Microchip Technology

PIC16F723-I/SS - 20MHz 8-Bit 7KB Flash MCU | Microchip

Référence : PIC16F723-I/SS ✓ Actif
28-pin SSOP Package 20 MHz Speed 7 KB (4K × 14 words) Memory
MOQ : 1 |

PIC16F723-I/SS Présentation

The Microchip Technology PIC16F723-I/SS is an 8-bit PIC RISC flash microcontroller with a maximum clock speed of 20 MHz, 7 KB of flash program memory organized as 4K × 14 words, and a 28-pin small-outline package. It belongs to Microchip's extreme-low-power MCU family with nanoWatt XLP technology, making it suitable for compact embedded products that require low-power operation, fast execution, and a compact footprint.

An 8-bit microcontroller is a complete programmable control platform integrating a processor core, flash memory, RAM, oscillators, timers, communication peripherals, and general-purpose I/O into one device. Within the embedded-control hierarchy, the PIC16F723-I/SS belongs to the PIC16 family of flash-based microcontrollers and the broader category of microcontrollers, microprocessors, and semiconductors. Its combination of 20 MHz operation and nanoWatt XLP technology supports both responsive control loops and duty-cycled battery-powered designs.

Key device characteristics include a maximum operating frequency of 20 MHz, 7 KB of internal flash, a 28-pin SSOP package, an industrial temperature range of -40°C to +85°C, and an integrated 16 MHz internal oscillator. The -I temperature designation supports operation across that industrial range, while the /SS package suffix identifies the 28-pin small-outline package used for compact PCB layouts.

The PIC16F723 uses Microchip's 14-bit PIC architecture and combines flash program memory with integrated peripherals for embedded control. Because the device is designed around nanoWatt XLP technology, firmware can place the controller into low-power operating states between external events. This approach reduces average energy use in battery-powered sensors and controls while retaining fast start-up behavior for time-critical measurements and communications.

Typical applications include low-power sensor nodes, compact industrial controllers, temperature-measurement instruments, appliance interfaces, battery-operated monitoring equipment, and general embedded automation. Its 8-bit architecture and integrated flash make it appropriate for standalone control tasks that do not require the processing capacity or peripheral complexity of a 32-bit microcontroller.

PCB planning should begin with the manufacturer's 28-pin package drawing and pin-description table. Keep traces to sensitive oscillator and programming signals short, provide the recommended decoupling capacitors at the supply pins, and verify the complete programming and programming-tool configuration before layout release. The manufacturer datasheet should govern pin multiplexing, I/O limits, oscillator connections, and programming requirements.

This product page combines the manufacturer product information with distributor listings, package and lifecycle details, application guidance, and replacement analysis. It also identifies which technical attributes remain design-dependent so engineers can move from part selection to schematic, layout, firmware, and sourcing review without relying on a generic distributor description.

Alternatives de remplacement direct pour PIC16F723-I/SS — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec PIC16F723-I/SS (même facteur de forme et même empreinte) — différant par Internal Oscillator, Core Architecture, Package, Timers, ADC.

Microchip Technology
Internal Oscillator: 16 MHz (HF) / 32 kHz (LF), software selectable
Core Architecture: PIC16 Enhanced Mid-Range 8-bit RISC
Package: 28-SSOP (5.30 mm body, 0.65 mm pitch)
Microchip Technology
Internal Oscillator: 16 MHz with 2% accuracy (LF 31 kHz also)
Core Architecture: PIC16 Enhanced Mid-Range 8-bit
Package: 28-pin SSOP (5.30 mm body)
Microchip Technology
Internal Oscillator: 16 MHz (±1% factory calibrated)
Core Architecture: 8-bit PIC RISC (enhanced mid-range, 14-bit instruction word)
Package: 28-pin SSOP (5.30 mm body width)
Microchip Technology
Internal Oscillator: 16 MHz factory calibrated (±1%)
Core Architecture: PIC® mid-range 8-bit RISC
Package: 28-pin SSOP (5.30mm / 209-mil)

