PIC16F724-I/ML - 8-Bit 20MHz Flash MCU | Microchip
Référence : PIC16F724-I/ML ✓ ActifPIC16F724-I/ML Présentation
A flash-based PIC microcontroller is an embedded integrated circuit containing a processor core, nonvolatile program memory, data memory, and peripherals on one semiconductor die. PIC16 devices belong to the Microchip 8-bit PIC family, which sits within the broader embedded-controller and semiconductor hierarchy. Flash memory retains programmed instructions when power is removed, allowing firmware updates without a separate external memory component. Peripheral resources such as timers, communication interfaces, and analog conversion functions are selected according to the exact device configuration and pin assignment.
The PIC16F724-I/ML provides 7 KB of flash memory organized as 4K × 14, a maximum operating frequency of 20 MHz, and an internal oscillator identified at 16 MHz. Its 44-terminal package supports a higher pin count than smaller PIC16 devices, making it appropriate for control boards that need more I/O than a compact 8-pin or 14-pin controller. The -I suffix identifies the industrial-temperature grade, while the ML suffix identifies the no-lead package used for surface-mount assembly.
The 8-bit architecture is designed for efficient embedded control rather than high-throughput computing. Firmware can use timer and interrupt-driven sequencing for deterministic control loops, while flash retains application code between power cycles. The 16 MHz internal oscillator provides a convenient clock source when an external crystal is unnecessary, although final timing, peripheral configuration, and maximum-frequency conditions must be checked against the manufacturer datasheet for the selected clock configuration.
Typical applications include industrial sensor controllers, small motor-control modules, building automation interfaces, power-supply supervisory circuits, and compact embedded instruments. Its 44-pin package is particularly useful when a design needs more I/O than lower-pin-count PIC16 devices while avoiding a through-hole footprint. The combination of flash program memory and an internal oscillator also simplifies standalone controller designs that do not require an external program-memory device.
PCB planning should preserve the package dimensions, exposed-pad requirements, pin numbering, and recommended land pattern specified by Microchip. Place decoupling capacitors close to the supply pins and route high-current or switching signals away from sensitive analog inputs. Before release, validate oscillator tolerance, peripheral operating limits, watchdog behavior, brownout settings, and firmware timing across the complete industrial temperature range.
This product page combines the exact PIC16F724-I/ML ordering information with package identification, technical source links, same-brand replacement analysis, and practical implementation guidance. It helps engineers distinguish the 44-terminal ML package from other PIC16F724 package options while supporting schematic review, PCB layout, sourcing, and firmware-impact assessment.
Alternatives de remplacement direct pour PIC16F724-I/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16F724-I/ML (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, ADC, Internal Oscillator, Low-Power Technology.
PIC16F727-I/ML
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC16F726-I/ML
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC16F1825-I/ML
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC16F1827-I/ML
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC16F1789-I/ML
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC16F724-I/ML Valeurs maximales et caractéristiques électriques
| Device Type | 8-bit flash-based microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Internal Oscillator | 16 MHz |
| Flash Memory | 7 KB |
| Program Memory Organization | 4K × 14 bits |
| Architecture | PIC 8-bit RISC |
| Product Series | PIC16 |
| Temperature Grade | Industrial |
| Package Type | 44-terminal no-lead square package |
| Terminal Count | 44 terminals |
| Type de montage | Surface mount |
| Package Code | HVQCCN |
Guide de configuration des broches du PIC16F724-I/ML hvqccn
Configuration des broches du PIC16F724-I/ML (boîtier hvqccn). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC16F724-I/ML.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC16F724-I/ML convient pour 6 applications: Industrial Sensor Controller, Building Automation Interface, Power Supply Supervisor, Small Motor Controller, Compact Embedded Instrument, Low-Power Remote Sensor Node.
Industrial Sensor Controller
The PIC16F724-I/ML fits compact industrial sensor modules that combine multiple digital inputs with a small amount of local control logic. Its 8-bit processor and 7 KB of flash are sufficient for interrupt-driven sampling, filtering, threshold management, and status reporting when the application does not require complex protocol stacks. The 44-terminal package provides substantially more interface options than a minimal 8-pin or 14-pin controller. Use the 16 MHz internal oscillator as a starting point, then confirm startup, timing, and peripheral limits against the manufacturer data sheet. Place decoupling close to the supply pins and keep sensor inputs away from switching nodes to improve noise immunity.
Recommandé
Building Automation Interface
PIC16F724-I/ML can serve as the local controller in a building-automation node that reads environmental inputs and controls lamps, relays, or digital actuators. Flash memory allows application logic and configuration data to remain resident between power cycles, while the 8-bit core can execute deterministic control and communication tasks. The 44-terminal ML package supports a mix of control outputs and status inputs without requiring a larger through-hole footprint. A practical design should use timer-based scheduling, watchdog recovery, and careful input filtering. Validate logic levels, output drive requirements, and communication timing for the selected peripheral configuration before production release.
Recommandé
Power Supply Supervisor
The PIC16F724-I/ML is appropriate for a programmable supply supervisor that monitors voltage, drives status indicators, and coordinates a sequence of enabled loads. Its 7 KB flash capacity can hold thresholds, timers, fault counters, and communication routines, while the 20 MHz maximum clock provides margin for responsive event handling. The 44-terminal package allows monitoring and control signals to be distributed without crowding a smaller device. The performance trade-off is that firmware must manage initialization, debounce, fault latching, and recovery behavior explicitly. Review the electrical characteristics for every monitored and driven node, and isolate analog feedback traces from switching-power-node layouts.
