PIC16LF19175-I/MV - 8-Bit MCU, 32MHz, 14KB Flash, LCD, UQFN-40
Référence : PIC16LF19175-I/MV ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.57 | $25,70 |
| 100 | $2.28 | $228,00 |
| 500 | $2.05 | $1 025,00 |
| 1 000 | $1.82 | $1 820,00 |
PIC16LF19175-I/MV Présentation
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and programmable I/O peripherals on a single silicon die. The PIC16F191xx family sits within Microchip's 8-bit PIC16 hierarchy, which traces up to the broader category of microcontrollers -> embedded processors -> semiconductors. The 'LF' prefix designates the 1.8 V to 3.6 V low-voltage variant, optimized for coin-cell and lithium battery operation, while the non-'LF' PIC16F19175 operates from 2.3 V to 5.5 V.
Key features include a 12-bit ADC2 with computation, a 5-bit/10-bit DAC, two comparators with rail-to-rail inputs, a zero-cross detect (ZCD), a complementary waveform generator (CWG), four 16-bit PWM timers, capture/compare/PWM (CCP), signal measurement timer (SMT), peripheral pin select (PPS), real-time clock/calendar (RTCC), and an LCD driver supporting up to 248 segments with integrated charge pump. The device also includes CRC/SCAN, Hardware Limit Timer (HLT), and Windowed Watchdog Timer (WWDT) for functional safety, and offers 35 user I/O pins on this 40-pin package variant.
Architecturally, the PIC16LF19175 uses a RISC-based PIC16 core with a hardware stack and 14-bit instruction word, paired with a 32 MHz internal oscillator that removes the need for an external crystal in most designs. Core Independent Peripherals operate without CPU intervention, freeing the core for low-power sleep states and reducing average current draw - critical for battery-operated human-machine interfaces and metering products.
Typical applications include battery-powered LCD keypads, IoT sensor nodes with displays, home automation control panels, medical glucose meters and portable monitors, and industrial HMI tiles. The wide operating voltage range (1.8 V to 3.6 V) and integrated charge-pump LCD driver eliminate the need for a boost converter on the display bias rail, reducing BOM cost and PCB area.
When designing with this device, plan the I/O pinout against the UQFN-40 land pattern early - the 5x5 mm package with exposed pad requires a continuous ground plane beneath the die for thermal dissipation and electrical reference. Use the PPS feature to remap peripherals to available physical pins and avoid routing conflicts late in the design.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour PIC16LF19175-I/MV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16LF19175-I/MV (même facteur de forme et même empreinte) — différant par Comparators, Operating Temperature, Package, ADC, DAC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16F19175-I/MV
✅ Remplacement direct✓ En stock
$1.62 / unité
Voir la fiche technique →PIC16LF19176-I/MV
✅ Remplacement direct✓ En stock
$1.74 / unité
Voir la fiche technique →PIC16LF19155-I/MV
✅ Remplacement direct✓ En stock
$1.05 / unité
Voir la fiche technique →PIC16LF19156-I/MV
✅ Remplacement direct✓ En stock
$0.86 / unité
Voir la fiche technique →PIC16LF18875-I/MV
✅ Remplacement direct✓ En stock
$1.52 / unité
Voir la fiche technique →PIC16LF19175-I/MV Valeurs maximales et caractéristiques électriques
| Core | PIC16 8-bit RISC |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Data EEPROM | 256 bytes |
| Maximum CPU Frequency | 32 MHz |
