PIC16C72T-10E/SS - 8-Bit 3.5KB EPROM MCU, 10MHz, 28-SSOP | Microchip
Référence : PIC16C72T-10E/SS ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.42 | $8,42 |
| 10 | $7.59 | $75,90 |
| 100 | $6.78 | $678,00 |
| 500 | $6.05 | $3 025,00 |
| 1 000 | $5.42 | $5 420,00 |
PIC16C72T-10E/SS Présentation
An 8-bit microcontroller (MCU) is a single-chip microcomputer that integrates a CPU, program memory, data RAM, peripherals (timers, ADC, communication ports), and I/O onto one silicon die. The PIC16C7X family belongs to the PIC mid-range architecture, itself a member of the broader 8-bit MCU category, which sits hierarchically beneath microcontrollers and embedded processors in the semiconductor taxonomy. Mid-range PIC cores combine deterministic single-cycle instruction execution with a small RISC instruction set of 35 single-word instructions, making them accessible to legacy embedded designs and easy to program in assembly or C.
Key features of the PIC16C72T-10E/SS include 22 digital I/O lines, three timers (Timer0, Timer1, Timer2), a synchronous serial port (SSP) supporting SPI and I²C, a USART with 9-bit address masking, 8 channels of 8-bit ADC, and 256 bytes of EEPROM data memory on-chip. The 10MHz oscillator drives a 4-clock-per-instruction pipeline that delivers an effective 10 MIPS throughput. Brown-out reset, power-on reset, watchdog timer with its own on-chip RC oscillator, and an in-circuit debugger (ICD) interface round out the on-chip peripherals.
Typical applications include industrial control loops, sensor conditioning and signal acquisition, motor drive gating, HVAC controllers, automotive body and interior subsystems, and small white-goods appliances. The integrated ADC eliminates external converter ICs in many low-channel-count analog front ends, while the USART enables communication with operator panels or host processors.
Designers should note that the PIC16C72 is OTP-based, so firmware cannot be field-upgraded; for flash-based drop-in alternatives from the same family, consider PIC16F72. Programming requires a Microchip ICD or third-party programmer supporting mid-range PIC devices.
This page synthesizes current distributor inventory, family-aware drop-in pin-compatible devices, and engineering design notes not collected on a single manufacturer datasheet page.
Alternatives de remplacement direct pour PIC16C72T-10E/SS — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16C72T-10E/SS (même facteur de forme et même empreinte) — différant par Core Architecture, Operating Temperature, Timers, Program Memory Size, Program Memory Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16C72-10I/SS
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16C72-10/SS
✅ Remplacement direct✓ En stock
$5.62 / unité
Voir la fiche technique →PIC16C72-20I/SS
✅ Remplacement direct✓ En stock
$5.1 / unité
Voir la fiche technique →PIC16C72-20E/SS
✅ Remplacement direct✓ En stock
$4.04 / unité
Voir la fiche technique →PIC16F72-I/SS
✅ Remplacement direct✓ En stock
$2.19 / unité
Voir la fiche technique →PIC16F73-I/SS
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16C72T-10E/SS Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC16C7X mid-range 8-bit RISC |
| Program Memory Size | 3.5 KB (2K x 14) OTP EPROM |
| RAM Size | 128 bytes |
| EEPROM Data Memory | 256 bytes (on-chip) |
| Fréquence d'horloge maximale | 10 MHz |
| Instruction Throughput | 10 MIPS |
| Supply Voltage (Vdd) | 4.0 V to 5.5 V |
| I/O Pins | 22 |
| ADC Channels | 8 channels x 8-bit |
| Timers | 3 (Timer0, Timer1, Timer2) |
| Communication Peripherals | SSP (SPI/I2C), USART/SCI |
| Température de fonctionnement | -40 °C to +125 °C (Extended 'E') |
| Package Type | 28-pin SSOP (5.30 mm body) |
| Type de montage | Surface Mount |
| Packaging | Tape and Reel ('T' suffix) |
| Instruction Set Size | 35 single-word instructions |
| Program Memory Type | OTP EPROM |
Configuration des broches de PIC16C72T-10E/SS
| Broche 1 | MCLR/Vpp — Master Clear (active low reset) / Programming voltage input |
| Broche 2 | RA0/AN0 — Digital I/O / Analog input channel 0 |
| Broche 3 | RA1/AN1 — Digital I/O / Analog input channel 1 |
| Broche 4 | RA2/AN2 — Digital I/O / Analog input channel 2 |
| Broche 5 | RA3/AN3/VREF — Digital I/O / Analog input channel 3 / ADC reference voltage |
| Broche 6 | RA4/T0CKI — Digital I/O (open-drain) / Timer0 clock input |
| Broche 7 | RA5/AN4/SS — Digital I/O / Analog input channel 4 / SSP slave select |
| Broche 8 | Vss — Ground reference |
