Microchip Technology

PIC24FJ16MC101-E/SO - 16-Bit 32MHz Motor Control MCU | Microchip

Référence : PIC24FJ16MC101-E/SO ✓ Actif
3.3 V Vdss 20-pin SOIC Package 32 MHz Speed 16 KB Flash (5.5K words x 24 bits) Memory
MOQ : 1 |

PIC24FJ16MC101-E/SO Présentation

The Microchip Technology PIC24FJ16MC101-E/SO is an automotive-grade, 16-bit PIC24 motor-control microcontroller with 32 MHz maximum operating frequency, 16 MIPS instruction throughput, 16 KB of Flash program memory, and 1 KB of SRAM in a 20-pin SOIC package. It combines CTMU, MCPWM, peripheral pin select, and low-pin-count motor-control capabilities for compact embedded systems.

A PIC24 is a 16-bit microcontroller within Microchip's modified Harvard processor family. Its architecture separates program memory from data memory, uses a 24-bit instruction word, and supports variable-length instructions for efficient control-loop code. The PIC24FJ16MC101 specifically targets low-cost motor-control, appliance, and compact embedded-control applications where deterministic peripherals, modest memory, and a small package are more important than a large general-purpose application processor.

The device provides 16 KB of Flash program memory organized as 5.5K words by 24 bits, together with 1 KB of SRAM. Its 16 MIPS execution rate supports rapid sampling and control calculations. Integrated CTMU supports capacitive measurement, MCPWM peripherals provide complementary or independent motor-drive outputs, and PPS supports precise synchronization with external timing devices. The manufacturer product page identifies CTMU, MCPWM, PPS, advanced peripherals, and small-footprint options as defining features of this family.

The PIC24FJ16MC101-E/SO operates from a 3.3 V supply and is specified for an automotive temperature range extending from -40°C to +125°C. The -E/SO ordering combination identifies the extended automotive device in a 20-pin SOIC package. Its 20-pin footprint is suitable for compact motor controllers, two- and three-phase BLDC arrangements, fan controllers, pump controls, and compact power tools where a high-pin-count controller would add unnecessary board area.

Typical designs use the MCPWM outputs to drive inverter or half-bridge power stages, use CTMU for touch or position-related sensing, and employ the 16-bit timer and interrupt architecture for deterministic loop timing. The 16 KB Flash limit requires careful code organization for complex protocols or graphical interfaces. A 1 KB SRAM allocation is suitable for motor-control state variables but generally calls for external memory in applications that retain large buffers.

For PCB implementation, follow the pin-description table in the Microchip data sheet when assigning the multiplexed digital, analog, communications, and motor-control functions. Keep decoupling capacitors close to the supply pins, provide adequate copper and return paths for switching-current loops, and confirm that every unused input is configured appropriately in firmware.

This page consolidates the manufacturer specifications, available package and ordering information, verified drop-in candidates, and practical guidance for firmware, layout, and motor-drive implementation. It helps engineers evaluate the PIC24FJ16MC101-E/SO without treating a similarly named family member as an automatic replacement.

Alternatives de remplacement direct pour PIC24FJ16MC101-E/SO — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec PIC24FJ16MC101-E/SO (même facteur de forme et même empreinte) — différant par Operating Temperature, Package.

Microchip Technology
Operating Temperature: -40 C to +85 C
Package: 20-pin SOIC (7.50 mm body width)

PIC24FJ16MC101-I/SO

✅ Remplacement direct
Microchip Technology
📦 20-pin SOIC
PIC24F · 16-bit Modified Harvard RISC · Flash · 16 KB (5.5K x 24 words) · 1 KB · 16 MIPS at 32 MHz · 3.0 V to 3.6 V · -40 C to +85 C

Contactez-nous pour le prix

Voir la fiche technique →

PIC24FJ16MC101-E/SO Valeurs maximales et caractéristiques électriques

Product Type 16-bit motor-control microcontroller
CPU Architecture Modified Harvard architecture
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Program Memory 16 KB Flash (5.5K words x 24 bits)
Data Memory 1 KB SRAM
Tension d'alimentation 3.3 V
Température de fonctionnement -40°C to +125°C
Boîtier 20-pin SOIC
Package Width 7.50 mm
Motor-Control Peripheral MCPWM
Capacitive Touch Peripheral CTMU
Peripheral Pin Select PPS supported
ADC Resolution 10-bit
Automotive Qualification AEC-Q100
Instruction Word Length 24-bit
Type de montage Surface mount

