Diodes Incorporated

PI7C9X1172CZHEX - 33Mbps I2C/SPI to UART Bridge | Diodes

Référence : PI7C9X1172CZHEX ✓ Actif
32-pin TQFN, 5 mm x 5 mm Package
MOQ : 1 |

PI7C9X1172CZHEX Présentation

The Diodes Incorporated PI7C9X1172CZHEX is a dual-channel I2C/SPI-to-UART bridge controller supporting UART data rates up to 33 Mbps in a 32-pin TQFN package measuring 5 mm by 5 mm. It provides an I2C-bus/SPI controller interface, two high-performance UART channels, and up to eight programmable GPIO pins for compact serial-interface designs.

An I2C/SPI-to-UART bridge controller is a type of interface IC that translates between a host serial bus and independent UART channels. It sits between a microcontroller or processor and an embedded serial subsystem, allowing one host bus to connect to multiple UART peripherals while reducing the number of host I/O pins required. In the broader hierarchy, the device belongs to the interface-controller family within integrated circuits and embedded communication semiconductors.

Key features include a maximum UART data rate of 33 Mbps, support for I2C Standard-mode and Fast-mode operation, dual UART channels, and as many as eight additional programmable GPIO pins. The 32-pin TQFN package also supports compact board layouts in industrial controls, communications equipment, embedded systems, and test systems where several serial functions must share a limited connector or routing area.

The PI7C9X1172 family combines an I2C host interface, SPI support, UART framing, and programmable parallel I/O in one controller. The I2C interface uses the standard SDA and SCL lines, while the UART side provides two channels capable of high-speed serial transfer. Low operating and sleeping current are stated design goals, making power-conscious control of the serial subsystem possible when the system is not actively exchanging data.

Typical uses include industrial serial gateways, programmable logic and test equipment, embedded control boards, peripheral expansion, and compact communications modules. The dual-channel architecture is especially useful when an embedded controller must monitor or control two independent UART-linked subsystems through one I2C or SPI host connection.

Board design should keep I2C traces short, provide the pull-up network required by the selected bus speed, and route UART signals with return-path discipline. Because this version uses a 32-pin TQFN package, verify the exposed-pad connection, land pattern, and thermal strategy against the manufacturer pin-description and package drawings before layout release.

This page organizes the controller’s interface capabilities, package constraints, application guidance, comparison data, and sourcing options into a practical engineering reference that supports both initial component selection and PCB implementation.

Alternatives de remplacement direct pour PI7C9X1172CZHEX — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

PI7C9X1172CZHEX Valeurs maximales et caractéristiques électriques

Device Type Dual-channel I2C/SPI-to-UART bridge controller
Maximum UART Data Rate 33 Mbps
UART Channels 2 channels
Host Serial Interfaces I2C-bus and SPI
I2C Modes Supported Standard-mode and Fast-mode
I2C Bus Lines 2 lines: SDA and SCL
Programmable GPIO Count Up to 8 pins
Boîtier 32-pin TQFN, 5 mm x 5 mm
Family Package Options QFN-32 and TSSOP-28
Type de montage Surface mount
Statut RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Guide de configuration des broches du PI7C9X1172CZHEX qfn-32 and tssop-28

Configuration des broches du PI7C9X1172CZHEX (boîtier qfn-32 and tssop-28). Ce composant de puissance comporte des bornes de grille, de drain et de source. Pour les boîtiers non polarisés, consultez la fiche technique du fabricant pour l'orientation exacte de la broche 1 et les détails de l'empreinte. Les applications courantes incluent la conception d'alimentations, la commande de moteurs et la commutation de charges.

Schéma de brochage du boîtier qfn-32 and tssop-28 pour le PI7C9X1172CZHEX

Aucune donnée de brochage détaillée disponible pour PI7C9X1172CZHEX.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

PI7C9X1172CZHEX convient pour 6 applications: Industrial Serial Gateway, Embedded Peripheral Expansion, Programmable Test Equipment, Communications Module, Data Acquisition Controller, Multi-Function Control Board.

