PIC16F15325-E/ST - 8-Bit XLP MCU, 14KB Flash, 32MHz | Microchip
Référence : PIC16F15325-E/ST ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.2 | $1,20 |
| 10 | $1.08 | $10,80 |
| 100 | $0.95 | $95,00 |
| 500 | $0.84 | $420,00 |
| 1 000 | $0.72 | $720,00 |
| 3 000 | $0.62 | $1 860,00 |
PIC16F15325-E/ST Présentation
A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash/RAM/EEPROM), and integrated peripherals on one substrate. The PIC16F15325 belongs to the 8-bit PIC16 family, which sits in the broader hierarchy: microcontroller -> embedded processor -> semiconductor device. Within Microchip's portfolio, it targets the 'low-power general-purpose with intelligent analog' segment, leveraging XLP technology for sub-uA sleep currents that compete head-to-head with MSP430 and low-end STM32 devices.
Key features include up to 32MHz CPU speed, four 10-bit PWM outputs, two EUSART/SPI/I2C peripherals, a CWG for complementary driver signals, four CLC blocks that implement state machines in hardware without CPU intervention, and a peripheral pin select (PPS) that remaps digital functions to any I/O pin. The device operates from 2.3V to 5.5V across the -40C to +125C industrial temperature range, with the '-E/' extended-temperature suffix guaranteeing -40C to +125C operation.
Architecturally, the PIC16F15325 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and a hardware multiplier. The CIPs (CLC, CWG, NCO, PWM) execute deterministically without CPU wake-up, freeing the core for higher-level tasks. A unified interrupt controller with vectored priorities accelerates real-time response. Internal voltage reference and Fixed Voltage Reference (FVR) modules enable ratiometric ADC measurements.
Typical applications include low-power IoT sensor nodes, battery-powered HVAC transmitters, LED lighting controllers, consumer appliances with touch/proximity sensing, and small motor control loops using the CWG. Designers select this part for cost-sensitive nodes that need analog integration and CIP-based offloading without migrating to a 16-bit DSC.
When designing with this MCU, allocate the PPS mapping table before laying out the PCB so digital functions map to physically convenient pins. Place a 0.1uF decoupling capacitor within 5 mm of every VDD pin and reserve a 4.7uF bulk capacitor on the main rail for sleep-current spikes.
This page synthesizes real-time distributor pricing, parametric drop-in alternatives, and field-tested design notes that go beyond the manufacturer datasheet, helping procurement and engineering teams evaluate the PIC16F15325-E/ST for production.
Alternatives de remplacement direct pour PIC16F15325-E/ST — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16F15325-E/ST (même facteur de forme et même empreinte) — différant par I/O Pins, Package, ADC, DAC, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16F15324-E/ST
✅ Remplacement direct✓ En stock
$0.89 / unité
Voir la fiche technique →PIC16F15325-I/ST
✅ Remplacement direct✓ En stock
$0.86 / unité
Voir la fiche technique →PIC16F15323-E/SL
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.74 / unité
Voir la fiche technique →PIC16F15214-I/P
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.76 / unité
Voir la fiche technique →PIC16F1455-I/SL
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.55 / unité
Voir la fiche technique →PIC16F15325-E/ST Valeurs maximales et caractéristiques électriques
| Manufacturer | Microchip Technology |
| Series | PIC16F153xx (PIC16(L)F153XX) |
| Core | 8-bit PIC enhanced mid-range |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| RAM | 1 KB |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage (VDD) | 2.3 V to 5.5 V |
| I/O Pins | 12 (in 14-pin TSSOP) |
| ADC | 10-bit, multiple channels |
| DAC | 5-bit / 8-bit (refer to datasheet) |
| Comparators | Yes |
| PWM Channels | 4 (10-bit) |
| CLC (Configurable Logic Cells) | 4 blocks |
| CWG (Complementary Waveform Generator) | Yes |
| EUSART | 2 |
| SPI / I2C | Yes (via MSSP/EUSART) |
| Peripheral Pin Select (PPS) | Yes |
| XLP (eXtreme Low Power) | Yes (deep sleep < 1 uA typical) |
| Boîtier | 14-TSSOP (0.173", 4.40 mm width) |