PIC16F723T-I/SS

✅ Remplacement direct
Microchip Technology
📦 28-pin SSOP
8-bit PIC RISC (enhanced mid-range, 14-bit instruction word) · 7 KB (4K x 14 words) · 192 bytes · 256 bytes · 20 MHz · 16 MHz (±1% factory calibrated) · 1.8 V to 5.5 V · 25 digital I/O (shared with analog functions)

Contactez-nous pour le prix

Voir la fiche technique →

PIC16F723-E/SS

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Microchip Technology
📦 28-pin SSOP
PIC16 Enhanced Mid-Range 8-bit RISC · 7 KB (4K x 14 words) · 192 bytes · 256 bytes · 20 MHz · 1.8 V to 5.5 V · 10-bit, up to 11 channels · 2 x 8-bit, 1 x 16-bit

Contactez-nous pour le prix

Voir la fiche technique →

PIC16F723T-E/SS

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-pin SSOP
Same PIC16F723 family and 28-pin SSOP package; -T and -E change assembly format and temperature grade rather than core performance

📋 Alternative de référence (hors catalogue)

PIC16F723-I/SS Valeurs maximales et caractéristiques électriques

Microcontroller Type 8-bit PIC RISC flash microcontroller
Fréquence d'horloge maximale 20 MHz
Flash Program Memory 7 KB (4K × 14 words)
Program Memory Architecture 14-bit PIC instruction words
Internal Oscillator 16 MHz
Package Type 28-pin SSOP
Nombre de broches 28 pins
Temperature Grade Industrial, -40°C to +85°C
Type de montage Surface mount
Low-Power Technology nanoWart XLP technology
Product Status In Production
Statut RoHS Compliant
Program Memory Type Flash
Lead Time 3-7 business days

Guide de configuration des broches du PIC16F723-I/SS 28-pin ssop

Configuration des broches du PIC16F723-I/SS (boîtier 28-pin ssop). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 28-pin ssop pour le PIC16F723-I/SS

Aucune donnée de brochage détaillée disponible pour PIC16F723-I/SS.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

PIC16F723-I/SS convient pour 6 applications: Low-Power Sensor Node, Temperature and Process Monitor, Battery-Operated Appliance Control, Compact Industrial Controller, LED Driver and Display Controller, Digital Instrumentation Front Panel.

🧩

Low-Power Sensor Node

The PIC16F723-I/SS fits compact sensor nodes because it combines a 20 MHz 8-bit PIC core with 7 KB of flash, a 16 MHz internal oscillator, and nanoWart XLP low-power technology. The integrated oscillator can reduce external clock complexity in designs that do not require a more precise time base. Place the controller between the sensor interface and a low-power communications or local-storage stage, then use sleep modes between measurements to reduce average energy use. Because the device is specified for -40°C to +85°C, it is also suitable for monitored industrial environments. Validate sensor accuracy, wake-up timing, and sleep current at the complete system level rather than treating controller specifications as total system consumption.

🏭

Temperature and Process Monitor

The PIC16F723-I/SS is appropriate for a compact temperature or process monitor when the design needs local control, event logging, and digital communication without a high-power processor. Its 20 MHz operating rate allows responsive sampling and control tasks, while the 7 KB flash capacity provides room for application firmware, calibration constants, and communication routines. The -40°C to +85°C industrial range supports operation in equipment rooms and industrial enclosures. The exact ADC resolution and channel count must be confirmed in the family datasheet before sensor selection. Use the manufacturer pin-description table to assign analog inputs and ensure that acquisition, reference, filtering, and calibration requirements are met.

⚡

Battery-Operated Appliance Control

The PIC16F723-I/SS can serve as the low-energy controller in a battery-operated appliance or portable instrument. Flash programming supports field-configurable logic without external program-memory components, and nanoWart XLP technology enables the firmware to remain inactive between user actions or scheduled events. Its 8-bit architecture is well suited to switches, indicators, simple sensors, and actuator-control logic where a 32-bit processor would add unnecessary cost and energy use. The 16 MHz internal oscillator may suit many timing tasks, though crystal-based accuracy may be needed for long intervals. Calculate average runtime from sleep current, active current, wake duration, and the load switched by external transistors rather than the controller current alone.

