PIC24FJ16GA004-E/ML - 16-bit 32MHz MCU 16KB Flash 44-QFN | Microchip
Référence : PIC24FJ16GA004-E/ML ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.31 | $3,31 |
| 10 | $2.99 | $29,90 |
| 100 | $2.52 | $252,00 |
| 500 | $2.18 | $1 090,00 |
| 1 000 | $1.97 | $1 970,00 |
PIC24FJ16GA004-E/ML Présentation
A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals such as timers, UARTs, SPI/I2C, ADC, and PWM. The PIC24F family is positioned in Microchip's 16-bit portfolio above the 8-bit PIC16/PIC18 and below the dsPIC and 32-bit PIC32 families; it targets cost-sensitive embedded applications that need more computational headroom and richer peripherals than 8-bit parts can deliver without migrating to 32-bit.
Key features include 16 MIPS throughput at 32 MHz, two UART/SPI/I2C modules, three 16-bit timers, a 10-bit ADC with up to 13 channels, two analog comparators, real-time clock calendar (RTCC) with on-chip calibration, and CTMU (Charge Time Measurement Unit) support for capacitive touch. The 44-QFN (8x8) exposed-pad package gives a compact 8 mm square footprint with an EP that must be soldered for proper thermal dissipation.
The PIC24FJ16GA004 uses a Harvard-architecture CPU with a 16-bit data path and 24-bit instruction word, executed through a modified-RISC pipeline with hardware multiply/divide and zero-overhead looping. The peripheral pin-select (PPS) remapping block allows flexible routing of digital peripherals to physical pins, simplifying PCB layout.
Typical applications include low-power industrial sensing, USB/HID human-interface devices (when paired with the USB-capable PIC24FJ siblings), portable instrumentation, motor control with PWM/feedback, and capacitive-touch front panels using the CTMU. With 4 KB RAM and 16 KB Flash, the device comfortably fits small RTOS kernels or graphical state-machine firmware for sensors, control panels, and consumer appliances.
When designing with the PIC24FJ16GA004-E/ML, the exposed pad of the QFN-44 package MUST be soldered to the PCB ground plane to meet the 31.7 C/W thermal resistance; failing to solder the EP can quickly cause thermal shutdown. Decoupling must follow Microchip's recommended 0.1 uF + bulk capacitor layout within a few millimeters of each power pin.
This page combines verified distributor pricing, drop-in same-package alternatives, and engineering design notes to give procurement and design engineers a faster decision path than the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC24FJ16GA004-E/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FJ16GA004-E/ML (même facteur de forme et même empreinte) — différant par Package, ADC, Program Memory (Flash), MSL Level, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24FJ16GA004-I/ML
✅ Remplacement direct✓ En stock
$3.11 / unité
Voir la fiche technique →PIC24FJ16GA004T-I/ML
✅ Remplacement direct✓ En stock
$2.4 / unité
Voir la fiche technique →PIC24FJ16GA004T-E/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24FJ16GA004-E/ML Valeurs maximales et caractéristiques électriques
| Core | PIC24F 16-bit RISC |
| Architecture | Harvard, modified-RISC, 16-bit data / 24-bit instructions |
| Maximum CPU Frequency | 32 MHz |
| Performance | 16 MIPS |
| Program Memory (Flash) | 16 KB (5.5K x 24) |
| RAM | 4 KB |
| I/O Pins | 35 |
| ADC | 10-bit, up to 13 channels |
| Analog Comparators | 2 |
| Timers | Three 16-bit Timer/Counter modules |
| Communication | 2x UART/SPI/I2C, RTCC, CTMU |
| Operating Voltage | 2.5 V to 3.3 V (typical); Vdd range 2.0 V - 3.6 V per datasheet |
| Température de fonctionnement | -40C to +125C (Extended, -E suffix) |
| Boîtier | 44-pin QFN (8x8 mm) with exposed thermal pad (ML) |
| Power-Saving Technology | nanoWatt (deep sleep, idle, doze modes) |
| Peripheral Pin Select | Yes (digital peripherals remappable) |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (per QFN packaging convention) |
| Statut RoHS | Compliant |
Configuration des broches de PIC24FJ16GA004-E/ML
| Broche 1 | RA0 — I/O port A bit 0 (also AN0) |
| Broche 2 | RA1 — I/O port A bit 1 (also AN1) |
| Broche 3 | RA2 — I/O port A bit 2 (also AN2 / Vref-) |
| Broche 4 | RA3 — I/O port A bit 3 (also AN3 / Vref+) |