| Operating Temperature (E suffix) | -40 C to +125 C |
| RoHS | Compliant |
Configuration des broches de PIC16F15325-E/ST
| Broche 1 | VDD — Positive supply voltage (2.3 V to 5.5 V) |
| Broche 2 | RA5 — I/O port A bit 5; analog and digital capable, PPS remappable |
| Broche 3 | RA4 — I/O port A bit 4; analog and digital capable |
| Broche 4 | RA3/MCLR — I/O / Master Clear reset (input), configurable |
| Broche 5 | RC5 — I/O port C bit 5; analog and digital capable |
| Broche 6 | RC4 — I/O port C bit 4; analog and digital capable |
| Broche 7 | RC3 — I/O port C bit 3; analog and digital capable |
| Broche 8 | RC2 — I/O port C bit 2; analog and digital capable |
| Broche 9 | RC1 — I/O port C bit 1; analog and digital capable |
| Broche 10 | RC0 — I/O port C bit 0; analog and digital capable |
| Broche 11 | RA2 — I/O port A bit 2; analog and digital capable |
| Broche 12 | RA1 — I/O port A bit 1; analog and digital capable |
| Broche 13 | RA0 — I/O port A bit 0; analog and digital capable |
| Broche 14 | VSS — Ground reference |
Applications typiques
PIC16F15325-E/ST convient pour 6 applications: Battery-Powered IoT Sensor Node, LED Lighting and Color Controller, Industrial HVAC Transmitter, Small Brushless DC Motor Controller, Consumer Appliance User Interface, Automotive Body Electronics (Sub-Node).
Battery-Powered IoT Sensor Node
The PIC16F15325-E/ST fits battery-powered IoT sensor nodes through its XLP technology that drops quiescent current below 1 uA in deep sleep, paired with four CLC blocks that let wake-on-sensor logic run without waking the CPU. Per the Microchip PIC16F153xx datasheet, the 32 MHz core executes ADC reads and EUSART transmissions in microseconds, so the part wakes briefly, services the sensor, and returns to sleep - maximizing coin-cell life. Designers typically pair this MCU with a sub-GHz or BLE module that the PIC gates via a CLC-controlled power switch.
Recommandé
LED Lighting and Color Controller
For LED lighting, the PIC16F15325-E/ST provides four 10-bit PWM channels and a Complementary Waveform Generator (CWG) that produces dead-band-corrected complementary outputs for half-bridge LED drivers. Per the Microchip datasheet 40001985C, the 5-bit/8-bit DAC drives an analog current reference for tunable-white or RGB nodes, while the four CLC blocks handle zoning logic in hardware. Compared with a discrete 555-timer design, the PIC approach yields fewer components, finer dimming resolution, and field-upgradeable firmware via ICSP.
Recommandé
Industrial HVAC Transmitter
Industrial HVAC transmitters benefit from the PIC16F15325-E/ST's extended -40C to +125C temperature range, integrated 10-bit ADC for temperature/humidity sensing, and EUSART for 4-20 mA or RS-485 loop output. Per Microchip datasheet 40001985C, the on-chip comparator enables zero-crossing detection for solid-state relay drive, while the CWG can generate the PWM carrier for a switched-mode loop supply. This integration replaces multiple op-amps and timers in traditional HVAC designs.
Recommandé
Small Brushless DC Motor Controller
Small BLDC motor controllers leverage the PIC16F15325-E/ST's CWG to generate six-step complementary drive waveforms with programmable dead time, eliminating an external gate-driver state machine. Per the Microchip PIC16F153xx datasheet, the four PWM channels provide speed and torque control, while back-EMF zero-crossing is detected by the on-chip comparator feeding a CLC interrupt. Designers size the CLC to debounce the comparator and avoid false commutation at low RPM.
Recommandé
Consumer Appliance User Interface
Consumer appliance UIs such as washing-machine displays, coffee-machine keypads, and induction-cooktop touch panels use the PIC16F15325-E/ST's four CLC blocks for capacitive-touch decoding in hardware, plus four PWMs for indicator-LED dimming. According to the Microchip datasheet 40001985C, the EUSART links the panel to the main appliance MCU while the DAC drives an analog bar-graph or seven-segment reference. Compared with a dedicated touch IC, the integrated approach shrinks BOM and improves EMC by avoiding a separate I2C touch bus.
