PIC18F27Q10-I/STX - 8-Bit 64MHz 128KB Flash MCU | Microchip
Référence : PIC18F27Q10-I/STX ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.62 | $26,20 |
| 100 | $2.4 | $240,00 |
| 500 | $2.18 | $1 090,00 |
| 1 000 | $1.96 | $1 960,00 |
| 3 000 | $1.74 | $5 220,00 |
PIC18F27Q10-I/STX Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage, SRAM for data, EEPROM for non-volatile data), and programmable peripherals into one IC. PIC18 microcontrollers are 8-bit Harvard-architecture MCUs from Microchip that combine high computational performance at an economical price point with extensive peripheral integration, including timers, communication interfaces (UART, SPI, I2C), and analog-to-digital converters. The Q10 family specifically extends the PIC18 line with intelligent analog (zero-cross detect, op amps, DACs), configurable logic cells, and 5V operation for improved noise immunity in industrial sensor-node designs.
Key differentiating features include the integrated CLCs that let designers create custom hardware-based logic functions without external glue logic, the 5V-tolerant I/O for direct interface with industrial sensors, and the intelligent analog peripherals including a 12-bit ADC, DAC, op-amps, and zero-cross detect. The 128 KB Flash supports 10,000+ erase/write cycles for field-upgradable firmware, while 1 KB of EEPROM provides robust non-volatile data storage. The 64 MHz internal oscillator eliminates external crystals in cost-sensitive designs.
Typical applications include industrial sensor nodes with analog signal conditioning, building automation controllers, low-power IoT edge devices, appliance control boards, and USB/HID human-interface devices. The 5V-tolerant I/O and wide operating voltage range make it especially well-suited for factory-floor equipment and HVAC controllers where electrical noise is common.
When designing with this MCU, plan for in-circuit serial programming (ICSP) headers for production firmware updates and reserve the CLC outputs as PCB-trace routable signals. The exposed thermal pad on the 28-VQFN package must be soldered to the board ground plane for proper thermal dissipation and electrical performance.
This page synthesizes distributor pricing, drop-in VQFN-28 alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC18F27Q10-I/STX — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18F27Q10-I/STX (même facteur de forme et même empreinte) — différant par ADC, Package, Program Memory (Flash), Operating Temperature, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F26Q43T-I/STX
✅ Remplacement direct✓ En stock
$1.05 / unité
Voir la fiche technique →PIC18F25Q10-I/STX
✅ Remplacement direct✓ En stock
$1.58 / unité
Voir la fiche technique →PIC18F24Q10-I/STX
✅ Remplacement direct✓ En stock
$1.45 / unité
Voir la fiche technique →PIC18F26Q10T-I/SS
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.05 / unité
Voir la fiche technique →PIC18F27K42-I/ML
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.85 / unité
Voir la fiche technique →PIC18F27Q10-I/STX Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC18, 8-bit Harvard |
| Family | PIC18-Q10 (XLP) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| Maximum CPU Frequency | 64 MHz |
| Operating Voltage Range | 2.3 V to 5.5 V |
| ADC | 12-bit, up to 24 channels (typical for Q10 family) |
| Configurable Logic Cells (CLC) | Yes (per Q10 family) |
| Boîtier | 28-VQFN (4x4 mm) with exposed pad (STX = VQFN-28) |
| Plage de température de fonctionnement | -40C to +85C (Industrial, "I") |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant (per Microchip product page) |
| Lead-Free | Yes |
