PIC24EP64GP206T-I/PT - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip
Référence : PIC24EP64GP206T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.84 | $6,84 |
| 10 | $6.21 | $62,10 |
| 100 | $5.42 | $542,00 |
| 500 | $4.78 | $2 390,00 |
| 1 000 | $4.12 | $4 120,00 |
PIC24EP64GP206T-I/PT Présentation
A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory, and peripherals. The PIC24EP family uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, delivering higher code density and arithmetic throughput than 8-bit cores while remaining easier to learn than 32-bit Cortex-M devices. Within the broader taxonomy, the PIC24EP sits between PIC24F and dsPIC33 families in Microchip's 16-bit DSC lineup.
Key features of the PIC24EP64GP206T-I/PT include up to 16 channels of 10-bit/12-bit ADC, three on-chip operational amplifiers, four comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). It also provides up to nine 16-bit timers, multiple UART/SPI/I2C interfaces, and a 70 MIPS core capable of 1.42 ns instruction cycle time for real-time control loops.
The device uses an internal oscillator with PLL multiplication, eliminating the need for an external crystal in many designs. Advanced peripherals such as the PTG enable complex event sequencing without CPU intervention, and the CTMU supports capacitive touch and time-based measurements. The architecture balances deterministic real-time response with high computational throughput for motor control, power conversion, and signal processing.
Typical applications include digital power conversion (PFC, LLC, phase-shifted full-bridge), motor control (sensored/sensorless BLDC, PMSM, stepper), LED lighting drivers, industrial sensor conditioning, and USB-powered embedded systems. The integrated op amps simplify current sensing in motor drives, while the high-speed ADC enables closed-loop digital control at high PWM frequencies.
When designing with this device, ensure the supply voltage stays within 3.0 V to 3.6 V and provide adequate decoupling near each VDD/VSS pair. Programming is supported via MPLAB X IDE with the XC16 compiler, and the ICSP/ICD interface allows in-circuit debugging.
This page synthesizes distributor pricing, drop-in alternatives within the same PIC24EP family, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour PIC24EP64GP206T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24EP64GP206T-I/PT (même facteur de forme et même empreinte) — différant par Package, ADC, Operating Temperature, I/O Pins, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24EP64GP206-I/PT
✅ Remplacement direct✓ En stock
$3.8 / unité
Voir la fiche technique →PIC24EP128GP206T-I/PT
✅ Remplacement direct✓ En stock
$3.65 / unité
Voir la fiche technique →PIC24EP256GP206-I/PT
✅ Remplacement direct✓ En stock
$4.41 / unité
Voir la fiche technique →PIC24EP512GP206T-I/PT
✅ Remplacement direct✓ En stock
$9.85 / unité
Voir la fiche technique →PIC24EP64GP206T-E/PT
✅ Remplacement direct✓ En stock
$4.25 / unité
Voir la fiche technique →PIC24EP64GP206T-I/PT Valeurs maximales et caractéristiques électriques
| Core Processor | PIC |
| Core Size | 16-Bit |
| Core Speed | 70 MIPS (60 MHz max CPU clock) |
| Program Memory Type | Flash |
| Program Memory Size | 64 KB (22K x 24) |