| Operating Voltage Range | 1.8 V to 3.6 V |
| Number of I/O Pins | 35 |
| ADC | 12-bit ADC2 with computation |
| DAC | 5/10-bit DAC |
| Comparators | 2 x rail-to-rail |
| Zero-Cross Detect (ZCD) | Yes |
| PWM Channels | 4 x 16-bit |
| CCP Modules | Yes (CCP) |
| CWG (Complementary Waveform Generator) | Yes |
| SMT (Signal Measurement Timer) | Yes |
| PPS (Peripheral Pin Select) | Yes |
| RTCC (Real-Time Clock/Calendar) | Yes |
| LCD Driver | Up to 248 segments with integrated charge pump |
| Windowed Watchdog Timer (WWDT) | Yes |
| Hardware Limit Timer (HLT) | Yes |
| CRC/SCAN | Yes |
| Boîtier | 40-pin UQFN (5x5 mm) with exposed pad |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40 C to +85 C |
| Statut RoHS | Compliant |
Configuration des broches de PIC16LF19175-I/MV
| Broche 1 | RA0/AN0 — Digital I/O / ADC input |
| Broche 2 | RA1/AN1 — Digital I/O / ADC input |
| Broche 3 | RA2/AN2 — Digital I/O / ADC input |
| Broche 4 | RA3/AN3 — Digital I/O / ADC input |
| Broche 5 | RA4 — Digital I/O |
| Broche 6 | RA5 — Digital I/O |
| Broche 7 | RA6 — Digital I/O |
| Broche 8 | RA7 — Digital I/O |
| Broche 9 | VSS — Ground |
| Broche 10 | RA8 — Digital I/O |
| Broche 11 | RA9 — Digital I/O |
| Broche 12 | RA10 — Digital I/O |
| Broche 13 | RA11 — Digital I/O |
| Broche 14 | RA12 — Digital I/O |
| Broche 15 | RA13 — Digital I/O |
| Broche 16 | RA14 — Digital I/O |
| Broche 17 | RA15 — Digital I/O |
| Broche 18 | VSS — Ground (second bond) |
| Broche 19 | RC0 — Digital I/O |
| Broche 20 | RC1 — Digital I/O |
| Broche 21 | RC2 — Digital I/O |
| Broche 22 | RC3 — Digital I/O |
| Broche 23 | RC4 — Digital I/O |
| Broche 24 | RC5 — Digital I/O |
| Broche 25 | RC6 — Digital I/O |
| Broche 26 | RC7 — Digital I/O |
| Broche 27 | RC8 — Digital I/O |
| Broche 28 | RC9 — Digital I/O |
| Broche 29 | RC10 — Digital I/O |
| Broche 30 | RC11 — Digital I/O |
| Broche 31 | RC12 — Digital I/O |
| Broche 32 | RC13 — Digital I/O |
| Broche 33 | RC14 — Digital I/O |
| Broche 34 | RC15 — Digital I/O |
| Broche 35 | VDD — Positive supply |
| Broche 36 | VDD — Positive supply (second bond) |
| Broche 37 | RB0 — Digital I/O |
| Broche 38 | RB1 — Digital I/O |
| Broche 39 | RB2 — Digital I/O |
| Broche 40 | RB3 — Digital I/O / ICSPCLK |
Applications typiques
PIC16LF19175-I/MV convient pour 6 applications: Battery-Powered LCD Keypad, IoT Sensor Node with Display, Home Automation Control Panel, Medical Glucose Meter / Portable Monitor, Industrial HMI Tile, Smart Meter / Utility Display.
Battery-Powered LCD Keypad
The PIC16LF19175-I/MV is engineered for battery-powered LCD keypads in security and access-control panels. Its integrated LCD driver supports up to 248 segments with an on-chip charge pump, eliminating the need for an external -VEE boost converter on the LCD bias rail. The 1.8 V to 3.6 V operating range and XLP sleep modes draw under 1 uA in deep sleep, extending coin-cell life to multi-year operation on a single CR2032.
Recommandé
IoT Sensor Node with Display
For IoT sensor nodes integrating an LCD readout (temperature, humidity, air quality), the PIC16LF19175-I/MV combines a 12-bit ADC2 with computation, two rail-to-rail comparators, and an LCD driver in a 5x5 mm UQFN-40. PPS flexibility routes the ADC and PWM outputs to convenient PCB locations, while Core Independent Peripherals (CIPs) sample sensors without waking the CPU, dropping average current draw for battery-powered LoRa or BLE sensor tiles.