Guide de configuration des broches du PIC24FJ16MC101-E/SO 7.50 mm

Configuration des broches du PIC24FJ16MC101-E/SO (boîtier 7.50 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 7.50 mm pour le PIC24FJ16MC101-E/SO

Aucune donnée de brochage détaillée disponible pour PIC24FJ16MC101-E/SO.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

PIC24FJ16MC101-E/SO convient pour 6 applications: Compact BLDC Motor Controller, Automotive Actuator Control, Fan and Pump Speed Control, Capacitive Touch Control Panel, Small Power Tool Controller, Precision Timing and Synchronization.

🏭

Compact BLDC Motor Controller

The PIC24FJ16MC101-E/SO fits compact brushless DC motor controllers because its 16 MIPS processing rate supports timely current sampling and control calculations, while the MCPWM peripherals simplify complementary or independent drive waveform generation. The 3.3 V supply and 20-pin SOIC footprint preserve board area in space-constrained appliances and power tools. Designers can use the 16 KB Flash for the main control loop and 1 KB SRAM for state variables, provided code and stack requirements remain within those limits. The -40°C to +125°C range and AEC-Q100 designation are useful when ambient and enclosure temperatures exceed conventional industrial limits. The external MOSFET gate driver, shunt or sensing network, and fault shutdown path remain separate system-design responsibilities.

🚗

Automotive Actuator Control

The PIC24FJ16MC101-E/SO is suitable for compact automotive actuator modules where an extended -40°C to +125°C operating range and AEC-Q100 device identification are important. Its 16-bit CPU, 16 MIPS throughput, and motor-control peripherals support responsive closed-loop positioning, valve, pump, or latch control without requiring a larger automotive MCU. The 20-pin SOIC package leaves room for a power stage and protection circuitry on a small controller board. Firmware should include diagnostic handling, safe-state defaults, and fault responses because MCU qualification does not validate the complete automotive subsystem. Confirm the external power-transistor ratings, load transients, electromagnetic compatibility, and production traceability requirements for the finished vehicle platform.

⚡

Fan and Pump Speed Control

The PIC24FJ16MC101-E/SO can control small brushless fans, circulation pumps, and appliance motors where variable speed, fault monitoring, and compact packaging are priorities. The MCPWM outputs provide the timing needed for electronic commutation, while the 32 MHz CPU and 16 MIPS throughput support speed estimation and closed-loop regulation. Its 1 KB SRAM is adequate for compact control state when the firmware avoids large history buffers, and the 16 KB Flash can host a focused control application. The 20-pin SOIC footprint also allows reuse of the same physical design across different temperature-grade order codes when qualification permits. Designers should add protections for stalled loads, reverse polarity, supply transients, and switch-node ringing according to the motor and power-stage characteristics.

🧩

Capacitive Touch Control Panel

The PIC24FJ16MC101-E/SO is useful in small appliances and industrial controls that combine touch input with motor or actuator control. Its CTMU peripheral supports capacitive measurement, allowing the MCU to evaluate touch electrodes while retaining the same compact 20-pin SOIC package used for control functions. The 16-bit CPU and 16 MIPS throughput can service timing-sensitive measurement and motor-control tasks, while 1 KB SRAM limits how many simultaneous touch channels and filtered data sets can be buffered. CTMU performance depends on careful electrode layout, guarding, filtering, and calibration in firmware. Keep high-current switching paths away from sensitive sensor traces and validate noise immunity with the final power stage operating, because coupling can change measured capacitance and false-touch behavior.

🔧

Small Power Tool Controller

The PIC24FJ16MC101-E/SO can serve as the digital controller in a compact power-tool or appliance drive system where high ambient temperatures and vibration are expected. The 32 MHz CPU provides enough performance for PWM generation, current feedback, and protection sequencing, while the MCPWM peripheral reduces the timing burden on the CPU. The -E/SO grade is identified for -40°C to +125°C operation and AEC-Q100 qualification, supporting designs exposed to thermal stress. Its 16 KB Flash and 1 KB SRAM are suitable for focused control firmware without a separate logic device. However, a robust implementation must include independent hardware shutdown, current limiting, thermal derating, and watchdog strategy. Firmware and layout should be tested together because high dv/dt switching can couple into analog and control signals.