🏭

Industrial Serial Gateway

The PI7C9X1172CZHEX fits a compact industrial gateway that connects one host processor to two external serial subsystems. A host can manage both UART channels through I2C or SPI while the controller handles UART framing at rates up to 33 Mbps. This architecture reduces the number of host pins required for dual-channel communications and leaves up to eight GPIO pins available for modem-control, reset, interrupt, or status signals. The principal design consideration is ensuring that the gateway’s supply, temperature, grounding, and surge requirements remain within the device’s electrical limits.

🧩

Embedded Peripheral Expansion

PI7C9X1172CZHEX can expand a microcontroller with two UART channels without dedicating multiple direct serial pins to the host. The I2C-bus connection uses SDA and SCL, while SPI provides an alternative host interface for systems that already operate in SPI mode. With UART operation reaching 33 Mbps and as many as eight programmable GPIO pins, the device can consolidate several peripheral-control functions into one interface IC. Firmware must correctly initialize the bridge, configure each UART, map interrupts or GPIO events, and maintain deterministic command and response handling.

🔧

Programmable Test Equipment

The PI7C9X1172CZHEX is useful in automated test equipment that must connect a controller to two independent serial instruments. I2C or SPI provides a compact connection to the test controller, while dual UART channels handle higher-speed instrument traffic and protocol-specific exchanges. The available GPIO pins can support triggers, interlocks, resets, or status indicators. Because test systems often mix RS-232, RS-422, and TTL signaling, engineers should determine whether the UART-side levels can be used directly or whether external line drivers and protection are required.

🌐

Communications Module

PI7C9X1172CZHEX can organize a compact communications module around one host-side I2C or SPI link and two high-performance UART outputs. The 33 Mbps maximum UART rate supports demanding data paths, while programmable GPIO signals can provide modem-control or equipment-state functions. The 5 mm by 5 mm TQFN-32 package saves board area compared with larger multi-channel interface solutions. Layout should preserve controlled return paths for the high-speed UART signals, provide suitable I2C pull-ups, and keep the exposed-pad connection compliant with the manufacturer package instructions.

📟

Data Acquisition Controller

The PI7C9X1172CZHEX can bridge a data-acquisition controller to two serial instruments or sensor subsystems through its I2C-bus or SPI host side. Dual UART channels permit concurrent command traffic and measurement data transfer, while the GPIO outputs can trigger acquisition equipment or monitor ready signals. Its support for Standard-mode and Fast-mode I2C operation makes it adaptable to embedded control architectures. System designers should calculate bus loading, avoid long unprotected I2C branches, and verify UART baud-rate tolerance across temperature and clock tolerances.

⚡

Multi-Function Control Board

PI7C9X1172CZHEX suits a control board that needs several serial functions but has limited processor I/O. Two UART channels can connect motor controllers, display peripherals, or service interfaces, while I2C or SPI maintains communication with the main processor and up to eight GPIO pins handle discrete control tasks. This consolidation can simplify firmware and reduce routing congestion in a 5 mm by 5 mm footprint. Designers should reserve the correct QFN-32 land pattern, validate all voltage-domain connections, and include appropriate pull-up, decoupling, and protection components.

