PIC18F67J60-I/PT - 8-bit MCU, 128KB Flash, 10BASE-T Ethernet | Microchip
Référence : PIC18F67J60-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.2 | $8,20 |
| 10 | $7.38 | $73,80 |
| 100 | $6.55 | $655,00 |
| 500 | $5.85 | $2 925,00 |
| 1 000 | $5.2 | $5 200,00 |
PIC18F67J60-I/PT Présentation
An 8-bit microcontroller is a single-chip processor with an 8-bit data path, on-chip Flash program memory, RAM, and integrated peripherals. It sits in the hierarchy: microcontroller -> embedded microprocessor -> integrated circuit -> semiconductor. The PIC18 family extends this with a RISC architecture, hardware multiply, and C-friendly peripherals, while the PIC18F67J60 sub-family adds an embedded Ethernet controller that integrates the MAC, PHY, and pulse transformers, making it a single-chip solution for networked embedded designs.
Key features include 128 KB Flash organized as 64K x 16 words, 12 KB SRAM, an integrated 10BASE-T Ethernet MAC/PHY with HP Auto-MDIX support, 54 digital I/O pins, two USARTs, two MSSP (SPI/I2C) ports, two CCP/ECCP modules, a 10-channel 10-bit ADC, and one 8-bit and three 16-bit timers. The Ethernet peripheral is the defining element: it eliminates the need for an external PHY or MAC chip, reducing BOM cost and PCB area in remote-monitoring nodes.
Internally, the part uses a Harvard RISC core with a hardware multiplier, runs from an internal 8 MHz oscillator (pll-able to 41.667 MHz), and supports in-circuit programming via ICSP. The Flash and configuration bits are accessed through Microchip's standard MPLAB development flow, and the on-chip Ethernet module uses an internal DMA engine to offload packet handling from the CPU.
Typical applications include Industrial Automation (Modbus/TCP nodes, sensor gateways), Building Automation (BACnet/IP thermostats, lighting controllers), Remote Monitoring (utility metering, asset tracking), Embedded Web Servers, and Home Appliance Networking. The wide 4.2 V to 5.5 V supply range also makes it tolerant of unregulated 5 V wall adapters.
When designing with this part, ensure the integrated Ethernet PHY is matched to a 1:1 isolation transformer and RJ45 with HP Auto-MDIX wiring to preserve the auto-crossover feature. The 64-pin TQFP footprint requires careful PCB routing of the differential Ethernet pair to maintain 100-ohm differential impedance over a continuous reference plane.
Alternatives de remplacement direct pour PIC18F67J60-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18F67J60-I/PT (même facteur de forme et même empreinte) — différant par Core Architecture, Package, Timers, Operating Temperature, MSL Level.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F67J60T-I/PT
✅ Remplacement direct✓ En stock
$8.25 / unité
Voir la fiche technique →PIC18F67J10-I/PT
✅ Remplacement direct✓ En stock
$5.4 / unité
Voir la fiche technique →PIC18F66J60-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F67J65-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F6720-I/PT
✅ Remplacement direct✓ En stock
$21.1 / unité
Voir la fiche technique →PIC18F67J60-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC18 (8-bit RISC) |
| Program Memory | 128 KB Flash (64K x 16 words) |
| RAM | 12 KB |
| Max CPU Speed | 41.667 MHz (10 MIPS) |
| Tension d'alimentation | 4.2 V to 5.5 V |
| I/O Pins | 54 |
| Boîtier | 64-pin TQFP (10x10 mm) |
| Ethernet | Integrated 10BASE-T MAC + PHY with HP Auto-MDIX |
| ADC | 10 channels x 10-bit |
| Timers | 1 x 8-bit + 3 x 16-bit |
| Communication | 2x USART, 2x MSSP (SPI/I2C) |
| Température de fonctionnement | -40C to +85C (industrial) |
| PWM Channels | CCP + ECCP |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC18F67J60-I/PT
