PIC24EP64GP206T-I/PT - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip
N.º da peça: PIC24EP64GP206T-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.84 | $6,84 |
| 10 | $6.21 | $62,10 |
| 100 | $5.42 | $542,00 |
| 500 | $4.78 | $2.390,00 |
| 1.000 | $4.12 | $4.120,00 |
PIC24EP64GP206T-I/PT Visão geral
A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory, and peripherals. The PIC24EP family uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, delivering higher code density and arithmetic throughput than 8-bit cores while remaining easier to learn than 32-bit Cortex-M devices. Within the broader taxonomy, the PIC24EP sits between PIC24F and dsPIC33 families in Microchip's 16-bit DSC lineup.
Key features of the PIC24EP64GP206T-I/PT include up to 16 channels of 10-bit/12-bit ADC, three on-chip operational amplifiers, four comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). It also provides up to nine 16-bit timers, multiple UART/SPI/I2C interfaces, and a 70 MIPS core capable of 1.42 ns instruction cycle time for real-time control loops.
The device uses an internal oscillator with PLL multiplication, eliminating the need for an external crystal in many designs. Advanced peripherals such as the PTG enable complex event sequencing without CPU intervention, and the CTMU supports capacitive touch and time-based measurements. The architecture balances deterministic real-time response with high computational throughput for motor control, power conversion, and signal processing.
Typical applications include digital power conversion (PFC, LLC, phase-shifted full-bridge), motor control (sensored/sensorless BLDC, PMSM, stepper), LED lighting drivers, industrial sensor conditioning, and USB-powered embedded systems. The integrated op amps simplify current sensing in motor drives, while the high-speed ADC enables closed-loop digital control at high PWM frequencies.
When designing with this device, ensure the supply voltage stays within 3.0 V to 3.6 V and provide adequate decoupling near each VDD/VSS pair. Programming is supported via MPLAB X IDE with the XC16 compiler, and the ICSP/ICD interface allows in-circuit debugging.
This page synthesizes distributor pricing, drop-in alternatives within the same PIC24EP family, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para PIC24EP64GP206T-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24EP64GP206T-I/PT (mesmo formato e footprint) — diferindo em Package, ADC, Operating Temperature, I/O Pins, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC24EP64GP206-I/PT
✅ Drop-In✓ Em estoque
$3.8 / unidade
Ver ficha técnica →PIC24EP128GP206T-I/PT
✅ Drop-In✓ Em estoque
$3.65 / unidade
Ver ficha técnica →PIC24EP256GP206-I/PT
✅ Drop-In✓ Em estoque
$4.41 / unidade
Ver ficha técnica →PIC24EP512GP206T-I/PT
✅ Drop-In✓ Em estoque
$9.85 / unidade
Ver ficha técnica →PIC24EP64GP206T-E/PT
✅ Drop-In✓ Em estoque
$4.25 / unidade
Ver ficha técnica →PIC24EP64GP206T-I/PT Classificações máximas e características elétricas
| Core Processor | PIC |
| Core Size | 16-Bit |
| Core Speed | 70 MIPS (60 MHz max CPU clock) |
| Program Memory Type | Flash |
| Program Memory Size | 64 KB (22K x 24) |
| RAM Size | 4 KB (4K x 16) |