| 5V-Tolerant I/O | Yes |
Configuration des broches de PIC18F27Q10-I/STX
| Broche 1 | RA0/AN0/C1IN0+/C2IN0+/DACOUT — Analog/Digital I/O, ADC ch0, comparator input, DAC output |
| Broche 2 | RA1/AN1/C1IN1-/C2IN1- — Analog/Digital I/O, ADC ch1, comparator input |
| Broche 3 | RA2/AN2 — Analog/Digital I/O, ADC ch2 |
| Broche 4 | RA3/AN3/VREF+ — Analog/Digital I/O, ADC ch3, positive voltage reference |
| Broche 5 | RA4/AN4 — Analog/Digital I/O, ADC ch4 |
| Broche 6 | RA5/AN5 — Analog/Digital I/O, ADC ch5 |
| Broche 7 | RA6/OSC2/CLKOUT — Digital I/O, oscillator output or CLKOUT |
| Broche 8 | RA7/OSC1/CLKIN — Digital I/O, oscillator input or CLKIN |
| Broche 9 | VSS — Ground reference |
| Broche 10 | VDD — Positive supply voltage |
| Broche 11 | RB0/AN12/C1OUT — Analog/Digital I/O, ADC ch12, comparator output |
| Broche 12 | RB1/AN10/C1IN3+ — Analog/Digital I/O, ADC ch10, comparator input |
| Broche 13 | RB2/AN8/C2IN3+ — Analog/Digital I/O, ADC ch8, comparator input |
| Broche 14 | RB3/AN9/C2IN2- — Analog/Digital I/O, ADC ch9, comparator input |
| Broche 15 | RB4/AN11 — Analog/Digital I/O, ADC ch11 |
| Broche 16 | RB5/AN13 — Analog/Digital I/O, ADC ch13 |
| Broche 17 | RB6/ICSPCLK — Digital I/O, ICSP clock programming pin |
| Broche 18 | RB7/ICSPDAT — Digital I/O, ICSP data programming pin |
| Broche 19 | RC0/SOSCO — Digital I/O, secondary oscillator output |
| Broche 20 | RC1/SOSCI — Digital I/O, secondary oscillator input |
| Broche 21 | RC2 — Digital I/O |
| Broche 22 | RC3 — Digital I/O |
| Broche 23 | RC4 — Digital I/O |
| Broche 24 | RC5 — Digital I/O |
| Broche 25 | RC6 — Digital I/O |
| Broche 26 | RC7 — Digital I/O |
| Broche 27 | RE3 — Digital I/O, MCLR alternative on some packages [DATA_NEEDED: pin function on VQFN-28] |
| Broche 28 | EP — Exposed pad, must be soldered to PCB ground |
Applications typiques
PIC18F27Q10-I/STX convient pour 7 applications: Industrial Sensor Nodes, Building Automation Controllers, Low-Power IoT Edge Devices, Appliance Control Boards, USB / HID Human Interface Devices, Portable Consumer Electronics, Educational and Development Platforms.
Industrial Sensor Nodes
The PIC18F27Q10-I/STX is well matched to industrial sensor nodes because of its 5V-tolerant I/O, integrated 12-bit ADC with up to 24 channels, and configurable logic cells (CLCs) for hardware event detection. With 128 KB Flash, designers can implement sensor-fusion firmware, multiple communication stacks (Modbus RTU, CAN, UART), and still retain headroom for future field updates. The wide 2.3V-5.5V operating range lets it run directly from a 5V industrial rail, eliminating level shifters on analog inputs from 5V sensors.
Recommandé
Building Automation Controllers
For building automation (HVAC, lighting, access control), the PIC18F27Q10-I/STX offers the 5V noise immunity required on long cable runs near inductive loads. Its intelligent analog (op-amps, DAC, zero-cross detect) can directly interface with 0-10V lighting control signals and triac-driven loads. The 128 KB Flash supports firmware stacks for BACnet, Modbus, or proprietary building protocols, while CLCs enable custom event-trigger logic without external glue parts.
Recommandé
Low-Power IoT Edge Devices
The PIC18F27Q10-I/STX belongs to Microchip's XLP (eXtreme Low Power) family and supports multiple sleep modes with retention down to a few hundred nanoamps in deep sleep. Designers can wake on peripheral events, run sensor reads, transmit over UART, and return to sleep, achieving multi-year battery life in IoT edge nodes. The 128 KB Flash comfortably fits BLE/Wi-Fi co-processor command libraries plus application logic.