| Broche 1 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Broche 2 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Broche 3 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 |
| Broche 4 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 |
| Broche 5 | RA4 — PORTA bit 4 |
| Broche 6 | RA5/AN4 — PORTA bit 5 / analog input 4 |
| Broche 7 | RA6 — PORTA bit 6 |
| Broche 8 | RA7 — PORTA bit 7 |
| Broche 9 | VDD — Positive supply |
| Broche 10 | VSS — Ground |
| Broche 11 | OSC1/CLKI/RA7 — Crystal input / external clock |
| Broche 12 | OSC2/CLKO/RA6 — Crystal output |
| Broche 13 | RC0 — PORTC bit 0 |
| Broche 14 | RC1 — PORTC bit 1 |
| Broche 15 | RC2 — PORTC bit 2 |
| Broche 16 | RC3 — PORTC bit 3 |
| Broche 17 | RC4 — PORTC bit 4 |
| Broche 18 | RC5 — PORTC bit 5 |
| Broche 19 | RC6 — PORTC bit 6 |
| Broche 20 | RC7 — PORTC bit 7 |
| Broche 21 | RD0 — PORTD bit 0 |
| Broche 22 | RD1 — PORTD bit 1 |
| Broche 23 | RD2 — PORTD bit 2 |
| Broche 24 | RD3 — PORTD bit 3 |
| Broche 25 | RD4 — PORTD bit 4 |
| Broche 26 | RD5 — PORTD bit 5 |
| Broche 27 | RD6 — PORTD bit 6 |
| Broche 28 | RD7 — PORTD bit 7 |
| Broche 29 | VSS — Ground |
| Broche 30 | VDD — Positive supply |
| Broche 31 | ETH+ — Ethernet differential pair positive |
| Broche 32 | ETH- — Ethernet differential pair negative |
| Broche 33 | RE0 — PORTE bit 0 |
| Broche 34 | RE1 — PORTE bit 1 |
| Broche 35 | RE2 — PORTE bit 2 |
| Broche 36 | RE3 — PORTE bit 3 |
| Broche 37 | RE4 — PORTE bit 4 |
| Broche 38 | RE5 — PORTE bit 5 |
| Broche 39 | RE6 — PORTE bit 6 |
| Broche 40 | RE7 — PORTE bit 7 |
| Broche 41 | RF0 — PORTF bit 0 |
| Broche 42 | RF1 — PORTF bit 1 |
| Broche 43 | RF2 — PORTF bit 2 |
| Broche 44 | RF3 — PORTF bit 3 |
| Broche 45 | RF4 — PORTF bit 4 |
| Broche 46 | RF5 — PORTF bit 5 |
| Broche 47 | RF6 — PORTF bit 6 |
| Broche 48 | RF7 — PORTF bit 7 |
| Broche 49 | RG0 — PORTG bit 0 |
| Broche 50 | RG1 — PORTG bit 1 |
| Broche 51 | RG2 — PORTG bit 2 |
| Broche 52 | RG3 — PORTG bit 3 |
| Broche 53 | RG4 — PORTG bit 4 |
| Broche 54 | RG5 — PORTG bit 5 |
| Broche 55 | RG6 — PORTG bit 6 |
| Broche 56 | RG7 — PORTG bit 7 |
| Broche 57 | RH0 — PORTH bit 0 |
| Broche 58 | RH1 — PORTH bit 1 |
| Broche 59 | RH2 — PORTH bit 2 |
| Broche 60 | RH3 — PORTH bit 3 |
| Broche 61 | RH4 — PORTH bit 4 |
| Broche 62 | RH5 — PORTH bit 5 |
| Broche 63 | RH6 — PORTH bit 6 |
| Broche 64 | RH7 — PORTH bit 7 |
Applications typiques
PIC18F67J60-I/PT convient pour 6 applications: Industrial Automation Gateway, Building Automation Controller, Remote Monitoring and Telemetry, Embedded Web Server, Home Appliance Networking, Point-of-Sale Terminal.
Industrial Automation Gateway
The PIC18F67J60-I/PT is well suited to industrial automation gateways such as Modbus/TCP nodes and sensor aggregation bridges. The integrated 10BASE-T MAC/PHY with HP Auto-MDIX eliminates the external Ethernet controller, reducing BOM and PCB area in DIN-rail enclosures. The 12 KB SRAM supports Microchip's TCP/IP Lite stack, while 128 KB of Flash accommodates protocol translation logic. The 54 digital I/O pins handle multiple sensor interfaces, and the -40C to +85C industrial range tolerates factory environments.
Recommandé
Building Automation Controller
For BACnet/IP thermostats, lighting controllers, and HVAC monitoring nodes, the PIC18F67J60-I/PT provides a single-chip networked solution. Its 4.2 V to 5.5 V supply allows direct 5 V wall-adapter powering, eliminating the need for an additional LDO. The 41.667 MHz (10 MIPS) core processes BACnet/IP application layers and scheduling logic, while the two USARTs and two MSSP ports interface to local RS-485 sensor networks. The 10-channel 10-bit ADC supports multiple analog sensor inputs from temperature, humidity, and airflow sensors.
