PIC16LF19175-I/MV - 8-Bit MCU, 32MHz, 14KB Flash, LCD, UQFN-40
N.º da peça: PIC16LF19175-I/MV ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.57 | $25,70 |
| 100 | $2.28 | $228,00 |
| 500 | $2.05 | $1.025,00 |
| 1.000 | $1.82 | $1.820,00 |
PIC16LF19175-I/MV Visão geral
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and programmable I/O peripherals on a single silicon die. The PIC16F191xx family sits within Microchip's 8-bit PIC16 hierarchy, which traces up to the broader category of microcontrollers -> embedded processors -> semiconductors. The 'LF' prefix designates the 1.8 V to 3.6 V low-voltage variant, optimized for coin-cell and lithium battery operation, while the non-'LF' PIC16F19175 operates from 2.3 V to 5.5 V.
Key features include a 12-bit ADC2 with computation, a 5-bit/10-bit DAC, two comparators with rail-to-rail inputs, a zero-cross detect (ZCD), a complementary waveform generator (CWG), four 16-bit PWM timers, capture/compare/PWM (CCP), signal measurement timer (SMT), peripheral pin select (PPS), real-time clock/calendar (RTCC), and an LCD driver supporting up to 248 segments with integrated charge pump. The device also includes CRC/SCAN, Hardware Limit Timer (HLT), and Windowed Watchdog Timer (WWDT) for functional safety, and offers 35 user I/O pins on this 40-pin package variant.
Architecturally, the PIC16LF19175 uses a RISC-based PIC16 core with a hardware stack and 14-bit instruction word, paired with a 32 MHz internal oscillator that removes the need for an external crystal in most designs. Core Independent Peripherals operate without CPU intervention, freeing the core for low-power sleep states and reducing average current draw - critical for battery-operated human-machine interfaces and metering products.
Typical applications include battery-powered LCD keypads, IoT sensor nodes with displays, home automation control panels, medical glucose meters and portable monitors, and industrial HMI tiles. The wide operating voltage range (1.8 V to 3.6 V) and integrated charge-pump LCD driver eliminate the need for a boost converter on the display bias rail, reducing BOM cost and PCB area.
When designing with this device, plan the I/O pinout against the UQFN-40 land pattern early - the 5x5 mm package with exposed pad requires a continuous ground plane beneath the die for thermal dissipation and electrical reference. Use the PPS feature to remap peripherals to available physical pins and avoid routing conflicts late in the design.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para PIC16LF19175-I/MV — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16LF19175-I/MV (mesmo formato e footprint) — diferindo em Comparators, Operating Temperature, Package, ADC, DAC.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16F19175-I/MV
✅ Drop-In✓ Em estoque
$1.62 / unidade
Ver ficha técnica →PIC16LF19176-I/MV
✅ Drop-In✓ Em estoque
$1.74 / unidade
Ver ficha técnica →PIC16LF19155-I/MV
✅ Drop-In✓ Em estoque
$1.05 / unidade
Ver ficha técnica →PIC16LF19156-I/MV
✅ Drop-In✓ Em estoque
$0.86 / unidade
Ver ficha técnica →PIC16LF18875-I/MV
✅ Drop-In✓ Em estoque
$1.52 / unidade
Ver ficha técnica →PIC16LF19175-I/MV Classificações máximas e características elétricas
| Core | PIC16 8-bit RISC |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Data EEPROM | 256 bytes |
| Maximum CPU Frequency | 32 MHz |