What is the PI7C9X1172CZHEX?
The PI7C9X1172CZHEX is a dual-channel I2C/SPI-to-UART bridge controller from Diodes Incorporated. According to the manufacturer datasheet, it translates host-side I2C-bus or SPI traffic into two high-performance UART channels and also provides up to eight programmable GPIO pins. It is packaged in a 32-pin TQFN measuring 5 mm by 5 mm.
What is the maximum UART data rate of PI7C9X1172CZHEX?
The PI7C9X1172CZHEX supports UART data rates up to 33 Mbps. According to the manufacturer datasheet, this makes the controller suitable for communication subsystems requiring substantially more throughput than a conventional low-speed asynchronous serial port. Designers should also confirm the electrical signaling limits and timing margins of the connected UART device before selecting board-level baud rates.
How many UART and GPIO channels does PI7C9X1172CZHEX provide?
The PI7C9X1172CZHEX provides two independent high-performance UART channels and up to eight additional programmable general-purpose I/O pins. The manufacturer datasheet describes the device as a dual-channel bridge, allowing one I2C-bus or SPI host connection to manage multiple serial functions while offloading communication from the host processor.
Which I2C modes are supported by PI7C9X1172CZHEX?
The PI7C9X1172CZHEX supports Standard-mode and Fast-mode I2C-bus operation. According to the manufacturer datasheet, the I2C interface uses the conventional SDA and SCL lines. The appropriate pull-up resistance depends on bus capacitance, voltage, and operating frequency, so use the device timing information and the bus capacitance when selecting those network values.
What package does PI7C9X1172CZHEX use?
The PI7C9X1172CZHEX uses a 32-pin TQFN package measuring 5 mm by 5 mm. The Mouser product listing identifies the package as W-QFN5050-32, while the DigiKey listing identifies it as a 32-TQFN. The PI7C9X1172 family is also described in the manufacturer documentation as supporting QFN-32 and TSSOP-28 package options.
Where can I buy PI7C9X1172CZHEX online?
The PI7C9X1172CZHEX can be requested through the Request a Quote form on this page. The form accepts the exact Diodes Incorporated part number and package designation, allowing the sourcing team to confirm current stock, manufacturer lead time, reel quantity, and traceability requirements before an order is placed.
What is the price of PI7C9X1172CZHEX?
Use the Request a Quote form on this page for the current PI7C9X1172CZHEX price and quantity breaks. Commercial terms can vary with reel quantity, required date code, manufacturer traceability, and delivery schedule, so the final quotation should specify the exact 32-pin TQFN ordering code and all applicable production requirements.
What is the lead time for PI7C9X1172CZHEX?
The current manufacturer lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, approved date-code policy, and target delivery date in the request. The part is listed as an in-stock catalog item, but production scheduling and traceability requirements should still be confirmed for the specific order.
Is PI7C9X1172CZHEX in stock?
The PI7C9X1172CZHEX is listed as in stock by a current authorized supply listing, and the Mouser result identifies a 2,500-piece tape-and-reel configuration. For a binding availability statement, use the Request a Quote form on this page and specify the required reel quantity, date code, and delivery schedule.
PI7C9X1172CZHEX vs MAX3221IPWR - which is better for a dual-UART design?
The PI7C9X1172CZHEX is preferable when the host communicates through I2C or SPI and needs two UART channels plus programmable GPIO. The MAX3221IPWR is a dedicated two-channel RS-232 transceiver rather than an I2C/SPI protocol bridge. They are not drop-in substitutes because their functions, packages, logic interfaces, and electrical signaling requirements differ.
When should I choose PI7C9X1172CZHEX over MAX3221IPWR?
Choose PI7C9X1172CZHEX when the system architecture needs an embedded processor to access two UART peripherals through an I2C-bus or SPI host interface. Choose the MAX3221IPWR when the host already provides direct UART pins and only RS-232 level conversion is required. The bridge controller reduces host pin usage but adds protocol configuration and software-handling requirements.
Is PI7C9X1172CZHEX suitable for an industrial serial gateway?
The PI7C9X1172CZHEX is suitable for a compact industrial serial gateway that needs two high-speed UART channels and a single I2C or SPI host connection. Its stated UART capability reaches 33 Mbps, and the QFN-32 package supports dense layouts. Final suitability depends on the gateway's supply range, temperature range, surge exposure, and isolation requirements.
What can replace PI7C9X1172CZHEX as a drop-in part?
No independently confirmed drop-in replacement was identified for the PI7C9X1172CZHEX. A valid replacement must match the 32-pin TQFN footprint, provide two UART channels, retain I2C and SPI support, and preserve compatible GPIO, supply, timing, and electrical characteristics. Use the Request a Quote form on this page if you require sourcing assistance for a specific production quantity.
Where can I download the PI7C9X1172CZHEX datasheet PDF?
The PI7C9X1172CZHEX datasheet PDF is linked from the Datasheet URL on this page, and an additional catalog copy is available from the Mouser specifications library. The manufacturer document is the authoritative source for the complete pin-description table, electrical characteristics, timing diagrams, package drawings, and recommended application circuits.
Where can I find the PI7C9X1172CZHEX pinout?
Use the pin-description table and package drawing in the PI7C9X1172CZHEX manufacturer datasheet to assign every QFN-32 connection. The device uses a 32-pin TQFN footprint, so the land pattern and exposed-pad treatment must also be checked against the package drawing. The pinout is not reproduced here to avoid assigning functions without the complete official pin table.

