PI7C9X442SLBFDE PCIe-to-USB 2.0 Switch | Diodes Incorporated
Référence : PI7C9X442SLBFDE ✓ ActifPI7C9X442SLBFDE Présentation
A Swidge is a multifunctional interface device that consolidates packet-switching and USB bridging functions in one semiconductor. Within the interface IC hierarchy, the PI7C9X442SLBFDE sits between a computer's PCI Express host bus and downstream peripherals. The integrated architecture can simplify board partitioning while providing more expansion options than a conventional single-port PCIe-to-USB controller.
The primary feature of this device is its combination of two PCIe x1 downstream ports with four USB 2.0 ports. Its packet-switch function provides ordered connectivity from the upstream PCIe x1 link, while the bridge function provides USB 2.0 host access. This arrangement is useful in embedded systems, notebook computers, industrial controllers, and other platforms that need to expose several PCIe and USB connections through one host interface.
The PI7C9X442SLBFDE uses a high-performance interconnect architecture designed for simultaneous downstream access. Because the upstream interface is PCIe x1, total downstream bandwidth is shared by the active links. System designers should therefore account for the aggregate traffic generated by USB traffic and both PCIe x1 downstream paths when validating application performance.
Typical uses include compact embedded platforms, notebook computer expansion, multifunction peripheral systems, and USB 2.0 legacy equipment connected to a PCIe host. The 128-LQFP 14 x 14 mm package provides a high pin count for separate power, ground, PCIe, USB, configuration, and auxiliary signals. Exact electrical ratings, clocking requirements, transceiver characteristics, and supported platform features should be confirmed from the manufacturer datasheet before schematic capture.
Layout should preserve the differential routing required by the high-speed PCIe and USB interfaces, with impedance-controlled signal paths and continuous return-plane references. Place input and output decoupling capacitors close to their associated supply pins, and follow the datasheet reference layout for the 128-LQFP footprint and exposed-pad or thermal requirements. The use of a 14 x 14 mm LQFP also requires adequate assembly clearance around the perimeter leads.
This product overview connects the PI7C9X442SLBFDE's port topology and package requirements with practical selection and layout considerations. It also distinguishes the device from a basic one-port PCIe-to-USB bridge by highlighting the integrated packet-switch function, two PCIe x1 downstream ports, and four USB 2.0 ports.
Alternatives de remplacement direct pour PI7C9X442SLBFDE — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesPI7C9X442SLBFDE Valeurs maximales et caractéristiques électriques
| Product Type | PCI Express-to-USB 2.0 Swidge |
| Primary Function | PCIe packet switch and PCIe-to-USB 2.0 bridge |
| Upstream PCIe Port | 1 x PCIe x1 |
| Downstream PCIe Ports | 2 x PCIe x1 |
| USB 2.0 Ports | 4 ports |
| Simultaneous Downstream Access | Supported |
| Boîtier | 128-LQFP (14 x 14 mm) |
| Nombre de broches | 128 pins |
Guide de configuration des broches du PI7C9X442SLBFDE 128-lqfp (14 x 14 mm)
Configuration des broches du PI7C9X442SLBFDE (boîtier 128-lqfp (14 x 14 mm)). Ce composant de puissance comporte des bornes de grille, de drain et de source. Pour les boîtiers non polarisés, consultez la fiche technique du fabricant pour l'orientation exacte de la broche 1 et les détails de l'empreinte. Les applications courantes incluent la conception d'alimentations, la commande de moteurs et la commutation de charges.
Aucune donnée de brochage détaillée disponible pour PI7C9X442SLBFDE.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PI7C9X442SLBFDE convient pour 6 applications: Notebook Computer Interface Expansion, PCIe-to-USB 2.0 Legacy Peripheral Bridge, Embedded Industrial Controller, Multifunction Peripheral System, PCIe Storage and Configuration Hub, Test and Measurement Data Interface.
Notebook Computer Interface Expansion
The PI7C9X442SLBFDE fits a notebook expansion design that needs more connectivity than a conventional one-port PCIe-to-USB bridge. The manufacturer describes the device as fanning out one PCIe x1 upstream port to two PCIe x1 downstream ports and four USB 2.0 ports, allowing one host link to support several device paths. This topology can simplify platform partitioning in compact computers, embedded notebooks, and portable industrial systems. The principal performance consideration is the shared PCIe x1 upstream bandwidth: traffic from both PCIe links and four USB ports ultimately uses that upstream path. Layout and power validation should follow the manufacturer datasheet, particularly for controlled-impedance routing and supply decoupling around the 128-LQFP package.
Recommandé
PCIe-to-USB 2.0 Legacy Peripheral Bridge
The PI7C9X442SLBFDE is appropriate when a PCIe host must connect to USB 2.0-era peripherals that lack a native PCIe interface. Its integrated PCIe-to-USB 2.0 bridge provides four USB 2.0 downstream ports, while the packet-switch function adds two PCIe x1 downstream paths for additional expansion. This mixed connectivity is useful in industrial controllers, test systems, and legacy equipment upgrades where both interface types are required. Compared with a discrete packet switch plus USB bridge implementation, the consolidated device can reduce board partitioning. Designers must still account for connector protection, USB device power requirements, host software support, and the aggregate bandwidth limitation of the single PCIe x1 upstream connection.
