PIC16C77-20/P - 8-bit 20MHz OTP MCU 14KB | Microchip
Référence : PIC16C77-20/P ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.55 | $5,55 |
| 10 | $5.1 | $51,00 |
| 100 | $4.65 | $465,00 |
| 500 | $4.2 | $2 100,00 |
| 1 000 | $3.85 | $3 850,00 |
PIC16C77-20/P Présentation
Alternatives de remplacement direct pour PIC16C77-20/P — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16C77-20/P (même facteur de forme et même empreinte) — différant par Package, Serial Interfaces, Timers, Core Architecture, Program Memory Size.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16F77-I/P
✅ Remplacement direct✓ En stock
$8.4 / unité
Voir la fiche technique →PIC16F77-E/P
✅ Remplacement direct✓ En stock
$5.04 / unité
Voir la fiche technique →PIC16C77-10/P
✅ Remplacement direct✓ En stock
$5.25 / unité
Voir la fiche technique →PIC16C77-04/PT
✅ Remplacement direct✓ En stock
$6.08 / unité
Voir la fiche technique →PIC16C77-20I/P
✅ Remplacement direct✓ En stock
$8.65 / unité
Voir la fiche technique →PIC16C74B-20I/PT
✅ Remplacement direct✓ En stock
$4.62 / unité
Voir la fiche technique →PIC16C76-20/P
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16C77-20/P Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC16C mid-range 8-bit RISC |
| Clock Speed (max) | 20 MHz |
| Instruction Cycle | 200 ns |
| Program Memory | 14 KB (8K x 14) OTP |
| RAM | 368 bytes |
| I/O Pins | 33 |
| A/D Converter | 8 channels, 8-bit |
| Tension d'alimentation | 4.0 V to 5.5 V (range to 6.0 V) |
| I/O Sink/Source Current | 25 mA / 25 mA |
| Timers | 3 (Timer0, Timer1, Timer2) |
| Communication | USART, SSP (SPI/I2C) |
| Température de fonctionnement | Commercial, Industrial, Extended ranges |
| Boîtier | 40-pin PDIP (0.300 inch, windowed CERDIP option) |
| Type de montage | Through-Hole |
| Instruction Set | 35 single-word instructions |
| Low-Power Consumption | 15 µA typical at 5 V/4 MHz; 1 µA standby at 3 V/32 kHz |
Configuration des broches de PIC16C77-20/P
| Broche 1 | MCLR/VPP — Master Clear (reset) input or programming voltage |
| Broche 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Broche 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Broche 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| Broche 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / VREF+ |
| Broche 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Broche 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SSP slave select |
| Broche 8 | RE0/RD — PORTE bit 0 / Parallel slave port read control |
| Broche 9 | RE1/WR — PORTE bit 1 / Parallel slave port write control |
| Broche 10 | RE2/CS — PORTE bit 2 / Parallel slave port chip select |
| Broche 11 | VDD — Positive supply voltage |
| Broche 12 | VSS — Ground reference |
| Broche 13 | OSC1/CLKIN — Oscillator crystal input / external clock |
| Broche 14 | OSC2/CLKOUT — Oscillator crystal output / clock out |
| Broche 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / clock input |
| Broche 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Broche 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Broche 18 | RC3/SCK/SCL — PORTC bit 3 / SSP clock |
| Broche 19 | RD0/PSP0 — PORTD bit 0 / Parallel slave port bit 0 |
| Broche 20 | RD1/PSP1 — PORTD bit 1 / Parallel slave port bit 1 |
| Broche 21 | RD2/PSP2 — PORTD bit 2 / Parallel slave port bit 2 |
| Broche 22 | RD3/PSP3 — PORTD bit 3 / Parallel slave port bit 3 |
| Broche 23 | RC4/SDI/SDA — PORTC bit 4 / SSP data in / I2C data |
| Broche 24 | RC5/SDO — PORTC bit 5 / SSP data out |
| Broche 25 | RC6/TX/CK — PORTC bit 6 / USART transmit / clock |
| Broche 26 | RC7/RX/DT — PORTC bit 7 / USART receive / data |
| Broche 27 | RD4/PSP4 — PORTD bit 4 / Parallel slave port bit 4 |
| Broche 28 | RD5/PSP5 — PORTD bit 5 / Parallel slave port bit 5 |
