Diodes Incorporated

PI7C9X442SLBFDE PCIe-to-USB 2.0 Switch | Diodes Incorporated

MPN: PI7C9X442SLBFDE ✓ פעיל
128-LQFP (14 x 14 mm) Package
כמות הזמנה מינימלית: 1 |

PI7C9X442SLBFDE סקירה

The Diodes Incorporated PI7C9X442SLBFDE is a PCI Express-to-USB 2.0 Swidge interface IC that combines a PCIe packet switch with a PCIe-to-USB 2.0 bridge. It fans out one PCIe x1 upstream port to two PCIe x1 downstream ports and four USB 2.0 ports, and the device is supplied in a 128-LQFP 14 x 14 mm package. It supports simultaneous access to multiple downstream resources through a single host interface.

A Swidge is a multifunctional interface device that consolidates packet-switching and USB bridging functions in one semiconductor. Within the interface IC hierarchy, the PI7C9X442SLBFDE sits between a computer's PCI Express host bus and downstream peripherals. The integrated architecture can simplify board partitioning while providing more expansion options than a conventional single-port PCIe-to-USB controller.

The primary feature of this device is its combination of two PCIe x1 downstream ports with four USB 2.0 ports. Its packet-switch function provides ordered connectivity from the upstream PCIe x1 link, while the bridge function provides USB 2.0 host access. This arrangement is useful in embedded systems, notebook computers, industrial controllers, and other platforms that need to expose several PCIe and USB connections through one host interface.

The PI7C9X442SLBFDE uses a high-performance interconnect architecture designed for simultaneous downstream access. Because the upstream interface is PCIe x1, total downstream bandwidth is shared by the active links. System designers should therefore account for the aggregate traffic generated by USB traffic and both PCIe x1 downstream paths when validating application performance.

Typical uses include compact embedded platforms, notebook computer expansion, multifunction peripheral systems, and USB 2.0 legacy equipment connected to a PCIe host. The 128-LQFP 14 x 14 mm package provides a high pin count for separate power, ground, PCIe, USB, configuration, and auxiliary signals. Exact electrical ratings, clocking requirements, transceiver characteristics, and supported platform features should be confirmed from the manufacturer datasheet before schematic capture.

Layout should preserve the differential routing required by the high-speed PCIe and USB interfaces, with impedance-controlled signal paths and continuous return-plane references. Place input and output decoupling capacitors close to their associated supply pins, and follow the datasheet reference layout for the 128-LQFP footprint and exposed-pad or thermal requirements. The use of a 14 x 14 mm LQFP also requires adequate assembly clearance around the perimeter leads.

This product overview connects the PI7C9X442SLBFDE's port topology and package requirements with practical selection and layout considerations. It also distinguishes the device from a basic one-port PCIe-to-USB bridge by highlighting the integrated packet-switch function, two PCIe x1 downstream ports, and four USB 2.0 ports.

חלופות תחליף ישיר עבור PI7C9X442SLBFDE — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

PI7C9X442SLBFDE דירוגים מרביים ומאפיינים חשמליים

Product Type PCI Express-to-USB 2.0 Swidge
Primary Function PCIe packet switch and PCIe-to-USB 2.0 bridge
Upstream PCIe Port 1 x PCIe x1
Downstream PCIe Ports 2 x PCIe x1
USB 2.0 Ports 4 ports
Simultaneous Downstream Access Supported
מארז 128-LQFP (14 x 14 mm)
מספר פינים 128 pins

מדריך תצורת פינים של PI7C9X442SLBFDE 128-lqfp (14 x 14 mm)

תצורת פינים עבור PI7C9X442SLBFDE (מארזת 128-lqfp (14 x 14 mm)). רכיב הספק זה כולל מסופי שער, ניקוז ומקור. במארזים לא מקוטבים, יש לעיין בגיליון הנתונים של היצרן לכיוון מדויק של פין 1 ולפרטי טביעת רגל. יישומים נפוצים כוללים תכנון ספקי כוח, הנעת מנועים והחלפת עומסים.

תרשים פינים של מארזת 128-lqfp (14 x 14 mm) עבור PI7C9X442SLBFDE

אין נתוני פריסת פינים מפורטים עבור PI7C9X442SLBFDE.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PI7C9X442SLBFDE מתאים עבור 6 יישוםs: Notebook Computer Interface Expansion, PCIe-to-USB 2.0 Legacy Peripheral Bridge, Embedded Industrial Controller, Multifunction Peripheral System, PCIe Storage and Configuration Hub, Test and Measurement Data Interface.