| Supply Voltage (Vcc/Vdd) | 3.0 V to 3.6 V |
| Temperatura de operação | -40 C to +85 C (TA) |
| I/O Pins | 53 (general purpose, per datasheet family) |
| Encapsulamento | 64-TQFP (10x10 mm) |
| Tipo de montagem | Surface Mount |
| ADC | 16 ch x 10-bit/12-bit |
| On-chip Op Amps | 3 |
| Comparators | 4 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect, PWM, WDT, CTMU, PTG |
| Oscillator Type | Internal (with PLL) |
| Largura do barramento de dados | 16-Bit |
| Status do ciclo de vida | Active |
| Status RoHS | Compliant |
Configuração de pinos do PIC24EP64GP206T-I/PT
| Pino 1 | RP5/RB5/PMD5/SDA2/CTED1 — Remappable I/O, I2C2 SDA, CTMU input |
| Pino 2 | RP6/RB6/PMD6/SCK2 — Remappable I/O, SPI2 clock |
| Pino 3 | RP7/RB7/PMD7/CTS2/INT0 — Remappable I/O, UART2 CTS, external interrupt |
| Pino 4 | RP8/RC8/PMD8 — Remappable I/O, PMP data |
| Pino 5 | RP9/RC9/PMD9 — Remappable I/O, PMP data |
| Pino 6 | RP10/RC10/PMD10 — Remappable I/O, PMP data |
| Pino 7 | RP11/RC11/PMD11 — Remappable I/O, PMP data |
| Pino 8 | RP12/RC12/PMD12 — Remappable I/O, PMP data |
| Pino 9 | VDD — Core supply voltage (3.0-3.6 V) |
| Pino 10 | VSS — Ground reference |
| Pino 11 | RP13/RC13/PMD13 — Remappable I/O, PMP data |
| Pino 12 | RP14/RC14/PMD14 — Remappable I/O, PMP data |
| Pino 13 | RP15/RC15/PMD15 — Remappable I/O, PMP data |
| Pino 14 | OSC1/CLKI/RC12 — Crystal oscillator input / external clock |
| Pino 15 | OSC2/CLKO/RC13 — Crystal oscillator output |
| Pino 16 | TDO/AN8/RP16/RC0 — JTAG TDO, ADC ch8, remappable I/O |
| Pino 17 | TCK/AN9/RP17/RC1 — JTAG TCK, ADC ch9, remappable I/O |
| Pino 18 | TMS/AN10/RP18/RC2 — JTAG TMS, ADC ch10, remappable I/O |
| Pino 19 | TDI/AN11/RP19/RC3 — JTAG TDI, ADC ch11, remappable I/O |
| Pino 20 | AN12/RP20/RC4 — ADC ch12, remappable I/O |
| Pino 21 | AN13/CMP1A/RP21/RC5 — ADC ch13, comparator 1 input A |
| Pino 22 | AN14/CMP1B/RP22/RD0 — ADC ch14, comparator 1 input B |
| Pino 23 | AN15/CMP1C/RP23/RD1 — ADC ch15, comparator 1 input C |
| Pino 24 | CMP2A/RP24/RD2 — Comparator 2 input A |
| Pino 25 | CMP2B/RP25/RD3 — Comparator 2 input B |
| Pino 26 | CMP2C/RP26/RD4 — Comparator 2 input C |
| Pino 27 | CMP3A/RP27/RD5 — Comparator 3 input A |
| Pino 28 | CMP3B/RP28/RD6 — Comparator 3 input B |
| Pino 29 | CMP3C/RP29/RD7 — Comparator 3 input C |
| Pino 30 | VDD — Core supply voltage |
| Pino 31 | VSS — Ground reference |
| Pino 32 | OC1/RD8/PMCS — Output compare 1, PMP chip select |
| Pino 33 | OC2/RD9 — Output compare 2 |
| Pino 34 | OC3/RD10 — Output compare 3 |
| Pino 35 | OC4/RD11 — Output compare 4 |
| Pino 36 | FLT4/RD12 — PWM fault input 4 |
| Pino 37 | FLT5/RD13 — PWM fault input 5 |
| Pino 38 | FLT6/RD14 — PWM fault input 6 |
| Pino 39 | FLT7/RD15 — PWM fault input 7 |
| Pino 40 | RE0/AN16 — ADC ch16 |
| Pino 41 | RE1/AN17 — ADC ch17 |
| Pino 42 | RE2/AN18/C2OUT — ADC ch18, comparator 2 output |
| Pino 43 | RE3/AN19/C3OUT — ADC ch19, comparator 3 output |
| Pino 44 | RE4/AN20/C4OUT — ADC ch20, comparator 4 output |
| Pino 45 | RE5/AN21 — ADC ch21 |
| Pino 46 | VDD — Core supply voltage |
| Pino 47 | VSS — Ground reference |
| Pino 48 | PMA0/RF0 — PMP address 0 |
| Pino 49 | PMA1/RF1 — PMP address 1 |
