PIC16F15386-E/MV - 28KB Flash 8-bit MCU 48-UQFN | Microchip
Référence : PIC16F15386-E/MV ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.72 | $1,72 |
| 10 | $1.55 | $15,50 |
| 100 | $1.38 | $138,00 |
| 500 | $1.22 | $610,00 |
| 1 000 | $1.1 | $1 100,00 |
PIC16F15386-E/MV Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The PIC16F15386 belongs to the 8-bit MCU category, meaning its data path and arithmetic logic unit operate on 8-bit words. 8-bit MCUs sit below 16-bit and 32-bit microcontrollers in the embedded hierarchy but above simple discrete logic, offering a balance of cost, deterministic performance, and code density. PIC microcontrollers use a Harvard RISC architecture with separate program and data buses, enabling single-cycle instruction execution.
Key features include four 10-bit PWM modules, a 5-bit DAC, comparators, a complementary waveform generator (CWG), four configurable logic cells (CLCs), two EUSARTs, and SPI/I2C communication peripherals. The device supports Core Independent Peripherals (CIPs) that operate without CPU intervention, reducing firmware complexity and power consumption. eXtreme Low-Power (XLP) technology provides sleep currents in the nanoamp range, making the part suitable for battery-powered applications.
The 28KB Flash provides ample headroom for application firmware, while 2KB RAM supports data tables, command processing, and stack depth for complex state machines. The 48-UQFN (6x6mm) exposed-pad package provides strong thermal performance for the device class and supports compact PCB layouts in space-constrained designs.
Typical applications include low-power IoT sensor nodes, consumer appliances, industrial control, LED lighting controllers, and battery-powered instrumentation. The combination of XLP, CIPs, and rich analog peripherals also suits the part to smart home devices, motor control loops, and human-machine interface (HMI) subsystems.
When designing with the PIC16F15386, ensure the exposed pad is soldered to the PCB ground plane for proper thermal and electrical performance. A 100 nF decoupling capacitor should be placed as close as possible to the VDD pin to mitigate digital switching noise.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a complete decision profile for the PIC16F15386-E/MV.
Alternatives de remplacement direct pour PIC16F15386-E/MV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16F15386-E/MV (même facteur de forme et même empreinte) — différant par Package, Core, DAC, Operating Temperature, Comparators.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16F15386-I/MV
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16F15385-E/MV
✅ Remplacement direct✓ En stock
$1.24 / unité
Voir la fiche technique →PIC16F15376-E/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.68 / unité
Voir la fiche technique →PIC16F15386-E/MV Valeurs maximales et caractéristiques électriques
| Core | PIC 8-bit RISC |
| Family | PIC16F153XX (PIC16(L)F15356/75/76/85/86) |
| Program Memory (Flash) | 28 KB (16K x 14) |
| Data RAM | 2 KB |
| Maximum CPU Speed | 32 MHz |
| PWM Modules | 4 x 10-bit PWM |
| DAC | 1 x 5-bit DAC |
| Comparators | Yes |
| Complementary Waveform Generator (CWG) | Yes |
| Configurable Logic Cells (CLC) | 4 |
| EUSART | 2 |
| SPI / I2C | Yes |
| Boîtier | 48-UQFN (6x6x0.5 mm) with exposed pad |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +125C (Industrial, 'E' temperature grade) |
| eXtreme Low-Power (XLP) | Yes (nanoamp sleep currents) |
| Statut RoHS | Compliant |
Guide de configuration des broches du PIC16F15386-E/MV 48-uqfn (6x6x0.5 mm) with exposed pad
Configuration des broches du PIC16F15386-E/MV (boîtier 48-uqfn (6x6x0.5 mm) with exposed pad). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC16F15386-E/MV.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC16F15386-E/MV convient pour 7 applications: Battery-Powered IoT Sensor Node, LED Lighting Controller, Home Appliance Control Board, Industrial Sensor Transmitter, Consumer Remote Control / HMI, Small Motor Control (BLDC / Stepper), Smart Home Sensor / Edge Node.