📱

Notebook Computer Interface Expansion

The PI7C9X442SLBFDE fits a notebook expansion design that needs more connectivity than a conventional one-port PCIe-to-USB bridge. The manufacturer describes the device as fanning out one PCIe x1 upstream port to two PCIe x1 downstream ports and four USB 2.0 ports, allowing one host link to support several device paths. This topology can simplify platform partitioning in compact computers, embedded notebooks, and portable industrial systems. The principal performance consideration is the shared PCIe x1 upstream bandwidth: traffic from both PCIe links and four USB ports ultimately uses that upstream path. Layout and power validation should follow the manufacturer datasheet, particularly for controlled-impedance routing and supply decoupling around the 128-LQFP package.

🔧

PCIe-to-USB 2.0 Legacy Peripheral Bridge

The PI7C9X442SLBFDE is appropriate when a PCIe host must connect to USB 2.0-era peripherals that lack a native PCIe interface. Its integrated PCIe-to-USB 2.0 bridge provides four USB 2.0 downstream ports, while the packet-switch function adds two PCIe x1 downstream paths for additional expansion. This mixed connectivity is useful in industrial controllers, test systems, and legacy equipment upgrades where both interface types are required. Compared with a discrete packet switch plus USB bridge implementation, the consolidated device can reduce board partitioning. Designers must still account for connector protection, USB device power requirements, host software support, and the aggregate bandwidth limitation of the single PCIe x1 upstream connection.

🏭

Embedded Industrial Controller

The PI7C9X442SLBFDE can serve an embedded industrial controller that combines PCIe expansion with USB 2.0 peripherals on one board. One upstream PCIe x1 connection provides access to two downstream PCIe x1 ports and four USB 2.0 ports, which supports storage, configuration, data-acquisition, or service peripherals within a single system architecture. Its multifunction design may simplify routing compared with separate switching and bridge devices. Industrial implementations should verify operating-temperature limits, supply tolerances, clock requirements, and available device drivers using the manufacturer datasheet. Because the upstream link is x1, it is also necessary to estimate simultaneous traffic and avoid designing a workload that assumes independent full bandwidth on every downstream port.

🖥️

Multifunction Peripheral System

The PI7C9X442SLBFDE suits a multifunction peripheral system that needs both PCIe and USB 2.0 connectivity. The two PCIe x1 downstream ports can support compatible high-speed add-in functions, while four USB 2.0 ports accommodate keyboards, storage, service interfaces, and other peripherals. The device allows simultaneous access to multiple downstream resources according to Diodes Incorporated, making it more capable than a dedicated one-port USB bridge. Firmware must support the packet-switch and USB-bridge functions expected by the host platform. Signal-integrity review should include the complete routing between the upstream connector, internal devices, and external USB connectors, with connector placement and ESD-protection strategy treated as separate design tasks.

💾

PCIe Storage and Configuration Hub

The PI7C9X442SLBFDE can act as a connectivity hub for PCIe storage, configuration devices, and USB 2.0 service ports in a compact embedded platform. The packet-switch function provides two downstream PCIe x1 routes, while the bridge function exposes four USB 2.0 connections for maintenance, boot support, or peripheral data transfer. This architecture reduces the number of separate host-facing interface blocks on the logic board. Engineers should partition traffic so high-priority PCIe operations are not unexpectedly constrained by concurrent USB activity through the shared upstream x1 link. Thermal validation should include actual controller loading, connector dissipation, and ambient conditions at the board level rather than relying only on the junction-temperature limit in the device documentation.

🧩

Test and Measurement Data Interface

The PI7C9X442SLBFDE can support a test and measurement platform that needs a PCIe host link, multiple internal PCIe devices, and USB 2.0 service peripherals. Two downstream PCIe x1 ports can connect compatible measurement or storage modules, while four USB 2.0 ports provide access to instruments, configuration media, and service equipment. The integrated Swidge architecture simplifies the logical interconnect compared with separate PCIe switching and USB bridging. For deterministic operation, engineers should characterize the traffic generated by each peripheral and confirm that the application does not expect concurrent full-rate traffic on every downstream interface. The board design must follow the manufacturer layout guidance and provide appropriate isolation between high-speed digital routes and external connector transients.

