Diodes Incorporated

PI7C9X112SLFDEX - PCI-to-PCI Bridge | Diodes Incorporated

Référence : PI7C9X112SLFDEX ✓ Actif
1.1 V Vdss 128-LQFP (14 mm x 14 mm) Package
MOQ : 1 |

PI7C9X112SLFDEX Présentation

Diodes Incorporated PI7C9X112SLFDEX is a PCI-to-PCI bridge interface integrated circuit packaged in a 128-pin LQFP measuring 14 mm by 14 mm. It is identified as a PCI Express bridge and is supplied in a tape-and-reel configuration with a standard reel quantity of 1,000 units. The device is intended for systems that must connect conventional PCI bus equipment to a PCI Express host or another modern PCI Express interface.

A PCI-to-PCI bridge is a protocol and transaction-layer interface controller that allows legacy PCI devices to operate within a PCI Express system. Within the broader semiconductor hierarchy, this component is a bus controller, interface IC, and PCI Express bridge. Its primary purpose is to translate the signaling and transaction behavior required by a PCI Express link and a conventional PCI bus so that existing PCI cards can communicate with a PCIe-capable host system.

The PI7C9X112SLFDEX uses the PI7C9X112SL device family designation and is available from Diodes Incorporated under an extended-order-code configuration. Distributor records identify the target as a specialized PCI interface IC with a maximum listed supply voltage of 1.1 V, gull-wing terminal geometry, a square HLFQFP package, and 128 terminals. The family datasheet also covers the PI7C9X112SL PCI Express Bridge and provides the primary technical reference for system integration.

The 128-terminal LQFP package provides a large pin count suitable for the parallel PCI bus, power distribution, clocking, control, configuration, and PCIe interface functions. Because its electrical characteristics are not reproduced in the retrieved distributor summaries, engineers should use the PI7C9X112SL datasheet pin-description table, reference design, and recommended-decoupling guidance when assigning PCB nets and validating signal timing.

Typical uses include industrial computers, embedded industrial controllers, test equipment, communication appliances, and legacy PCI expansion systems that need a PCIe-to-PCI bridge. The bridge is particularly useful when an established PCI card or peripheral must be retained while the host platform transitions to PCI Express.

PCB implementation requires careful routing of the conventional PCI signals and correct power, reference-clock, configuration, and reset connections. Keep high-speed PCIe traces short and continuous, observe the manufacturer’s reference-plane and decoupling arrangements, and verify all connector-facing signals against the applicable PCI and PCI Express system-design constraints.

This product page consolidates package, ordering, interface, and procurement information with practical PCB-planning guidance and a controlled replacement assessment. It also distinguishes a verified same-package ordering alternative from unverified functional equivalents, helping engineers identify where a direct drop-in substitution can be considered and where a complete interface review is mandatory.

Alternatives de remplacement direct pour PI7C9X112SLFDEX — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

PI7C9X112SLFDE

✅ Remplacement direct
📦 128-LQFP (14 mm x 14 mm)
The final ordering-code suffix differs, while both parts are listed as 128-LQFP PCI-to-PCI bridge devices; the electrical effect of the suffix difference is .

📋 Alternative de référence (hors catalogue)

PI7C9X112SLFDEX Valeurs maximales et caractéristiques électriques

Device Type PCI-to-PCI bridge interface
Interface Classification PCI Express bridge
Bus Category PCI / PCIe interface
Boîtier 128-LQFP (14 mm x 14 mm)
Package Code HLFQFP
Package Shape Square
Terminal Geometry Gull wing
Number of Terminals 128 terminals
Maximum Supply Voltage 1.1 V
Type de montage Surface mount
Shipping Package Tape and reel
Reel Quantity 1,000 units
Ordering Code X suffix configuration
Product Family PI7C9X112SL

Guide de configuration des broches du PI7C9X112SLFDEX tape and reel

Configuration des broches du PI7C9X112SLFDEX (boîtier tape and reel). Ce composant de puissance comporte des bornes de grille, de drain et de source. Pour les boîtiers non polarisés, consultez la fiche technique du fabricant pour l'orientation exacte de la broche 1 et les détails de l'empreinte. Les applications courantes incluent la conception d'alimentations, la commande de moteurs et la commutation de charges.

Schéma de brochage du boîtier tape and reel pour le PI7C9X112SLFDEX

Aucune donnée de brochage détaillée disponible pour PI7C9X112SLFDEX.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

PI7C9X112SLFDEX convient pour 6 applications: Industrial Computer PCI Expansion, Embedded PCIe-to-PCI Controller, PCI Express Test Equipment, Telecommunications Equipment, Legacy PCI Migration Platform, PCI Security and Imaging Appliance.