🖥️

Precision Timing and Synchronization

The PIC24FJ16MC101-E/SO is appropriate for compact embedded modules that must coordinate motor timing with external clocks or precision peripherals. PPS allows the device to route selected timing events to an external device, while the 16-bit modified Harvard CPU supports efficient control and interrupt handling. The 32 MHz operating frequency provides a useful balance between processing capability, memory footprint, and power-conscious design in a 20-pin SOIC package. Synchronization accuracy depends on selecting the correct PPS source, configuring timer prescaling, and accounting for interrupt latency in firmware. Keep the reference signal path short and away from switch-node copper, use an appropriate ground reference, and validate timing across voltage and temperature because external oscillator characteristics and propagation delays contribute to the final system budget.

Récapitulatif des produits recommandés

PIC24FJ16MC102 Related PIC24FJ16 motor-control family member Utilisé dans : Compact BLDC Motor Controller, Capacitive Touch Control Panel, Small Power Tool Controller PIC24FJ32MC101 Related PIC24FJ32 motor-control family member Utilisé dans : Compact BLDC Motor Controller, Automotive Actuator Control, Fan and Pump Speed Control, Precision Timing and Synchronization PIC24FJ32MC102 Related PIC24FJ32 automotive motor-control family Utilisé dans : Automotive Actuator Control, Small Power Tool Controller PIC24FJ16MC101 Base member of the PIC24FJ16 motor-control family Utilisé dans : Fan and Pump Speed Control, Precision Timing and Synchronization PIC24FJ32MC104 Related PIC24FJ32 family member Utilisé dans : Capacitive Touch Control Panel, Precision Timing and Synchronization
What are the key specifications of PIC24FJ16MC101-E/SO?
The PIC24FJ16MC101-E/SO is a 16-bit motor-control microcontroller with 32 MHz maximum frequency, 16 MIPS throughput, 16 KB of Flash memory, 1 KB of SRAM, and a 20-pin SOIC package. According to the Microchip product page and manufacturer data sheet, it also includes CTMU, MCPWM, PPS, and a 3.3 V operating supply. The device is marked as AEC-Q100 automotive-grade and operates across -40°C to +125°C.
Where can I download the PIC24FJ16MC101-E/SO datasheet PDF?
The official Microchip family data sheet can be downloaded from the Microchip document server using the PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 PDF URL. It covers the PIC24FJ16MC101-E/SO device, pin descriptions, electrical characteristics, and family peripherals. Use the manufacturer's PDF together with the PIC24 product page for current lifecycle and ordering information.
Where is the PIC24FJ16MC101-E/SO pinout located?
The PIC24FJ16MC101-E/SO pinout is in the pin-description table and package drawings in the Microchip family data sheet. The exact function assigned to each 20-pin SOIC lead depends on the device configuration, so the pin table should be used when assigning MCU, analog, communications, and motor-control signals. The exposed package drawing also defines the recommended PCB land pattern.
Can PIC24FJ16MC101-I/SO replace PIC24FJ16MC101-E/SO?
The PIC24FJ16MC101-I/SO is the closest identified same-package alternative because both use a 20-pin SOIC and share the same 16-bit, 32 MHz, 16 KB Flash, and 1 KB SRAM platform. The important difference is qualification and temperature grade: the -E/SO is identified as AEC-Q100 automotive-grade and supports -40°C to +125°C, whereas the -I/SO ordering code denotes the industrial-temperature option. Verify the exact temperature limits and qualification requirements before substitution.
Is PIC24FJ16MC101-E/SO suitable for automotive motor control?
The PIC24FJ16MC101-E/SO is identified as an AEC-Q100 automotive-grade device with a -40°C to +125°C operating range. Its 16 MIPS performance, MCPWM peripherals, CTMU, and PPS features support compact automotive and appliance motor-control designs. Automotive qualification of the MCU does not by itself qualify the complete motor-drive module; the power stage, passive components, firmware validation, and system-level requirements must also be assessed.
What is the difference between PIC24FJ16MC101-E/SO and PIC24FJ16MC101-I/SO?
Both devices occupy the 20-pin SOIC footprint and use the 16-bit PIC24 motor-control platform with 32 MHz performance, 16 KB Flash, and 1 KB SRAM. The key ordering difference is the device grade: PIC24FJ16MC101-E/SO is identified as automotive-grade AEC-Q100 and rated to +125°C, while the -I/SO version represents the industrial-temperature ordering option. Confirm the complete electrical limits in the manufacturer data sheet before substitution.
When should I choose PIC24FJ16MC101-E/SO over PIC24FJ16MC101-I/SO?
