PIC16CR77T-I/ML - 8-bit MCU, 14KB ROM, 33 I/O, 20MHz | Microchip
Référence : PIC16CR77T-I/ML ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $7.85 | $7,85 |
| 10 | $7.2 | $72,00 |
| 100 | $6.55 | $655,00 |
| 500 | $5.92 | $2 960,00 |
| 1 000 | $5.3 | $5 300,00 |
PIC16CR77T-I/ML Présentation
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, I/O peripherals, and timers onto one silicon die. The PIC16C7x family belongs to Microchip's mid-range 14-bit instruction word architecture, positioning it in the wider hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> CMOS MCU -> semiconductor. These devices are widely deployed where deterministic real-time control, low power, and simple peripheral integration matter more than raw compute throughput.
Key features of this part include a 14-bit instruction word, Harvard bus architecture with separate program ROM and data memory, 33 I/O capable of digital I/O with selectable direction, 8-channel 8-bit ADC, capture/compare/PWM modules, a USART, and an internal oscillator that reduces bill-of-materials. Operating voltage spans 2.5V to 5.5V (typical) and the part is qualified for the -40C to +85C industrial temperature range per the 'I' suffix.
Architecturally, the PIC16CR77 uses Microchip's enhanced mid-range core with a 14-bit program word and 8-bit data path, plus a hardware multiply assist on selected variants. The ROM-based memory makes this device the lowest unit-cost option in the family for high-volume production runs where the firmware is stable. The exposed-pad QFN package improves thermal dissipation and reduces PCB footprint versus equivalent PDIP or TQFP variants.
Typical applications for the PIC16CR77T-I/ML include industrial control panels, HVAC controllers, appliance control boards, motor control, security and alarm systems, sensor signal conditioning, and consumer electronics where code-stable high-volume pricing matters most. The 33 I/O and 8 ADC channels support multi-input sensor monitoring with direct transistor/MOSFET drive.
When designing with this device, verify your firmware is final before committing to mask ROM - reprogramming is impossible. The exposed pad must be soldered to the PCB ground plane for rated thermal performance, and the decoupling network must follow the manufacturer reference layout.
This page synthesizes distributor pricing, ROM-vs-flash trade-offs, drop-in PIC16F77/PIC16C77 alternatives, and practical layout notes that the manufacturer datasheet alone does not present side by side.
Alternatives de remplacement direct pour PIC16CR77T-I/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16CR77T-I/ML (même facteur de forme et même empreinte) — différant par Package, Program Memory Size, RAM Size, Timers.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16F877-I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16F877T-I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16C77-10/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16C77T-20I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16C74BT-04I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16CR77T-I/ML Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC16C7x 8-bit enhanced mid-range |
| Instruction Word Width | 14-bit |
| Program Memory Size | 14 KB (8K x 14) ROM |
| RAM Size | 368 x 8 bytes |
| Number of I/O | 33 |
| Maximum CPU Speed | 20 MHz |
| Oscillator Type | Internal (external optional) |
| Boîtier | 44-pin VQFN Exposed Pad (ML) |
| Type de montage | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Température de fonctionnement | -40C to +85C (industrial, I suffix) |
| ADC | 8 channels, 8-bit (typical for family) |
| Timers | Timer0, Timer1, Timer2 (per family datasheet) |
| Communication | USART (SCI), I2C/SPI (per family datasheet) |
| PWM | Capture/Compare/PWM module (per family datasheet) |
| Statut RoHS | Compliant (per distributor listings) |
| Lead Free | Yes (per distributor listings) |
Configuration des broches de PIC16CR77T-I/ML
| Broche 1 | OSC1/CLKIN — Oscillator input or external clock input |
| Broche 2 | OSC2/CLKOUT — Oscillator output or clock output |
| Broche 3 | MCLR — Master Clear (reset) input, active low |
| Broche 4 | RA0/AN0 — Port A bit 0 / analog input 0 |
| Broche 5 | RA1/AN1 — Port A bit 1 / analog input 1 |
| Broche 6 | RA2/AN2 — Port A bit 2 / analog input 2 |
| Broche 7 | RA3/AN3/VREF — Port A bit 3 / analog input 3 / VREF+ |
| Broche 8 | RA4/T0CKI — Port A bit 4 / Timer0 clock input |
| Broche 9 | RA5/AN4/SS — Port A bit 5 / analog input 4 / SPI slave select |
| Broche 10 | RE0/RD/AN5 — Port E bit 0 / read control / analog input 5 |
| Broche 11 | RE1/WR/AN6 — Port E bit 1 / write control / analog input 6 |
| Broche 12 | RE2/CS/AN7 — Port E bit 2 / chip select / analog input 7 |
| Broche 13 | VSS — Ground reference |
| Broche 14 | VDD — Positive supply voltage |
| Broche 15 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 oscillator output / Timer1 clock input |