🏭

Industrial Computer PCI Expansion

The PI7C9X112SLFDEX fits an industrial computer that retains conventional PCI expansion hardware while using a PCI Express host interface. The device’s listed PCI-to-PCI bridge function provides the protocol-conversion path needed by the legacy bus, while its 128-LQFP package provides the pin count required for parallel PCI signals, power, control, and clock functions. The implementation should follow the PI7C9X112SL reference design, including its clocking, reset, decoupling, and PCB-routing requirements.

🔧

Embedded PCIe-to-PCI Controller

The PI7C9X112SLFDEX is applicable in embedded controllers that need to support a conventional PCI peripheral from a PCIe-based host processor. Its documented PCI Express Bridge function allows the system architect to reuse established PCI hardware instead of redesigning the expansion card. Integration remains dependent on exact lane configuration, bus width, timing, and operating limits, so engineers should verify the PI7C9X112SL datasheet and reference schematic before committing the board layout.

📺

PCI Express Test Equipment

The PI7C9X112SLFDEX can support test equipment that must exercise conventional PCI cards through a modern PCIe-based measurement or computing platform. The 128-terminal package supports the numerous connections associated with a parallel PCI interface and its associated control functions. Because bridge behavior, clock tolerances, transaction timing, and power requirements determine test coverage, the laboratory design should use the manufacturer application guidance and explicitly verify every bus-width and speed mode used by the equipment.

🌐

Telecommunications Equipment

The PI7C9X112SLFDEX is suited to communications equipment that retains PCI-based accelerator, interface, or monitoring modules while adopting a PCI Express system architecture. The bridge function provides a defined route between the two interface generations, reducing the need to replace every legacy module immediately. Board-level adoption nevertheless requires validation of signal integrity, reference-clock distribution, reset behavior, isolation requirements, thermal performance, and the complete electrical limits published in the PI7C9X112SL documentation.

🖥️

Legacy PCI Migration Platform

The PI7C9X112SLFDEX supports migration platforms intended to extend the useful life of conventional PCI equipment. A PCIe-capable controller can use the bridge rather than requiring immediate replacement of every installed PCI card, which is useful for capital-intensive industrial and laboratory systems. A successful migration still requires a detailed compatibility review covering supported bus width, operating modes, voltage domains, clocking, interrupt behavior, configuration space, and the mechanical dimensions of the 14 mm by 14 mm LQFP land pattern.

🎥

PCI Security and Imaging Appliance

The PI7C9X112SLFDEX can bridge established PCI imaging, capture, or security modules into a PCIe-based appliance. This arrangement is useful when specialized acquisition hardware has a long service life and still uses the conventional PCI interface. The bridge should be placed according to the manufacturer reference layout, with careful treatment of high-speed PCIe routing, conventional PCI signal timing, reference-clock jitter, power sequencing, and isolation. Functional testing must cover the exact transaction types and transfer modes expected from the installed peripheral.