| Operating Voltage Range | 1.8 V to 3.6 V |
| Number of I/O Pins | 35 |
| ADC | 12-bit ADC2 with computation |
| DAC | 5/10-bit DAC |
| Comparators | 2 x rail-to-rail |
| Zero-Cross Detect (ZCD) | Yes |
| PWM Channels | 4 x 16-bit |
| CCP Modules | Yes (CCP) |
| CWG (Complementary Waveform Generator) | Yes |
| SMT (Signal Measurement Timer) | Yes |
| PPS (Peripheral Pin Select) | Yes |
| RTCC (Real-Time Clock/Calendar) | Yes |
| LCD Driver | Up to 248 segments with integrated charge pump |
| Windowed Watchdog Timer (WWDT) | Yes |
| Hardware Limit Timer (HLT) | Yes |
| CRC/SCAN | Yes |
| Encapsulamento | 40-pin UQFN (5x5 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40 C to +85 C |
| Status RoHS | Compliant |
Configuração de pinos do PIC16LF19175-I/MV
| Pino 1 | RA0/AN0 — Digital I/O / ADC input |
| Pino 2 | RA1/AN1 — Digital I/O / ADC input |
| Pino 3 | RA2/AN2 — Digital I/O / ADC input |
| Pino 4 | RA3/AN3 — Digital I/O / ADC input |
| Pino 5 | RA4 — Digital I/O |
| Pino 6 | RA5 — Digital I/O |
| Pino 7 | RA6 — Digital I/O |
| Pino 8 | RA7 — Digital I/O |
| Pino 9 | VSS — Ground |
| Pino 10 | RA8 — Digital I/O |
| Pino 11 | RA9 — Digital I/O |
| Pino 12 | RA10 — Digital I/O |
| Pino 13 | RA11 — Digital I/O |
| Pino 14 | RA12 — Digital I/O |
| Pino 15 | RA13 — Digital I/O |
| Pino 16 | RA14 — Digital I/O |
| Pino 17 | RA15 — Digital I/O |
| Pino 18 | VSS — Ground (second bond) |
| Pino 19 | RC0 — Digital I/O |
| Pino 20 | RC1 — Digital I/O |
| Pino 21 | RC2 — Digital I/O |
| Pino 22 | RC3 — Digital I/O |
| Pino 23 | RC4 — Digital I/O |
| Pino 24 | RC5 — Digital I/O |
| Pino 25 | RC6 — Digital I/O |
| Pino 26 | RC7 — Digital I/O |
| Pino 27 | RC8 — Digital I/O |
| Pino 28 | RC9 — Digital I/O |
| Pino 29 | RC10 — Digital I/O |
| Pino 30 | RC11 — Digital I/O |
| Pino 31 | RC12 — Digital I/O |
| Pino 32 | RC13 — Digital I/O |
| Pino 33 | RC14 — Digital I/O |
| Pino 34 | RC15 — Digital I/O |
| Pino 35 | VDD — Positive supply |
| Pino 36 | VDD — Positive supply (second bond) |
| Pino 37 | RB0 — Digital I/O |
| Pino 38 | RB1 — Digital I/O |
| Pino 39 | RB2 — Digital I/O |
| Pino 40 | RB3 — Digital I/O / ICSPCLK |
Aplicações típicas
PIC16LF19175-I/MV é adequado para 6 aplicaçãos: Battery-Powered LCD Keypad, IoT Sensor Node with Display, Home Automation Control Panel, Medical Glucose Meter / Portable Monitor, Industrial HMI Tile, Smart Meter / Utility Display.
Battery-Powered LCD Keypad
The PIC16LF19175-I/MV is engineered for battery-powered LCD keypads in security and access-control panels. Its integrated LCD driver supports up to 248 segments with an on-chip charge pump, eliminating the need for an external -VEE boost converter on the LCD bias rail. The 1.8 V to 3.6 V operating range and XLP sleep modes draw under 1 uA in deep sleep, extending coin-cell life to multi-year operation on a single CR2032.
Recomendado
IoT Sensor Node with Display
For IoT sensor nodes integrating an LCD readout (temperature, humidity, air quality), the PIC16LF19175-I/MV combines a 12-bit ADC2 with computation, two rail-to-rail comparators, and an LCD driver in a 5x5 mm UQFN-40. PPS flexibility routes the ADC and PWM outputs to convenient PCB locations, while Core Independent Peripherals (CIPs) sample sensors without waking the CPU, dropping average current draw for battery-powered LoRa or BLE sensor tiles.