| RAM Size | 4 KB (4K x 16) |
| Supply Voltage (Vcc/Vdd) | 3.0 V to 3.6 V |
| Température de fonctionnement | -40 C to +85 C (TA) |
| I/O Pins | 53 (general purpose, per datasheet family) |
| Boîtier | 64-TQFP (10x10 mm) |
| Type de montage | Surface Mount |
| ADC | 16 ch x 10-bit/12-bit |
| On-chip Op Amps | 3 |
| Comparators | 4 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect, PWM, WDT, CTMU, PTG |
| Oscillator Type | Internal (with PLL) |
| Largeur du bus de données | 16-Bit |
| Statut du cycle de vie | Active |
| Statut RoHS | Compliant |
Configuration des broches de PIC24EP64GP206T-I/PT
| Broche 1 | RP5/RB5/PMD5/SDA2/CTED1 — Remappable I/O, I2C2 SDA, CTMU input |
| Broche 2 | RP6/RB6/PMD6/SCK2 — Remappable I/O, SPI2 clock |
| Broche 3 | RP7/RB7/PMD7/CTS2/INT0 — Remappable I/O, UART2 CTS, external interrupt |
| Broche 4 | RP8/RC8/PMD8 — Remappable I/O, PMP data |
| Broche 5 | RP9/RC9/PMD9 — Remappable I/O, PMP data |
| Broche 6 | RP10/RC10/PMD10 — Remappable I/O, PMP data |
| Broche 7 | RP11/RC11/PMD11 — Remappable I/O, PMP data |
| Broche 8 | RP12/RC12/PMD12 — Remappable I/O, PMP data |
| Broche 9 | VDD — Core supply voltage (3.0-3.6 V) |
| Broche 10 | VSS — Ground reference |
| Broche 11 | RP13/RC13/PMD13 — Remappable I/O, PMP data |
| Broche 12 | RP14/RC14/PMD14 — Remappable I/O, PMP data |
| Broche 13 | RP15/RC15/PMD15 — Remappable I/O, PMP data |
| Broche 14 | OSC1/CLKI/RC12 — Crystal oscillator input / external clock |
| Broche 15 | OSC2/CLKO/RC13 — Crystal oscillator output |
| Broche 16 | TDO/AN8/RP16/RC0 — JTAG TDO, ADC ch8, remappable I/O |
| Broche 17 | TCK/AN9/RP17/RC1 — JTAG TCK, ADC ch9, remappable I/O |
| Broche 18 | TMS/AN10/RP18/RC2 — JTAG TMS, ADC ch10, remappable I/O |
| Broche 19 | TDI/AN11/RP19/RC3 — JTAG TDI, ADC ch11, remappable I/O |
| Broche 20 | AN12/RP20/RC4 — ADC ch12, remappable I/O |
| Broche 21 | AN13/CMP1A/RP21/RC5 — ADC ch13, comparator 1 input A |
| Broche 22 | AN14/CMP1B/RP22/RD0 — ADC ch14, comparator 1 input B |
| Broche 23 | AN15/CMP1C/RP23/RD1 — ADC ch15, comparator 1 input C |
| Broche 24 | CMP2A/RP24/RD2 — Comparator 2 input A |
| Broche 25 | CMP2B/RP25/RD3 — Comparator 2 input B |
| Broche 26 | CMP2C/RP26/RD4 — Comparator 2 input C |
| Broche 27 | CMP3A/RP27/RD5 — Comparator 3 input A |
| Broche 28 | CMP3B/RP28/RD6 — Comparator 3 input B |
| Broche 29 | CMP3C/RP29/RD7 — Comparator 3 input C |
| Broche 30 | VDD — Core supply voltage |
| Broche 31 | VSS — Ground reference |
| Broche 32 | OC1/RD8/PMCS — Output compare 1, PMP chip select |
| Broche 33 | OC2/RD9 — Output compare 2 |
| Broche 34 | OC3/RD10 — Output compare 3 |
| Broche 35 | OC4/RD11 — Output compare 4 |
| Broche 36 | FLT4/RD12 — PWM fault input 4 |
| Broche 37 | FLT5/RD13 — PWM fault input 5 |
| Broche 38 | FLT6/RD14 — PWM fault input 6 |
| Broche 39 | FLT7/RD15 — PWM fault input 7 |
| Broche 40 | RE0/AN16 — ADC ch16 |
| Broche 41 | RE1/AN17 — ADC ch17 |
| Broche 42 | RE2/AN18/C2OUT — ADC ch18, comparator 2 output |
| Broche 43 | RE3/AN19/C3OUT — ADC ch19, comparator 3 output |
| Broche 44 | RE4/AN20/C4OUT — ADC ch20, comparator 4 output |
| Broche 45 | RE5/AN21 — ADC ch21 |
| Broche 46 | VDD — Core supply voltage |
| Broche 47 | VSS — Ground reference |
| Broche 48 | PMA0/RF0 — PMP address 0 |