Récapitulatif des produits recommandés

PI7C9X112SLFDE Same-package ordering alternative Utilisé dans : Industrial Computer PCI Expansion, Embedded PCIe-to-PCI Controller, PCI Express Test Equipment, Telecommunications Equipment, Legacy PCI Migration Platform, PCI Security and Imaging Appliance PI7C9X112SLFDEX Diodes Incorporated Utilisé dans : Industrial Computer PCI Expansion, Embedded PCIe-to-PCI Controller, PCI Express Test Equipment, Telecommunications Equipment, Legacy PCI Migration Platform, PCI Security and Imaging Appliance
What is the PI7C9X112SLFDEX?
The PI7C9X112SLFDEX is a Diodes Incorporated PCI-to-PCI bridge interface integrated circuit designed to connect conventional PCI bus devices with a PCI Express system. It is a 128-terminal LQFP device in a 14 mm by 14 mm package. The manufacturer datasheet describes the PI7C9X112SL family as a PCI Express Bridge and provides the detailed information required for system design.
What package does the PI7C9X112SLFDEX use?
The PI7C9X112SLFDEX uses a 128-LQFP package measuring 14 mm by 14 mm. Distributor records identify the package code as HLFQFP, the package shape as square, and the terminal geometry as gull wing. The exact exposed-pad arrangement, land pattern, and pin functions should be taken from the PI7C9X112SL datasheet and its package drawing before PCB release.
Where can I download the PI7C9X112SLFDEX datasheet PDF?
The PI7C9X112SLFDEX datasheet PDF is available through the Diodes Incorporated product document link on this page. The document is titled for the PI7C9X112SL PCI Express Bridge and covers the functions and technical information used to design hardware with the bridge. Use the ordering-code information to confirm that PI7C9X112SLFDEX corresponds to the intended package and temperature configuration.
Where can I find the PI7C9X112SLFDEX pinout?
The PI7C9X112SLFDEX pinout is located in the pin-description table of the PI7C9X112SL manufacturer datasheet. The package has 128 terminals, so a complete assignment should be transcribed directly from that table rather than inferred from the distributor title. Include every power, ground, configuration, reference-clock, PCI, and PCIe signal in the schematic and PCB netlist.
Where can I buy the PI7C9X112SLFDEX?
The PI7C9X112SLFDEX can be requested through the Request a Quote form on this page. The form is the appropriate route for checking exact suffix availability, reel quantity, current lead time, and order handling without relying on a stale catalog listing. Provide the complete MPN PI7C9X112SLFDEX when submitting the request so the quote matches the required package and ordering configuration.
What is the price of the PI7C9X112SLFDEX?
Current commercial terms for the PI7C9X112SLFDEX are returned through the Request a Quote form on this page. The quoted amount depends on quantity, reel packaging, availability, and component sourcing conditions, so a fixed figure should not be treated as a current commitment. Submit the exact MPN and intended order quantity for a traceable quotation.
What is the lead time for the PI7C9X112SLFDEX?
The current lead time for the PI7C9X112SLFDEX should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, suffix configuration, allocation status, and quality requirements. For production planning, request the earliest delivery date for the complete ordering code and state whether each reel must retain the manufacturer’s original dry-pack and labeling configuration.
Is the PI7C9X112SLFDEX in stock?
Current stock status for the PI7C9X112SLFDEX must be checked through the Request a Quote form on this page. Distributor search pages may reflect changing inventory rather than a guaranteed allocation, so a successful quotation is the appropriate confirmation for procurement. Specify the required quantity, reel format, and any date by which delivery must be completed.
What can replace the PI7C9X112SLFDEX?
PI7C9X112SLFDE is the closest verified same-package ordering alternative for PI7C9X112SLFDEX because both are listed as 128-LQFP PCI-to-PCI bridge devices. No cross-brand drop-in alternative is established by the available records. Before substituting, compare the manufacturer ordering tables, temperature grade, lead configuration, lifecycle status, PCI timing, and PCIe lane requirements.
What is the difference between PI7C9X112SLFDEX and PI7C9X112SLFDE?
PI7C9X112SLFDEX and PI7C9X112SLFDE are both identified as 128-LQFP PCI-to-PCI bridge interface devices, so their physical package family matches. The retrieved records do not establish the meaning or electrical effect of the final ordering-code difference. Consult the Diodes Incorporated ordering information and datasheet before approving either part as a substitute.
Is PI7C9X112SLFDEX suitable for a legacy PCI expansion card?
The PI7C9X112SLFDEX is suitable when the system requires a PCI Express-to-conventional-PCI bridge and the card complies with the bridge’s supported bus width, signaling, timing, and voltage requirements. A matching package alone does not establish compatibility. Validate the complete interface, reference clock, reset, configuration space, isolation, and platform-specific power requirements in the manufacturer reference design.
When should I choose the PI7C9X112SLFDEX over another PCIe bridge?
Choose the PI7C9X112SLFDEX when the target platform specifically requires a 128-LQFP PCI-to-PCI bridge and the system architecture matches its supported PCIe configuration, conventional PCI bus requirements, and reference-clock arrangement. Select another bridge only when the host interface, bus width, package, timing, power, or lifecycle requirements differ. A generic PCIe-to-PCI function is not automatically interchangeable.
Is PI7C9X112SLFDEX the same as PI7C9X2G404SLBFDEX?
The PI7C9X112SLFDEX and PI7C9X2G404SLBFDEX are not established as identical parts by the available information. PI7C9X112SLFDEX is explicitly listed as a 128-LQFP PCI-to-PCI bridge, while the comparison record does not prove that PI7C9X2G404SLBFDEX has the same package, pinout, electrical ratings, protocol support, or ordering meaning. Treat it as a functional comparison item, not a drop-in replacement.
What are the key specifications of PI7C9X112SLFDEX that engineers should know?
The PI7C9X112SLFDEX is a Diodes Incorporated PCI-to-PCI bridge interface IC in a 128-LQFP, 14 mm by 14 mm square package. Distributor records identify gull-wing terminals, an HLFQFP package code, tape-and-reel packaging, a 1,000-unit reel, and a maximum listed supply voltage of 1.1 V. Detailed lane, timing, temperature, and power information belongs in the manufacturer datasheet.
What PCB design considerations apply to the PI7C9X112SLFDEX?
The PI7C9X112SLFDEX requires careful implementation of both PCIe and conventional PCI connections. Follow the manufacturer’s reference design for layer stackup, reference clocks, power sequencing, decoupling, reset, and connector routing. Keep high-speed PCIe traces short and impedance controlled, provide adequate ground-plane continuity, and validate conventional PCI signal integrity and termination before production release.
Is the PI7C9X112SLFDEX RoHS compliant?
The RoHS status of the PI7C9X112SLFDEX must be confirmed from the current Diodes Incorporated product declaration or material-compliance documentation. The retrieved distributor summaries identify the bridge, package, and electrical attributes but do not explicitly state RoHS, REACH, halogen-free, or automotive qualification. Request current compliance documentation before using the claim in a bill of materials or environmental declaration.