Recommandé
Remote Monitoring and Telemetry
The PIC18F67J60-I/PT enables remote monitoring of utility meters, asset trackers, and environmental sensors via Ethernet. The 10BASE-T PHY provides reliable wired connectivity to plant SCADA systems, while the 128 KB Flash stores TCP/IP stack, SNMP agent, and data-logging firmware. The wide 4.2 V to 5.5 V supply tolerance accommodates long cable runs with voltage drop, and the integrated HP Auto-MDIX allows direct connection to either a switch or a PC crossover without manual configuration.
Recommandé
Embedded Web Server
Designers building embedded web servers for equipment configuration and diagnostics rely on the PIC18F67J60-I/PT's integrated Ethernet plus 128 KB Flash. The on-chip MAC/PHY plus generous program memory allows hosting of HTTP servers with custom HTML interfaces for setting up and monitoring industrial equipment. The 12 KB RAM supports TCP socket buffers, and the two ECCP/PWM modules can control motor speed or LED brightness directly from the web interface without intermediate logic.
Recommandé
Home Appliance Networking
Connected home appliances such as smart refrigerators, washers, and HVAC controllers benefit from the PIC18F67J60-I/PT's single-chip networking. The HP Auto-MDIX feature lets designers ignore whether a home router uses crossover wiring, simplifying end-user installation. The 41.667 MHz core handles light TCP/IP traffic from companion mobile apps, while the 54 I/O pins drive user interfaces, sensors, and motor control stages on the appliance main board.
Recommandé
Point-of-Sale Terminal
Compact point-of-sale and kiosk terminals use the PIC18F67J60-I/PT as their network and main control MCU. The integrated Ethernet enables IP-based payment processing and remote firmware updates over store networks. The 128 KB Flash holds graphical UI code, while the multiple USART/MSSP peripherals connect to barcode scanners, receipt printers, and secure payment modules. The industrial temperature range supports unattended kiosks and outdoor payment stations.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18F67J60-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F67J60T-I/PT | PIC18F67J10-I/PT | PIC18F66J60-I/PT | PIC18F67J65-I/PT | PIC18F6720-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Flash Memory | 128 KB | 128 KB | 128 KB | 64 KB (-50%) | 128 KB | 128 KB |
| RAM | 12 KB | 12 KB | 8 KB | 8 KB | 12 KB | 3840 bytes |
| Integrated Ethernet | 10BASE-T MAC + PHY | 10BASE-T MAC + PHY | No (external required) | 10BASE-T MAC + PHY | 10BASE-T MAC + PHY | No (external required) |
| Max CPU Speed | 41.667 MHz | 41.667 MHz | 40 MHz | 41.667 MHz | 41.667 MHz | 40 MHz |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 2.0 V to 3.6 V | 4.2 V to 5.5 V | 2.0 V to 3.6 V | 4.2 V to 5.5 V |
| I/O Pins | 54 | 54 | 54 | 54 | 54 | 54 |
Principaux différenciateurs
- Single-chip Ethernet MAC + PHY with HP Auto-MDIX (vs PIC18F67J10-I/PT)
- Higher 128 KB Flash density vs 64 KB variant (vs PIC18F66J60-I/PT)
- Two MSSP ports for SPI + I2C simultaneously (vs PIC18F6720-I/PT)
Notes de conception
Route the integrated Ethernet differential pair (TP+/- on the chip pins) over a continuous ground reference plane with 100-ohm differential impedance. Keep the trace length under 50 mm and avoid splits in the ground plane beneath the pair to maintain signal integrity for 10BASE-T operation; place the 1:1 isolation transformer within 25 mm of the PHY pins.
Estimated: at 41.667 MHz and 5 V VDD with all peripherals enabled, the device typically draws ~70 mA. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of each VDD pin and a bulk 10 uF tantalum cap at the regulator output; the Ethernet PHY benefits from an additional 10 uF + 100 nF LC filter near the analog supply pin to suppress switching noise coupling into the line drivers.
The 'J' in PIC18F67J60 indicates a 5V-tolerant I/O design that cannot operate below 4.2 V - connecting this part to a 3.3 V rail will result in undefined oscillator behavior. Do not substitute a PIC18F67J10 design without re-validating the supply and crystal circuit. Also ensure the CONFIG bits set the correct oscillator mode and disable the JTAG pins if not used, otherwise PORTB will be unavailable.
Informations de conformité
RoHS and REACH compliant per Microchip product documentation. Not AEC-Q100 qualified - this part targets industrial-grade applications rather than automotive. Lead-free (Pb-free) terminations confirmed.
