PIC16C65A-10I/L - 8-Bit 10MHz OTP MCU 7KB | Microchip
Référence : PIC16C65A-10I/L ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $13.5 | $13,50 |
| 10 | $12.1 | $121,00 |
| 100 | $10.5 | $1 050,00 |
| 500 | $9.25 | $4 625,00 |
| 1 000 | $8.2 | $8 200,00 |
PIC16C65A-10I/L Présentation
An 8-bit microcontroller (MCU) is a small, self-contained computing system on a single chip that integrates a CPU, program memory (ROM/EPROM/Flash/OTP), working RAM, and programmable I/O peripherals. The PIC16C6X family uses a Harvard RISC architecture with separate program and data buses, only 35 single-word instructions, and all single-cycle instruction execution except program branches (which take two cycles). In the system hierarchy this places PIC16C65A-10I/L at: 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor IC.
Key features include 33 I/O lines spread across multiple ports, a peripheral feature set derived from PIC16C66/67 (synchronous/asynchronous serial ports, PWM, capture/compare timers, 8-bit A/D converter channeling), brown-out reset, watchdog timer, and low-power SLEEP/idle modes. The OTP program memory is one-time programmable using programmers such as MPLAB PM3, which is a hard requirement for production designs where firmware is finalized.
Typical applications include industrial control panels, instrumentation, motor control front-ends, sensor interfacing nodes, and legacy embedded systems that require a robust 8-bit core with abundant I/O. Industrial-grade temperature rating (-40C to +85C) and the 44-pin PLCC package make it a strong fit for through-hole-style industrial backplanes and field-replaceable modules.
When designing with this device, ensure that the chosen programmer supports the PIC16C65A OTP window (PM3 recommended) and that the brown-out and watchdog configuration bits match the application's fault-recovery strategy. Note that OTP parts cannot be re-programmed, so firmware validation must be finalized before production programming.
This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives in the 44-PLCC footprint, and practical design notes not found in the standalone manufacturer datasheet.
Alternatives de remplacement direct pour PIC16C65A-10I/L — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16C65A-10I/L (même facteur de forme et même empreinte) — différant par Package, Program Memory Size, Program Memory Type, Core, Maximum Clock Frequency.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16C65A-10/L
✅ Remplacement direct✓ En stock
$9.2 / unité
Voir la fiche technique →PIC16C65B-04I/L
✅ Remplacement direct✓ En stock
$5.3 / unité
Voir la fiche technique →PIC16C65A-04I/L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16C65A-04E/L
✅ Remplacement direct✓ En stock
$11.2 / unité
Voir la fiche technique →PIC16C64A-10I/L
✅ Remplacement direct✓ En stock
$3.45 / unité
Voir la fiche technique →PIC16C64A-10/L
✅ Remplacement direct✓ En stock
$5.5 / unité
Voir la fiche technique →PIC16C65A-10I/L Valeurs maximales et caractéristiques électriques
| Core | PIC16C6X 8-bit RISC |
| Program Memory Size | 7 KB (4K x 14) OTP EPROM |
| RAM Size | 192 bytes |
| EEPROM Size | 0 bytes (none) |
| Fréquence d'horloge maximale | 10 MHz (DC to 20 MHz clock input) |
| Largeur du bus de données | 8-bit |
| Number of I/O Pins | 33 |
| Tension d'alimentation de fonctionnement | 2.5 V to 6.0 V (wide range, up to 6.0 V) |
| Plage de température de fonctionnement | -40 C to +85 C (Industrial) |
| Typical Supply Current @ 5V 4 MHz | 15 uA typical |
| Typical Supply Current @ 3V 32 kHz | 1 uA typical |
| Boîtier | 44-PLCC (J-lead, 16.59x16.59 mm) |
| Package Code | QCCJ |
| Type de montage | Surface Mount |
| Instruction Set | 35 single-word instructions |
| Programmer Support | MPLAB PM3 Universal Device Programmer |
Configuration des broches de PIC16C65A-10I/L
| Broche 1 | MCLR — Master Clear (Reset) input, active low |
| Broche 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Broche 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Broche 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| Broche 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / VREF |
| Broche 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Broche 7 | RA5/SS/AN4 — PORTA bit 5 / Slave Select / Analog input 4 |
| Broche 8 | RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5 |
| Broche 9 | RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6 |
| Broche 10 | RE2/CS/AN7 — PORTE bit 2 / Chip Select / Analog input 7 |
| Broche 11 | VDD — Positive supply voltage |
| Broche 12 | VSS — Ground |
| Broche 13 | OSC1/CLKIN — Oscillator input / external clock input |
