PIC16LF1707-E/SO - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
Référence : PIC16LF1707-E/SO ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.2266 | $1,23 |
| 10 | $1.1 | $11,00 |
| 100 | $0.96 | $96,00 |
| 500 | $0.84 | $420,00 |
| 1 000 | $0.74 | $740,00 |
PIC16LF1707-E/SO Présentation
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus, used to sense, decide, and actuate in embedded systems. The PIC16LF1707-E/SO belongs to the broader hierarchy of microcontroller -> 8-bit MCU -> Flash MCU -> low-power MCU, optimized for cost-sensitive general-purpose applications requiring minimal power consumption. The 'LF' prefix denotes the low-power 'F' (Flash) variant supporting down to 1.8V operation, while 'XLP' branding reflects Microchip's eXtreme Low Power technology platform.
Key features of this part include an integrated 10-bit Analog-to-Digital Converter (ADC), two operational amplifiers (op-amps) that can be configured as rail-to-rail stages, and a peripheral pin select (PPS) mechanism that allows flexible function-to-pin mapping. The on-chip 4-channel Capture/Compare/PWM (CCP) module handles motor control or LED dimming, while the Numerically Controlled Oscillator (NCO) provides precision frequency generation for timing-sensitive applications. CIP (Core Independent Peripherals) like CWG, NCO, and CCL let designers implement complex logic without CPU intervention.
Typical applications span IoT sensor nodes, battery-powered remote controls, low-cost motor drivers, LED lighting controllers, and consumer appliances where small pin count, low quiescent current, and integrated analog peripherals reduce BOM cost. The -40C to +125C extended temperature grade (-E suffix) ensures operation in harsh industrial environments. Designers familiar with MPLAB X IDE and XC8 compiler can program and debug this part using PICkit programmers or Curiosity development boards.
When selecting the PIC16LF1707-E/SO, prioritize it for designs requiring small 8-bit footprint with on-board op-amps and ADC. If your application needs more I/O or larger memory, consider the PIC16LF1708/1709 family. The SOIC-20 wide-body package (7.50mm width) offers robust handling for hand-prototyping and through-hole conversions with carrier boards.
Alternatives de remplacement direct pour PIC16LF1707-E/SO — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16LF1707-E/SO (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, Operating Temperature Range, Program Memory (Flash).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16LF1707-I/SO
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.05 / unité
Voir la fiche technique →PIC16LF1708-I/SO
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.05 / unité
Voir la fiche technique →PIC16LF1507-I/SO
✅ Remplacement direct✓ En stock
$0.78 / unité
Voir la fiche technique →PIC16LF1707-E/SO Valeurs maximales et caractéristiques électriques
| Series | PIC® XLP™ 16F |
| Core | 8-bit PIC16 |
| Program Memory Size | 3.5 KB (2K x 14) Flash |
| RAM Size | 256 bytes |
| EEPROM Size | 128 bytes |
| Number of I/O Pins | 17 (max) |
| Fréquence d'horloge maximale | 32 MHz |
| Instruction Set | Enhanced Mid-Range PIC16 |
| Supply Voltage Range | 1.8 V to 3.6 V |
| ADC Resolution | 10-bit |
| Number of Op-Amps | 2 (on-chip) |
| PWM Channels | 4 (CCP module) |
| Plage de température de fonctionnement | -40 C to +125 C (Extended, -E) |
| Boîtier | 20-pin SOIC (0.295", 7.50mm Width) |
| Type de montage | Surface Mount |
| Niveau MSL | 1 (per JEDEC J-STD-020, typical) |
| Statut RoHS | Compliant |
Configuration des broches de PIC16LF1707-E/SO
| Broche 1 | RA0/ICSPDAT — Bidirectional I/O, ICSP data, analog input |