סיכום מוצרים מומלצים

PI7C9X442SL Manufacturer product family for the same Swidge device בשימוש ב-: Notebook Computer Interface Expansion, PCIe-to-USB 2.0 Legacy Peripheral Bridge, Embedded Industrial Controller, Multifunction Peripheral System, PCIe Storage and Configuration Hub, Test and Measurement Data Interface PI7C9X442SLBFDE Diodes Incorporated בשימוש ב-: Notebook Computer Interface Expansion, PCIe-to-USB 2.0 Legacy Peripheral Bridge, Embedded Industrial Controller, Multifunction Peripheral System, PCIe Storage and Configuration Hub, Test and Measurement Data Interface
What is the PI7C9X442SLBFDE?
The PI7C9X442SLBFDE is a PCI Express-to-USB 2.0 Swidge that combines a PCIe packet switch with a PCIe-to-USB 2.0 bridge. According to the Diodes Incorporated product page, it fans out one PCIe x1 upstream connection to two PCIe x1 downstream ports and four USB 2.0 ports. It is packaged in a 128-LQFP measuring 14 x 14 mm.
How many PCIe and USB ports does the PI7C9X442SLBFDE provide?
The PI7C9X442SLBFDE provides one upstream PCIe x1 port, two downstream PCIe x1 ports, and four USB 2.0 ports. According to Diodes Incorporated, simultaneous access to multiple downstream resources is supported. These counts describe the logical port topology; usable bandwidth is still constrained by the shared PCIe x1 upstream link.
Where can I download the PI7C9X442SLBFDE datasheet PDF?
The official PI7C9X442SL datasheet and product documentation can be reached from the Diodes Incorporated PI7C9X442SL product page at https://www.diodes.com/part/view/PI7C9X442SL. Use the manufacturer document for the complete pin list, electrical characteristics, reference application circuit, and recommended 128-LQFP layout.
Where can I find the PI7C9X442SLBFDE pinout?
The PI7C9X442SLBFDE pinout is defined by the manufacturer datasheet for the PI7C9X442SL family in its 128-LQFP 14 x 14 mm package. The exact signal names must be taken from the package drawing and pin-description table because no complete 128-pin pinout is reproduced on this product overview. Cross-check every net against the selected board revision.
What can replace the PI7C9X442SLBFDE?
A valid drop-in replacement for the PI7C9X442SLBFDE must use the same 128-LQFP footprint, preserve the 128-pin signal assignment, and match the one-upstream/two-downstream PCIe x1 plus four-USB 2.0 topology. No independently verified drop-in replacement was identified, so do not substitute a device based only on package size or generic PCIe-to-USB functionality.
Is PI7C9X442SLBFDE suitable for a notebook computer expansion design?
Yes, the PI7C9X442SLBFDE is suitable for notebook expansion when the design requires one PCIe x1 host connection, two downstream PCIe x1 links, and four USB 2.0 ports. Diodes Incorporated identifies notebook computer interface applications for the 128-LQFP device. Validate platform firmware, connector requirements, power budgets, and the shared upstream-bandwidth budget before release.
PI7C9X442SLBFDE vs PI7C9X2G404SLBFDE: which one is suitable for a PCIe-to-USB design?
The PI7C9X442SLBFDE is the appropriate choice when the design needs the documented PCI Express-to-USB 2.0 Swidge function: one PCIe x1 upstream port, two PCIe x1 downstream ports, and four USB 2.0 ports. The PI7C9X2G404SLBFDE is a different device family, so its shared LQFP package does not establish pin-to-pin compatibility or functional equivalence.
When should I choose the PI7C9X442SLBFDE instead of a single-port PCIe-to-USB bridge?
Choose the PI7C9X442SLBFDE when the system needs an integrated PCIe packet switch, two PCIe x1 downstream ports, and four USB 2.0 ports from one host connection. A single-port bridge is more appropriate when only one USB 2.0 path is required. The PI7C9X442SLBFDE provides more connectivity but requires validation of power, routing, and shared upstream bandwidth.
Is the PI7C9X442SLBFDE the same as PI7C9X442SLBFDEX?
No. The final ordering suffix can encode manufacturer-specific packaging or delivery options, so PI7C9X442SLBFDEX should not be treated as interchangeable without confirmation from the manufacturer. Use the exact ordering code specified on the purchase order and verify that its package, pinout, temperature grade, and shipping format match the PCB design.
Where to buy PI7C9X442SLBFDE online?
Use the Request a Quote form on this XAIPART page to request PI7C9X442SLBFDE availability, volume pricing, and lead time. The form allows buyers to specify quantities, package requirements, and shipment destinations without relying on a stale retail price. The manufacturer product page is also available for confirming device identity and documentation.
What is the price of PI7C9X442SLBFDE?
Submit the PI7C9X442SLBFDE Request a Quote form on this page for current pricing and minimum-order information. The quoted result should reflect the requested quantity and package format. Because this specialized interface IC may have limited distribution, confirm lifecycle status, allocation, and delivery timing with each quotation.
What is the lead time for PI7C9X442SLBFDE?
Current lead time for the PI7C9X442SLBFDE should be requested through the Request a Quote form on this page. Include the required quantity, date code preference, and shipment destination so the supplier can confirm whether the 128-LQFP device is available for allocation. Do not assume that general marketplace visibility guarantees immediate inventory.
Is PI7C9X442SLBFDE in stock?
Use the Request a Quote form on this XAIPART page to request a current stock and allocation response for PI7C9X442SLBFDE. Stock status for specialized interface ICs can change rapidly and may depend on quantity, package format, and region. Include your required quantity and target delivery date in the quotation request.
What are the key specifications of PI7C9X442SLBFDE that engineers should know?
The PI7C9X442SLBFDE integrates one upstream PCIe x1 link, two downstream PCIe x1 links, and four USB 2.0 ports in a 128-LQFP 14 x 14 mm package. According to Diodes Incorporated, it supports simultaneous access to multiple downstream resources. The principal design constraints are the shared x1 bandwidth, 128-pin routing complexity, and platform-specific power and firmware requirements.
How should the PI7C9X442SLBFDE PCIe and USB signals be routed?
Route the PI7C9X442SLBFDE PCIe and USB interfaces as controlled-impedance differential interconnects with continuous reference planes and minimal stubs. Follow the manufacturer reference layout for pin escapes, supply connections, decoupling, and the 128-LQFP footprint. Keep high-speed nets away from noisy switching nodes and provide short ground-return paths beneath the complete interface area.

