PIC17LC752-08I/PT - 8-Bit 8MHz CMOS EPROM MCU, 16KB | Microchip
Référence : PIC17LC752-08I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.1 | $131,00 |
| 100 | $11.85 | $1 185,00 |
| 500 | $10.65 | $5 325,00 |
| 1 000 | $9.55 | $9 550,00 |
PIC17LC752-08I/PT Présentation
A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (ROM/Flash/OTP), volatile data memory (RAM), and a configurable set of peripherals such as timers, A/D converters, communication ports, and interrupt controllers. Within the broader semiconductor taxonomy, the PIC17LC752 belongs to the 8-bit MCU -> microcontroller -> embedded processor -> semiconductor hierarchy. The PIC17 family specifically targets higher pin-count, higher-performance 8-bit applications that require more peripherals and I/O than the baseline PIC16 family can offer.
Key features include a 10-bit A/D converter with up to 12 channels, dual capture/compare/PWM modules, a USART port, an SSP port supporting SPI and I2C, hardware multiplication, and a flexible interrupt controller with vectored interrupts. The OTP program memory is one-time programmable, making this part well suited to mature, high-volume production where field firmware updates are not required. The wide 2.5 V to 5.5 V supply range allows operation from regulated 3.3 V rails or directly from a 5 V system bus.
Typical applications include industrial control front-ends, HVAC and appliance controllers, motor control peripheral boards, instrumentation front panels, and embedded sensor hubs where deterministic real-time response matters. The 121 ns single-cycle instruction execution provides predictable interrupt latency that simplifies firmware timing analysis in safety-related control loops.
When designing with this device, ensure the EPROM programming window is correctly handled in production programming equipment and that brown-out and watchdog timer settings are tuned to the application. The industrial (-40C to +85C) temperature grade and the legacy PDIP package make the PIC17LC752-08I/PT primarily suited to through-hole industrial designs.
This page aggregates distributor pricing, drop-in replacement candidates, and practical engineering guidance that is not compiled in the manufacturer datasheet itself.
Alternatives de remplacement direct pour PIC17LC752-08I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC17LC752-08I/PT (même facteur de forme et même empreinte) — différant par Maximum Clock Frequency, I/O Pins, Package, Program Memory Size, Program Memory Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC17LC752-08/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC17LC752T-08I/PT
✅ Remplacement direct✓ En stock
$7.45 / unité
Voir la fiche technique →PIC17C752-08I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC17C752-16I/PT
✅ Remplacement direct✓ En stock
$6.13 / unité
Voir la fiche technique →PIC17C752-33I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC17LC756A-08I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$12.3 / unité
Voir la fiche technique →PIC17LC752-08I/PT Valeurs maximales et caractéristiques électriques
| Architecture | PIC 8-bit RISC |
| Instruction Set | 58 single-word instructions |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 16 KB (8K x 16) |
| RAM Size | 678 bytes |
| Fréquence d'horloge maximale | 33 MHz (external input) |
| Internal CPU Clock | 8 MHz (8 MHz part suffix) |
| Instruction Cycle | 121 ns (single-cycle) |
| Tension d'alimentation | 2.5 V to 5.5 V |
| I/O Pins | 33 |
| Communication Peripherals | USART, SSP (SPI/I2C) |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Boîtier | PDIP-40 (PT) |
| Type de montage | Through-Hole (DIP) |
| Largeur du bus de données | 16-bit (instruction) / 8-bit (data) |