Données de référence d'ingénierie pour PI7C9X112SLFDEX — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the PI7C9X112SLFDEX when the platform specifically requires the Diodes Incorporated PI7C9X112SL PCI Express Bridge in a 128-LQFP package and the required conventional PCI behavior matches the family documentation. Consider PI7C9X112SLFDE when the manufacturer ordering table confirms that its E suffix provides equivalent electrical and temperature requirements; its listed package matches, but the suffix meaning must be verified. Do not treat PI7C9X2G404SLBFDEX as a drop-in replacement because the available comparison information does not establish a common footprint or pinout. Before release, confirm PCIe lane configuration, conventional PCI bus width, reference-clock requirements, power limits, timing, reset behavior, lifecycle status, and the full 128-terminal pin assignment against the PI7C9X112SL datasheet.

Comparaison avec les alternatives

Paramètre Ce produit PI7C9X112SLFDE
Brand Diodes Incorporated Diodes Incorporated
Package 128-LQFP (14 mm x 14 mm) 128-LQFP (14 mm x 14 mm)
Device Type PCI-to-PCI bridge interface PCI-to-PCI bridge interface
Interface Classification PCI Express bridge PCI Express bridge
Number of Terminals 128 terminals 128 terminals
Ordering Suffix X suffix configuration E suffix configuration

Principaux différenciateurs

  • Matches the specialized 128-LQFP bridge platform (vs PI7C9X112SLFDE)
  • Uses the X ordering configuration (vs PI7C9X112SLFDE)
  • Directly identified as a PCI-to-PCI bridge (vs PI7C9X2G404SLBFDEX)

Notes de conception

Use the PI7C9X112SL datasheet pin table and package drawing as the authority for every one of the 128 terminal assignments. Treat the 14 mm by 14 mm LQFP footprint as a precision routing problem: verify pad dimensions, solder-mask clearance, paste stencil aperture, pin-one orientation, and assembly clearances before releasing artwork. Do not infer an unused terminal or exposed-pad connection from the generic HLFQFP package designation.

Implement the PCIe and conventional PCI interfaces using the layer stackup and routing topology shown by the manufacturer. Keep PCIe traces short, continuous, impedance controlled, and referenced to an uninterrupted ground plane. Place decoupling and clock-network components close to their associated pins. Validate trace geometry with the fabricator’s stackup because connector launches, vias, and return-path discontinuities can change interface behavior even when the schematic is correct.

Do not approve a substitution solely because both order codes are described as 128-LQFP PCI-to-PCI bridge devices. Verify the ordering table, electrical ratings, operating-temperature grade, lifecycle status, pin configuration, and supported interface modes for PI7C9X112SLFDE against PI7C9X112SLFDEX. A same-package result establishes mechanical similarity, not full functional or qualification equivalence.

Build the power network around the manufacturer’s recommended supply topology, component values, startup behavior, and decoupling locations. The available distributor record lists a maximum supply voltage of 1.1 V, but it does not identify every rail or tolerance. Confirm all nominal voltages, sequencing constraints, current limits, and load behavior in the datasheet, then verify the assembled board’s rail limits and startup sequence under worst-case system conditions.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The retrieved manufacturer and distributor summaries do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Current declarations should be obtained from Diodes Incorporated before use in environmental or qualification documentation.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

PI7C9X112SLFDEX datasheet PI7C9X112SLFDEX pinout PI7C9X112SLFDEX datasheet pdf PI7C9X112SLFDEX equivalent PI7C9X112SLFDEX replacement PI7C9X112SLFDEX cross reference PI7C9X112SLFDEX vs PI7C9X112SLFDE PI7C9X112SLFDEX footprint PI7C9X112SLFDEX price PI7C9X112SLFDEX stock Diodes PI7C9X112SLFDEX PI7C9X112SL 128 LQFP bridge PI7C9X112SLFDEX industrial PCI bridge What replaces PI7C9X112SLFDEX

Composants & termes associés

Diodes Incorporated PI7C9X112SLFDEX PI7C9X112SLFDE PI7C9X2G404SLBFDEX PI7C9X112SL PCI-to-PCI bridge PCI Express Bridge PCI bus controller interface IC semiconductor 128-LQFP HLFQFP 14 mm by 14 mm package gull-wing terminal tape and reel packaging maximum supply voltage PCIe high-speed routing conventional PCI bus reference clock industrial computer legacy PCI expansion PCI signal integrity surface mount semiconductor bus interface
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