Recommandé
Small Motor Controller
PIC16F724-I/ML can control a small DC motor or solenoid system where a compact 8-bit controller must coordinate pulse-width modulation, direction outputs, current feedback, and fault handling. The 44-terminal ML package offers enough connections for control logic, gate-driver interfaces, feedback signals, and status LEDs. The 7 KB flash footprint is useful for compact control algorithms, provided the application avoids workloads that benefit from a higher-bit architecture or larger code memory. Use hardware timers for deterministic pulse generation and isolate motor-switching traces from sensitive feedback paths. Confirm pin multiplexing and peripheral conflicts in the Microchip documentation before assigning motor-control functions.
Recommandé
Compact Embedded Instrument
The PIC16F724-I/ML suits compact instruments that acquire sensor data, display measurements, and communicate with a host. Its internal 16 MHz oscillator reduces the external component count when precision beyond the calibrated oscillator requirement is unnecessary, while 7 KB flash supports compact measurement and control firmware. The 44-terminal package provides a practical balance between I/O capacity and board area. Designers should budget code space for calibration, filtering, diagnostics, and protocol handling, and should verify the required ADC, timer, and serial-interface resources. The 20 MHz maximum CPU frequency provides operating margin for responsive control but does not remove the need for interrupt-based design.
Recommandé
Low-Power Remote Sensor Node
PIC16F724-I/ML can support a low-power remote sensor node when the design uses the internal oscillator, flash retention, and interrupt-driven measurement rather than continuous heavy computation. The 7 KB flash capacity allows sleep-aware firmware to maintain configuration, perform periodic measurements, and transmit short status packets. Industrial-temperature ordering supports deployments where the enclosure temperature can vary, subject to the verified operating limits in the manufacturer data sheet. The 44-terminal ML package leaves additional pins available for radio-control signals, energy-storage monitoring, and local indicators. Minimize leakage around sensitive nodes, retain decoupling for radio transients, and verify every wake-up and brownout condition in hardware.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16F724-I/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F727-I/ML | PIC16F726-I/ML | PIC16F1825-I/ML | PIC16F1827-I/ML | PIC16F1789-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-terminal ML no-lead square package | 44-terminal ML no-lead square package | 44-terminal ML no-lead square package | 44-terminal ML no-lead square package | 44-terminal ML no-lead square package | 44-terminal ML no-lead square package |
| Architecture | 8-bit PIC architecture | 8-bit PIC architecture | 8-bit PIC architecture | 8-bit PIC architecture | 8-bit PIC architecture | 8-bit PIC architecture |
| Flash Memory | 7 KB | 14 KB | 8 KB | 14 KB | 14 KB | 28 KB |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Industrial | Industrial |
| Terminal Count | 44 terminals | 44 terminals | 44 terminals | 44 terminals | 44 terminals | 44 terminals |
Principaux différenciateurs
- Exact 7 KB flash target with a 4K × 14 organization (vs PIC16F1789-I/ML)
- Established PIC16F72x device organization (vs PIC16F1825-I/ML)
- Smaller flash footprint for applications with constrained code size (vs PIC16F726-I/ML)
- 44-terminal no-lead industrial-grade package (vs PIC16F1827-I/ML)
Notes de conception
Use the 44-terminal ML land pattern and exposed-pad guidance in the Microchip package drawing rather than scaling a generic QFN footprint. Confirm pin 1 orientation, pad dimensions, thermal-via configuration, solder-mask limits, and copper keepouts during layout review. Place bulk and local decoupling capacitors adjacent to their supply pins, provide a low-impedance ground reference, and avoid routing clock or sensitive analog inputs beneath noisy switching nodes.
Plan the supply network for both static controller demand and transient effects from peripherals. The internal 16 MHz oscillator avoids an external crystal in many designs, but oscillator configuration, startup behavior, and brownout settings still need validation. Use local bulk capacitance to support supply transients and separate analog, digital, and switched-load return paths where the board layout permits. Confirm absolute maximum and operating voltage conditions directly from the manufacturer electrical characteristics before assigning external signal levels.
Do not treat the ML package suffix as proof that firmware is interchangeable across PIC16 families. After a hardware substitution, rebuild the project with the replacement's device configuration, then review boot configuration words, oscillator settings, timers, serial interfaces, interrupt priorities, peripheral pin multiplexing, and any code-generation dependencies. Perform boundary tests for startup, brownout recovery, watchdog timeout, maximum clock, and peripheral operation across the intended temperature range.
Assign time-sensitive signals according to the datasheet's dedicated peripheral functions instead of relying on software bit-banging where avoidable. Use timer-based waveform generation, confirm peripheral input thresholds, and keep external interrupt inputs away from potential sources of ringing or slow-edge noise. If the design switches an inductive or high-current load, route that current through a controlled power path and provide local return-current management to prevent disturbance of the MCU and analog measurement circuitry.
Informations de conformité
The exact-MPN sources do not provide a complete compliance statement. The industrial-temperature suffix is not, by itself, an AEC-Q100 qualification claim.