🏭

Compact Industrial Controller

PIC16F723-I/SS is suitable for compact industrial controllers that coordinate discrete inputs, outputs, timing functions, and local diagnostics. Its 20 MHz execution capability supports responsive control logic, while 7 KB of flash provides a practical firmware budget for state machines, interlocks, and data formatting. The -40°C to +85°C rating is appropriate for many industrial product categories, although the completed assembly must also satisfy its enclosure, isolation, surge, and EMC requirements. Use the 28-pin SSOP footprint for compact controller boards and follow the family datasheet for I/O limits, multiplexing, oscillator configuration, and decoupling. Confirm peripheral requirements early because different related family members may provide different combinations of timers, serial functions, and mixed-signal resources.

💡

LED Driver and Display Controller

The PIC16F723-I/SS can coordinate LED indicators, status displays, or simple lighting sequences where the main task is timing and control rather than graphics rendering. Its 20 MHz speed provides ample headroom for debouncing, dimming updates, fault indication, and communication with a display module. The 7 KB flash capacity allows compact application logic to be stored without an external memory device. Confirm the required PWM channels, comparator resources, and I/O allocation in the exact device data before assigning display signals. Keep switching drive paths and high-current LED stages physically separated from sensitive control traces, and use appropriate current limiting and protection so the microcontroller handles timing and logic rather than direct high power.

📺

Digital Instrumentation Front Panel

The PIC16F723-I/SS is well matched to a compact digital instrument that combines controls, status LEDs, local sensing, and a serial data link. Its 8-bit PIC instruction set and 20 MHz clock are sufficient for button handling, calibration, measurements, and packet formatting, while flash permits firmware updates and configuration storage within one device. The industrial temperature range supports controlled laboratory and industrial environments. Review the family datasheet for the required UART, I2C, SPI, ADC, and timer blocks because those capabilities determine whether this exact suffix satisfies the architecture. Use isolated or protected communication lines at the board boundary, and test firmware behavior across cold start, reset, brownout, and power-loss conditions.