| Broche 2 | RA1/ICSPCLK — Bidirectional I/O, ICSP clock, analog input |
| Broche 3 | RA2 — Bidirectional I/O, analog input |
| Broche 4 | RA3/MCLR/VPP — Bidirectional I/O, master clear (reset) input, programming voltage input |
| Broche 5 | RA4 — Bidirectional I/O, analog input |
| Broche 6 | RA5 — Bidirectional I/O, analog input |
| Broche 7 | RA6 — Bidirectional I/O |
| Broche 8 | RA7 — Bidirectional I/O |
| Broche 9 | RE3 — Bidirectional I/O (MCLR disabled, dedicated I/O) |
| Broche 10 | RC0 — Bidirectional I/O |
| Broche 11 | RC1 — Bidirectional I/O |
| Broche 12 | RC2 — Bidirectional I/O |
| Broche 13 | RC3 — Bidirectional I/O |
| Broche 14 | RC4 — Bidirectional I/O |
| Broche 15 | RC5 — Bidirectional I/O |
| Broche 16 | RC6 — Bidirectional I/O |
| Broche 17 | RC7 — Bidirectional I/O |
| Broche 18 | VDD — Positive supply voltage |
| Broche 19 | RB6 — Bidirectional I/O, ICSPCLK |
| Broche 20 | VSS — Ground reference |
Applications typiques
PIC16LF1707-E/SO convient pour 7 applications: Battery-Powered IoT Sensor Nodes, Low-Cost Ceiling Fan / LED Lighting Controllers, Remote Controls and Consumer Appliances, Industrial Sensor Transmitters (4-20 mA / 0-10V), Automotive Body Electronics (Non-Safety), Educational / Maker Development Boards, Small Appliance Touch-Sensing UI.
Battery-Powered IoT Sensor Nodes
The PIC16LF1707-E/SO is well-suited to battery-powered IoT sensor nodes owing to its XLP (eXtreme Low Power) technology, 1.8V minimum VDD, and deep-sleep currents in the sub-microamp range. The two on-chip op-amps condition low-level sensor signals (thermocouples, resistive bridges) without external op-amp ICs, while the 10-bit ADC performs conversions below 200 us. The CIP architecture (NCO, CWG) handles sensor sampling and interrupt-driven wake-ups while the CPU stays in sleep, extending coin-cell battery life to multi-year horizons in remote installations.
Recommandé
Low-Cost Ceiling Fan / LED Lighting Controllers
The PIC16LF1707-E/SO can drive LED lighting and small motor controllers thanks to its 4-channel CCP/PWM module and 17 I/O pins. Each PWM channel can run at independent frequencies and duty cycles, supporting dimming, RGB color mixing, or triac phase control with the integrated CWG. The op-amp stages enable closed-loop current sensing for constant-current LED drivers, while the 32MHz core times PWM precisely above the audible 20kHz range to prevent motor whine. AEC-Q100 grade variants target automotive interior lighting and dashboard dimming.
Recommandé
Remote Controls and Consumer Appliances
The PIC16LF1707-E/SO suits IR/RF remote controls and household appliances thanks to its low cost, low-power modes, and integrated PWM/ADC. Peripheral Pin Select (PPS) lets designers remap EUSART, I2C, and SPI to available I/O pins after PCB layout changes, reducing respins. Combined with sub-1-uA sleep currents, the part supports coin-cell remotes where battery replacement occurs every 1-3 years. The 32MHz core executes NEC/RC5 IR protocols with adequate timing margin for high-quality remote transmitters.
Recommandé
Industrial Sensor Transmitters (4-20 mA / 0-10V)
The PIC16LF1707-E/SO drives 4-20mA current-loop transmitters in industrial instrumentation, leveraging its 10-bit ADC for sensor acquisition and an on-chip op-amp + PWM + low-pass filter as a DAC for current-loop regulation. The -E extended temperature grade (-40C to +125C) ensures operation in factory-floor environments with wide thermal swings. CWG can modulate the PWM for HART or similar digital overlays atop the analog loop. The wide 1.8V-3.6V supply supports various industrial bus voltages after regulation.
