PIC16F723-I/SS - 20MHz 8-Bit 7KB Flash MCU | Microchip
料号: PIC16F723-I/SS ✓ 量产中PIC16F723-I/SS 概述
An 8-bit microcontroller is a complete programmable control platform integrating a processor core, flash memory, RAM, oscillators, timers, communication peripherals, and general-purpose I/O into one device. Within the embedded-control hierarchy, the PIC16F723-I/SS belongs to the PIC16 family of flash-based microcontrollers and the broader category of microcontrollers, microprocessors, and semiconductors. Its combination of 20 MHz operation and nanoWatt XLP technology supports both responsive control loops and duty-cycled battery-powered designs.
Key device characteristics include a maximum operating frequency of 20 MHz, 7 KB of internal flash, a 28-pin SSOP package, an industrial temperature range of -40°C to +85°C, and an integrated 16 MHz internal oscillator. The -I temperature designation supports operation across that industrial range, while the /SS package suffix identifies the 28-pin small-outline package used for compact PCB layouts.
The PIC16F723 uses Microchip's 14-bit PIC architecture and combines flash program memory with integrated peripherals for embedded control. Because the device is designed around nanoWatt XLP technology, firmware can place the controller into low-power operating states between external events. This approach reduces average energy use in battery-powered sensors and controls while retaining fast start-up behavior for time-critical measurements and communications.
Typical applications include low-power sensor nodes, compact industrial controllers, temperature-measurement instruments, appliance interfaces, battery-operated monitoring equipment, and general embedded automation. Its 8-bit architecture and integrated flash make it appropriate for standalone control tasks that do not require the processing capacity or peripheral complexity of a 32-bit microcontroller.
PCB planning should begin with the manufacturer's 28-pin package drawing and pin-description table. Keep traces to sensitive oscillator and programming signals short, provide the recommended decoupling capacitors at the supply pins, and verify the complete programming and programming-tool configuration before layout release. The manufacturer datasheet should govern pin multiplexing, I/O limits, oscillator connections, and programming requirements.
This product page combines the manufacturer product information with distributor listings, package and lifecycle details, application guidance, and replacement analysis. It also identifies which technical attributes remain design-dependent so engineers can move from part selection to schematic, layout, firmware, and sourcing review without relying on a generic distributor description.
直接替换替代料: PIC16F723-I/SS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC16F723-I/SS (相同外形与封装尺寸) ——差异在于 Internal Oscillator, Core Architecture, Package, Timers, ADC.
PIC16F723T-I/SS
✅ 直接替换联系询价
查看数据手册 →PIC16F723-E/SS
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →PIC16F723T-E/SS
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC16F723-I/SS 最大额定值与电气特性
| Microcontroller Type | 8-bit PIC RISC flash microcontroller |
| 最大时钟频率 | 20 MHz |
| Flash Program Memory | 7 KB (4K × 14 words) |
| Program Memory Architecture | 14-bit PIC instruction words |
| Internal Oscillator | 16 MHz |
| Package Type | 28-pin SSOP |
| 引脚数量 | 28 pins |
| Temperature Grade | Industrial, -40°C to +85°C |
| 安装类型 | Surface mount |
| Low-Power Technology | nanoWart XLP technology |
| Product Status | In Production |
| RoHS 状态 | Compliant |
| Program Memory Type | Flash |
| Lead Time | 3-7 business days |
PIC16F723-I/SS 28-pin ssop 引脚配置指南
PIC16F723-I/SS(28-pin ssop 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC16F723-I/SS.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC16F723-I/SS 适用于 6 应用s: Low-Power Sensor Node, Temperature and Process Monitor, Battery-Operated Appliance Control, Compact Industrial Controller, LED Driver and Display Controller, Digital Instrumentation Front Panel.
Low-Power Sensor Node
The PIC16F723-I/SS fits compact sensor nodes because it combines a 20 MHz 8-bit PIC core with 7 KB of flash, a 16 MHz internal oscillator, and nanoWart XLP low-power technology. The integrated oscillator can reduce external clock complexity in designs that do not require a more precise time base. Place the controller between the sensor interface and a low-power communications or local-storage stage, then use sleep modes between measurements to reduce average energy use. Because the device is specified for -40°C to +85°C, it is also suitable for monitored industrial environments. Validate sensor accuracy, wake-up timing, and sleep current at the complete system level rather than treating controller specifications as total system consumption.
推荐
Temperature and Process Monitor
The PIC16F723-I/SS is appropriate for a compact temperature or process monitor when the design needs local control, event logging, and digital communication without a high-power processor. Its 20 MHz operating rate allows responsive sampling and control tasks, while the 7 KB flash capacity provides room for application firmware, calibration constants, and communication routines. The -40°C to +85°C industrial range supports operation in equipment rooms and industrial enclosures. The exact ADC resolution and channel count must be confirmed in the family datasheet before sensor selection. Use the manufacturer pin-description table to assign analog inputs and ensure that acquisition, reference, filtering, and calibration requirements are met.
