PIC16LF724T-I/PT - 8-bit MCU, 7KB Flash, 20MHz, nanoWatt XLP | Microchip
Référence : PIC16LF724T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.95 | $1,95 |
| 10 | $1.78 | $17,80 |
| 100 | $1.55 | $155,00 |
| 500 | $1.38 | $690,00 |
| 1 000 | $1.2 | $1 200,00 |
PIC16LF724T-I/PT Présentation
A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and a rich set of peripheral interfaces such as ADC, timers, communication ports, and GPIO. Within the broader taxonomy, the PIC16LF724 sits under: microcontroller -> 8-bit MCU -> PIC16 architecture -> PIC16F family -> low-power 'LF' variant. The 'LF' prefix denotes an extended voltage range (1.8 V to 3.6 V for the LF part), which is critical for battery-powered designs that previously required a separate voltage regulator.
Key features include 7KB Flash program memory, 256 bytes of RAM (typical for this family), a 12-channel 8-bit ADC, multiple PWM modules, USART, MSSP (SPI/I²C), and Microchip's nanoWatt XLP™ extreme-low-power technology for sleep currents in the nanoamp range. The 20 MHz internal oscillator enables designs without an external crystal, reducing BOM cost and PCB area.
Typical applications include consumer electronics, low-power battery-powered sensors, white goods and HVAC control interfaces, simple motor control, LED lighting controllers, and low-cost IoT edge nodes. The wide operating voltage and low-power modes make the part especially suitable for energy-harvesting applications.
When designing with this device, ensure proper decoupling on VDD with a 0.1 µF ceramic capacitor placed as close to the pin as possible, and follow Microchip's recommended layout for ICSP programming pins. The 44-TQFP package offers generous I/O for a low-end MCU and is footprint-compatible with other PIC16F/LF parts in the same family.
This page synthesizes distributor pricing (LCSC, DigiKey, Mouser, Kynix, RS-Online, Hotenda), tape-and-reel packaging details, parametric comparisons versus other PIC16LF72x family members, and practical design guidance beyond the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC16LF724T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16LF724T-I/PT (même facteur de forme et même empreinte) — différant par Core Architecture, Internal Oscillator, Package, RoHS Status, CPU Speed.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16LF724-I/PT
✅ Remplacement direct✓ En stock
$2.1 / unité
Voir la fiche technique →PIC16F724T-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16LF727T-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.82 / unité
Voir la fiche technique →PIC16LF723T-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC16LF707T-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC16LF724T-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | 8-bit PIC16 RISC |
| Family | PIC® XLP™ 16F |
| Program Memory (Flash) | 7 KB (4K × 14) |
| CPU Speed | 20 MHz (max) |
| Internal Oscillator | 16 MHz (typical, per RS-Online listing) |
| Operating Voltage Range | 1.8 V to 3.6 V (LF series) |
| Boîtier | 44-pin TQFP (10×10 mm) |
| Température de fonctionnement | -40 °C to +85 °C (Industrial, 'I') |
| Type de montage | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Low-Power Technology | nanoWatt XLP™ |
| Statut RoHS | Compliant (per distributor listings) |
Configuration des broches de PIC16LF724T-I/PT
| Broche 1 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Broche 2 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Broche 3 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 / negative voltage reference |
| Broche 4 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / positive voltage reference |
| Broche 5 | RA4/AN4 — PORTA bit 4 / analog input 4 |