Récapitulatif des produits recommandés

PIC16F723 Base family device used by the -I/SS ordering option Utilisé dans : Low-Power Sensor Node, Temperature and Process Monitor, Battery-Operated Appliance Control, Compact Industrial Controller, LED Driver and Display Controller, Digital Instrumentation Front Panel PIC16F723T-I/SS Microchip Technology Utilisé dans : Low-Power Sensor Node, Temperature and Process Monitor, Compact Industrial Controller PIC16F723-E/SS Microchip Technology Utilisé dans : Battery-Operated Appliance Control, Digital Instrumentation Front Panel PIC16F723T-E/SS Same-family extended-temperature configuration candidate Utilisé dans : LED Driver and Display Controller
What is the PIC16F723-I/SS?
The PIC16F723-I/SS is an active Microchip 8-bit PIC RISC flash microcontroller rated for up to 20 MHz, with 7 KB of flash memory organized as 4K × 14 words and a 28-pin SSOP package. According to the Microchip PIC16F723 product page, the device is in production and is part of the nanoWatt XLP low-power family. It is intended for embedded control, sensing, appliance, industrial, and battery-operated products where a compact 8-bit controller is preferable to a higher-power processor.
What are the key specifications of PIC16F723-I/SS that engineers should know?
The PIC16F723-I/SS combines a 20 MHz maximum operating frequency, 7 KB of flash program memory, 4K × 14 program words, a 16 MHz internal oscillator, and a 28-pin SSOP package. The -I grade supports -40°C to +85°C operation, and the device uses nanoWart XLP technology for low-power embedded designs. Microchip identifies the base PIC16F723 as in production. RAM, EEPROM, ADC details, and exact peripheral counts should be confirmed in the manufacturer datasheet for the selected package and temperature grade.
Where can I download the PIC16F723-I/SS datasheet PDF?
The official Microchip PIC16F723 product page is the best starting point for the manufacturer datasheet and associated documentation. The public search listing for this exact suffix identifies the document as covering the 28-, 40-, and 44-pin flash microcontrollers with nanoWart XLP technology. Open the PIC16F723 product page, select the documentation resources, and choose the datasheet appropriate for the 28-pin /SS variant. Use the manufacturer package pinout and electrical-characteristics tables for engineering release rather than relying on a distributor summary.
Where can I find the PIC16F723-I/SS pinout?
The PIC16F723-I/SS pinout is found in the pin-description table and package drawing in the Microchip PIC16F723 family datasheet. The device uses a 28-pin SSOP and has both digital I/O and alternate-function multiplexing, so the complete pin-description table is necessary. Do not infer the SSOP numbering from a 28-pin DIP or another package. Confirm the pin map, power pins, oscillator pins, programming pins, reset behavior, and exposed functions against the exact package drawing before assigning PCB tracks.
Is PIC16F723-I/SS suitable for low-power applications?
Yes, the PIC16F723-I/SS is suitable for low-power applications because it belongs to Microchip's nanoWart XLP family and supports an integrated 16 MHz internal oscillator. Low-power behavior depends on the selected clock configuration, peripheral activity, firmware duty cycle, and sleep-mode settings. The microcontroller can support event-driven sensing and control without requiring an external oscillator in suitable designs. Final battery-life calculations should include the operating current, sleep current, wake-up behavior, and external sensor loads.
What is the difference between the -I and -E versions of PIC16F723?
The principal documented distinction is the temperature grade: PIC16F723-I/SS supports -40°C to +85°C, while an E-grade selection is associated with an extended temperature range. The suffix also identifies the package and qualification variant. For a drop-in decision, confirm that the candidate has the same 28-pin SSOP footprint, compatible pin multiplexing, required clock arrangement, and operating range. Temperature range alone does not establish drop-in compatibility; review the manufacturer package and pin tables as well as the electrical limits.
Can PIC16F723T-I/SS replace PIC16F723-I/SS?
PIC16F723T-I/SS is a same-family candidate that appears in the manufacturer-linked cross-reference results, but final substitution still requires confirmation of the package, pinout, temperature grade, clock configuration, and device identifier. The -T designation generally indicates a tape-and-reel ordering option, while /SS identifies the package. Treat the change as a procurement or assembly-format review first, then compare the manufacturer ordering table and datasheet to ensure that no functional or marking distinction changes the assembled board.
What is the best drop-in replacement for PIC16F723-I/SS?
The best drop-in replacement is the candidate with the same 28-pin SSOP footprint, the same 14-bit PIC core, compatible memory organization, matching peripheral pin functions, and an equal or wider required temperature range. PIC16F723T-I/SS is the closest identified same-family option because the cross-reference result names that exact variant; it differs principally by the -T assembly suffix. Confirm the ordering table and pin-compatibility chart before substitution. Cross-brand devices should not be selected from name similarity alone because instruction sets, peripherals, and programming configurations can differ.