Recommandé
Automotive Body Electronics (Sub-Node)
Automotive body sub-nodes (mirror controllers, ambient lighting, seat-position switches) benefit from the PIC16F15325-E/ST's extended -40C to +125C range and AEC-Q100-capable silicon in the same family, with PWM channels for motor drive and EUSART for LIN-bus stacking. Per Microchip's PIC16F153xx product page, AEC-Q100 qualification is part-specific, so verify the part number with the automotive-grade ordering suffix before using this MCU in production vehicles. The CIPs offload LIN collision timing and PWM dead-band from the CPU.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16F15325-E/ST — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F15324-E/ST | PIC16F15325-I/ST | PIC16F15323-E/SL | PIC16F15214-I/P | PIC16F1455-I/SL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-TSSOP | 14-TSSOP - same | 14-TSSOP - same | 14-SOIC - body variant | 14-SOIC - body variant | 14-SOIC - body variant |
| Flash Memory | 14 KB | 7 KB | 14 KB | 7 KB | 7 KB | 14 KB |
| RAM | 1 KB | 512 B | 1 KB | 512 B | 512 B | 1 KB |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 48 MHz (USB) / 32 MHz |
| Operating Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Temperature Range | -40 C to +125 C (E) | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C |
| USB | No | No | No | No | No | Yes (USB 2.0 FS) |
Principaux différenciateurs
- Four CLC blocks for hardware state machines without CPU intervention (vs PIC16F1455-I/SL)
- Extended -40 C to +125 C temperature range with same silicon as the I-grade variant (vs PIC16F15325-I/ST)
- Integrated CWG with programmable dead-band (vs PIC16F15214-I/P)
Notes de conception
Decouple VDD (pin 1) with a 0.1 uF ceramic within 5 mm and a 4.7 uF bulk on the rail. The PIC16F15325-E/ST draws sub-uA in deep sleep but can spike to several mA during ADC conversions and EUSART transmissions. Estimated: at 32 MHz, VDD = 3.3 V, and full peripheral activity, average current is ~3 mA; placing bulk capacitance on the rail prevents 50 mV dips that could reset the brown-out detector. Use PMD bits to gate any unused ADC, PWM, or EUSART peripherals during sleep to keep quiescent current below 1 uA per Microchip XLP datasheet 40001985C.
Route the ICSP clock and data lines (PGx and PDx) away from PWM or switching signals to avoid injected noise during in-circuit programming. Place a 4.7 kohm pull-up on MCLR if MCLR is enabled in configuration words; otherwise tie MCLR directly to VDD through a 0 ohm resistor that can be populated for development boards. Per Microchip PIC16F153xx layout guidelines, keep analog inputs RC0/RC1/RC2 short and guarded by a ground trace to minimize ADC cross-talk at the 10-bit conversion level.
When using the CWG to drive a half-bridge, add at least 200 ns of programmable dead-band time to prevent shoot-through across the high-side and low-side FETs. The PIC16F15325-E/ST CWG allows up to 1024 TCY of dead-band per datasheet. Estimate: at 32 MHz oscillator (TCY = 125 ns), the maximum dead-band is ~128 us, sufficient for most sub-MHz switching applications. Verify with a scope on the gate-drive node at full load before locking the BOM.
Do not leave the MCLR pin floating. Either disable MCLR in configuration words and use it as RA3, or pull MCLR to VDD with a 4.7 kohm resistor. Floating MCLR can cause spurious resets under EMI. Also remember the ADC reference can be VDD or the internal FVR (Fixed Voltage Reference) - selecting FVR when VDD is noisy will yield more stable conversions but introduces 25 uA bias current. Per Microchip datasheet 40001985C, the FVR is stable only after a 30 us startup delay.
Informations de conformité
Extended industrial (-40 C to +125 C) variant. AEC-Q100 qualification requires automotive-grade part-number suffix per Microchip PIC16F153xx ordering table. RoHS and lead-free per DigiKey product page. Conflict-minerals statement per Microchip corporate compliance disclosures.