| Broche 14 | OSC2/CLKOUT — Oscillator output / clock output |
| Broche 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Broche 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Broche 17 | RC2/CCP1 — PORTC bit 2 / CCP1 (PWM/capture/compare) |
| Broche 18 | RC3/SCK/SCL — PORTC bit 3 / SPI SCK / I2C SCL |
| Broche 19 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| Broche 20 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| Broche 21 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| Broche 22 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| Broche 23 | RC4/SDI/SDA — PORTC bit 4 / SPI SDI / I2C SDA |
| Broche 24 | RC5/SDO — PORTC bit 5 / SPI SDO |
| Broche 25 | RC6/TX/CK — PORTC bit 6 / USART TX / USART CK |
| Broche 26 | RC7/RX/DT — PORTC bit 7 / USART RX / USART DT |
| Broche 27 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| Broche 28 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| Broche 29 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| Broche 30 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| Broche 31 | VSS — Ground |
| Broche 32 | VDD — Positive supply voltage |
| Broche 33 | RB0/INT — PORTB bit 0 / External interrupt input |
| Broche 34 | RB1 — PORTB bit 1 |
| Broche 35 | RB2 — PORTB bit 2 |
| Broche 36 | RB3 — PORTB bit 3 |
| Broche 37 | RB4 — PORTB bit 4 |
| Broche 38 | RB5 — PORTB bit 5 |
| Broche 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Broche 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| Broche 41 | NC — Not connected (per datasheet) |
| Broche 42 | NC — Not connected (per datasheet) |
| Broche 43 | NC — Not connected (per datasheet) |
| Broche 44 | NC — Not connected (per datasheet) |
Applications typiques
PIC16C65A-10I/L convient pour 6 applications: Industrial Control Panels, Instrumentation and Data Acquisition Front-Ends, Sensor Interfacing and HVAC Nodes, Motor Control Front-Ends (Brushed DC / Stepper), Legacy Embedded Systems and Field-Replaceable Modules, User Interface / HMI Keypad and LCD Controllers.
Industrial Control Panels
The PIC16C65A-10I/L fits industrial control panels because of its 33 I/O pins (sufficient for keypad scanning, LED/LCD multiplexing, relay drivers, and discrete sensor inputs) and its industrial-grade -40C to +85C temperature range, which is required for factory-floor enclosures. With 7 KB OTP and 192 bytes RAM, it can run PID algorithms, manage HMI scan loops, and drive 7-segment or character-LCD displays without external glue logic. Its 15 uA typical operating current at 5V/4 MHz is a strong fit for 24V-powered cabinet systems with simple linear regulators. The 44-pin PLCC package also supports socketed field replacement on legacy panels.
Recommandé
Instrumentation and Data Acquisition Front-Ends
In instrumentation front-ends, the PIC16C65A-10I/L provides 33 I/O lines that can directly drive multiplexed analog front-ends, sample-and-hold circuits, and display readouts. The PIC16C6X core integrates timers suitable for capture/compare operations used in frequency and period measurement. Its 7 KB OTP program memory holds calibration tables and linearization routines for sensors. Wide 2.5V-6.0V supply tolerance allows the part to share rails with analog sections powered directly from unregulated supplies. Industrial temperature grade makes it suitable for laboratory and field-portable instruments.
Recommandé
Sensor Interfacing and HVAC Nodes
The PIC16C65A-10I/L suits distributed HVAC and building-automation sensor nodes because it can scan multiple temperature/humidity sensors over its 33 I/O pins while consuming only 1 uA typical at 3V/32 kHz during sleep. The PIC16C6X core's low-power SLEEP mode combined with watchdog-based wake-up enables battery-powered or energy-harvested nodes with years of operating life. Industrial temperature tolerance supports rooftop and plant-floor installations. The 44-pin PLCC package also provides mechanical robustness against vibration in equipment-cabinet mounting.
Recommandé
Motor Control Front-Ends (Brushed DC / Stepper)
For brushed-DC and unipolar stepper motor control front-ends, the PIC16C65A-10I/L delivers PWM outputs through its CCP module and 33 I/O lines for H-bridge enable, direction, and current-sense feedback. The 7 KB OTP is adequate for trapezoidal commutation tables and acceleration ramps. Operating from 5V with 15 uA typical current keeps power dissipation low for densely packed control boards. Industrial temperature grade supports under-hood and outdoor cabinet deployments. The 44-pin PLCC also allows easy socketed replacement during commissioning and field service.