Choose PIC24FJ16MC101-E/SO when the design requires the automotive-grade, extended-temperature version of the 20-pin motor-control MCU. Both parts share the same core memory and package basis, but grade qualification is the decisive distinction. Choose the -I/SO option for industrial-temperature requirements that do not need the -E/SO automotive ordering designation, after confirming its temperature limits against the system specification.
What is the best drop-in replacement for PIC24FJ16MC101-E/SO?
The best directly identified package-compatible candidate is the PIC24FJ16MC101-I/SO, which uses the same 20-pin SOIC footprint and retains the 16-bit, 32 MHz, 16 KB Flash, and 1 KB SRAM configuration. Its grade and temperature designation differ from the automotive -E/SO version, so it is not equivalent for every automotive requirement. No cross-brand drop-in replacement with verified pin compatibility was identified.
What can replace PIC24FJ16MC101-E/SO?
The PIC24FJ16MC101-I/SO can serve as a package-compatible substitution when its temperature grade and qualification meet the application requirements. A true drop-in replacement must preserve the 20-pin SOIC land pattern, pin functions, 3.3 V supply, memory configuration, and motor-control peripheral assignments. Other PIC24FJ16MC101 package or temperature variants should not be treated as drop-in without a pin-by-pin comparison.
Where can I buy PIC24FJ16MC101-E/SO online?
Use the Request a Quote form on this page to request PIC24FJ16MC101-E/SO pricing, availability, and lead time. The form supports direct sourcing for the exact 20-pin SOIC ordering code without requiring a change to the PCB footprint. Request the package quantity and delivery schedule together so the supplier can confirm the correct -E/SO configuration.
What is the price of PIC24FJ16MC101-E/SO?
The current price of PIC24FJ16MC101-E/SO is handled through the Request a Quote form on this page so the response reflects the exact ordering code, quantity, and current supply status. The MPN identifies the automotive-grade 20-pin SOIC configuration, and quoting that exact suffix avoids accidental substitutions with different package or temperature variants.
What is the lead time for PIC24FJ16MC101-E/SO?
Current lead time for PIC24FJ16MC101-E/SO should be requested through the Request a Quote form on this page. Include the required quantity, date code preference, and packaging method so the supplier can confirm allocation and logistics. The 20-pin SOIC package designation is part of the exact MPN and should be retained in the request.
Is PIC24FJ16MC101-E/SO in stock?
Current inventory for PIC24FJ16MC101-E/SO is confirmed through the Request a Quote form on this page. Stock status can change quickly, so a quote response should specify the quantity available, package condition, and expected shipment timing. Request the complete manufacturer ordering code PIC24FJ16MC101-E/SO to avoid receiving a different package or grade.
How much Flash and SRAM does PIC24FJ16MC101-E/SO provide?
The PIC24FJ16MC101-E/SO provides 16 KB of Flash program memory, specified as 5.5K words by 24 bits, and 1 KB of SRAM. According to the Microchip manufacturer data sheet, the device uses a 24-bit instruction word and a modified Harvard architecture. The memory size supports compact motor-control firmware, but large protocol stacks, logs, or display buffers may require careful memory budgeting.
What peripherals support PIC24FJ16MC101 motor-control designs?
The PIC24FJ16MC101 includes MCPWM peripherals, CTMU, PPS, and other advanced peripherals highlighted by Microchip for this family. MCPWM supports deterministic motor-drive waveform generation, CTMU enables capacitive measurement functions, and PPS provides precise peripheral synchronization. According to the manufacturer data sheet, the 16 MIPS CPU processes these functions in a compact 20-pin SOIC package.

Données de référence d'ingénierie pour PIC24FJ16MC101-E/SO — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose PIC24FJ16MC101-E/SO when a compact motor-control design requires the automotive-grade ordering designation and operation from -40°C to +125°C. Its 32 MHz 16-bit core, 16 MIPS throughput, MCPWM, CTMU, PPS, 16 KB Flash, and 1 KB SRAM are well matched to focused appliance, actuator, fan, pump, and power-tool control designs. Choose PIC24FJ16MC101-I/SO when its industrial-temperature grade meets the system requirements and the PCB uses the same 20-pin SOIC land pattern. Do not choose the -E/P or -E/SS variants as direct replacements because their packages differ. If a design needs more program memory, extensive data buffering, or additional communications resources, review PIC24FJ16MC102 and PIC24FJ32MC101/102/104 family options, but verify pin compatibility because those devices may have different peripheral assignments.