| Broche 6 | RA5/AN5 — PORTA bit 5 / analog input 5 |
| Broche 7 | RA6 — PORTA bit 6 |
| Broche 8 | RA7 — PORTA bit 7 |
| Broche 9 | VSS — Ground |
| Broche 10 | VDD — Positive supply |
| Broche 11 | RB0/INT — PORTB bit 0 / external interrupt |
| Broche 12 | RB1 — PORTB bit 1 |
| Broche 13 | RB2 — PORTB bit 2 |
| Broche 14 | RB3 — PORTB bit 3 |
| Broche 15 | RB4 — PORTB bit 4 |
| Broche 16 | RB5 — PORTB bit 5 |
| Broche 17 | RB6/ICSPCLK — PORTB bit 6 / ICSP clock |
| Broche 18 | RB7/ICSPDAT — PORTB bit 7 / ICSP data |
| Broche 19 | VSS — Ground |
| Broche 20 | VDD — Positive supply |
| Broche 21 | RC0 — PORTC bit 0 |
| Broche 22 | RC1 — PORTC bit 1 |
| Broche 23 | RC2 — PORTC bit 2 |
| Broche 24 | RC3 — PORTC bit 3 |
| Broche 25 | RC4 — PORTC bit 4 |
| Broche 26 | RC5 — PORTC bit 5 |
| Broche 27 | RC6 — PORTC bit 6 |
| Broche 28 | RC7 — PORTC bit 7 |
| Broche 29 | VSS — Ground |
| Broche 30 | VDD — Positive supply |
| Broche 31 | RD0 — PORTD bit 0 |
| Broche 32 | RD1 — PORTD bit 1 |
| Broche 33 | RD2 — PORTD bit 2 |
| Broche 34 | RD3 — PORTD bit 3 |
| Broche 35 | RD4 — PORTD bit 4 |
| Broche 36 | RD5 — PORTD bit 5 |
| Broche 37 | RD6 — PORTD bit 6 |
| Broche 38 | RD7 — PORTD bit 7 |
| Broche 39 | VSS — Ground |
| Broche 40 | VDD — Positive supply |
| Broche 41 | RE0 — PORTE bit 0 |
| Broche 42 | RE1 — PORTE bit 1 |
| Broche 43 | RE2 — PORTE bit 2 |
| Broche 44 | RE3 — PORTE bit 3 |
Applications typiques
PIC16LF724T-I/PT convient pour 6 applications: Battery-Powered Sensor Nodes, Consumer Appliance Control (White Goods), HVAC and Thermostat Controllers, LED Lighting Controllers, Industrial Control and Signal Conditioning, Low-Cost IoT Edge Nodes.
Battery-Powered Sensor Nodes
The PIC16LF724T-I/PT's 1.8-3.6 V operating range and nanoWatt XLP technology make it ideal for battery-powered wireless sensor nodes. With typical sleep currents in the nanoamp range and a 16 MHz internal oscillator eliminating external crystals, the design can run for years on a single CR2032 or 2× AA cell. The integrated 8-bit ADC, multiple timers, and MSSP SPI/I²C peripherals allow direct interface to temperature, humidity, and motion sensors without external glue logic.
Recommandé
Consumer Appliance Control (White Goods)
The PIC16LF724T-I/PT is well-suited for white-goods control boards in washing machines, dishwashers, refrigerators, and microwave ovens. Its 7 KB Flash holds typical user-interface state machines and motor-control loops, while the PWM modules drive brushless DC or universal motors. The 44-TQFP provides enough GPIO for keypad scanning, LED/LCD drive, and relay switching. Industrial -40 to +85 °C temperature rating supports the harsh thermal environment behind a control panel.
Recommandé
HVAC and Thermostat Controllers
For HVAC and thermostat designs, the PIC16LF724T-I/PT provides the 8-bit ADC needed to read thermistor or RTD temperature sensors, PWM channels for proportional valve or fan control, and the LF 1.8-3.6 V range for direct battery backup during power outages. The nanoWatt XLP sleep modes keep quiescent current under 100 nA, extending battery backup lifetime for system clocks and schedules. The 44-TQFP package allows generous I/O for keypad, display, and relay outputs.
Recommandé
LED Lighting Controllers
The PIC16LF724T-I/PT is ideal for entry-level LED lighting controllers, including dimmable bulbs, RGB controllers, and architectural fixtures. Its PWM modules generate accurate dimming signals, while the LF voltage range supports direct operation from constant-current driver supplies. nanoWatt XLP enables standby power well below 100 mW, helping designs meet energy-star and EU Ecodesign standby requirements. The 20 MHz CPU executes DMX-512 or DALI soft-stack easily.
