifications are supported by PEX8613-BA50BI?
The PEX8613-BA50BI supports PCI Express Base Specification r2.0 and remains backward compatible with r1.1 and r1.0a. According to the manufacturer product brief, the device also supports auto-negotiation, lane reversal, and polarity reversal. These capabilities make it suitable for mixed-generation embedded systems and expansion platforms that need a managed switch rather than a direct point-to-point connection.
Is PEX8613-BA50BI suitable for industrial systems?
Yes, the PEX8613-BA50BI is identified as an industrial-temperature ordering of the PEX8613 switch. According to the Broadcom product and distributor documentation, the suffix denotes industrial-temperature operation and a green lead-free construction. The complete manufacturer documentation should be checked for the exact minimum and maximum ambient-temperature ratings before the device is qualified for a specific enclosure or thermal environment.
Where can I download the PEX8613-BA50BI datasheet PDF?
The PEX8613-BA50BI datasheet PDF is accessible through the Broadcom PEX 8613 manufacturer product-brief link shown on this page. The document describes the 12-lane, 3-port, 5.0 GT/s switch and its PCI Express r2.0 compliance. Use the pin-description table and application information in that document to validate the target footprint, power architecture, clocking, and lane assignments before schematic release.
Where can I find the PEX8613-BA50BI pinout?
The exact PEX8613-BA50BI pinout should be taken from the pin-description table in the Broadcom PEX 8613 documentation. The PEX8613 family is associated with a 324-pin PBGA package, but engineers should confirm that the mechanical drawing and ball map for this ordering code match their board revision. Do not assign signals from a third-party board photograph because exposed, thermal, and no-connect balls must be verified against the manufacturer document.
Where can I buy PEX8613-BA50BI online?
Use the Request a Quote form on this page to request PEX8613-BA50BI pricing, current inventory, and lead time from XAIPART. The part is identified as a Broadcom PEX8613 Gen 2 switch with 12 lanes and 3 ports. A quotation request allows the exact suffix, package, quantity, delivery requirements, and traceability needs to be confirmed before an order is placed.
What is the price of PEX8613-BA50BI?
Current PEX8613-BA50BI pricing is handled through the Request a Quote form on this page. The form can establish the unit cost for the requested quantity along with available supply and shipment terms. Confirm that the quotation identifies the complete PEX8613-BA50BI ordering code and the intended production quantity so that quantity breaks, lifecycle status, and delivery conditions are evaluated consistently.
What is the lead time for PEX8613-BA50BI?
The current lead time for PEX8613-BA50BI must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package form, production status, and component availability. Submit the required quantity, target delivery date, and acceptable packaging format so the supply team can provide a lead-time estimate tied to the exact component rather than to the broader PEX8613 family.
Is PEX8613-BA50BI in stock?
Current stock for PEX8613-BA50BI should be requested through the Request a Quote form on this page. The form can provide an availability response for the required quantity and confirm whether an allocation can be made against your production schedule. Include the date by which material must arrive and any lot-traceability or date-code requirements when submitting the request.
What is the best drop-in replacement for PEX8613-BA50BI?
The closest documented same-family drop-in candidate is the Broadcom PEX8613-BA50BCG, which uses the same 324-PBGA family package and provides a 12-lane, 3-port Gen 2 PCI Express switch. Its key distinction is the ordering-temperature option rather than the basic PCIe architecture. Verify the temperature grade, pin map, firmware requirements, and lifecycle status against the complete Broadcom documentation before substitution.
Can PEX8613-BA50BCG replace PEX8613-BA50BI?
PEX8613-BA50BCG is a plausible same-package substitute because it is another Broadcom PEX8613 12-lane, 3-port Gen 2 switch offered in a 324-PBGA package. According to the product listings, the principal ordering-code difference concerns the temperature option: the target is identified as industrial temperature, while the BCG variant uses a different suffix. Qualification must confirm that the selected temperature grade meets the system requirement.
What can replace PEX8613-BA50BI?
The only directly documented same-family replacement candidate found for PEX8613-BA50BI is the Broadcom PEX8613-BA50BCG. It preserves the 12-lane, 3-port PCI Express Gen 2 configuration and 324-PBGA package, while changing the ordering-code temperature designation. Confirm electrical limits, pin compatibility, temperature grade, reference design, and software requirements in the manufacturer documentation before approving it as a drop-in replacement.
PEX8613-BA50BI vs PEX8613-BA50BCG: which is better?
Choose PEX8613-BA50BI when the system requires its industrial-temperature ordering option; choose PEX8613-BA50BCG only after confirming its temperature grade satisfies the application. Both parts are identified as Broadcom 12-lane, 3-port Gen 2 PCI Express switches in a 324-PBGA package. The comparison therefore turns principally on order-code qualification rather than lane count, port count, or nominal 5.0 GT/s operation.
When should I choose PEX8613-BA50BI instead of PEX8613-BA50BCG?
Choose PEX8613-BA50BI when the product specification requires an industrial-temperature PEX8613 configuration. Both documented alternatives use the same core switch concept, with 12 lanes, 3 ports, Gen 2 operation, and a 324-PBGA package. Before selecting either ordering code, compare its exact temperature ratings, electrical limits, reference-design requirements, and availability using the complete Broadcom documentation.
Is PEX8613-BA50BI suitable for a multi-device embedded controller?
Yes, PEX8613-BA50BI is suitable for a multi-device embedded controller that needs to fan several PCI Express links through a managed three-port switch. Its 12-lane configuration and support for auto-negotiation, lane reversal, and polarity reversal are useful when connected devices differ in lane capability or board routing. The final design must still be validated for lane mapping, clock topology, power sequencing, and signal integrity.
What are the key specifications of PEX8613-BA50BI that engineers should know?
The key PEX8613-BA50BI specifications are 12 lanes, 3 ports, PCI Express Gen 2 operation at up to 5.0 GT/s, and compliance with PCI Express Base Specification r2.0. According to the manufacturer product brief, the device also supports r1.1 and r1.0a backward compatibility, auto-negotiation, lane reversal, polarity reversal, and an industrial-temperature ordering option.