Configuration des broches de PIC17LC752-08I/PT
| Broche 1 | RA0/AN0 — Port A bit 0 / Analog input 0 |
| Broche 2 | RA1/AN1 — Port A bit 1 / Analog input 1 |
| Broche 3 | RA2/AN2 — Port A bit 2 / Analog input 2 |
| Broche 4 | RA3/AN3 — Port A bit 3 / Analog input 3 |
| Broche 5 | RA4/AN4/T0CKI — Port A bit 4 / Analog input 4 / Timer0 clock input |
| Broche 6 | RA5/AN5 — Port A bit 5 / Analog input 5 |
| Broche 7 | RA6/OSC2 — Port A bit 6 / Oscillator output |
| Broche 8 | RA7/OSC1 — Port A bit 7 / Oscillator input |
| Broche 9 | MCLR/VPP — Master clear / Programming voltage |
| Broche 10 | VSS — Ground |
| Broche 11 | VDD — Positive supply voltage |
| Broche 12 | RB0/INT0 — Port B bit 0 / External interrupt 0 |
| Broche 13 | RB1/INT1 — Port B bit 1 / External interrupt 1 |
| Broche 14 | RB2/INT2 — Port B bit 2 / External interrupt 2 |
| Broche 15 | RB3 — Port B bit 3 |
| Broche 16 | RB4 — Port B bit 4 |
| Broche 17 | RB5 — Port B bit 5 |
| Broche 18 | RB6 — Port B bit 6 |
| Broche 19 | RB7 — Port B bit 7 |
| Broche 20 | RC0 — Port C bit 0 |
| Broche 21 | RC1 — Port C bit 1 |
| Broche 22 | RC2/CCP1 — Port C bit 2 / Capture/Compare/PWM 1 |
| Broche 23 | RC3/CCP2 — Port C bit 3 / Capture/Compare/PWM 2 |
| Broche 24 | RC4 — Port C bit 4 |
| Broche 25 | RC5 — Port C bit 5 |
| Broche 26 | RC6/TX/CK — Port C bit 6 / USART TX / clock |
| Broche 27 | RC7/RX/DT — Port C bit 7 / USART RX / data |
| Broche 28 | RD0 — Port D bit 0 |
| Broche 29 | RD1 — Port D bit 1 |
| Broche 30 | RD2 — Port D bit 2 |
| Broche 31 | RD3 — Port D bit 3 |
| Broche 32 | RD4 — Port D bit 4 |
| Broche 33 | RD5 — Port D bit 5 |
| Broche 34 | RD6 — Port D bit 6 |
| Broche 35 | RD7 — Port D bit 7 |
| Broche 36 | RE0/AN6 — Port E bit 0 / Analog input 6 |
| Broche 37 | RE1/AN7 — Port E bit 1 / Analog input 7 |
| Broche 38 | RE2/AN8 — Port E bit 2 / Analog input 8 |
| Broche 39 | VSS — Ground |
| Broche 40 | VDD — Positive supply voltage |
Applications typiques
PIC17LC752-08I/PT convient pour 6 applications: Industrial Control Front-End, HVAC and Appliance Controller, Motor Control Peripheral Board, Instrumentation Front Panel, Embedded Sensor Hub, Security and Access Control Panel.
Industrial Control Front-End
The PIC17LC752-08I/PT's 8 MIPS throughput, 33 I/O lines, and integrated 10-bit A/D converter make it well suited to industrial control front-end boards where deterministic real-time response is critical. The 121 ns instruction cycle provides predictable interrupt latency, simplifying firmware timing analysis in safety-related control loops. Operating from a 2.5 V to 5.5 V rail allows direct connection to common 24 V-buck-derived 5 V or 3.3 V industrial power supplies without additional level shifters. The wide -40C to +85C industrial temperature grade handles factory floor thermal stress.
Recommandé
HVAC and Appliance Controller
The PIC17LC752-08I/PT is well matched to HVAC and appliance controllers where multiple sensors, triac drivers, and user interfaces must be coordinated. The 10-bit ADC handles thermistor and pressure-sensor inputs, while the 33 I/O lines drive relay coils, TRIAC optocouplers, and display multiplexers. The OTP EPROM memory is sufficient for fixed-function firmware that does not require field updates, lowering per-unit cost in volume appliance production.
Recommandé
Motor Control Peripheral Board
The PIC17LC752-08I/PT's Capture/Compare/PWM modules and high-throughput core suit brushed DC and stepper motor peripheral boards. PWM channels drive H-bridge MOSFET gates while the ADC samples current-sense amplifiers for closed-loop torque control. The 8 MIPS performance ensures PWM loops execute without jitter, and the wide supply range simplifies integration with 5 V gate driver supplies typical in industrial motor drives.