| Broche 29 | RD6/PSP6 — PORTD bit 6 / Parallel slave port bit 6 |
| Broche 30 | RD7/PSP7 — PORTD bit 7 / Parallel slave port bit 7 |
| Broche 31 | VSS — Ground reference |
| Broche 32 | VDD — Positive supply voltage |
| Broche 33 | RB0/INT — PORTB bit 0 / External interrupt |
| Broche 34 | RB1 — PORTB bit 1 |
| Broche 35 | RB2 — PORTB bit 2 |
| Broche 36 | RB3 — PORTB bit 3 |
| Broche 37 | RB4 — PORTB bit 4 |
| Broche 38 | RB5 — PORTB bit 5 |
| Broche 39 | RB6/PGC — PORTB bit 6 / In-circuit debugger clock |
| Broche 40 | RB7/PGD — PORTB bit 7 / In-circuit debugger data |
Applications typiques
PIC16C77-20/P convient pour 6 applications: Industrial Control Systems, Motor Control and Drive, Metering and Energy Measurement, Embedded Automation and PLC Modules, Low-Power Battery Monitoring, IoT Edge Devices and Sensor Hubs.
Industrial Control Systems
The PIC16C77-20/P fits industrial control with its 33 I/O lines at 25 mA sink/source directly driving relay coils, optocouplers, and indicator LEDs without external drivers, while the 8-channel 8-bit ADC reads 4-20 mA loop sensors and bridge outputs. The 200 ns instruction cycle at 20 MHz handles PID loops at sub-millisecond rates, and the wide 4.0-5.5 V supply tolerates 24 V industrial rail post-regulation. Unlike flash parts, the OTP memory locks firmware against field tampering in production equipment, and the 40-pin PDIP package simplifies through-hole prototyping for control panels.
Recommandé
Motor Control and Drive
The PIC16C77-20/P is suitable for DC and stepper motor control with its three timers generating complementary PWM signals at the 20 MHz clock, plus the 8-channel ADC sampling current-sense shunts and back-EMF feedback. The 368-byte RAM accommodates small state machines for trapezoidal commutation, and the USART enables Modbus RTU or RS-485 command interfaces. The 33 high-current I/O pins source MOSFET gate drivers directly without buffer stages. The PIC mid-range instruction set ensures deterministic interrupt latency for overcurrent protection loops critical in motor-drive safety.
Recommandé
Metering and Energy Measurement
The PIC16C77-20/P fits single-phase energy metering with its 8-bit ADC sampling current and voltage waveforms at sufficient resolution for class-1 meters when paired with anti-aliasing filters. The 20 MHz instruction rate performs RMS calculations and energy accumulation in real time, and the 14 KB OTP stores calibration tables and tariff logic. The SSP peripheral drives EEPROM or LCD displays for end-user readouts. The 40-pin PDIP simplifies field-serviceable meter designs where replaceable MCUs reduce service cost.
Recommandé
Embedded Automation and PLC Modules
The PIC16C77-20/P is a strong fit for PLC-style I/O modules with 33 I/O lines mapping directly to DIN-rail terminal blocks, plus USART for Modbus RTU slave communication. The 8-channel ADC reads analog sensor inputs (temperature, pressure, level) while the three timers handle pulse counting from flow meters or encoders. The wide supply voltage range to 6.0 V accommodates 24 V industrial rail post-regulation. OTP memory locks ladder-logic-equivalent firmware against unauthorized modification, and the through-hole PDIP package supports hand-rework in maintenance scenarios.
Recommandé
Low-Power Battery Monitoring
The PIC16C77-20/P suits battery-powered sensor nodes operating at 15 µA typical at 5 V/4 MHz with 1 µA standby at 3 V/32 kHz, allowing multi-year battery life on duty-cycled monitoring. The 8-channel ADC monitors cell voltages and temperatures, while the SSP peripheral interfaces to external sensors via I2C or SPI. The 33 I/O lines drive status LEDs and wake-up interrupts. The OTP memory locks power-management firmware, preventing field reprogramming that could compromise battery-life validation.