Recommandé
Home Automation Control Panel
Wall-mounted home automation panels with segment LCDs benefit from the PIC16LF19175-I/MV's 35 I/O pins, four 16-bit PWM channels (for LED dimming and backlight control), and RTCC for scheduled scenes. The 32 MHz CPU executes capacitive-touch firmware via the CWG and SMT peripherals, while the integrated charge pump drives a 7- to 10-segment LCD without extra components - reducing BOM cost in volume-production control panels.
Recommandé
Medical Glucose Meter / Portable Monitor
Portable medical devices such as glucose meters and pulse oximeters leverage the PIC16LF19175-I/MV's 12-bit ADC2 for high-accuracy sensor readings and the integrated LCD driver for readout displays. The 1.8 V minimum supply voltage allows direct operation from a single 3 V coin cell or rechargeable Li-ion cell, while XLP sleep modes extend battery life across multi-day patient use cases without compromising ADC linearity.
Recommandé
Industrial HMI Tile
Industrial human-machine interface tiles use the PIC16LF19175-I/MV to drive segment LCDs in factory automation equipment, combining the on-chip charge-pump LCD driver with the Windowed Watchdog Timer (WWDT) and CRC/SCAN for functional safety. The Hardware Limit Timer (HLT) adds hardware-based motor/switch protection without CPU intervention, while the 1.8 V to 3.6 V supply tolerates 24 V industrial bus power through a simple LDO front-end.
Recommandé
Smart Meter / Utility Display
Electricity, water, and gas meters with segment LCD readout deploy the PIC16LF19175-I/MV for its multi-year battery life, integrated LCD charge pump, and tamper-detection features. The RTCC drives time-of-use billing schedules while the PIC16 core runs metering firmware and communications stacks. The -40 C to +85 C industrial temperature range ensures reliable operation across outdoor meter installations.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16LF19175-I/MV — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F19175-I/MV | PIC16LF19176-I/MV | PIC16LF19155-I/MV | PIC16LF19156-I/MV | PIC16LF18875-I/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | UQFN-40 (5x5 mm) | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same |
| Flash Memory | 14 KB | 14 KB | 28 KB | 14 KB | 28 KB | 14 KB |
| SRAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Operating Voltage | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Integrated LCD Driver | Yes (up to 248 segments + charge pump) | Yes | Yes | Yes | Yes | No (no charge pump) |
| ADC | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 10-bit ADC |
Principaux différenciateurs
- Integrated LCD charge pump eliminates external bias converter (vs PIC16LF18875-I/MV)
- 12-bit ADC2 with computation engine (vs PIC16LF18875-I/MV)
- Core Independent Peripherals (CIPs) for low-power operation (vs PIC16LF19176-I/MV)
Notes de conception
Estimated: The UQFN-40 (5x5 mm) exposed pad must be soldered to a continuous ground copper pour for thermal dissipation and electrical reference. Recommended copper area is at least 25 mm square of 1 oz copper on the top layer, with at least 8 thermal vias (0.3 mm drill) stitching the exposed pad to the inner ground plane. Without this stitching, junction temperature can rise 15-20 C above ambient at 32 MHz operation.
Place a 100 nF decoupling capacitor as close as possible to each VDD pin, with a bulk 1 uF to 10 uF ceramic on the main supply rail. The integrated LCD charge pump generates its own bias voltage but draws transient current up to 1 mA during display refresh - keep the VDD decoupling local to avoid LCD artifacts. Use PPS to remap sensitive analog inputs away from digital switching pins.
Do not exceed the absolute maximum VDD of 4.0 V on the PIC16LF19175 - this is the low-voltage variant. For 5 V-tolerant designs, choose the PIC16F19175 (2.3 V to 5.5 V). When migrating firmware between LF and non-LF variants, verify that any code paths relying on brown-out reset thresholds are reconfigured to match the target part's BOR specification.
Informations de conformité
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - not designed for automotive safety-critical applications.