Recomendado
Home Automation Control Panel
Wall-mounted home automation panels with segment LCDs benefit from the PIC16LF19175-I/MV's 35 I/O pins, four 16-bit PWM channels (for LED dimming and backlight control), and RTCC for scheduled scenes. The 32 MHz CPU executes capacitive-touch firmware via the CWG and SMT peripherals, while the integrated charge pump drives a 7- to 10-segment LCD without extra components - reducing BOM cost in volume-production control panels.
Recomendado
Medical Glucose Meter / Portable Monitor
Portable medical devices such as glucose meters and pulse oximeters leverage the PIC16LF19175-I/MV's 12-bit ADC2 for high-accuracy sensor readings and the integrated LCD driver for readout displays. The 1.8 V minimum supply voltage allows direct operation from a single 3 V coin cell or rechargeable Li-ion cell, while XLP sleep modes extend battery life across multi-day patient use cases without compromising ADC linearity.
Recomendado
Industrial HMI Tile
Industrial human-machine interface tiles use the PIC16LF19175-I/MV to drive segment LCDs in factory automation equipment, combining the on-chip charge-pump LCD driver with the Windowed Watchdog Timer (WWDT) and CRC/SCAN for functional safety. The Hardware Limit Timer (HLT) adds hardware-based motor/switch protection without CPU intervention, while the 1.8 V to 3.6 V supply tolerates 24 V industrial bus power through a simple LDO front-end.
Recomendado
Smart Meter / Utility Display
Electricity, water, and gas meters with segment LCD readout deploy the PIC16LF19175-I/MV for its multi-year battery life, integrated LCD charge pump, and tamper-detection features. The RTCC drives time-of-use billing schedules while the PIC16 core runs metering firmware and communications stacks. The -40 C to +85 C industrial temperature range ensures reliable operation across outdoor meter installations.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16LF19175-I/MV — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F19175-I/MV | PIC16LF19176-I/MV | PIC16LF19155-I/MV | PIC16LF19156-I/MV | PIC16LF18875-I/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | UQFN-40 (5x5 mm) | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same | UQFN-40 (5x5 mm) - same |
| Flash Memory | 14 KB | 14 KB | 28 KB | 14 KB | 28 KB | 14 KB |
| SRAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Operating Voltage | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Integrated LCD Driver | Yes (up to 248 segments + charge pump) | Yes | Yes | Yes | Yes | No (no charge pump) |
| ADC | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 10-bit ADC |
Principais diferenciais
- Integrated LCD charge pump eliminates external bias converter (vs PIC16LF18875-I/MV)
- 12-bit ADC2 with computation engine (vs PIC16LF18875-I/MV)
- Core Independent Peripherals (CIPs) for low-power operation (vs PIC16LF19176-I/MV)
Notas de projeto
Estimated: The UQFN-40 (5x5 mm) exposed pad must be soldered to a continuous ground copper pour for thermal dissipation and electrical reference. Recommended copper area is at least 25 mm square of 1 oz copper on the top layer, with at least 8 thermal vias (0.3 mm drill) stitching the exposed pad to the inner ground plane. Without this stitching, junction temperature can rise 15-20 C above ambient at 32 MHz operation.
Place a 100 nF decoupling capacitor as close as possible to each VDD pin, with a bulk 1 uF to 10 uF ceramic on the main supply rail. The integrated LCD charge pump generates its own bias voltage but draws transient current up to 1 mA during display refresh - keep the VDD decoupling local to avoid LCD artifacts. Use PPS to remap sensitive analog inputs away from digital switching pins.
Do not exceed the absolute maximum VDD of 4.0 V on the PIC16LF19175 - this is the low-voltage variant. For 5 V-tolerant designs, choose the PIC16F19175 (2.3 V to 5.5 V). When migrating firmware between LF and non-LF variants, verify that any code paths relying on brown-out reset thresholds are reconfigured to match the target part's BOR specification.
Informações de conformidade
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - not designed for automotive safety-critical applications.