Données de référence d'ingénierie pour PEX8613-BA50BI — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose PEX8613-BA50BI when an industrial system needs a 12-lane, 3-port PCI Express Gen 2 switch and the industrial-temperature ordering is required. Its documented support for PCI Express r2.0, backward compatibility with r1.1 and r1.0a, auto-negotiation, lane reversal, and polarity reversal makes it appropriate for mixed-generation embedded, industrial, storage, and communications platforms. PEX8613-BA50BCG is the closest documented same-package alternative because it preserves the 12-lane, 3-port, 5.0 GT/s switch configuration and 324-PBGA footprint. Select that BC suffix only after verifying that its temperature grade and ordering requirements satisfy the equipment specification. Before either choice, validate the exact pin map, power rails, reference-clock design, firmware expectations, and signal-integrity performance against the complete Broadcom documentation.

Comparaison avec les alternatives

Paramètre Ce produit PEX8613-BA50BCG
Brand Broadcom Broadcom
Device Type PCI Express switch IC PCI Express switch IC
PCI Express Generation Gen 2 Gen 2
Maximum Link Rate 5.0 GT/s 5.0 GT/s
Lane Count 12 lanes 12 lanes
Port Count 3 ports 3 ports
Temperature Ordering Option Industrial temperature BC suffix; exact temperature grade requires confirmation
PCI Express Base Specification r2.0 r2.0
Backward Compatibility r1.1 and r1.0a r1.1 and r1.0a
Auto-Negotiation Supported Supported
Lane Reversal Supported Supported

Principaux différenciateurs

  • Maintains the same fundamental PCIe switch configuration (vs PEX8613-BA50BCG)
  • Offers an industrial-temperature ordering option (vs PEX8613-BA50BCG)
  • Supports migration across three PCIe specification revisions (vs PEX8613-BA50BCG)

Notes de conception

Use the manufacturer reference material for the exact ball map, lane assignments, reference-clock connections, and exposed or no-connect positions. Keep high-speed differential routes short, continuous through matched layers, and away from unrelated switching or high-current paths. Confirm connector and package escape geometry before fixing the PCB footprint because a 324-PBGA design leaves limited room for layer-transition corrections.

Partition the core and I/O supplies as specified by the manufacturer and place required bulk and high-frequency decoupling capacitors at the associated package balls. Confirm capacitor voltage rating, dielectric behavior, and DC-bias derating. Power-up and power-down sequencing must comply with the manufacturer requirements, especially when downstream devices depend on deterministic reset and supply ordering.

Assess the switch under worst-case PCIe traffic, maximum configured lanes, and the highest expected ambient temperature. Preserve the package's specified thermal-via pattern and provide copper area where the mechanical drawing permits it. Account for adjacent regulator and memory heat in compact industrial assemblies, and use the manufacturer's thermal model to determine whether additional airflow or heat spreading is necessary.

Do not infer the complete pinout, electrical limits, or temperature range from a distributor category label. Validate lane reversal and polarity reversal behavior in the intended system configuration, and test mixed-width or reduced-speed endpoints to confirm auto-negotiation. Also verify legacy operating-system and driver expectations because older PCIe specifications describe a different system environment than current platforms.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Yes
Sans halogène
Unknown
Minerais de conflit
Unknown

The ordering-code listing identifies PEX8613-BA50BI-G as green lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status are not established by the available product text.

Données vérifiées le : 2026-11-11 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

PEX8613-BA50BI datasheet PEX8613-BA50BI datasheet pdf PEX8613-BA50BI pinout PEX8613-BA50BI specifications Broadcom PEX8613-BA50BI PEX8613-BA50BI 12 lane 3 port PEX8613-BA50BI PCIe Gen 2 switch PEX8613-BA50BI PBGA footprint PEX8613-BA50BI industrial temperature PEX8613-BA50BI application circuit PEX8613-BA50BI replacement PEX8613-BA50BI vs PEX8613-BA50BCG PEX8613-BA50BI price PEX8613-BA50BI stock PEX8613-BA50BI equivalent

Composants & termes associés

Broadcom PEX8613-BA50BI PEX8613-BA50BI-G PEX8613-BA50BCG PCI Express switch PCIe switch IC interface IC semiconductor 12-lane PCIe switch 3-port PCIe switch PCI Express Gen 2 5.0 GT/s PCI Express Base Specification r2.0 auto-negotiation lane reversal polarity reversal 324-PBGA ball grid array surface-mount package industrial temperature green lead-free embedded expansion system industrial control system PCI Express storage
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