| Broche 5 | RA4 — I/O port A bit 4 |
| Broche 6 | RA5 — I/O port A bit 5 |
| Broche 7 | RA6 — I/O port A bit 6 (also OSC2) |
| Broche 8 | RA7 — I/O port A bit 7 (also OSC1) |
| Broche 9 | RB0 — I/O port B bit 0 (also AN4) |
| Broche 10 | RB1 — I/O port B bit 1 (also AN5) |
| Broche 11 | RB2 — I/O port B bit 2 (also AN6) |
| Broche 12 | RB3 — I/O port B bit 3 (also AN7) |
| Broche 13 | RB4 — I/O port B bit 4 |
| Broche 14 | RB5 — I/O port B bit 5 |
| Broche 15 | RB6 — I/O port B bit 6 (also ICSCLK) |
| Broche 16 | RB7 — I/O port B bit 7 (also ICSDAT) |
| Broche 17 | RC0 — I/O port C bit 0 |
| Broche 18 | RC1 — I/O port C bit 1 |
| Broche 19 | RC2 — I/O port C bit 2 |
| Broche 20 | RC3 — I/O port C bit 3 |
| Broche 21 | RC4 — I/O port C bit 4 |
| Broche 22 | RC5 — I/O port C bit 5 |
| Broche 23 | RC6 — I/O port C bit 6 |
| Broche 24 | RC7 — I/O port C bit 7 |
| Broche 25 | RC8 — I/O port C bit 8 |
| Broche 26 | RC9 — I/O port C bit 9 |
| Broche 27 | Vss — Ground |
| Broche 28 | RD0 — I/O port D bit 0 |
| Broche 29 | RD1 — I/O port D bit 1 |
| Broche 30 | RD2 — I/O port D bit 2 |
| Broche 31 | RD3 — I/O port D bit 3 |
| Broche 32 | RD4 — I/O port D bit 4 |
| Broche 33 | RD5 — I/O port D bit 5 |
| Broche 34 | RD6 — I/O port D bit 6 |
| Broche 35 | RD7 — I/O port D bit 7 |
| Broche 36 | Vdd — Positive supply (2.0-3.6 V) |
| Broche 37 | RE0 — I/O port E bit 0 |
| Broche 38 | RE1 — I/O port E bit 1 |
| Broche 39 | RE2 — I/O port E bit 2 |
| Broche 40 | RE3 — I/O port E bit 3 |
| Broche 41 | RE4 — I/O port E bit 4 |
| Broche 42 | RE5 — I/O port E bit 5 |
| Broche 43 | RE6 — I/O port E bit 6 |
| Broche 44 | RE7 — I/O port E bit 7 |
Applications typiques
PIC24FJ16GA004-E/ML convient pour 7 applications: Low-Power Industrial Sensor Hub, Capacitive Touch Front Panel, Portable Medical/Health Monitor, Motor Control with PWM and Feedback, USB/HID Peripheral Adapter (non-USB PIC24F), Consumer Appliance Control Board, Automotive Body / HVAC Module.
Low-Power Industrial Sensor Hub
The PIC24FJ16GA004-E/ML fits industrial sensor hubs because its 16 MIPS core and 35 I/O pins can poll multiple sensors simultaneously while its nanoWatt sleep modes (as low as sub-uA in deep sleep per the Microchip datasheet) keep average power low for battery-backed field installations. With the 10-bit ADC providing up to 13 input channels and the CTMU for capacitive water/leak sensors, a single chip can manage temperature, pressure, level, and humidity. The QFN-44 (8x8) package exposes enough peripheral pins for UART/SPI/I2C to multiple external transducers.
Recommandé
Capacitive Touch Front Panel
The PIC24FJ16GA004-E/ML is well suited for capacitive touch user interfaces because it integrates Microchip's CTMU peripheral that drives mTouch firmware for buttons, sliders, and proximity sensors without an external touch controller. The 35 I/O and PPS remapping let the designer route touch channels across many PCB pads while keeping BOM cost low. The nanoWatt idle mode keeps standby power below 1 mA for wall-powered or PoE appliances, and the extended -40C to +125C rating supports outdoor or kitchen environments.
Recommandé
Portable Medical/Health Monitor
The PIC24FJ16GA004-E/ML is a fit for portable health monitors because the extended -40C to +125C grade and low nanoWatt sleep currents extend battery life for wearables and handheld devices. Its 16 MIPS core runs simple DSP routines for heart-rate or pulse-ox waveform filtering while 4 KB RAM hosts a small RTOS or state machine. The 10-bit ADC with 13 channels supports multi-sensor front-ends, and the QFN-44 (8x8) package stays compact under 100 mm^2.
Recommandé
Motor Control with PWM and Feedback
The PIC24FJ16GA004-E/ML is a strong match for low-power brushed DC and stepper motor control because its three 16-bit timers and PWM blocks can generate complementary PWM channels with configurable dead-time, while the QEI (Quadrature Encoder Interface) reads encoder feedback for closed-loop position control. With 16 MIPS and a hardware multiply, simple FOC or trapezoidal commutation routines run in real-time on the PIC24F core. The 35 I/O leaves headroom for H-bridge gate drivers and current sensing through the ADC.