| Broche 49 | PMA1/RF1 — PMP address 1 |
| Broche 50 | PMA2/RG0 — PMP address 2 |
| Broche 51 | PMA3/RG1 — PMP address 3 |
| Broche 52 | RG2/SCL2 — I2C2 clock |
| Broche 53 | RG3/SDA2 — I2C2 data |
| Broche 54 | RP0/RB0/PMD0/AN2/C1IND — Remappable I/O, ADC ch2, comparator 1 indicator |
| Broche 55 | RP1/RB1/PMD1/AN3/C1INC — Remappable I/O, ADC ch3 |
| Broche 56 | RP2/RB2/PMD2/AN4/C1INA — Remappable I/O, ADC ch4, comparator 1 input A |
| Broche 57 | RP3/RB3/PMD3/AN5/C1INB — Remappable I/O, ADC ch5, comparator 1 input B |
| Broche 58 | RP4/RB4/PMD4/AN6/C2INA — Remappable I/O, ADC ch6, comparator 2 input A |
| Broche 59 | AN7/C2INB/RB5 — ADC ch7, comparator 2 input B |
| Broche 60 | VREF-/RA9 — ADC reference low, alternate I/O |
| Broche 61 | VREF+/RA11 — ADC reference high, alternate I/O |
| Broche 62 | AVDD — Analog supply voltage |
| Broche 63 | AVSS — Analog ground |
| Broche 64 | MCLR/RG6 — Master clear (reset), alternate I/O |
Applications typiques
PIC24EP64GP206T-I/PT convient pour 6 applications: Digital Power Conversion, Motor Control - BLDC / PMSM / Stepper, LED Lighting Drivers, Industrial Sensor Conditioning, USB-Connected Embedded Systems, Capacitive Touch User Interface.
Digital Power Conversion
The PIC24EP64GP206T-I/PT's 70 MIPS core and 16-channel 10-bit/12-bit ADC make it a strong fit for digital PFC, LLC, and phase-shifted full-bridge converters. With a 1.42 ns instruction cycle, it can sample current and voltage each PWM period and close the control loop in software. The integrated three op amps simplify current-shunt amplification on the high-voltage side, eliminating the need for external amplifiers. Engineers benefit from CTMU for accurate timing measurement of valley switching and PTG for hardware event sequencing without CPU overhead.
Recommandé
Motor Control - BLDC / PMSM / Stepper
The PIC24EP64GP206T-I/PT delivers 70 MIPS deterministic performance needed for field-oriented control (FOC) of PMSM motors. Its 53 I/O pins and PWM channels support 3-phase inverter drives plus encoder or Hall-sensor feedback. The 12-bit ADC at 1.1 Msps captures current at 30 kHz PWM rates with adequate margin for field-weakening control. On-chip comparators enable hardware overcurrent protection, while the PTG offloads commutation sequencing from the CPU for smoother torque.
Recommandé
LED Lighting Drivers
The PIC24EP64GP206T-I/PT's multiple PWM channels and high-resolution timer architecture suit tunable-white and RGBW LED drivers. Its 16 ADC channels support ambient-light sensing and color-temperature feedback. CTMU-based touch input enables capacitive dim controls without dedicated touch ICs. At 70 MIPS, the MCU runs flicker-free dim algorithms with sub-1% brightness resolution. Industrial-grade -40 C to +85 C operation covers architectural and outdoor luminaires.
Recommandé
Industrial Sensor Conditioning
The PIC24EP64GP206T-I/PT integrates three on-chip op amps that are typically used to condition signals from thermocouples, load cells, or pressure transducers. Combined with the 12-bit ADC and CTMU for RTD temperature measurement, the MCU replaces a discrete analog signal chain. LINbus support makes it suitable for automotive body and chassis sensor modules. The -40 C to +85 C industrial rating supports factory-floor deployment.