| Pino 50 | PMA2/RG0 — PMP address 2 |
| Pino 51 | PMA3/RG1 — PMP address 3 |
| Pino 52 | RG2/SCL2 — I2C2 clock |
| Pino 53 | RG3/SDA2 — I2C2 data |
| Pino 54 | RP0/RB0/PMD0/AN2/C1IND — Remappable I/O, ADC ch2, comparator 1 indicator |
| Pino 55 | RP1/RB1/PMD1/AN3/C1INC — Remappable I/O, ADC ch3 |
| Pino 56 | RP2/RB2/PMD2/AN4/C1INA — Remappable I/O, ADC ch4, comparator 1 input A |
| Pino 57 | RP3/RB3/PMD3/AN5/C1INB — Remappable I/O, ADC ch5, comparator 1 input B |
| Pino 58 | RP4/RB4/PMD4/AN6/C2INA — Remappable I/O, ADC ch6, comparator 2 input A |
| Pino 59 | AN7/C2INB/RB5 — ADC ch7, comparator 2 input B |
| Pino 60 | VREF-/RA9 — ADC reference low, alternate I/O |
| Pino 61 | VREF+/RA11 — ADC reference high, alternate I/O |
| Pino 62 | AVDD — Analog supply voltage |
| Pino 63 | AVSS — Analog ground |
| Pino 64 | MCLR/RG6 — Master clear (reset), alternate I/O |
Aplicações típicas
PIC24EP64GP206T-I/PT é adequado para 6 aplicaçãos: Digital Power Conversion, Motor Control - BLDC / PMSM / Stepper, LED Lighting Drivers, Industrial Sensor Conditioning, USB-Connected Embedded Systems, Capacitive Touch User Interface.
Digital Power Conversion
The PIC24EP64GP206T-I/PT's 70 MIPS core and 16-channel 10-bit/12-bit ADC make it a strong fit for digital PFC, LLC, and phase-shifted full-bridge converters. With a 1.42 ns instruction cycle, it can sample current and voltage each PWM period and close the control loop in software. The integrated three op amps simplify current-shunt amplification on the high-voltage side, eliminating the need for external amplifiers. Engineers benefit from CTMU for accurate timing measurement of valley switching and PTG for hardware event sequencing without CPU overhead.
Recomendado
Motor Control - BLDC / PMSM / Stepper
The PIC24EP64GP206T-I/PT delivers 70 MIPS deterministic performance needed for field-oriented control (FOC) of PMSM motors. Its 53 I/O pins and PWM channels support 3-phase inverter drives plus encoder or Hall-sensor feedback. The 12-bit ADC at 1.1 Msps captures current at 30 kHz PWM rates with adequate margin for field-weakening control. On-chip comparators enable hardware overcurrent protection, while the PTG offloads commutation sequencing from the CPU for smoother torque.
Recomendado
LED Lighting Drivers
The PIC24EP64GP206T-I/PT's multiple PWM channels and high-resolution timer architecture suit tunable-white and RGBW LED drivers. Its 16 ADC channels support ambient-light sensing and color-temperature feedback. CTMU-based touch input enables capacitive dim controls without dedicated touch ICs. At 70 MIPS, the MCU runs flicker-free dim algorithms with sub-1% brightness resolution. Industrial-grade -40 C to +85 C operation covers architectural and outdoor luminaires.
Recomendado
Industrial Sensor Conditioning
The PIC24EP64GP206T-I/PT integrates three on-chip op amps that are typically used to condition signals from thermocouples, load cells, or pressure transducers. Combined with the 12-bit ADC and CTMU for RTD temperature measurement, the MCU replaces a discrete analog signal chain. LINbus support makes it suitable for automotive body and chassis sensor modules. The -40 C to +85 C industrial rating supports factory-floor deployment.