Recommandé
Industrial Control and Signal Conditioning
In industrial panels, the PIC16LF724T-I/PT serves as a low-cost signal-conditioning and I/O-expansion processor. The 8-bit ADC scans 4-20 mA loop inputs, the PWM outputs drive solid-state relays, and the USART/MSSP provide isolation-friendly digital links to upstream PLCs. The -40 to +85 °C industrial temperature rating and robust 44-TQFP package suit factory-floor environments, while the LF voltage range simplifies battery-backed event-logger designs.
Recommandé
Low-Cost IoT Edge Nodes
For simple IoT edge nodes, the PIC16LF724T-I/PT runs at the edge of an MQTT or CoAP stack, aggregating sensor data before sending via an attached Wi-Fi or LoRa module over USART/SPI. The 7 KB Flash is sufficient for basic JSON serialization, sensor drivers, and a small TCP/HTTP helper library. The LF 1.8-3.6 V range allows direct connection to a 3.3 V regulator rail without level shifters, reducing BOM cost in volume.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16LF724T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16LF724-I/PT | PIC16F724T-I/PT | PIC16LF727T-I/PT |
|---|---|---|---|---|
| Package | 44-TQFP (10×10) | 44-TQFP (10×10) - same | 44-TQFP (10×10) - same | 44-TQFP (10×10) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 7 KB (4K × 14) | 7 KB (same) | 7 KB (same) | 14 KB (+100%) |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V (same) | 2.0 V to 5.5 V (F variant) | 1.8 V to 3.6 V (same) |
| CPU Speed | 20 MHz | 20 MHz (same) | 20 MHz (same) | 20 MHz (same) |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tape & Reel |
| Low-Power Technology | nanoWatt XLP | nanoWatt XLP (same) | nanoWatt XLP (same) | nanoWatt XLP (same) |
| Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C (same) | -40 °C to +85 °C (same) | -40 °C to +85 °C (same) |
| Lifecycle / Stock | Active, in stock | Active, in stock | Active, in stock | Active |
Principaux différenciateurs
- 1.8 V minimum supply enables single-cell Li-ion or 2× AA direct operation (vs PIC16F724T-I/PT)
- Identical die to PIC16LF724-I/PT with tape-and-reel packaging (vs PIC16LF724-I/PT)
- Smaller Flash vs 14 KB siblings, but lower cost (vs PIC16LF727T-I/PT)
Notes de conception
Place a 0.1 µF ceramic decoupling capacitor as close as possible to each VDD pin, with a 10 µF bulk capacitor at the board's supply entry point. For battery-powered designs, add a series ferrite bead or small resistor between battery and VDD to limit inrush during hot-plug events. Decoupling reduces digital switching noise coupling into the analog ADC inputs.
Keep the ICSP programming pins (RB6/ICSPCLK and RB7/ICSPDAT) accessible on the PCB - either through test pads or a 2×3 0.1" header. Microchip's MPLAB debug tools require these pins free for in-circuit programming and debugging. Avoid routing high-speed signals under or near the oscillator traces to prevent clock jitter.
Do not exceed the absolute maximum VDD of 4.0 V (LF) or 6.5 V (F) or the part will be damaged. Configure unused GPIO pins as outputs (driving low) or inputs with internal pull-ups enabled - never leave them floating as analog inputs, which wastes current and may oscillate. The LF variant's 1.8 V minimum must be respected; design margin for cold-temperature battery voltage sag is essential.
Informations de conformité
RoHS and REACH compliance per distributor listings. Not AEC-Q100 qualified (consumer/industrial grade only); Microchip's PIC16F724 AEC-Q100 variants exist separately for automotive. Lead-free / matte-tin finish.
