PEX8613-BA50BI - 12-Lane PCIe Gen 2 Switch | Broadcom
MPN: PEX8613-BA50BI ✓ Hoạt độngPEX8613-BA50BI Tóm tắt
A PCI Express switch is a semiconductor in the interface-IC and semiconductor hierarchy that routes high-speed serial transactions among a root complex, endpoint devices, and expansion adapters. Unlike a simple connector or protocol translator, the PEX8613 integrates lane management, configuration handling, buffering, and traffic steering so that multiple PCI Express links can share a system interconnect. Its three-port architecture allows designers to construct fanout arrangements for storage, networking, graphics, or accelerator cards.
Key features include support for auto-negotiation, lane reversal, and polarity reversal. Auto-negotiation permits the switch and connected devices to establish the highest mutually supported link rate and width. Lane reversal supports boards whose routing differs from the conventional lane order, while polarity reversal assists compatibility with interconnect implementations that invert the receiver and transmitter signals. These features can simplify board-level integration and improve tolerance of routing or cable-related signal variations.
The manufacturer product brief identifies the PEX 8613 as a fully compliant PCI Express Base Specification r2.0 device and states that it is backward compatible with r1.1 and r1.0a. It was also designed for Microsoft Vista compliance, an important historical system requirement at the time of introduction. These compatibility features broaden its usefulness in legacy industrial, communications, and embedded platforms that need centralized PCI Express switching rather than a modern host-bridged topology.
Typical applications include PCI Express expansion systems, multi-device embedded controllers, storage and networking adapters, industrial equipment with multiple high-speed peripherals, and compact backplane systems. The 12-lane, 3-port arrangement is useful when a system must balance bandwidth across several links while preserving backward compatibility with older endpoint hardware. The industrial-temperature ordering also makes the device relevant to equipment where ambient temperature requirements exceed ordinary commercial operating limits.
Designers should use the manufacturer pin-description and reference-material sections when assigning the 324-pin ball-grid-array connections and PCB footprint details. Preserve the documented lane and reference-clock assignments, provide the required power rails with appropriate decoupling, and validate signal-integrity, thermal, and PCIe compliance behavior at the intended link rate before production release.
This page organizes the PEX8613-BA50BI specifications, sourcing questions, compatibility details, application guidance, and the confirmed PEX8613-BA50BCG same-family alternative. It also distinguishes documented capabilities from parameters that must be confirmed in the complete manufacturer datasheet before schematic release or production qualification.
Bộ thay thế dễ dàng lắp đặt cho PEX8613-BA50BI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
PEX8613-BA50BCG
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PEX8613-BA50BI Tỷ lệ tối đa & tính chất điện
| Product Type | PCI Express switch IC |
| PCI Express Generation | Gen 2 |
| Maximum Link Rate | 5.0 GT/s |
| Total Lane Configuration | 12 lanes |
| Port Count | 3 ports |
| PCI Express Base Specification Support | Revision 2.0 |
| Backward Compatibility | PCI Express Base Specification r1.1 and r1.0a |
| Auto-Negotiation | Supported |
| Lane Reversal | Supported |
| Polarity Reversal | Supported |
| Operating Temperature Class | Industrial temperature |
| Lead-Free Status | Green lead-free |
Hướng dẫn cấu hình chân PEX8613-BA50BI standard
Cấu hình chân cho PEX8613-BA50BI (standard gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PEX8613-BA50BI.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PEX8613-BA50BI phù hợp cho 6 Áp dụngs: Embedded PCI Express Expansion, Industrial Control Systems, Storage Controller Aggregation, Networking and Communications Equipment, Legacy PCI Express Migration, Compact Backplane Systems.
Embedded PCI Express Expansion
The PEX8613-BA50BI fits embedded expansion systems that need one host-facing PCI Express link to feed several peripheral links. Its 12 lanes and 3 ports provide a managed switching architecture instead of requiring separate point-to-point routing for every endpoint. According to the manufacturer product brief, auto-negotiation lets connected devices establish their supported width and rate, while lane reversal and polarity reversal increase implementation flexibility. Designers should assign lane groups deliberately and validate the reference clock, reset behavior, power sequencing, and signal-integrity margins before release.
Industrial Control Systems
PEX8613-BA50BI is appropriate for industrial control platforms that combine several high-speed peripherals on one compact board. The industrial-temperature ordering distinguishes it from the PEX8613-BA50BCG commercial-temperature option, making it more relevant where equipment operates across demanding ambient conditions. Its PCI Express r2.0 compliance and backward compatibility with r1.1 and r1.0a allow older endpoint modules to coexist with newer traffic. Thermal validation should include the complete switch, regulator design, enclosure airflow, and worst-case lane activity.