Recommandé
Appliance Control Boards
Washing machines, dishwashers and other white goods need 8-bit MCUs with strong noise immunity and enough Flash for motor-control and UI firmware. The PIC18F27Q10-I/STX provides 128 KB Flash for user-interface state machines, plus 5V tolerance for direct drive of triac interfaces. The Q10 family's integrated op-amps can be used as current-sense amplifiers for motor-feedback loops, eliminating external analog stages.
Recommandé
USB / HID Human Interface Devices
With 128 KB Flash and full-speed USB capability on Q10 family devices, the PIC18F27Q10-I/STX is suited to HID peripherals (keyboards, mice, custom controllers). The 5V tolerance simplifies interfacing to legacy PC-USB 5V rails, and the CLCs can implement debouncing and edge detection in hardware, freeing CPU cycles for HID reporting. Industrial temperature range (-40C to +85C) suits outdoor or rugged environments.
Recommandé
Portable Consumer Electronics
Portable consumer products benefit from the PIC18F27Q10-I/STX's XLP features, 128 KB Flash, and small 28-VQFN 4x4 mm footprint for compact boards. Designers can implement power management, user input handling, and basic graphical/text feedback on segmented LCD or LED indicators. Low sleep current extends battery life, while 5V tolerance permits direct drive of common 5V consumer peripherals.
Recommandé
Educational and Development Platforms
With 128 KB Flash, the PIC18F27Q10-I/STX is a good fit for university labs and maker boards where students need headroom for experiments. The wide operating voltage range (2.3V-5.5V) lets a single board exercise both 3.3V and 5V circuits. Microchip's MPLAB X IDE and XC8 compiler support the device fully, with the PIC18F27Q10 Curiosity Nano board providing a ready-made hardware platform for learning PIC architecture.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18F27Q10-I/STX — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F26Q43T-I/STX | PIC18F25Q10-I/STX | PIC18F24Q10-I/STX |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-VQFN (4x4 mm, STX) | 28-VQFN (4x4 mm, STX) - same | 28-VQFN (4x4 mm, STX) - same | 28-VQFN (4x4 mm, STX) - same |
| Core / Architecture | 8-bit PIC18 Harvard, 64 MHz | 8-bit PIC18, 64 MHz (same family) | 8-bit PIC18, 64 MHz (same family) | 8-bit PIC18, 64 MHz (same family) |
| Flash Memory | 128 KB | 64 KB | 32 KB | 16 KB |
| Operating Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| 5V-Tolerant I/O | Yes | Yes | Yes | Yes |
| Configurable Logic Cells (CLC) | Yes (Q10 family) | Yes | Yes | Yes |
| Temperature Range (I = Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Largest Flash in Q10 28-pin VQFN family (vs PIC18F26Q43T-I/STX)
- Same-family pin compatibility, more code space (vs PIC18F25Q10-I/STX)
- Includes intelligent analog and CLCs (vs PIC18F27K42-I/ML)
Notes de conception
Solder the exposed thermal pad (EP) of the 28-VQFN-4x4 to the PCB ground plane for proper thermal dissipation and electrical performance. Recommended footprint: thermal pad approximately 2.5 mm x 2.5 mm with multiple vias to inner ground layers. Keep analog traces short and away from switching signals.
Configuration bits (CONFIG) must be set correctly during programming. Verify FEXTOSC, RSTOSC, WDTE and BOREN settings against your application's brownout and oscillator requirements. Pin 17 (ICSPCLK) and pin 18 (ICSPDAT) must remain accessible for production programming - do not tie them to ground.
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 10) and a bulk capacitor (1-10 uF) on the same node. For designs switching between 64 MHz and deep-sleep, the MCU's internal voltage regulator needs the bulk capacitor to handle load transients without VDD droop.
When using CLCs (configurable logic cells), keep the CLC input pins routed close together on the PCB to minimize propagation delay skew between events. CLC outputs can be used to trigger ADC sampling without CPU intervention - place the CLC-driven ADC channel on an adjacent pin for shortest trace.
Informations de conformité
RoHS and REACH compliance per Microchip product page. Industrial temperature grade -40C to +85C. Not AEC-Q100 qualified (industrial use, not automotive). Refer to the manufacturer datasheet for detailed environmental specifications.