What can replace PIC16F723-I/SS?
PIC16F723T-I/SS is a candidate replacement because it is listed in the Microchip cross-reference search and belongs to the same PIC16F723 family. It retains the 28-pin SSOP ordering code while adding the -T tape-and-reel option. Before replacing the target, verify pin multiplexing, supply limits, oscillator configuration, memory capacity, peripheral functions, programming settings, and the required temperature range against the manufacturer datasheet. A same-family designation alone does not guarantee that every programming or production configuration is interchangeable.
Is PIC16F723-I/SS the same as PIC16F723-E/SS?
No. PIC16F723-I/SS and PIC16F723-E/SS share the base device family and 28-pin SSOP package designation, but their temperature-grade suffixes are not interchangeable for every operating environment. The -I version supports -40°C to +85°C, while the E version requires review for its own temperature range and qualification conditions. Check the manufacturer ordering information, absolute maximum ratings, and device identification requirements before deciding whether the E-grade part can replace the I-grade part.
When should I choose PIC16F723-I/SS over another PIC16 family member?
Choose PIC16F723-I/SS when the design requires a 20 MHz 8-bit controller, 7 KB of flash, a 28-pin SSOP footprint, and operation from -40°C to +85°C. A related part with less flash may be preferable when code size is the priority, while a larger-memory relative may suit more complex firmware. If the target application needs different mixed-signal or communication peripherals, compare those blocks before choosing. The package and memory requirements should be fixed first, followed by temperature and programming requirements.
Is PIC16F723-I/SS suitable for industrial control and sensor applications?
Yes, PIC16F723-I/SS is suitable for many industrial control and sensor applications because its industrial temperature range is -40°C to +85°C and its flash-based 8-bit architecture supports standalone embedded operation. The integrated 16 MHz oscillator can simplify designs where an external clock is unnecessary, while nanoWart XLP technology supports duty-cycled operation. Confirm ADC, timer, serial-interface, and I/O requirements in the datasheet, and apply appropriate isolation, surge protection, and environmental design practices at the system level.
Where can I buy PIC16F723-I/SS online?
Use the Request a Quote form on this page to ask for PIC16F723-I/SS availability, current lead time, and order confirmation. The device is listed as active and in production by Microchip, and a distributor listing states a lead time of 3-7 business days. For a production order, confirm the exact /SS suffix, quantity, assembly format, and delivery requirements through the quote workflow so the requested configuration is matched exactly.
What is the price of PIC16F723-I/SS?
The current commercial terms for PIC16F723-I/SS should be obtained through the Request a Quote form on this page. Pricing can change with quantity, inventory, package or assembly format, and market conditions, so a static amount would not represent a reliable quotation. Include your required quantity, target date, and shipment destination in the request to receive a current response for the exact MPN.
What is the lead time for PIC16F723-I/SS?
A distributor listing states a lead time of 3-7 business days for PIC16F723-I/SS, while Microchip identifies the base device as in production. Treat that interval as a listing reference rather than a guaranteed schedule for every quantity. Use the Request a Quote form on this page to confirm current availability, manufacturing lead time, and shipment timing for your order quantity. Also specify whether the required delivery format is tube, tape and reel, or another authorized packing option.
Is PIC16F723-I/SS in stock?
PIC16F723-I/SS is described as active and in production, and a distributor listing states a 3-7 business-day lead time. Stock levels can change by package suffix, quantity, and region, so use the Request a Quote form on this page for a current availability confirmation. Provide the exact MPN, required quantity, packing preference, and delivery location to avoid ambiguity between the base device and its assembly-format variants.
Which programming tools are compatible with PIC16F723-I/SS?
The PIC16F723-I/SS is programmed through the Microchip toolchain and programming interface appropriate for the PIC16 family, subject to the device and package configuration stated in the manufacturer documentation. The base device supports 7 KB of flash program memory, and the selected programmer must recognize that memory size and the correct device identifier. Confirm the supported device list, programming voltage requirements, connector wiring, and any configuration-bit handling with Microchip before committing the production programming setup.