Recommandé
Automotive Body Electronics (Non-Safety)
While the PIC16LF1707-E/SO lacks AEC-Q100 qualification, the extended -40C to +125C temperature range suits under-dash body-electronics applications such as HVAC controls, seat controllers, and trunk modules. The op-amp + ADC chain reads thermistor inputs directly, while PWM drives small actuators and LEDs. Automotive designs should pair the PIC16LF1707-E/SO with an external CAN/LIN transceiver for network connectivity, and follow Microchip's AN1255 for EMI/ESD hardening. For AEC-Q100-grade applications choose automotive-qualified PICs like the PIC16F15356-E/SO.
Recommandé
Educational / Maker Development Boards
The PIC16LF1707-E/SO is a common microcontroller for educational projects and hobbyist development boards due to its 20-pin SOIC ease of breadboarding, MPLAB X IDE support, and rich peripheral set. The XC8 C compiler is free for student use, and Curiosity LPC Demo Boards (DM164137) provide a ZIF-compatible socket for prototype iteration. Students learn ADC, op-amp configurations, PWM, and timer/counter operation with a single-chip, low-cost device - excellent for EE/CE curricula and Maker Faire robotics projects.
Recommandé
Small Appliance Touch-Sensing UI
The PIC16LF1707-E/SO combined with the mTouch technology and integrated op-amps delivers capacitive touch sensing for kitchen appliances, washing machine panels, and thermostat sliders. The two op-amps form the charge-and-hold front-end for a touch button matrix, while the ADC measures discharge times for finger detection. Low-power deep-sleep enables battery-powered or 5V-standby appliances. The PIC16LF1707-E/SO's -40C to +125C range handles appliance thermal stresses near ovens and dryers.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16LF1707-E/SO — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16LF1707-I/SO | PIC16LF1708-I/SO | PIC16LF1507-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SOIC (0.295", 7.50mm) | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same |
| Program Memory (Flash) | 3.5 KB | 3.5 KB | 7 KB (+100%) | 3.5 KB |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 20 MHz |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| On-Chip Op-Amps | 2 | 2 | 2 | 0 (no op-amps) |
| Temperature Grade | -40C to +125C (Extended, -E) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit |
| PWM Channels | 4 (CCP/PWM) | 4 (CCP/PWM) | 4 (CCP/PWM) | 4 (CCP/PWM) |
Principaux différenciateurs
- Two on-chip op-amps in 20-pin SOIC (vs PIC16LF1507-I/SO)
- Peripheral Pin Select (PPS) flexibility (vs PIC16LF1455)
- Higher 32MHz clock vs 20MHz in PIC16LF1507 (vs PIC16LF1507-I/SO)
Notes de conception
The PIC16LF1707-E/SO's XLP technology achieves sub-1 uA deep-sleep current with the CPU halted and peripherals disabled. Designers should configure unused peripherals to OFF in firmware and use the LFINTOSC (31 kHz) during sleep to minimize dynamic current. Estimated: a typical sensor node wakes every 5 s for 50 ms at 32 MHz IDD ~3 mA; averaging across 5 s cycles gives ~30 uA average, supporting 3+ years of operation from a 240 mAh coin cell.
Place a 100nF decoupling capacitor within 5 mm of the VDD pin (pin 18) and VSS (pin 20) to suppress switching noise from the core. Add a bulk 1-10 uF tantalum or ceramic capacitor near the supply entry point for transient suppression. The exposed VSS pin doubles as the heat-sinking path; ensure the GND copper pour is unbroken under the IC to provide thermal dissipation and reference stability for the ADC.
The PIC16LF1707-E/SO's pin 3 (RA3/MCLR) functions as Master Clear when configuration bit MCLRE=1. If MCLR is disabled, that pin becomes a dedicated I/O (RA3). Programming voltage (VPP) on RA3 must reach 8V-9V during ICSP - never drive high-current loads on this pin if you intend to use ICSP. Also, the on-chip op-amps share pins with ADC inputs; design firmware to disable the op-amp before switching the pin to ADC mode to avoid signal contention.
Informations de conformité
RoHS and REACH compliant per Microchip product page and distributor datasheets (Heisener, DigiKey, Mouser 2026 listings). Not AEC-Q100 qualified - the standard PIC16LF1707-E/SO targets industrial extended temperature; choose AEC-Q100 grade parts such as PIC16F15356 for automotive.