推荐
Battery-Operated Appliance Control
The PIC16F723-I/SS can serve as the low-energy controller in a battery-operated appliance or portable instrument. Flash programming supports field-configurable logic without external program-memory components, and nanoWart XLP technology enables the firmware to remain inactive between user actions or scheduled events. Its 8-bit architecture is well suited to switches, indicators, simple sensors, and actuator-control logic where a 32-bit processor would add unnecessary cost and energy use. The 16 MHz internal oscillator may suit many timing tasks, though crystal-based accuracy may be needed for long intervals. Calculate average runtime from sleep current, active current, wake duration, and the load switched by external transistors rather than the controller current alone.
推荐
Compact Industrial Controller
PIC16F723-I/SS is suitable for compact industrial controllers that coordinate discrete inputs, outputs, timing functions, and local diagnostics. Its 20 MHz execution capability supports responsive control logic, while 7 KB of flash provides a practical firmware budget for state machines, interlocks, and data formatting. The -40°C to +85°C rating is appropriate for many industrial product categories, although the completed assembly must also satisfy its enclosure, isolation, surge, and EMC requirements. Use the 28-pin SSOP footprint for compact controller boards and follow the family datasheet for I/O limits, multiplexing, oscillator configuration, and decoupling. Confirm peripheral requirements early because different related family members may provide different combinations of timers, serial functions, and mixed-signal resources.
推荐
LED Driver and Display Controller
The PIC16F723-I/SS can coordinate LED indicators, status displays, or simple lighting sequences where the main task is timing and control rather than graphics rendering. Its 20 MHz speed provides ample headroom for debouncing, dimming updates, fault indication, and communication with a display module. The 7 KB flash capacity allows compact application logic to be stored without an external memory device. Confirm the required PWM channels, comparator resources, and I/O allocation in the exact device data before assigning display signals. Keep switching drive paths and high-current LED stages physically separated from sensitive control traces, and use appropriate current limiting and protection so the microcontroller handles timing and logic rather than direct high power.
推荐
Digital Instrumentation Front Panel
The PIC16F723-I/SS is well matched to a compact digital instrument that combines controls, status LEDs, local sensing, and a serial data link. Its 8-bit PIC instruction set and 20 MHz clock are sufficient for button handling, calibration, measurements, and packet formatting, while flash permits firmware updates and configuration storage within one device. The industrial temperature range supports controlled laboratory and industrial environments. Review the family datasheet for the required UART, I2C, SPI, ADC, and timer blocks because those capabilities determine whether this exact suffix satisfies the architecture. Use isolated or protected communication lines at the board boundary, and test firmware behavior across cold start, reset, brownout, and power-loss conditions.
推荐
推荐产品汇总
工程参考数据: PIC16F723-I/SS ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16F723T-I/SS | PIC16F723-E/SS | PIC16F723T-E/SS |
|---|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Program Memory | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) |
| Temperature Grade | -40°C to +85°C | -40°C to +85°C | E-grade temperature range | E-grade temperature range |
| Assembly Suffix | No -T suffix | -T ordering suffix | No -T suffix | -T ordering suffix |
| Internal Oscillator | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Low-Power Technology | nanoWart XLP technology | nanoWart XLP technology | nanoWart XLP technology | nanoWart XLP technology |
| Lifecycle Status | In Production | In Production | In Production | In Production |
| Programmable Memory Type | Flash | Flash | Flash | Flash |
关键差异点
- Combines a 20 MHz maximum clock with 7 KB of embedded flash (对比 PIC16F723T-I/SS)
- Industrial temperature grade (对比 PIC16F723-E/SS)
- Compact 28-pin SSOP integration (对比 PIC16F723T-E/SS)
设计说明
Use the exact 28-pin SSOP land pattern from the Microchip package drawing and verify it against the PCB library before fabrication. Route programming, reset, and oscillator-related nets away from noisy switching stages. Place the required bypass capacitors at the supply pins with short ground returns, and keep the SSOP footprint free from accidental solder bridges between the closely spaced leads. Because alternate-function assignments vary by pin, review the complete manufacturer pin-description table rather than assigning signals from a generic 28-pin package diagram.
Low-power performance depends on firmware and board behavior, not only the nanoWart XLP label. Disable unused peripherals, select an appropriate clock configuration, and place the controller into its documented low-power state during idle intervals. Confirm wake-up timing against the application's sampling and communication schedule. Estimated: average current equals active current multiplied by active duty cycle plus sleep current multiplied by sleep duty cycle; use measured or datasheet worst-case values and include sensor and communication loads in the final battery calculation.
Do not treat the I, E, T, and SS suffixes as interchangeable without checking the ordering table. The I designation identifies the industrial temperature grade, T identifies an ordering or assembly format, and SS identifies the package. Also verify that the programmed device identifier matches the exact fitted part. Review configuration bits, oscillator settings, brownout behavior, and peripheral pin multiplexing during firmware bring-up so a hardware-compatible substitution does not create an application-level incompatibility.
If the internal oscillator is adequate, avoid adding an external crystal and unnecessary load capacitors, but retain the option to support stricter timing requirements. Keep any oscillator component placement short and symmetrical relative to the associated pins. For mixed-signal boards, separate analog sensor inputs from digital switching paths, provide a quiet return for analog references, and use the package datasheet's grounding recommendations. Validate the final arrangement with signal-integrity and thermal testing because controller timing errors can appear far from the source of the noise.
合规信息
RoHS compliance is identified for the exact MPN. No explicit REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for this ordering option.