Données de référence d'ingénierie pour PIC16F723-I/SS — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose PIC16F723-I/SS when the design specifically requires a 20 MHz 8-bit PIC controller with 7 KB of flash, a 16 MHz internal oscillator, nanoWart XLP support, and operation from -40°C to +85°C in a 28-pin SSOP package. PIC16F723T-I/SS is the closest identified alternative when the same functional grade is needed with the -T ordering suffix; verify the authorized packing format and device marking. Consider PIC16F723-E/SS or PIC16F723T-E/SS when the product requires the E-grade temperature range rather than the target's industrial range. These options are preferable to an unrelated cross-brand controller because they retain the 14-bit PIC architecture and family pin configuration. Before final selection, confirm ADC, timer, serial-interface, I/O, programming, and package requirements in the Microchip datasheet, since the suffix-level comparison alone does not establish every application requirement.

Comparaison avec les alternatives

Paramètre Ce produit PIC16F723T-I/SS PIC16F723-E/SS PIC16F723T-E/SS
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Flash Program Memory 7 KB (4K × 14 words) 7 KB (4K × 14 words) 7 KB (4K × 14 words) 7 KB (4K × 14 words)
Temperature Grade -40°C to +85°C -40°C to +85°C E-grade temperature range E-grade temperature range
Assembly Suffix No -T suffix -T ordering suffix No -T suffix -T ordering suffix
Internal Oscillator 16 MHz 16 MHz 16 MHz 16 MHz
Low-Power Technology nanoWart XLP technology nanoWart XLP technology nanoWart XLP technology nanoWart XLP technology
Lifecycle Status In Production In Production In Production In Production
Programmable Memory Type Flash Flash Flash Flash

Principaux différenciateurs

  • Combines a 20 MHz maximum clock with 7 KB of embedded flash (vs PIC16F723T-I/SS)
  • Industrial temperature grade (vs PIC16F723-E/SS)
  • Compact 28-pin SSOP integration (vs PIC16F723T-E/SS)

Notes de conception

Use the exact 28-pin SSOP land pattern from the Microchip package drawing and verify it against the PCB library before fabrication. Route programming, reset, and oscillator-related nets away from noisy switching stages. Place the required bypass capacitors at the supply pins with short ground returns, and keep the SSOP footprint free from accidental solder bridges between the closely spaced leads. Because alternate-function assignments vary by pin, review the complete manufacturer pin-description table rather than assigning signals from a generic 28-pin package diagram.

Low-power performance depends on firmware and board behavior, not only the nanoWart XLP label. Disable unused peripherals, select an appropriate clock configuration, and place the controller into its documented low-power state during idle intervals. Confirm wake-up timing against the application's sampling and communication schedule. Estimated: average current equals active current multiplied by active duty cycle plus sleep current multiplied by sleep duty cycle; use measured or datasheet worst-case values and include sensor and communication loads in the final battery calculation.

Do not treat the I, E, T, and SS suffixes as interchangeable without checking the ordering table. The I designation identifies the industrial temperature grade, T identifies an ordering or assembly format, and SS identifies the package. Also verify that the programmed device identifier matches the exact fitted part. Review configuration bits, oscillator settings, brownout behavior, and peripheral pin multiplexing during firmware bring-up so a hardware-compatible substitution does not create an application-level incompatibility.

If the internal oscillator is adequate, avoid adding an external crystal and unnecessary load capacitors, but retain the option to support stricter timing requirements. Keep any oscillator component placement short and symmetrical relative to the associated pins. For mixed-signal boards, separate analog sensor inputs from digital switching paths, provide a quiet return for analog references, and use the package datasheet's grounding recommendations. Validate the final arrangement with signal-integrity and thermal testing because controller timing errors can appear far from the source of the noise.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is identified for the exact MPN. No explicit REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for this ordering option.

Recherches associées

pic16f723 datasheet PIC16F723-I/SS PIC16F723-I/SS datasheet PIC16F723-I/SS datasheet pdf PIC16F723-I/SS pinout PIC16F723-I/SS specifications PIC16F723 20MHz 8-bit microcontroller PIC16F723 7KB flash MCU PIC16F723 28-pin SSOP pinout PIC16F723-I/SS replacement PIC16F723-I/SS vs PIC16F723T-I/SS PIC16F723 low power sensor application PIC16F723-I/SS price PIC16F723-I/SS stock Microchip PIC16F723-I/SS

Composants & termes associés

Microchip Technology PIC16F723-I/SS PIC16F723 PIC16F723T-I/SS PIC16F723-E/SS PIC16F723T-E/SS 8-bit microcontroller PIC RISC architecture 14-bit instruction word flash program memory nanoWart XLP technology 20 MHz operating frequency 16 MHz internal oscillator 28-pin SSOP surface-mount package low-power embedded control industrial temperature range RoHS battery-powered sensor node industrial controller temperature monitoring digital instrumentation programmable controller semiconductor
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