| Broche 9 | OSC1/CLKIN — Oscillator crystal input / external clock input |
| Broche 10 | OSC2/CLKOUT — Oscillator crystal output / clock output (Fosc/4) |
| Broche 11 | RC0/T1OSO/T1CKI — Digital I/O / Timer1 oscillator output / Timer1 clock input |
| Broche 12 | RC1/T1OSI/CCP2 — Digital I/O / Timer1 oscillator input / CCP2 module |
| Broche 13 | RC2/CCP1 — Digital I/O / CCP1 module (PWM/Capture/Compare) |
| Broche 14 | RC3/SCK/SCL — Digital I/O / SSP SPI clock / I²C clock |
| Broche 15 | RC4/SDI/SDA — Digital I/O / SSP SPI data in / I²C data |
| Broche 16 | RC5/SDO — Digital I/O / SSP SPI data out |
| Broche 17 | RC6/TX/CK — Digital I/O / USART asynchronous transmit / synchronous clock |
| Broche 18 | RC7/RX/DT — Digital I/O / USART asynchronous receive / synchronous data |
| Broche 19 | Vss — Ground reference (secondary) |
| Broche 20 | Vdd — Positive supply voltage (4.0 V to 5.5 V) |
| Broche 21 | RB0/INT — Digital I/O / External interrupt input |
| Broche 22 | RB1 — Digital I/O |
| Broche 23 | RB2 — Digital I/O |
| Broche 24 | RB3 — Digital I/O |
| Broche 25 | RB4 — Digital I/O / interrupt-on-change |
| Broche 26 | RB5 — Digital I/O / interrupt-on-change |
| Broche 27 | RB6/PGC — Digital I/O / interrupt-on-change / ICSP clock |
| Broche 28 | RB7/PGD — Digital I/O / interrupt-on-change / ICSP data |
Applications typiques
PIC16C72T-10E/SS convient pour 6 applications: Industrial Sensor Conditioning and Acquisition, Automotive Body and Interior Subsystems, HVAC and Building Climate Control, Small White-Goods Appliance Control, Power-Supply Secondary-Side Monitoring, Educational and Hobby Embedded Platforms.
Industrial Sensor Conditioning and Acquisition
The PIC16C72T-10E/SS is well-suited for industrial sensor-conditioning front ends because its 8-channel 8-bit ADC multiplexes multiple analog inputs onto a single chip, eliminating an external converter IC. The integrated ADC, combined with 22 digital I/O pins, supports up to 8 sensor channels plus digital I/O expansion for relay drivers or status LEDs. Operating at 10 MIPS gives designers enough throughput to run linearization, scaling, and digital filtering in software while maintaining update rates compatible with thermocouple, RTD, and bridge-sensor bandwidths. The extended -40 °C to +125 °C temperature grade tolerates harsh factory-floor environments without additional thermal hardening.
Recommandé
Automotive Body and Interior Subsystems
Within automotive body controllers - door modules, seat controllers, mirror adjusters - the PIC16C72T-10E/SS offers the right mix of I/O count, ADC channels, and serial communication for low-rate multiplexing tasks. The USART and SSP (SPI/I²C) peripherals allow communication with LIN bus transceivers, switch-scan matrices, and small graphic or LED segment displays. The 10 MHz core and 35-instruction mid-range core deliver deterministic interrupt latency for time-critical body-control loops, and the extended temperature grade (-40 °C to +125 °C) covers under-dash and under-hood-adjacent compartments. Designers targeting automotive should still validate AEC-Q100 status with Microchip FAE.
Recommandé
HVAC and Building Climate Control
HVAC controllers need to read multiple temperature, humidity, and pressure sensors while driving triacs, relays, and display modules - a workload well-matched to the PIC16C72T-10E/SS. The 8-channel ADC handles mixed analog inputs from NTC thermistors and pressure transducers without external multiplexers. SSP and USART support wall-thermostat or remote-sensor connectivity, while 22 I/O pins drive triac-fired blower motors and damper actuators. Extended temperature operation supports rooftop-unit enclosures, and the small SSOP-28 footprint fits inside compact control boards. Programming in C with the MPLAB XC16C compiler (or third-party compilers) eases firmware development.
Recommandé
Small White-Goods Appliance Control
Low-end white-goods appliances - washing machines, dishwashers, microwave ovens, and countertop cookers - benefit from the PIC16C72T-10E/SS because it integrates ADC, timers, and communication in one low-cost 8-bit core. The USART can interface with operator keypads or LED segment displays, while the SSP supports EEPROM storage of user preferences. The 22 I/O pins drive triac optocouplers, water-level sensors, motor relays, and buzzer outputs. For cost-sensitive designs, OTP-EPROM memory is acceptable when the firmware is finalized; PIC16F72 should be considered for service-updateable designs.