Recommandé
Instrumentation Front Panel
The PIC17LC752-08I/PT drives front-panel keypads, LCD or VFD displays, and rotary encoders on bench-top instruments. Its 33 I/O lines handle matrix keypads and parallel display interfaces, while the USART connects to main DSP or FPGA signal-processing boards. The 10-bit ADC reads front-panel potentiometers and analog reference voltages, and the 2.5 V to 5.5 V range accommodates instrumentation-grade power rails.
Recommandé
Embedded Sensor Hub
The PIC17LC752-08I/PT acts as a sensor hub aggregating I2C and SPI sensor data and forwarding it over USART to a host controller. The integrated SSP port supports both SPI and I2C masters, enabling direct connection to accelerometers, temperature sensors, and EEPROMs without glue logic. The 678-byte RAM buffers sensor frames, and the deterministic instruction cycle preserves sensor timing integrity.
Recommandé
Security and Access Control Panel
The PIC17LC752-08I/PT handles keypad entry, RFID reader interfaces, and alarm loop monitoring in access control panels. Its 33 I/O lines drive relay outputs for door strikes, read magnetic contact inputs, and interface to Wiegand-format card readers. OTP EPROM prevents firmware tampering, and the industrial temperature grade ensures reliability in unheated entry vestibules and outdoor enclosures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC17LC752-08I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC17LC752-08/PT | PIC17LC752T-08I/PT | PIC17C752-08I/PT | PIC17C752-16I/PT | PIC17C752-33I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | PDIP-40 (PT) | PDIP-40 (PT) - same | PDIP-40 (PT) - same | PDIP-40 (PT) - same | PDIP-40 (PT) - same | PDIP-40 (PT) - same |
| Program Memory | 16 KB OTP EPROM | 16 KB OTP EPROM | 16 KB OTP EPROM | 16 KB OTP EPROM | 16 KB OTP EPROM | 16 KB OTP EPROM |
| CPU Clock Speed | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 16 MHz | 33 MHz |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| RAM Size | 678 bytes | 678 bytes | 678 bytes | 678 bytes | 678 bytes | 678 bytes |
Principaux différenciateurs
- Wide 2.5 V to 5.5 V supply voltage range (vs PIC17C752-08I/PT)
- 8 MHz CPU clock with 121 ns instruction cycle (vs PIC17C752-33I/PT)
- Industrial -40C to +85C temperature grade (vs PIC17LC752-08/PT)
Notes de conception
Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of each VDD pin (pins 11 and 40) and add a bulk 10 uF tantalum or aluminum polymer capacitor at the board entry point. The PIC17LC752 has dual VDD/VSS pin pairs to reduce digital switching noise injection into analog sections. Keep the analog VDD/VSS pair and digital VDD/VSS pair star-grounded at a single point near the MCU to preserve A/D converter accuracy.
Route the OSC1/OSC2 crystal traces as short, symmetric loops with the load capacitors placed close to the MCU. For 33 MHz operation, use a fundamental-mode crystal with ESR under 60 ohm. Keep high-current switching traces (TRIAC gate drives, relay coils) routed away from the analog input pins (AN0-AN8) to minimize ADC sampling crosstalk.
Do not apply MCLR/VPP (pin 9) above VDD + 0.3 V during normal operation - this pin is used for in-circuit programming and can damage the part if driven by an external logic signal accidentally. Always include a 10 kohm pull-up on MCLR and a 100 nF decoupling cap to VDD at the MCLR pin. Also ensure brown-out reset is enabled in the configuration word to prevent undefined execution at low VDD.
Estimated: at maximum CPU activity (8 MIPS, VDD = 5.5 V), power dissipation is approximately 30-50 mW, well within the PDIP-40 package's thermal limit. Junction temperature rise above ambient is roughly 5 C/W x 0.05 W = 0.25 C, negligible. No heatsink or thermal management is required for normal operation even in sealed enclosures at +85C ambient.
Informations de conformité
RoHS, REACH, lead-free, and halogen-free status were not specified in the retrieved web data and are marked [DATA_NEEDED] in the specs array. AEC-Q100 is not applicable for this industrial-grade MCU - it is not qualified for automotive applications. Contact Microchip directly for the latest compliance certificates.