Données de référence d'ingénierie pour PI7C9X1172CZHEX — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose PI7C9X1172CZHEX when a system must connect one I2C or SPI host to two UART peripherals and can benefit from additional programmable GPIO. Its maximum UART rate of 33 Mbps, dual-channel architecture, and 5 mm by 5 mm QFN-32 package suit compact embedded and industrial control designs. Choose a dedicated RS-232 transceiver such as the MAX3221IPWR when the host already has direct UART pins and only physical-level conversion is required. Choose an RS-232 transceiver such as the SP3232EHEY-L when legacy equipment requires RS-232 electrical signaling rather than host-side protocol bridging. No drop-in replacement was confirmed, so any substitution must be validated against the QFN-32 land pattern, dual-UART architecture, GPIO count, clocking, timing, supply voltage, and I2C/SPI behavior before production approval.

Comparaison avec les alternatives

Paramètre Ce produit
Device Type Dual-channel I2C/SPI-to-UART bridge controller
Package 32-pin TQFN, 5 mm x 5 mm
Brand Diodes Incorporated
Maximum UART Data Rate 33 Mbps
UART Channels 2 channels
Host Interface I2C-bus and SPI
Programmable GPIO Up to 8 pins
I2C Support Standard-mode and Fast-mode
Family Package Options QFN-32 and TSSOP-28
Mounting Type Surface mount

Principaux différenciateurs

  • Consolidates a host serial bus, dual UART channels, and programmable GPIO (vs MAX3221IPWR)
  • Higher stated UART throughput (vs SP3232EHEY-L)
  • Space-efficient QFN implementation (vs MAX3221IPWR)

Notes de conception

Route the I2C SDA and SCL lines as a compact, matched pair and place their pull-up resistors close to the bus master or designated end point. The device supports Standard-mode and Fast-mode operation, but the usable frequency still depends on bus capacitance, pull-up strength, clock stretching, and the electrical characteristics of every connected device. Avoid adding unnecessary stubs to the serial bus.

Use the manufacturer QFN-32 land pattern and package drawing before releasing the PCB. Confirm whether the exposed pad is electrically designated as ground or otherwise connected, follow the stated thermal-pad soldering guidance, and place the required interface components near their associated pins. Incorrect exposed-pad treatment can affect assembly, heat transfer, and system reliability.

Treat UART connections as high-speed communication links even though they are asynchronous. Route signals over a continuous reference plane, minimize stub lengths and vias, and maintain a nearby return path. Validate timing and voltage levels with the connected UART transceiver, especially when operating near the stated 33 Mbps maximum rate or when long cables are present.

Do not assume that an I2C/SPI-to-UART bridge can replace a dedicated RS-232 transceiver. The bridge manages serial protocol conversion through the host, while a transceiver performs physical-level conversion. Confirm that each UART endpoint uses compatible voltage levels, and add a suitable line driver or receiver when the required electrical interface is RS-232, RS-422, or another physical standard.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code. Review the current manufacturer product documentation before using the device in regulated or automotive equipment.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

PI7C9X1172CZHEX datasheet PI7C9X1172CZHEX pinout PI7C9X1172CZHEX datasheet pdf PI7C9X1172CZHEX equivalent PI7C9X1172CZHEX replacement PI7C9X1172CZHEX QFN-32 footprint PI7C9X1172CZHEX price PI7C9X1172CZHEX stock Diodes Incorporated PI7C9X1172CZHEX PI7C9X1172CZHEX vs MAX3221IPWR PI7C9X1172 33Mbps UART bridge PI7C9X1172 dual UART application circuit

Composants & termes associés

Diodes Incorporated PI7C9X1172CZHEX PI7C9X1172 MAX3221IPWR SP3232EHEY-L I2C-bus SPI UART RS-232 interface controller bridge controller integrated circuit semiconductor programmable GPIO TQFN-32 QFN family surface mount SMD Standard-mode I2C Fast-mode I2C SDA SCL 33 Mbps industrial serial gateway embedded peripheral expansion
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