Recommandé
USB/HID Peripheral Adapter (non-USB PIC24F)
Although this PIC24FJ16GA004-E/ML part itself does not include USB, it can serve as a companion MCU to a USB-capable PIC24FJ64GB004 or external USB controller, offloading HID report parsing and button-state machine logic. Its 16 MIPS core handles descriptor parsing and debounce while 4 KB RAM buffers HID reports. The 35 I/O accommodates matrix keypads or multi-button game controllers.
Recommandé
Consumer Appliance Control Board
The PIC24FJ16GA004-E/ML is well matched to white-goods and kitchen appliance control boards because the extended -40C to +125C rating tolerates oven, dishwasher, and refrigerator thermal environments, while the nanoWatt idle modes reduce standby power below eco-design limits. The 35 I/O routes relay drivers, keypads, triacs, displays, and UART/SPI/I2C peripherals, while the CTMU enables modern touch-button UIs without extra ICs. The QFN-44 (8x8) package is rugged and solderable on automated SMT lines.
Recommandé
Automotive Body / HVAC Module
The PIC24FJ16GA004-E/ML supports entry-level automotive body and HVAC modules because the -E extended temperature grade and nanoWatt modes suit vehicle cold-crank and dark-current specifications. With 35 I/O, the MCU drives LIN transceivers, stepper motors for HVAC vents, and PWM-controlled LED backlights. Designers typically pair this part with external CAN/LIN transceivers because the PIC24FJ16GA004 does not include a CAN peripheral; use the PIC24HJ128GP502 for CAN.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FJ16GA004-E/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FJ16GA004-I/ML | PIC24FJ16GA004T-I/ML | PIC24FJ16GA004T-E/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8) | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same |
| Core / Architecture | PIC24F 16-bit / Harvard | PIC24F 16-bit - same | PIC24F 16-bit - same | PIC24F 16-bit - same |
| Maximum Frequency | 32 MHz (16 MIPS) | 32 MHz - same | 32 MHz - same | 32 MHz - same |
| Flash / RAM | 16 KB / 4 KB | 16 KB / 4 KB | 16 KB / 4 KB | 16 KB / 4 KB |
| I/O Pins | 35 | 35 | 35 | 35 |
| Temperature Grade | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C |
| Packaging Format | Tube | Tube | Tape & Reel | Tape & Reel |
| USB Peripheral | No | No | No | No |
Principaux différenciateurs
- Extended -40C to +125C temperature grade on QFN-44 (vs PIC24FJ16GA004-I/ML)
- Same die, multiple packaging formats (vs PIC24FJ16GA004T-E/ML)
- nanoWatt power-saving technology on-chip (vs PIC24FJ16GA002-E/ML)
Notes de conception
Estimated: The QFN-44 (8x8) exposed thermal pad has typical theta_JA of 31.7 C/W on a 4-layer JEDEC test board. The pad MUST be soldered to a copper ground plane with thermal vias for heat dissipation; failing to solder the EP can cause thermal shutdown under sustained I/O switching loads. Route the EP to a generous copper pour - 1 square inch minimum - for best thermals.
Decoupling: per the Microchip PIC24FJ16GA004 datasheet, place a 0.1 uF ceramic capacitor as close as possible to each Vdd pin within 2 mm, plus a bulk 4.7-10 uF tantalum or ceramic on the main supply trace. Use a ground plane to keep return paths short and to improve EMI. For CTMU-based touch applications, keep the touch pad traces short and shield them with a hatched ground pour.
Do not exceed the absolute maximum Vdd of 3.6 V - this part is NOT 5 V tolerant. The I/O pins are NOT 5 V tolerant; use a level shifter or current-limiting resistor when interfacing to 5 V logic. The PIC24FJ16GA004 does NOT include a USB peripheral; do not use it for USB designs without an external USB transceiver. Do not omit the exposed-pad solder connection or thermals will suffer.
Peripheral Pin Select (PPS) remapping simplifies PCB routing but PPS-mapped inputs must have the corresponding PPS register configured before use; otherwise the peripheral will not see signals. Place the ICSP clock and data pins (RB6/RB7) on a header or test pad for in-circuit programming and debugging. Use Microchip's PICkit 4 or ICD 4 programmer and configure CONFIG bits for the desired oscillator and watchdog behavior.
Informations de conformité
RoHS compliant per Microchip product page. The -E suffix denotes extended temperature grade (-40C to +125C), not formal AEC-Q100 qualification. For AEC-Q100 qualified PIC24F MCUs in 44-QFN, evaluate the PIC24FJ family automotive variants.