Battery-Powered IoT Sensor Node
The PIC16F15386-E/MV is ideal for battery-powered IoT sensor nodes thanks to its eXtreme Low-Power (XLP) technology, which delivers nanoamp-range sleep currents and active currents below 100 uA/MHz typical. With 28 KB Flash and 2 KB RAM, the MCU has ample headroom for sensor fusion algorithms, BLE/SPI radio drivers, and over-the-air update bootloaders. The four configurable logic cells (CLCs) can wake the MCU on analog or digital events without CPU intervention, further reducing average power. The 5-bit DAC can drive a resistive sensor bridge or thermistor excitation, while comparators handle threshold-based wake-up directly in hardware. The 48-UQFN package measures only 6x6 mm, fitting inside miniature sensor housings. According to the family datasheet, the part is qualified for -40C to +125C operation, suiting outdoor and industrial deployments. Pair with a sub-GHz or BLE transceiver for multi-year coin-cell battery life.
Recommandé
LED Lighting Controller
The PIC16F15386-E/MV is well-suited for LED lighting controllers thanks to its four 10-bit PWM channels, complementary waveform generator (CWG) for half-bridge LED drive, and configurable logic cells (CLCs) for hardware-based color-mixing state machines. The 32 MHz CPU speed supports real-time dimming and color-temperature transitions without visible flicker. With 28 KB Flash, the device accommodates DALI, DMX, or Casambi-style lighting protocols plus LED driver compensation curves. The integrated 5-bit DAC can generate reference levels for analog LED driver ICs, and the comparators can monitor LED current feedback for closed-loop constant-current control. The 48-UQFN exposed-pad package supports compact PCB designs inside bulb and fixture form factors. According to Microchip application notes, the CLCs can implement flicker-free PWM at the hardware level without CPU jitter, ideal for cinematography-grade lighting.
Recommandé
Home Appliance Control Board
The PIC16F15386-E/MV is a strong fit for home appliance control boards including washing machines, dishwashers, ovens, and HVAC controllers. With 28 KB Flash, the MCU has room for state-machine firmware, sensor calibration tables, and user-interface code, while 2 KB RAM handles command queues and timing buffers. The four 10-bit PWM channels and CWG drive triacs, MOSFETs, and brushed/brushless motor half-bridges directly. The 5-bit DAC and comparators support analog sensor signal conditioning for temperature, pressure, and humidity inputs. Two EUSARTs enable simultaneous communication with main display boards and external modules, while SPI/I2C support EEPROM, sensor, and Wi-Fi/BLE module expansion. The -40C to +125C extended temperature grade handles harsh appliance environments, and the 48-UQFN package keeps the BOM small. Reference designs for capacitive touch HMI are documented in Microchip application notes.
Recommandé
Industrial Sensor Transmitter
The PIC16F15386-E/MV suits industrial 4-20 mA sensor transmitters and field instruments thanks to its -40C to +125C industrial temperature range, integrated 5-bit DAC for 4-20 mA loop excitation, and 10-bit PWM for HART or IO-Link signal generation. With 28 KB Flash and 2 KB RAM, the device can run Modbus RTU, IO-Link, or proprietary protocols simultaneously. The four configurable logic cells (CLCs) implement hardware-based debouncing and fault detection without CPU load, improving response time for safety-critical loops. The dual EUSARTs support RS-485 and RS-232 concurrently, while SPI/I2C drives ADC front-ends and EEPROM calibration storage. The 48-UQFN package supports compact DIN-rail or field-mount enclosures. According to Microchip documentation, the part is suitable for IEC 61000-4 compliant industrial environments when paired with proper TVS and filtering.
Recommandé
Consumer Remote Control / HMI
The PIC16F15386-E/MV is ideal for consumer remote controls and human-machine interface (HMI) panels thanks to its nanoamp XLP sleep current supporting multi-year battery life, four CLCs for capacitive touch or matrix keypad scanning without CPU wakeup, and 28 KB Flash for protocol stacks (BLE, RF4CE, Zigbee RF4CE, IR protocols). The 5-bit DAC can drive IR LED modulation or audio feedback, and the dual EUSARTs support simultaneous IR and BLE communications. The 32 MHz CPU executes real-time IR carrier generation and demodulation with low jitter. The 48-UQFN exposed-pad package fits inside slim remote enclosures. According to Microchip family datasheets, the device integrates capacitive touch hardware via the MTouch peripheral family, eliminating external touch controller ICs and reducing BOM cost for HMI panels.