Storage Controller Aggregation
The three-port PEX8613-BA50BI can aggregate PCI Express storage adapters behind a common switched link in an embedded storage appliance. The 12-lane architecture distributes lane resources among the host and downstream devices, while auto-negotiation accommodates controllers operating below the maximum Gen 2 rate of 5.0 GT/s. Because switched storage traffic can create burst-heavy workloads, the design should examine transmitter equalization, connector and trace loss, reference-clock quality, thermal rise, and recovery behavior under sustained transfers.
Networking and Communications Equipment
PEX8613-BA50BI can support communications equipment that needs several PCI Express fabrics for Ethernet controllers, storage, or accelerator peripherals. Its PCI Express switch function consolidates traffic behind a three-port topology without relying on a conventional host bridge for each endpoint. The manufacturer product brief confirms r2.0 operation, auto-negotiation, lane reversal, and polarity reversal, all of which help during mixed-vendor board integration. System engineers should still verify device-tree routing, interrupt assignment, BAR mapping, and operating-system driver expectations.
Legacy PCI Express Migration
PEX8613-BA50BI supports migration in equipment that combines Gen 2 infrastructure with endpoints designed for PCI Express r1.1 or r1.0a. The switch maintains compatibility across those specification revisions and can negotiate the usable link rate and width automatically. This makes it useful for long-life industrial and communications platforms that cannot replace every legacy peripheral at once. Migration planning should include lane-width asymmetry, firmware or driver support, boot behavior, and validation at each speed present in the installed endpoint population.
Compact Backplane Systems
PEX8613-BA50BI can serve as the central PCIe routing element in a compact backplane that connects processors, adapters, and service modules. Its three ports and 12 total lanes support structured fanout while retaining compatibility with older PCI Express devices. Lane reversal and polarity reversal are particularly useful when board-to-board routing must accommodate connector orientation or signal-path variations. A production design should follow the manufacturer reference material for reference-clock distribution, reset sequencing, power-plane partitioning, and high-speed layout, followed by compliance testing on the finished backplane.
Dữ liệu tham khảo kỹ thuật cho PEX8613-BA50BI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PEX8613-BA50BCG |
|---|---|---|
| Brand | Broadcom | Broadcom |
| Device Type | PCI Express switch IC | PCI Express switch IC |
| PCI Express Generation | Gen 2 | Gen 2 |
| Maximum Link Rate | 5.0 GT/s | 5.0 GT/s |
| Lane Count | 12 lanes | 12 lanes |
| Port Count | 3 ports | 3 ports |
| Temperature Ordering Option | Industrial temperature | BC suffix; exact temperature grade requires confirmation |
| PCI Express Base Specification | r2.0 | r2.0 |
| Backward Compatibility | r1.1 and r1.0a | r1.1 and r1.0a |
| Auto-Negotiation | Supported | Supported |
| Lane Reversal | Supported | Supported |
Bảo phân biệt quan trọng
- Maintains the same fundamental PCIe switch configuration (vsPEX8613-BA50BCG)
- Offers an industrial-temperature ordering option (vsPEX8613-BA50BCG)
- Supports migration across three PCIe specification revisions (vsPEX8613-BA50BCG)
Ghi chú thiết kế
Use the manufacturer reference material for the exact ball map, lane assignments, reference-clock connections, and exposed or no-connect positions. Keep high-speed differential routes short, continuous through matched layers, and away from unrelated switching or high-current paths. Confirm connector and package escape geometry before fixing the PCB footprint because a 324-PBGA design leaves limited room for layer-transition corrections.
Partition the core and I/O supplies as specified by the manufacturer and place required bulk and high-frequency decoupling capacitors at the associated package balls. Confirm capacitor voltage rating, dielectric behavior, and DC-bias derating. Power-up and power-down sequencing must comply with the manufacturer requirements, especially when downstream devices depend on deterministic reset and supply ordering.
Assess the switch under worst-case PCIe traffic, maximum configured lanes, and the highest expected ambient temperature. Preserve the package's specified thermal-via pattern and provide copper area where the mechanical drawing permits it. Account for adjacent regulator and memory heat in compact industrial assemblies, and use the manufacturer's thermal model to determine whether additional airflow or heat spreading is necessary.
Do not infer the complete pinout, electrical limits, or temperature range from a distributor category label. Validate lane reversal and polarity reversal behavior in the intended system configuration, and test mixed-width or reduced-speed endpoints to confirm auto-negotiation. Also verify legacy operating-system and driver expectations because older PCIe specifications describe a different system environment than current platforms.
Thông tin tuân thủ
The ordering-code listing identifies PEX8613-BA50BI-G as green lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status are not established by the available product text.