Recommandé
IoT Edge Devices and Sensor Hubs
The PIC16C77-20/P supports edge sensor aggregation with its 8-channel ADC and USART for upstream connectivity, plus SSP for local sensor networking via I2C or SPI. The 20 MHz clock rate runs lightweight TCP/IP stacks or Modbus gateways, and the 14 KB OTP stores fixed gateway firmware. The 33 I/O lines drive multiple sensor enables and indicator panels. The wide 4.0-5.5 V supply matches USB-powered and 5 V regulated rails typical in IoT gateways, while the 40-pin PDIP aids prototype iteration before reflow production.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16C77-20/P — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F77-I/P | PIC16F77-E/P | PIC16C77-10/P | PIC16C74B-20I/P |
|---|---|---|---|---|---|
| Package | 40-pin PDIP | 40-pin PDIP (same) | 40-pin PDIP (same) | 40-pin PDIP (same) | 40-pin PDIP (same) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 14 KB OTP | 14 KB Flash | 14 KB Flash | 14 KB OTP | 8 KB OTP |
| Clock Speed | 20 MHz | 20 MHz | 20 MHz | 10 MHz | 20 MHz |
| RAM | 368 bytes | 368 bytes | 368 bytes | 368 bytes | 192 bytes |
| I/O Pins | 33 | 33 | 33 | 33 | 33 |
| ADC | 8 channels, 8-bit | 8 channels, 8-bit | 8 channels, 8-bit | 8 channels, 8-bit | 8 channels, 8-bit |
| Temperature Range | Commercial (0C to +70C) | Industrial (-40C to +85C) | Extended (-40C to +125C) | Commercial (0C to +70C) | Industrial (-40C to +85C) |
| Reprogrammable | No (OTP) | Yes (Flash) | Yes (Flash) | No (OTP) | No (OTP) |
Principaux différenciateurs
- Larger 14 KB OTP program memory vs PIC16C76 (vs PIC16C76-20/P)
- Reprogrammability vs OTP lock (vs PIC16F77-I/P)
- Faster 20 MHz clock vs PIC16C77-04 (vs PIC16C77-04/P)
- Extended RAM vs PIC16C74B family (vs PIC16C74B-20I/P)
Notes de conception
Estimated: At VDD=5 V and 20 MHz active current ~10 mA, plus ADC ~1 mA and I/O sink ~50 mA worst-case, the PIC16C77-20/P can draw up to 60 mA from a regulated 5 V rail. Designers must budget the LDO/dropper to support this peak with a 100 nF ceramic decoupling capacitor placed within 5 mm of each VDD pin (pins 11 and 32), plus a bulk 10 µF tantalum or aluminum-polymer cap on the supply rail. Inductive loads driven directly from I/O require flyback diodes or external MOSFETs to limit back-EMF.
Layout for the PIC16C77-20/P must keep the OSC1/OSC2 traces short and surround the crystal with a ground pour to minimize EMI pickup. The MCLR pin (pin 1) requires a 10 kΩ pull-up to VDD and a 100 nF cap to ground for noise immunity; avoid leaving MCLR floating. The PGC/PGD pins (39, 40) need a 4.7 kΩ resistor in series for ICSP isolation if an external programmer shares the lines with application circuitry.
OTP memory cannot be electrically erased or reprogrammed; firmware bugs discovered after production are unfixable without a mask or package change. Always prototype with the flash-based PIC16F77 (same 40-pin PDIP pinout per Microchip pin compatibility chart 00148J2) and migrate to PIC16C77-20/P only after firmware is validated for production. Also note that the ADC reference pins (RA3/VREF+) must be decoupled with 100 nF + 10 µF and the ADC acquisition time must be configured per the datasheet's Tad parameter to avoid conversion errors.
Informations de conformité
Compliance information not provided in verified web data; RoHS and REACH status marked [DATA_NEEDED]. Microchip parts are generally RoHS compliant for current production, but legacy OTP parts may predate RoHS mandates.