Recommandé
Embedded Industrial Controller
The PI7C9X442SLBFDE can serve an embedded industrial controller that combines PCIe expansion with USB 2.0 peripherals on one board. One upstream PCIe x1 connection provides access to two downstream PCIe x1 ports and four USB 2.0 ports, which supports storage, configuration, data-acquisition, or service peripherals within a single system architecture. Its multifunction design may simplify routing compared with separate switching and bridge devices. Industrial implementations should verify operating-temperature limits, supply tolerances, clock requirements, and available device drivers using the manufacturer datasheet. Because the upstream link is x1, it is also necessary to estimate simultaneous traffic and avoid designing a workload that assumes independent full bandwidth on every downstream port.
Recommandé
Multifunction Peripheral System
The PI7C9X442SLBFDE suits a multifunction peripheral system that needs both PCIe and USB 2.0 connectivity. The two PCIe x1 downstream ports can support compatible high-speed add-in functions, while four USB 2.0 ports accommodate keyboards, storage, service interfaces, and other peripherals. The device allows simultaneous access to multiple downstream resources according to Diodes Incorporated, making it more capable than a dedicated one-port USB bridge. Firmware must support the packet-switch and USB-bridge functions expected by the host platform. Signal-integrity review should include the complete routing between the upstream connector, internal devices, and external USB connectors, with connector placement and ESD-protection strategy treated as separate design tasks.
Recommandé
PCIe Storage and Configuration Hub
The PI7C9X442SLBFDE can act as a connectivity hub for PCIe storage, configuration devices, and USB 2.0 service ports in a compact embedded platform. The packet-switch function provides two downstream PCIe x1 routes, while the bridge function exposes four USB 2.0 connections for maintenance, boot support, or peripheral data transfer. This architecture reduces the number of separate host-facing interface blocks on the logic board. Engineers should partition traffic so high-priority PCIe operations are not unexpectedly constrained by concurrent USB activity through the shared upstream x1 link. Thermal validation should include actual controller loading, connector dissipation, and ambient conditions at the board level rather than relying only on the junction-temperature limit in the device documentation.
Recommandé
Test and Measurement Data Interface
The PI7C9X442SLBFDE can support a test and measurement platform that needs a PCIe host link, multiple internal PCIe devices, and USB 2.0 service peripherals. Two downstream PCIe x1 ports can connect compatible measurement or storage modules, while four USB 2.0 ports provide access to instruments, configuration media, and service equipment. The integrated Swidge architecture simplifies the logical interconnect compared with separate PCIe switching and USB bridging. For deterministic operation, engineers should characterize the traffic generated by each peripheral and confirm that the application does not expect concurrent full-rate traffic on every downstream interface. The board design must follow the manufacturer layout guidance and provide appropriate isolation between high-speed digital routes and external connector transients.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PI7C9X442SLBFDE — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Diodes Incorporated |
| Package | 128-LQFP (14 x 14 mm) |
| Product Function | PCIe-to-USB 2.0 Swidge |
| Upstream PCIe Ports | 1 x PCIe x1 |
| Downstream PCIe Ports | 2 x PCIe x1 |
| USB 2.0 Ports | 4 ports |
| Simultaneous Downstream Access | Supported |
| Pin Count | 128 pins |
Principaux différenciateurs
- Integrated packet-switch and USB-bridge functionality (vs Single-port PCIe-to-USB bridge)
- Concurrent PCIe and USB expansion (vs Discrete PCIe switch plus USB bridge implementation)
- Simultaneous downstream-resource access (vs Basic point-to-point PCIe-to-USB bridge)
Notes de conception
Route the PCIe and USB interfaces as controlled-impedance differential signals with continuous reference planes and no unnecessary stubs. Follow the manufacturer reference layout for the PI7C9X442SL in its 128-LQFP 14 x 14 mm package. Because the package exposes 128 connections, verify every pin assignment against the datasheet and confirm that the PCB land pattern matches the exact ordering code before releasing artwork.
Place decoupling capacitors close to the appropriate supply pins and keep the high-frequency return path continuous beneath the device. Separate noisy USB or PCIe connector return currents from sensitive internal reference paths where the board stack-up permits. Validate the complete supply network under simultaneous downstream activity rather than estimating current from only one connected peripheral.
Do not treat the two downstream PCIe x1 links and four USB 2.0 ports as independent full-bandwidth channels. All traffic shares the single PCIe x1 upstream link, so workload testing should include realistic concurrent transfers. Also avoid assuming that a device in the same LQFP family is a drop-in replacement; verify the exact pinout, clocking, firmware, and functional requirements.
Informations de conformité
The product pages identify Diodes Incorporated as the manufacturer, but the available product information does not explicitly state the requested compliance classifications. Confirm each status in the current manufacturer documentation before production release.