PIC24F16KA101-E/P - 16-Bit 32MHz XLP Microcontroller
Référence : PIC24F16KA101-E/P ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
PIC24F16KA101-E/P Présentation
A microcontroller is a programmable integrated circuit that combines a processor core, memory, digital I/O, timers, and communication peripherals on one semiconductor device. The PIC24F16KA101 belongs to the PIC24 family of 16-bit general-purpose Flash microcontrollers. Its XLP design targets battery-powered and power-constrained products by emphasizing reduced operating consumption and low-power sleep behavior.
Verified product information identifies nanoWatt XLP technology, deep-sleep features including DSBOR and DSWDT, and an RTCC. The device provides 16KB of program memory, 1.5KB of RAM, 18 I/O pins, an internal oscillator, and a maximum speed of 32MHz. These features make it suitable for embedded control, battery-operated instrumentation, low-power sensing, and compact consumer equipment where a 16-bit architecture and integrated Flash memory are useful.
The 32MHz operating speed supports timely execution of control logic and peripheral servicing, while the 18 I/O pins provide connections for sensors, indicators, actuators, and external interfaces. XLP power-management functions help systems spend more time in low-power states, although final battery life depends on the application’s wake frequency, active peripherals, supply voltage, and firmware configuration. The internal oscillator can reduce external clock-component requirements.
The /P ordering suffix corresponds to the 20-pin DIP package in verified distributor results. In contrast, /SO denotes a 20-pin SOIC package, /MQ denotes a 20-pin QFN package, and /I/P denotes an industrial-temperature variant. Engineers should therefore check the full suffix rather than treating every PIC24F16KA101 package option as mechanically interchangeable.
For design implementation, verify the exact package pinout, oscillator settings, peripheral availability, and programming configuration in the Microchip datasheet before layout. Use the device’s low-power modes only after validating wake-up sources and timing in hardware. The verified data does not provide detailed electrical limits, EEPROM capacity, supply voltage, or operating-temperature limits for this exact suffix, so those values must be confirmed from the manufacturer documentation.
This page combines the verified Microchip product description, distributor specifications, package information, and low-power feature details to support component identification and engineering comparison. It distinguishes the exact /P ordering code from other package and temperature variants while keeping unverified technical values explicitly marked for further review.
Alternatives de remplacement direct pour PIC24F16KA101-E/P — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24F16KA101-E/P (même facteur de forme et même empreinte) — différant par Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesPIC24F16KA101-E/P Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit Flash microcontroller |
| Program Memory Size | 16KB (5.5K x 24) |
| RAM Size | 1.5K x 8 |
| Maximum Speed | 32MHz |
| Number of I/O Pins | 18 |
| Oscillator Type | Internal |
| Low-Power Technology | XLP nanoWatt technology |
| Deep-Sleep Features | DSBOR and DSWDT |
| Real-Time Clock Peripheral | RTCC |
| Boîtier | 20-pin DIP (20-PDIP) |
| Type de montage | Through-hole |
| Packaging | Tube |
| Architecture | PIC24 16-bit architecture |
| Type de mémoire | Flash program memory |
Guide de configuration des broches du PIC24F16KA101-E/P 20-pin dip (20-pdip)
Configuration des broches du PIC24F16KA101-E/P (boîtier 20-pin dip (20-pdip)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC24F16KA101-E/P.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC24F16KA101-E/P convient pour 6 applications: Battery-Powered Sensor Node, Low-Power Industrial Monitoring, Battery-Powered Environmental Instrument, Compact Embedded Control System, Low-Power Data Logger, Battery-Backed Security and Access Controller.
Battery-Powered Sensor Node
PIC24F16KA101-E/P fits battery-powered sensor nodes because its 16-bit PIC24 core operates up to 32MHz while the XLP platform emphasizes low-power consumption. The 16KB Flash memory can hold acquisition, filtering, and communication-control firmware, while 1.5KB RAM supports working buffers. DSBOR and DSWDT deep-sleep features can reduce activity during idle periods, but the designer must define wake sources and validate actual battery life. The 18 I/O pins provide interfaces for sensors, status indicators, and actuator control without requiring a separate low-power MCU.
Recommandé
Low-Power Industrial Monitoring
The PIC24F16KA101-E/P is suitable for industrial monitoring modules that periodically sample sensors and remain idle between measurements. Its 16-bit architecture, 32MHz maximum speed, and 16KB Flash provide room for control firmware, while the 18 I/O pins support digital sensors, relay or alarm outputs, and status signaling. XLP, DSBOR, and DSWDT features help the design spend time in reduced-power states. The exact pin multiplexing, electrical limits, and environmental ratings must be checked in the manufacturer documentation before industrial deployment.