Recommandé
Legacy Embedded Systems and Field-Replaceable Modules
The PIC16C65A-10I/L is a strong fit for maintaining long-lifecycle legacy equipment because the 44-pin PLCC socket allows field replacement without desoldering. With 7 KB OTP and 192 bytes RAM, it can serve as a drop-in controller for legacy industrial protocols and proprietary field buses. Its DC to 20 MHz clock input range (10 MHz speed grade here) provides timing headroom for bit-banged serial interfaces. Industrial temperature rating is required for many factory-floor installations. Because the part is now obsolete, designers often use PIC16C65A-10I/L as a known-good replacement for service stock.
Recommandé
User Interface / HMI Keypad and LCD Controllers
The PIC16C65A-10I/L is well-suited for keypad-and-LCD HMI controllers with 33 I/O pins enabling 4x4 or 5x5 matrix keypads, multiple status LEDs, and character-LCD interfaces (4-bit or 8-bit mode). Its 7 KB OTP program memory holds menu state machines and string tables for character displays, while 192 bytes RAM holds screen buffers and key-debounce state. 10 MHz instruction throughput keeps display refresh rates fast enough to avoid flicker on multiplexed LED arrays. Industrial temperature grade supports outdoor kiosks and machine-front panels in harsh environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16C65A-10I/L — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16C65A-10/L | PIC16C65B-04I/L | PIC16C65A-04I/L | PIC16C64A-10I/L |
|---|---|---|---|---|---|
| Package | PLCC-44 (QCCJ) | PLCC-44 (QCCJ) - same | PLCC-44 (QCCJ) - same | PLCC-44 (QCCJ) - same | PLCC-44 (QCCJ) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 7 KB (4K x 14) OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 3.5 KB (-50%) |
| RAM | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 128 bytes (-33%) |
| Maximum Clock | 10 MHz | 10 MHz | 4 MHz (-60%) | 4 MHz (-60%) | 10 MHz |
| I/O Pins | 33 | 33 | 33 | 33 | 33 |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) |
| Silicon Revision | PIC16C65A | PIC16C65A | PIC16C65B (improved) | PIC16C65A | PIC16C64A |
Principaux différenciateurs
- Highest memory configuration in PIC16C6X family at 10 MHz speed grade (vs PIC16C64A-10I/L)
- Industrial temperature grade (-40C to +85C) (vs PIC16C65A-10/L)
- Full 10 MHz speed grade for performance headroom (vs PIC16C65A-04I/L)
Notes de conception
PIC16C65A-10I/L uses One-Time Programmable (OTP) EPROM - the device can be programmed exactly once and cannot be erased or re-programmed. Always validate firmware on a flash-based PIC16F equivalent or development part before committing to OTP programming in production. A single configuration-bit error at programming time destroys the part. Use the MPLAB PM3 Universal Device Programmer with verified programming scripts.
The PIC16C65A-10I/L operates from 2.5V to 6.0V with 15 uA typical current at 5V/4 MHz and 1 uA typical at 3V/32 kHz. The wide supply range allows direct connection to 5V linear rails but verify decoupling: place a 100 nF ceramic capacitor close to VDD (pin 5 on 44-PLCC) and a bulk capacitor (10 uF or larger) on the supply node. Brown-out reset configuration bits must be set to match the application's minimum operating voltage to avoid spurious resets.
The 44-pin PLCC package is surface-mount J-lead (16.59x16.59 mm body) with package code QCCJ. Use a socket (e.g., 44-PLCC through-hole or SMD socket) for prototype and field-service designs to allow easy replacement - the part is obsolete so serviceability matters. Place decoupling capacitors within 5 mm of each VDD/VSS pair and route MCLR with a short trace and 10 kohm pull-up to VDD for proper reset behavior.
Estimated: at 5V supply, 10 MHz clock, and full I/O loading, the PIC16C65A-10I/L dissipation is below 50 mW (typical 5 mA I-dd + I/O current). Junction temperature rise is minimal even at industrial 85C ambient - thermal management is not a primary concern for this CMOS MCU. Ensure however that I/O sink/source currents stay within the datasheet maximum per-pin (typically 25 mA) and per-port limits to avoid on-die heating.
Informations de conformité
Compliance status not explicitly stated in the verified web data. PIC16C65A family is industrial-temperature-rated but not AEC-Q100 qualified for automotive. RoHS status unknown - this part predates widespread RoHS transition so may be non-compliant; check with Microchip for the latest compliance documentation.