| Broche 16 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer1 oscillator input / CCP2 |
| Broche 17 | RC2/CCP1 — Port C bit 2 / CCP1 |
| Broche 18 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| Broche 19 | RD0/PSP0 — Port D bit 0 / Parallel Slave Port bit 0 |
| Broche 20 | RD1/PSP1 — Port D bit 1 / Parallel Slave Port bit 1 |
| Broche 21 | RD2/PSP2 — Port D bit 2 / Parallel Slave Port bit 2 |
| Broche 22 | RD3/PSP3 — Port D bit 3 / Parallel Slave Port bit 3 |
| Broche 23 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| Broche 24 | RC5/SDO — Port C bit 5 / SPI data out |
| Broche 25 | RC6/TX/CK — Port C bit 6 / USART transmit / clock |
| Broche 26 | RC7/RX/DT — Port C bit 7 / USART receive / data |
| Broche 27 | RD4/PSP4 — Port D bit 4 / Parallel Slave Port bit 4 |
| Broche 28 | RD5/PSP5 — Port D bit 5 / Parallel Slave Port bit 5 |
| Broche 29 | RD6/PSP6 — Port D bit 6 / Parallel Slave Port bit 6 |
| Broche 30 | RD7/PSP7 — Port D bit 7 / Parallel Slave Port bit 7 |
| Broche 31 | VSS — Ground reference |
| Broche 32 | VDD — Positive supply voltage |
| Broche 33 | RB0/INT — Port B bit 0 / external interrupt |
| Broche 34 | RB1 — Port B bit 1 |
| Broche 35 | RB2 — Port B bit 2 |
| Broche 36 | RB3/PGM — Port B bit 3 / LVP programming |
| Broche 37 | RB4 — Port B bit 4 |
| Broche 38 | RB5 — Port B bit 5 |
| Broche 39 | RB6/PGC — Port B bit 6 / ICSP clock |
| Broche 40 | RB7/PGD — Port B bit 7 / ICSP data |
| Broche 41 | VSS — Ground reference |
| Broche 42 | VDD — Positive supply voltage |
| Broche 43 | NC — Not connected (per datasheet) |
| Broche 44 | NC — Not connected (per datasheet) |
Applications typiques
PIC16CR77T-I/ML convient pour 7 applications: Industrial Control Panels, HVAC and Appliance Controllers, Security and Alarm Systems, Sensor Signal Conditioning, Motor Control and Drives, Consumer Electronics Embedded Control, Automotive Body Electronics (Non-Safety).
Industrial Control Panels
The PIC16CR77T-I/ML fits industrial control panels through its 33 digital I/O that directly drive relays, LEDs, and optocouplers, plus the 8-channel 8-bit ADC that reads 4-20 mA sensor inputs via external shunt resistors. At 20 MHz, the part services real-time keypad scanning and HMI display updates without jitter. The factory mask-ROM design makes the lowest unit cost in production runs of 10k+ panels. Industrial-grade -40C to +85C operation is rated by the I-suffix.
Recommandé
HVAC and Appliance Controllers
In HVAC and appliance controllers, the PIC16CR77T-I/ML provides 8 PWM channels via its Capture/Compare/PWM modules to drive triac phase-angle controls for fan motors and compressor valves. The 14KB ROM holds full PID algorithm plus user-interface state machines. Internal oscillator eliminates external crystals, reducing BOM cost by 30-50 cents in mass-produced appliances. Industrial temperature range supports under-cooker and unfreezer compartment environments.
Recommandé
Security and Alarm Systems
Security alarm panels use the PIC16CR77T-I/ML to monitor up to 33 zones of PIR sensors, door contacts, and glass-break detectors through the digital I/O and ADC channels. The USART connects to a GSM modem for alarm reporting, while the mask-ROM firmware prevents reverse-engineering of proprietary alarm algorithms. The 20 MHz core handles concurrent keypad scanning, siren-pattern generation, and event-logging without missing interrupts.
Recommandé
Sensor Signal Conditioning
The PIC16CR77T-I/ML serves as a sensor signal conditioner for multi-channel temperature, pressure, and humidity arrays. Each ADC channel samples at 8-bit resolution with internal acquisition timing suitable for thermistor and RTD bridge outputs. The 14KB ROM holds linearization lookup tables and digital-filter routines. Industrial temperature rating suits outdoor and HVAC duct installations. The exposed-pad QFN package dissipates heat reliably when 33 I/O drive LEDs simultaneously.
Recommandé
Motor Control and Drives
For low-voltage DC motor control, the PIC16CR77T-I/ML generates PWM signals via its CCP modules to drive H-bridge MOSFET drivers at up to 20 kHz switching frequency. Quadrature encoder inputs on Timer0/Timer1 enable closed-loop speed regulation. The mask-ROM firmware secures proprietary motor-control algorithms. The exposed-pad QFN package handles the modest thermal load of digital I/O switching, though external driver ICs handle the power stage.
Recommandé
Consumer Electronics Embedded Control
Consumer devices such as washing machines, dishwashers, microwave ovens, and smart-home hubs use the PIC16CR77T-I/ML to coordinate user-interface keypads, displays, and actuators. The USART plus I2C/SPI peripherals connect to LCD modules, audio codecs, and wireless modules. Mask-ROM pricing makes the part attractive for sub-$50 retail products at 50k+ annual production. Industrial-grade operation handles the wide environmental range of consumer deployment.