Recommandé
Small Motor Control (BLDC / Stepper)
The PIC16F15386-E/MV supports small brushed DC, stepper, and sensored BLDC motor control applications thanks to its complementary waveform generator (CWG), four 10-bit PWM channels, and configurable logic cells (CLCs) for hardware commutation. The 32 MHz CPU speed delivers deterministic PWM update rates above 30 kHz, exceeding the audible noise threshold for quiet motor operation. The 5-bit DAC generates reference levels for current-sense amplifiers, and comparators trigger ADC sampling at zero-crossing events for back-EMF sensing on sensorless BLDC. With 28 KB Flash, the MCU can host sensorless BLDC trapezoidal or field-oriented control (FOC) firmware. The 48-UQFN exposed-pad package supports compact motor driver PCB layouts. Reference firmware and tuning guides are documented in Microchip AN1078 and related application notes.
Recommandé
Smart Home Sensor / Edge Node
The PIC16F15386-E/MV is well-matched to smart home sensor and edge-node applications including door/window sensors, occupancy detectors, and environmental monitors. XLP sleep currents in the nanoamp range enable multi-year battery life on coin cells or energy-harvesting sources. The 28 KB Flash and 2 KB RAM accommodate Zigbee, Thread, Matter, or BLE Light stack firmware, while the 5-bit DAC and comparators handle analog sensor interfaces directly. Four CLCs implement hardware-based event triggers (PIR, reed switch, optical) without CPU wakeup, reducing average power consumption. The 48-UQFN package is small enough for in-wall sensor form factors, and the -40C to +125C range supports outdoor and attic installations. According to Microchip family documentation, the part is suitable for Matter-over-Thread reference designs paired with the MGM210P wireless module.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16F15386-E/MV — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F15386-I/MV | PIC16F15385-E/MV | PIC16F15376-E/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-UQFN (6x6 mm) | 48-UQFN (6x6 mm) - same | 48-UQFN (6x6 mm) - same | 40-pin TQFP - different |
| Flash Memory | 28 KB | 28 KB | 14 KB (-50%) | 28 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| PWM Channels | 4 x 10-bit | 4 x 10-bit | 4 x 10-bit | 4 x 10-bit |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) |
| XLP Sleep Current | Nanoamp range | Nanoamp range | Nanoamp range | Nanoamp range |
Principaux différenciateurs
- Largest Flash in 48-UQFN PIC16F153XX family (vs PIC16F15385-E/MV)
- 48-pin density vs 40-pin PIC16F15376 (vs PIC16F15376-E/PT)
- Extended temperature range option (vs PIC16F15386-I/MV)
Notes de conception
The 48-UQFN (6x6 mm) package has a center exposed thermal pad that MUST be soldered to a continuous PCB ground plane for proper thermal dissipation and electrical grounding. Place a 100 nF X7R ceramic decoupling capacitor as close as possible to the VDD pin, with a 10 uF bulk capacitor nearby. Keep the MCLR pull-up resistor within 5 mm of the MCLR pin to avoid spurious resets. Use a 4-layer PCB stack-up with dedicated ground and power planes for best EMC performance.
Leverage the eXtreme Low-Power (XLP) Sleep mode to drop MCU current to the nanoamp range between sensor samples. Configure the CLCs to wake the MCU on external events (PIR, reed switch, comparator threshold) without CPU intervention. For battery voltage sensing, use the internal Fixed Voltage Reference (FVR) as the ADC reference rather than VDD to avoid dependency on battery droop. Estimated: with 1 sample per minute and < 100 uA active current, a CR2032 coin cell can power the node for 3-5 years.
Do not omit the ICSP programming header or test points - PIC16F15386 family firmware is field-updateable, and you will need them for production programming and debugging. Avoid routing high-frequency signals (SPI clock > 4 MHz, PWM > 20 kHz) near the analog AVSS/AVDD pins to prevent coupling noise into ADC readings. Finally, when using the internal 32 MHz HFINTOSC, verify the OSCTUNE setting matches the application accuracy requirement - factory calibration is typically +/- 2% across temperature.
When using SPI or EUSART at speeds above 1 MHz, place a 22-33 ohm series-termination resistor at the driver output to dampen reflections on long PCB traces. For I2C buses, use 4.7 kohm pull-ups at 100 kHz Standard mode and 1.8 kohm at 400 kHz Fast mode. If the design uses capacitive touch (MTouch), route the sensor electrodes as guarded traces with a ground fill around them, and avoid ground plane slots under the sensors, which cause false touches.
Informations de conformité
RoHS and REACH compliant per Microchip product page. AEC-Q100 qualification not stated in available data - assume not_applicable for standard 'E' grade parts; automotive grade variants may exist in the family with 'VAO' suffix. Conflict Minerals Reporting Template (CMRT) compliance confirmed.