Recommandé
Power-Supply Secondary-Side Monitoring
The PIC16C72T-10E/SS can serve as a secondary-side monitor in switch-mode power supplies, sampling output voltage and current via its 8-bit ADC and reporting status through USART or I²C to a system controller. Its 4.0 V to 5.5 V supply range allows direct operation from a 5 V housekeeping rail, eliminating auxiliary regulators. Brown-out reset and watchdog timer with on-chip RC oscillator give two layers of fault protection when firmware lockup could damage downstream loads. The 35-instruction mid-range core executes deterministic control loops at 10 MHz, fast enough for voltage-mode secondary regulation in sub-500 W supplies.
Recommandé
Educational and Hobby Embedded Platforms
The PIC16C72T-10E/SS remains a popular teaching and hobbying MCU because the PIC16C7X mid-range architecture is well-documented and supported by Microchip's MPLAB X toolchain, simulators, and in-circuit debuggers. The SSOP-28 footprint breaks out enough I/O for breadboard-friendly breakout boards, while the integrated ADC, USART, and SSP give students hands-on exposure to mixed-signal embedded design. Programming examples cover assembly language, C, and Basic, and the OTP nature reinforces firmware-budget discipline. However, learners often migrate to PIC16F72 or PIC18F equivalents for re-programmability.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16C72T-10E/SS — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16C72-10I/SS | PIC16C72-10/SS | PIC16C72-20I/SS | PIC16C72-20E/SS | PIC16F72-I/SS | PIC16F73-I/SS |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SSOP | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Program Memory | 3.5 KB OTP EPROM | 3.5 KB OTP EPROM | 3.5 KB OTP EPROM | 3.5 KB OTP EPROM | 3.5 KB OTP EPROM | 3.5 KB Flash | 7 KB Flash |
| Maximum Clock | 10 MHz | 10 MHz | 10 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Temperature Grade | Extended -40C to +125C | Industrial -40C to +85C | Commercial 0C to +70C | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C |
| ADC Resolution | 8-bit / 8 ch | 8-bit / 8 ch | 8-bit / 8 ch | 8-bit / 8 ch | 8-bit / 8 ch | 8-bit / 8 ch | 8-bit / 5 ch |
| Program Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | Flash | Flash |
| Packaging Media | Tape and Reel | Tube | Tube | Tube | Tube | Tube | Tube |
Principaux différenciateurs
- Extended temperature grade in SSOP-28 form factor (vs PIC16C72-10I/SS)
- Tape-and-reel packaging for high-volume SMT (vs PIC16C72-10/SS)
- Drop-in flash upgrade path (vs PIC16C72-10/SS)
Notes de conception
Decouple Vdd (pin 20) and Vss (pins 8 and 19) with a 100 nF ceramic capacitor placed within 5 mm of the package. For ADC accuracy, add a 10 µF bulk capacitor on Vdd and a local 100 nF at AVdd if used. The PIC16C72T-10E/SS can source/sink up to 25 mA per I/O, so LED-driving lines should use series resistors to limit continuous current. Brown-out reset should be enabled in configuration fuses to guarantee safe startup when Vdd falls below 4.0 V.
The 28-SSOP package has a 0.65 mm pitch and a thermal pad-free lead frame, so standard 4-layer PCB stack-ups provide adequate thermal dissipation for the few-hundred-mW power budget of this MCU. Place an unbroken ground pour directly under the SSOP body to minimize ground bounce and provide a low-impedance return path for switching outputs. Keep the oscillator crystal and load capacitors within 5 mm of OSC1 and OSC2 to avoid stray capacitance that could detune the oscillator.
Two common pitfalls when designing with the PIC16C72T-10E/SS: (1) forgetting that the device is OTP-EPROM, which means firmware cannot be rewritten after programming - use PIC16F72-I/SS if field updates are required; (2) the MCLR/Vpp pin must rise cleanly above Vih with a minimum rise time of 1 µs or the part may intermittently fail to start; tie MCLR to Vdd through a 10 kΩ resistor and add a diode if Vpp injection is used during in-circuit programming. Also note that PORTE pins (RE0, RE1, RE2) on the PIC16C73/74 are absent on the PIC16C72 because it has fewer ADC channels.
Informations de conformité
RoHS, REACH, AEC-Q100, lead-free and halogen-free status not provided in the verified web data; designers should consult Microchip product environmental compliance portal for definitive certificates.