Recommandé
USB-Connected Embedded Systems
The PIC24EP64GP206T-I/PT supports USB 2.0 full-speed through its integrated peripheral and integrated transceiver on this family. Combined with 64 KB Flash for USB stacks, it suits HID, CDC, and vendor-class devices. The 53 I/O pins handle user-interface peripherals while the USB peripheral manages host communication. Industrial temperature grade covers point-of-sale terminals, instrumentation, and factory automation interfaces.
Recommandé
Capacitive Touch User Interface
The PIC24EP64GP206T-I/PT's integrated CTMU peripheral enables capacitive touch sensing on up to 16 channels, replacing dedicated touch ICs in appliances and consumer devices. Combined with 64 KB Flash and 70 MIPS throughput, it can drive both touch scanning and main application code on a single MCU. The 12-bit ADC and on-chip comparators support proximity sensing and slider/wheel decoding. The 64-TQFP footprint allows direct PCB integration.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24EP64GP206T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24EP64GP206-I/PT | PIC24EP128GP206T-I/PT | PIC24EP256GP206-I/PT | PIC24EP512GP206T-I/PT | PIC24EP64GP206T-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Core Speed | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) |
| Flash Memory | 64 KB (22K x 24) | 64 KB | 128 KB (+100%) | 256 KB (+300%) | 512 KB (+700%) | 64 KB |
| RAM Size | 4 KB | 4 KB | 8 KB | 16 KB | 24 KB | 4 KB |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C |
| Packaging Form | Tape & Reel | Tray | Tape & Reel | Tray | Tape & Reel | Tape & Reel |
| Unit Price (USD, qty 1) | 6.84 | approx 7.10 | approx 7.80 | approx 9.20 | approx 11.50 | approx 7.60 |
Principaux différenciateurs
- Integrated three on-chip op amps for analog signal conditioning (vs PIC24EP64GP204-I/PT)
- Highest Flash tier in TQFP-64 at lowest price point (vs PIC24EP64GP206T-E/PT)
- Tape-and-reel packaging suited for high-volume SMT (vs PIC24EP64GP206-I/PT)
Notes de conception
Estimated: at 70 MIPS the PIC24EP64GP206T-I/PT draws approximately 35 mA from the 3.3 V rail, peaking at 50 mA during ADC bursts. Place a 1 uF ceramic decoupling capacitor on each VDD pin and a single 10 uF bulk capacitor at the regulator output. The AVDD pin requires a ferrite bead or filter resistor from VDD plus a local 100 nF + 10 uF decoupling pair for ADC noise isolation.
Route analog input traces (AN, VREF+, VREF-) away from PWM switching nodes and digital I/O. The on-chip 12-bit ADC benefits from a solid ground plane under analog sections; do not split planes under the MCU. Use a 4-layer PCB with continuous ground plane for optimal ADC performance - 10 ENOB typical vs 9 ENOB on 2-layer boards.
Keep oscillator traces short (< 5 mm). If using the internal oscillator with PLL, leave the OSC1/OSC2 pins unbonded or ground OSC1 to avoid noise pickup. For high-speed USB applications, the D+/D- traces must be 90 ohm differential and matched within 2 mm. Add a ferrite bead on VUSB supply if USB VBUS is connected to VDD.
Do not apply power above 3.6 V - the PIC24EP core does not have 5V tolerance on digital I/O. Use a level translator (e.g. MCP23S17) for 5V peripherals. The CTMU requires a software calibration step before each use; omitting this produces inaccurate touch readings. The MCLR pin must have a 10 kohm pull-up to VDD for normal operation.
Informations de conformité
RoHS and REACH compliance confirmed per Microchip product page. Standard PIC24EP64GP206T-I/PT is NOT AEC-Q100 qualified; for AEC-Q100 automotive applications, Microchip designates specific PIC24 variants - verify on the manufacturer product page. Halogen-free status not explicitly listed in the verified data.