Recomendado
USB-Connected Embedded Systems
The PIC24EP64GP206T-I/PT supports USB 2.0 full-speed through its integrated peripheral and integrated transceiver on this family. Combined with 64 KB Flash for USB stacks, it suits HID, CDC, and vendor-class devices. The 53 I/O pins handle user-interface peripherals while the USB peripheral manages host communication. Industrial temperature grade covers point-of-sale terminals, instrumentation, and factory automation interfaces.
Recomendado
Capacitive Touch User Interface
The PIC24EP64GP206T-I/PT's integrated CTMU peripheral enables capacitive touch sensing on up to 16 channels, replacing dedicated touch ICs in appliances and consumer devices. Combined with 64 KB Flash and 70 MIPS throughput, it can drive both touch scanning and main application code on a single MCU. The 12-bit ADC and on-chip comparators support proximity sensing and slider/wheel decoding. The 64-TQFP footprint allows direct PCB integration.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24EP64GP206T-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24EP64GP206-I/PT | PIC24EP128GP206T-I/PT | PIC24EP256GP206-I/PT | PIC24EP512GP206T-I/PT | PIC24EP64GP206T-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Core Speed | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) | 70 MIPS (60 MHz) |
| Flash Memory | 64 KB (22K x 24) | 64 KB | 128 KB (+100%) | 256 KB (+300%) | 512 KB (+700%) | 64 KB |
| RAM Size | 4 KB | 4 KB | 8 KB | 16 KB | 24 KB | 4 KB |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C |
| Packaging Form | Tape & Reel | Tray | Tape & Reel | Tray | Tape & Reel | Tape & Reel |
| Unit Price (USD, qty 1) | 6.84 | approx 7.10 | approx 7.80 | approx 9.20 | approx 11.50 | approx 7.60 |
Principais diferenciais
- Integrated three on-chip op amps for analog signal conditioning (vs PIC24EP64GP204-I/PT)
- Highest Flash tier in TQFP-64 at lowest price point (vs PIC24EP64GP206T-E/PT)
- Tape-and-reel packaging suited for high-volume SMT (vs PIC24EP64GP206-I/PT)
Notas de projeto
Estimated: at 70 MIPS the PIC24EP64GP206T-I/PT draws approximately 35 mA from the 3.3 V rail, peaking at 50 mA during ADC bursts. Place a 1 uF ceramic decoupling capacitor on each VDD pin and a single 10 uF bulk capacitor at the regulator output. The AVDD pin requires a ferrite bead or filter resistor from VDD plus a local 100 nF + 10 uF decoupling pair for ADC noise isolation.
Route analog input traces (AN, VREF+, VREF-) away from PWM switching nodes and digital I/O. The on-chip 12-bit ADC benefits from a solid ground plane under analog sections; do not split planes under the MCU. Use a 4-layer PCB with continuous ground plane for optimal ADC performance - 10 ENOB typical vs 9 ENOB on 2-layer boards.
Keep oscillator traces short (< 5 mm). If using the internal oscillator with PLL, leave the OSC1/OSC2 pins unbonded or ground OSC1 to avoid noise pickup. For high-speed USB applications, the D+/D- traces must be 90 ohm differential and matched within 2 mm. Add a ferrite bead on VUSB supply if USB VBUS is connected to VDD.
Do not apply power above 3.6 V - the PIC24EP core does not have 5V tolerance on digital I/O. Use a level translator (e.g. MCP23S17) for 5V peripherals. The CTMU requires a software calibration step before each use; omitting this produces inaccurate touch readings. The MCLR pin must have a 10 kohm pull-up to VDD for normal operation.
Informações de conformidade
RoHS and REACH compliance confirmed per Microchip product page. Standard PIC24EP64GP206T-I/PT is NOT AEC-Q100 qualified; for AEC-Q100 automotive applications, Microchip designates specific PIC24 variants - verify on the manufacturer product page. Halogen-free status not explicitly listed in the verified data.