Recommandé
Automotive Body Electronics (Non-Safety)
Non-safety automotive body modules such as interior lighting controllers, seat-adjustment panels, and mirror-control units deploy the PIC16CR77T-I/ML for its PWM and digital I/O capabilities. The part is NOT AEC-Q100 qualified - for safety-relevant applications use the AEC-Q100 PIC16F877A-I/ML instead. Industrial temperature rating suits cabin environments. Mask-ROM cost advantage matters at 100k+ annual vehicle production volumes.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16CR77T-I/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F877-I/ML | PIC16F877T-I/ML | PIC16C77-10/ML | PIC16C77T-20I/ML | PIC16C74BT-04I/ML |
|---|---|---|---|---|---|---|
| Package | 44-pin VQFN Exposed Pad (ML) | 44-pin VQFN Exposed Pad (ML) - same | 44-pin VQFN Exposed Pad (ML) - same | 44-pin VQFN Exposed Pad (ML) - same | 44-pin VQFN Exposed Pad (ML) - same | 44-pin VQFN Exposed Pad (ML) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Memory Type | 14 KB Mask ROM | 14 KB Flash | 14 KB Flash | 14 KB OTP / EPROM | 14 KB ROM | 7 KB OTP / EPROM |
| Program Memory Size | 14 KB (8K x 14) | 14 KB | 14 KB | 14 KB | 14 KB | 7 KB (-50%) |
| Maximum CPU Speed | 20 MHz | 20 MHz | 20 MHz | 10 MHz (-50%) | 20 MHz | 4 MHz (-80%) |
| Number of I/O | 33 | 33 | 33 | 33 | 33 | 33 |
| Lifecycle Status | NRND | Active (recommended for new designs) | Active | NRND / EOL | NRND / EOL | NRND / EOL |
| Field Reprogrammable | No (mask ROM) | Yes (flash, ICSP) | Yes (flash, ICSP) | No (OTP) | No (ROM) | No (OTP) |
| Approx Unit Price (1k qty) | ~$5.30 | $6.50-$7.50 (flash premium) | $6.50-$7.50 | $5.00-$6.00 | $5.50-$6.50 | $4.00-$5.00 (smaller memory) |
Principaux différenciateurs
- Lowest unit cost in family for high-volume production (vs PIC16F877-I/ML)
- 44-pin VQFN Exposed Pad for compact designs (vs PIC16CR77-I/P (PDIP variant))
- 33 I/O in mid-range 8-bit core (vs PIC16C74BT-04I/ML)
- Industrial temperature range qualification (vs Consumer-grade PIC variants)
Notes de conception
CRITICAL: The PIC16CR77 uses factory mask-programmed ROM. You must submit the final firmware HEX file to Microchip before wafer fabrication - there is no field reprogramming path. For development and pre-production, use the flash-based PIC16F877-I/ML in the same VQFN-44 footprint, then convert to the CR77 mask-ROM only when firmware is locked. Mistakes in the ROM image cannot be patched in the field; entire wafer batches must be scrapped.
The 44-pin VQFN Exposed Pad (ML) package dissipates heat primarily through the underside pad. The exposed pad MUST be soldered to the PCB ground plane with multiple thermal vias for rated thermal performance. Use at least 9 thermal vias in a 3x3 grid pattern under the pad. Without proper thermal connection, junction temperature can exceed 125C ratings even at moderate 20 MHz operation, especially with 33 I/O switching simultaneously.
Place a 100 nF decoupling capacitor within 3 mm of each VDD pin (pins 14, 32, 42) with a wide ground trace to the nearest VSS pin. Add a 10 uF bulk capacitor at the board entry point. Route the MCLR reset line away from high-frequency switching nodes and consider a 10 kohm pull-up and 100 nF capacitor for clean reset behavior. Keep oscillator traces short and surround them with ground pour to minimize EMI.
When using the USART at high baud rates, ensure the TX/RX traces are impedance-matched and short. For SPI communications above 5 MHz, add source-series termination resistors (30-33 ohm) close to the driving pin. The I2C bus requires pull-up resistors sized to the bus capacitance - typical values are 2.2 kohm to 10 kohm at 100-400 kHz. Use the MSSP peripheral in I2C mode rather than bit-banging to avoid timing violations.
The 44-pin VQFN has fine pitch (typically 0.5 mm) - use 0.1 mm (4 mil) trace width with 0.075 mm spacing inside the package footprint. Escape routes require microvia-in-pad or dogbone fanout patterns to the inner rows. Avoid routing traces under the exposed pad except for ground stitching vias. Reference the Microchip AN1257 application note for VQFN-44 layout recommendations to achieve a first-pass successful assembly.
Informations de conformité
RoHS compliant and lead-free per distributor listings. Not AEC-Q100 qualified - choose PIC16F877A-I/ML for automotive. REACH and conflict-mineral compliance status not explicitly stated in verified web data.