Comparaison avec les alternatives

Paramètre Ce produit PIC24FJ16MC101-I/SO
Package 20-pin SOIC 20-pin SOIC
Brand Microchip Technology Microchip Technology
Product Type 16-bit motor-control microcontroller 16-bit motor-control microcontroller
Maximum CPU Frequency 32 MHz 32 MHz
Instruction Throughput 16 MIPS 16 MIPS
Flash Memory 16 KB (5.5K words x 24 bits) 16 KB
SRAM 1 KB 1 KB
Supply Voltage 3.3 V 3.3 V
Ordering Grade -E/SO automotive grade -I/SO industrial-temperature grade
Motor-Control Peripheral MCPWM MCPWM
Capacitive Touch Peripheral CTMU CTMU

Principaux différenciateurs

  • Automotive-grade ordering option (vs PIC24FJ16MC101-I/SO)
  • Compact motor-control integration (vs PIC24FJ16MC101-I/SO)
  • Direct package reuse for qualified designs (vs PIC24FJ16MC101-I/SO)

Notes de conception

Follow the Microchip package drawing and pin-description table when assigning the 20-pin SOIC footprint. Place the device-side supply bypass capacitor directly between the supply and ground pins, with a short ground return that does not pass through switching-current paths. Route MCPWM outputs toward the gate-driver or inverter section without sharing narrow copper with sensitive analog inputs. Confirm exposed-pad and thermal requirements from the package drawing before releasing the layout.

Separate the quiet MCU and sensing region from the high-current motor-drive stage. Keep CTMU electrode traces short, guarded where appropriate, and isolated from power-switching copper. Use a continuous ground reference, but avoid routing high-current return currents beneath the MCU or analog inputs. Validate the final arrangement with the power stage switching because dv/dt and common-source inductance can create measurement errors even when the schematic appears correct.

Do not assume that every PIC24FJ16MC101 ordering code is a drop-in substitute. The -E/SO and -I/SO versions share the 20-pin SOIC footprint, but their grade and temperature requirements differ. Also avoid treating the -E/P or -E/SS devices as replacements because those suffixes specify different packages. Confirm the exact pin assignment, voltage, temperature range, qualification, and programming configuration before substituting any ordering code.

The MCPWM signals should drive suitable external gate drivers or power switches rather than the motor current directly. Design the hardware shutdown path so a dangerous fault does not depend solely on firmware timing. Check supply transients, reverse-battery behavior, gate-driver voltage, and logic-level compatibility across temperature. The MCU's 3.3 V operating supply does not define the motor rail or inverter supply, which are separate from the low-voltage control domain.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The product listing identifies PIC24FJ16MC101-E/SO as automotive-grade AEC-Q100. Other environmental and material-compliance statuses are not stated.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

PIC24FJ16MC101-E/SO datasheet PIC24FJ16MC101-E/SO pinout PIC24FJ16MC101-E/SO datasheet pdf PIC24FJ16MC101-E/SO price PIC24FJ16MC101-E/SO stock PIC24FJ16MC101-E/SO equivalent PIC24FJ16MC101-E/SO replacement PIC24FJ16MC101-E/SO vs PIC24FJ16MC101-I/SO Microchip PIC24FJ16MC101-E/SO PIC24FJ16MC101 20-pin SOIC motor controller PIC24FJ16MC101 32MHz 16 MIPS MCU PIC24FJ16MC101 MCPWM CTMU application circuit

Composants & termes associés

Microchip Technology PIC24FJ16MC101-E/SO PIC24FJ16MC101-I/SO PIC24FJ16MC101 PIC24FJ16MC102 PIC24FJ32MC101 PIC24FJ32MC102 PIC24FJ32MC104 PIC24 16-bit microcontroller motor-control microcontroller modified Harvard architecture 32 MHz 16 MIPS 16 KB Flash 1 KB SRAM MCPWM CTMU PPS 3.3 V 20-pin SOIC SOIC package family surface-mount package AEC-Q100 automotive-grade semiconductor
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