PIC24FJ16MC101-E/SO - 16-Bit 32MHz Motor Control MCU | Microchip
MPN: PIC24FJ16MC101-E/SO ✓ فعالPIC24FJ16MC101-E/SO جائزہ
A PIC24 is a 16-bit microcontroller within Microchip's modified Harvard processor family. Its architecture separates program memory from data memory, uses a 24-bit instruction word, and supports variable-length instructions for efficient control-loop code. The PIC24FJ16MC101 specifically targets low-cost motor-control, appliance, and compact embedded-control applications where deterministic peripherals, modest memory, and a small package are more important than a large general-purpose application processor.
The device provides 16 KB of Flash program memory organized as 5.5K words by 24 bits, together with 1 KB of SRAM. Its 16 MIPS execution rate supports rapid sampling and control calculations. Integrated CTMU supports capacitive measurement, MCPWM peripherals provide complementary or independent motor-drive outputs, and PPS supports precise synchronization with external timing devices. The manufacturer product page identifies CTMU, MCPWM, PPS, advanced peripherals, and small-footprint options as defining features of this family.
The PIC24FJ16MC101-E/SO operates from a 3.3 V supply and is specified for an automotive temperature range extending from -40°C to +125°C. The -E/SO ordering combination identifies the extended automotive device in a 20-pin SOIC package. Its 20-pin footprint is suitable for compact motor controllers, two- and three-phase BLDC arrangements, fan controllers, pump controls, and compact power tools where a high-pin-count controller would add unnecessary board area.
Typical designs use the MCPWM outputs to drive inverter or half-bridge power stages, use CTMU for touch or position-related sensing, and employ the 16-bit timer and interrupt architecture for deterministic loop timing. The 16 KB Flash limit requires careful code organization for complex protocols or graphical interfaces. A 1 KB SRAM allocation is suitable for motor-control state variables but generally calls for external memory in applications that retain large buffers.
For PCB implementation, follow the pin-description table in the Microchip data sheet when assigning the multiplexed digital, analog, communications, and motor-control functions. Keep decoupling capacitors close to the supply pins, provide adequate copper and return paths for switching-current loops, and confirm that every unused input is configured appropriately in firmware.
This page consolidates the manufacturer specifications, available package and ordering information, verified drop-in candidates, and practical guidance for firmware, layout, and motor-drive implementation. It helps engineers evaluate the PIC24FJ16MC101-E/SO without treating a similarly named family member as an automatic replacement.
کے لیے ڈراپ اِن متبادل PIC24FJ16MC101-E/SO — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FJ16MC101-E/SO (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, Package.
PIC24FJ16MC101-I/SO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ16MC101-E/SO زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 16-bit motor-control microcontroller |
| CPU Architecture | Modified Harvard architecture |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 16 KB Flash (5.5K words x 24 bits) |
| Data Memory | 1 KB SRAM |
| سپلائی وولٹیج | 3.3 V |
| آپریٹنگ درجہ حرارت | -40°C to +125°C |
| پیکیج | 20-pin SOIC |
| Package Width | 7.50 mm |
| Motor-Control Peripheral | MCPWM |
| Capacitive Touch Peripheral | CTMU |
| Peripheral Pin Select | PPS supported |
| ADC Resolution | 10-bit |
| Automotive Qualification | AEC-Q100 |
| Instruction Word Length | 24-bit |
| ماؤنٹنگ ٹائپ | Surface mount |
PIC24FJ16MC101-E/SO 7.50 mm پن کنفیگریشن گائیڈ
PIC24FJ16MC101-E/SO (7.50 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC24FJ16MC101-E/SO.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
PIC24FJ16MC101-E/SO کے لیے موزوں ہے 6 ایپلیکیشنs: Compact BLDC Motor Controller, Automotive Actuator Control, Fan and Pump Speed Control, Capacitive Touch Control Panel, Small Power Tool Controller, Precision Timing and Synchronization.
Compact BLDC Motor Controller
The PIC24FJ16MC101-E/SO fits compact brushless DC motor controllers because its 16 MIPS processing rate supports timely current sampling and control calculations, while the MCPWM peripherals simplify complementary or independent drive waveform generation. The 3.3 V supply and 20-pin SOIC footprint preserve board area in space-constrained appliances and power tools. Designers can use the 16 KB Flash for the main control loop and 1 KB SRAM for state variables, provided code and stack requirements remain within those limits. The -40°C to +125°C range and AEC-Q100 designation are useful when ambient and enclosure temperatures exceed conventional industrial limits. The external MOSFET gate driver, shunt or sensing network, and fault shutdown path remain separate system-design responsibilities.
تجویز کردہ
Automotive Actuator Control
The PIC24FJ16MC101-E/SO is suitable for compact automotive actuator modules where an extended -40°C to +125°C operating range and AEC-Q100 device identification are important. Its 16-bit CPU, 16 MIPS throughput, and motor-control peripherals support responsive closed-loop positioning, valve, pump, or latch control without requiring a larger automotive MCU. The 20-pin SOIC package leaves room for a power stage and protection circuitry on a small controller board. Firmware should include diagnostic handling, safe-state defaults, and fault responses because MCU qualification does not validate the complete automotive subsystem. Confirm the external power-transistor ratings, load transients, electromagnetic compatibility, and production traceability requirements for the finished vehicle platform.
تجویز کردہ
Fan and Pump Speed Control
The PIC24FJ16MC101-E/SO can control small brushless fans, circulation pumps, and appliance motors where variable speed, fault monitoring, and compact packaging are priorities. The MCPWM outputs provide the timing needed for electronic commutation, while the 32 MHz CPU and 16 MIPS throughput support speed estimation and closed-loop regulation. Its 1 KB SRAM is adequate for compact control state when the firmware avoids large history buffers, and the 16 KB Flash can host a focused control application. The 20-pin SOIC footprint also allows reuse of the same physical design across different temperature-grade order codes when qualification permits. Designers should add protections for stalled loads, reverse polarity, supply transients, and switch-node ringing according to the motor and power-stage characteristics.
تجویز کردہ
Capacitive Touch Control Panel
The PIC24FJ16MC101-E/SO is useful in small appliances and industrial controls that combine touch input with motor or actuator control. Its CTMU peripheral supports capacitive measurement, allowing the MCU to evaluate touch electrodes while retaining the same compact 20-pin SOIC package used for control functions. The 16-bit CPU and 16 MIPS throughput can service timing-sensitive measurement and motor-control tasks, while 1 KB SRAM limits how many simultaneous touch channels and filtered data sets can be buffered. CTMU performance depends on careful electrode layout, guarding, filtering, and calibration in firmware. Keep high-current switching paths away from sensitive sensor traces and validate noise immunity with the final power stage operating, because coupling can change measured capacitance and false-touch behavior.
تجویز کردہ
Small Power Tool Controller
The PIC24FJ16MC101-E/SO can serve as the digital controller in a compact power-tool or appliance drive system where high ambient temperatures and vibration are expected. The 32 MHz CPU provides enough performance for PWM generation, current feedback, and protection sequencing, while the MCPWM peripheral reduces the timing burden on the CPU. The -E/SO grade is identified for -40°C to +125°C operation and AEC-Q100 qualification, supporting designs exposed to thermal stress. Its 16 KB Flash and 1 KB SRAM are suitable for focused control firmware without a separate logic device. However, a robust implementation must include independent hardware shutdown, current limiting, thermal derating, and watchdog strategy. Firmware and layout should be tested together because high dv/dt switching can couple into analog and control signals.
تجویز کردہ
Precision Timing and Synchronization
The PIC24FJ16MC101-E/SO is appropriate for compact embedded modules that must coordinate motor timing with external clocks or precision peripherals. PPS allows the device to route selected timing events to an external device, while the 16-bit modified Harvard CPU supports efficient control and interrupt handling. The 32 MHz operating frequency provides a useful balance between processing capability, memory footprint, and power-conscious design in a 20-pin SOIC package. Synchronization accuracy depends on selecting the correct PPS source, configuring timer prescaling, and accounting for interrupt latency in firmware. Keep the reference signal path short and away from switch-node copper, use an appropriate ground reference, and validate timing across voltage and temperature because external oscillator characteristics and propagation delays contribute to the final system budget.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FJ16MC101-E/SO — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FJ16MC101-I/SO |
|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | 16-bit motor-control microcontroller | 16-bit motor-control microcontroller |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS |
| Flash Memory | 16 KB (5.5K words x 24 bits) | 16 KB |
| SRAM | 1 KB | 1 KB |
| Supply Voltage | 3.3 V | 3.3 V |
| Ordering Grade | -E/SO automotive grade | -I/SO industrial-temperature grade |
| Motor-Control Peripheral | MCPWM | MCPWM |
| Capacitive Touch Peripheral | CTMU | CTMU |
اہم امتیازی خصوصیات
- Automotive-grade ordering option (بمقابلہPIC24FJ16MC101-I/SO)
- Compact motor-control integration (بمقابلہPIC24FJ16MC101-I/SO)
- Direct package reuse for qualified designs (بمقابلہPIC24FJ16MC101-I/SO)
ڈیزائن نوٹس
Follow the Microchip package drawing and pin-description table when assigning the 20-pin SOIC footprint. Place the device-side supply bypass capacitor directly between the supply and ground pins, with a short ground return that does not pass through switching-current paths. Route MCPWM outputs toward the gate-driver or inverter section without sharing narrow copper with sensitive analog inputs. Confirm exposed-pad and thermal requirements from the package drawing before releasing the layout.
Separate the quiet MCU and sensing region from the high-current motor-drive stage. Keep CTMU electrode traces short, guarded where appropriate, and isolated from power-switching copper. Use a continuous ground reference, but avoid routing high-current return currents beneath the MCU or analog inputs. Validate the final arrangement with the power stage switching because dv/dt and common-source inductance can create measurement errors even when the schematic appears correct.
Do not assume that every PIC24FJ16MC101 ordering code is a drop-in substitute. The -E/SO and -I/SO versions share the 20-pin SOIC footprint, but their grade and temperature requirements differ. Also avoid treating the -E/P or -E/SS devices as replacements because those suffixes specify different packages. Confirm the exact pin assignment, voltage, temperature range, qualification, and programming configuration before substituting any ordering code.
The MCPWM signals should drive suitable external gate drivers or power switches rather than the motor current directly. Design the hardware shutdown path so a dangerous fault does not depend solely on firmware timing. Check supply transients, reverse-battery behavior, gate-driver voltage, and logic-level compatibility across temperature. The MCU's 3.3 V operating supply does not define the motor rail or inverter supply, which are separate from the low-voltage control domain.
تعمیل کی معلومات
The product listing identifies PIC24FJ16MC101-E/SO as automotive-grade AEC-Q100. Other environmental and material-compliance statuses are not stated.