Recommandé
Battery-Powered Environmental Instrument
For environmental instruments, the PIC24F16KA101-E/P combines a 16-bit processor with 16KB Flash, 1.5KB RAM, and 18 I/O pins in a 20-PDIP package. Those resources can support sampling schedules, threshold logic, calibration data, and local status reporting in a compact through-hole design. The RTCC provides a real-time-clock peripheral for time-related functions, while XLP low-power features can help extend intervals between readings. Sensor analog interfaces and required accuracy are not specified in the verified data, so those details require datasheet confirmation.
Recommandé
Compact Embedded Control System
PIC24F16KA101-E/P can serve as the control core in a compact embedded product that combines sensing, decision logic, and local actuation. Its 32MHz maximum speed provides responsive task execution, while the 16KB program memory and 1.5KB RAM are suitable for moderate firmware complexity. Eighteen I/O pins support switches, indicators, drivers, and external logic. The through-hole 20-PDIP package can simplify prototype assembly and rework, although production designs should verify pin clearances, thermal performance, and any required compliance documentation.
Recommandé
Low-Power Data Logger
A low-power data logger can use PIC24F16KA101-E/P for periodic sampling, event detection, and short bursts of local processing. The 16KB Flash provides code storage for acquisition routines and communication protocols, and the 1.5KB RAM can hold transient measurement data. XLP, DSBOR, and DSWDT are relevant because logger designs often spend substantial time asleep between records. The exact data-retention method, available Data EEPROM capacity, and serial-interface requirements are not provided in the verified data and must be established before selecting a nonvolatile storage strategy.
Recommandé
Battery-Backed Security and Access Controller
The PIC24F16KA101-E/P can support a compact access-control or security peripheral that checks local inputs and drives indicators, locks, or alarm outputs. Its 18 I/O pins allow connection to buttons, sensors, displays, and control signals, while the 16-bit core and 32MHz speed support time-based control logic. XLP features can help reduce consumption when the device is idle, but security-sensitive designs must verify watchdog, code-protection, clock, and certification requirements in the manufacturer documentation. Those features were not quantified in the supplied verified data.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24F16KA101-E/P — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Microchip Technology |
| Product Type | 16-bit Flash microcontroller |
| Program Memory | 16KB (5.5K x 24) |
| RAM | 1.5K x 8 |
| Maximum Speed | 32MHz |
| I/O Pins | 18 |
| Package | 20-pin DIP (20-PDIP) |
| Low-Power Features | XLP, DSBOR, DSWDT, RTCC |
Principaux différenciateurs
- Low-power positioning (vs PIC24F16KA101-E/SO)
- Through-hole assembly (vs PIC24F16KA101-E/SO)
- Low-power feature set (vs PIC24F16KA101-I/P)
Notes de conception
Use the XLP, DSBOR, and DSWDT features as part of a measured power-management strategy rather than assuming a fixed battery-life benefit. Define which peripherals remain enabled, how often the MCU wakes, and which events trigger DSBOR or DSWDT. Prototype the complete load path because active current, sleep current, and wake-up timing are not provided in the verified data and depend on firmware and board configuration.
Treat PIC24F16KA101-E/P as a 20-pin through-hole DIP device. Follow the exact Microchip package drawing when assigning VDD, VSS, programming, oscillator, reset, and I/O connections; the supplied data does not provide a complete public pin list. Preserve socket clearance and avoid placing tall components where they interfere with the socket, connector, or enclosure. Confirm the final pinout against the current datasheet before fabrication.
Do not substitute PIC24F16KA101-E/SO, -I/MQ, or other family variants solely because the base MPN matches. The verified data shows /P as a 20-PDIP device, while /SO is listed as 20-SOIC and /MQ as 20-QFN; those packages are not mechanically drop-in. Likewise, the I/P suffix may represent a different temperature or qualification option. Verify the complete ordering code, pinout, electrical limits, and temperature requirements before approving a substitution.
The verified snippets establish 16KB Flash, 1.5KB RAM, 18 I/O pins, 32MHz maximum speed, and XLP low-power features, but they do not establish supply voltage, Data EEPROM capacity, timer counts, analog specifications, or RoHS status. Mark these values as data needed in engineering documentation and verify them from the official Microchip datasheet. Avoid designing power, storage, or compliance requirements around inferred values.
Informations de conformité
The supplied verified sources do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for PIC24F16KA101-E/P. Verify current compliance documentation with Microchip or the selected authorized distributor.