נתוני עזר הנדסיים עבור PI7C9X442SLBFDE — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the PI7C9X442SLBFDE when a platform must combine a PCIe packet switch with USB 2.0 host bridging and needs one upstream PCIe x1 link to reach two downstream PCIe x1 ports and four USB 2.0 ports. It is particularly suitable for notebook and embedded expansion systems where consolidating interface functions simplifies board partitioning. A single-port PCIe-to-USB bridge is preferable for simpler designs with only one USB 2.0 device. Do not select the PI7C9X2G404SLBFDE solely because it uses a related package; the published topology indicates a different device family. No drop-in alternative was independently verified for the PI7C9X442SLBFDE. Before ordering a substitute, require an exact 128-pin assignment, matching clock and power requirements, equivalent downstream-port counts, and validated host firmware support.

השוואה עם חלופות

פרמטר מוצר זה
Brand Diodes Incorporated
Package 128-LQFP (14 x 14 mm)
Product Function PCIe-to-USB 2.0 Swidge
Upstream PCIe Ports 1 x PCIe x1
Downstream PCIe Ports 2 x PCIe x1
USB 2.0 Ports 4 ports
Simultaneous Downstream Access Supported
Pin Count 128 pins

מבדילים עיקריים

  • Integrated packet-switch and USB-bridge functionality (לעומתSingle-port PCIe-to-USB bridge)
  • Concurrent PCIe and USB expansion (לעומתDiscrete PCIe switch plus USB bridge implementation)
  • Simultaneous downstream-resource access (לעומתBasic point-to-point PCIe-to-USB bridge)

הערות תכנון

Route the PCIe and USB interfaces as controlled-impedance differential signals with continuous reference planes and no unnecessary stubs. Follow the manufacturer reference layout for the PI7C9X442SL in its 128-LQFP 14 x 14 mm package. Because the package exposes 128 connections, verify every pin assignment against the datasheet and confirm that the PCB land pattern matches the exact ordering code before releasing artwork.

Place decoupling capacitors close to the appropriate supply pins and keep the high-frequency return path continuous beneath the device. Separate noisy USB or PCIe connector return currents from sensitive internal reference paths where the board stack-up permits. Validate the complete supply network under simultaneous downstream activity rather than estimating current from only one connected peripheral.

Do not treat the two downstream PCIe x1 links and four USB 2.0 ports as independent full-bandwidth channels. All traffic shares the single PCIe x1 upstream link, so workload testing should include realistic concurrent transfers. Also avoid assuming that a device in the same LQFP family is a drop-in replacement; verify the exact pinout, clocking, firmware, and functional requirements.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The product pages identify Diodes Incorporated as the manufacturer, but the available product information does not explicitly state the requested compliance classifications. Confirm each status in the current manufacturer documentation before production release.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

PI7C9X442SLBFDE PI7C9X442SLBFDE datasheet PI7C9X442SLBFDE datasheet pdf PI7C9X442SLBFDE pinout PI7C9X442SLBFDE equivalent PI7C9X442SLBFDE replacement PI7C9X442SLBFDE cross reference PI7C9X442SLBFDE schematic PI7C9X442SLBFDE footprint PI7C9X442SLBFDE price PI7C9X442SLBFDE stock Diodes PI7C9X442SLBFDE PCIe x1 to 4 USB 2.0 bridge 128-LQFP PCIe USB bridge IC

רכיבים ומונחים קשורים

Diodes Incorporated PI7C9X442SLBFDE PI7C9X442SL PI7C9X2G404SLBFDE PI7C9X442SLBFDEX PCI Express PCIe USB 2.0 Swidge PCIe packet switch PCIe-to-USB bridge interface IC semiconductor notebook computer interface industrial controller multifunction peripheral PCIe x1 simultaneous downstream access 128-LQFP LQFP surface mount controlled-impedance routing supply decoupling shared upstream bandwidth
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר