PIC24FJ256DA106-I/MR - 256KB Flash 16-Bit MCU with Graphics & USB | Microchip
Référence : PIC24FJ256DA106-I/MR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.45 | $9,45 |
| 10 | $8.8 | $88,00 |
| 100 | $7.95 | $795,00 |
| 500 | $7.1 | $3 550,00 |
| 1 000 | $6.25 | $6 250,00 |
PIC24FJ256DA106-I/MR Présentation
A 16-bit microcontroller (MCU) is a single-chip computer that uses a 16-bit-wide data path, registers, and ALU, offering a balance between 8-bit simplicity and 32-bit performance. Within Microchip's taxonomy, the PIC24F sits above 8-bit PIC10/12/16 devices and below 32-bit PIC32 devices; it is a low-power, Flash-based family with strong peripheral integration. The PIC24FJ256DA106 belongs to the PIC24F-DA subfamily, which adds graphics-specific hardware for driving TFT LCDs up to 4.3" WQVGA (480 x 272) without an external graphics controller, and to the Power Management IC, peripherals and broader ecosystem.
Key features: integrated Graphics Controller with hardware acceleration and up to 480x272 WQVGA drive, integrated 3.3V LDO regulator, USB 2.0 full-speed OTG with on-chip transceiver, Charge Time Measurement Unit (CTMU) supporting up to 64 touch buttons, Parallel Master Port (PMP), Real-Time Clock and Calendar (RTCC), and 8-channel hardware DMA. The device operates from 2.0 V to 3.6 V with industrial -40C to +85C temperature range.
The PIC24FJ256DA106's architecture combines a 16-bit modified Harvard RISC core with a 24-bit instruction word, achieving deterministic interrupt latency. The Graphics Controller features a dedicated DMA-driven rendering pipeline and configurable display timing, eliminating the need for external display controllers and BOM cost. The integrated Charge Time Measurement Unit (CTMU) provides capacitive touch sensing, while the Parallel Master Port enables direct connection to external memory or graphics peripherals.
Typical applications include 4.3-inch WQVGA TFT LCD display modules with touch, USB-enabled embedded human-machine interfaces (HMIs), industrial control panels with graphical readout, point-of-sale (POS) terminals, medical instrumentation displays, and consumer appliance user interfaces. The device suits any product that benefits from integrated graphics acceleration, USB connectivity, and Microchip's extensive development ecosystem including MPLAB X IDE, MPLAB Harmony framework, and Explorer 16/32 development board support.
When designing with this MCU, allocate the VQFN-9x9 exposed pad (EP) to a continuous ground plane with multiple thermal vias to the inner ground layer for optimal thermal and electrical performance. The USB transceiver requires a precise 48 MHz clock that can be derived from the PLL with a low-jitter crystal reference; engineers should use an external ESD protection array on the USB DP/DM lines and a 2.5 kohm pull-up on D+ for full-speed signaling. Avoid routing high-speed traces near the analog AVdd rail.
This page synthesizes Microchip PIC24FJ256DA106-I/MR distributor pricing, 256 KB flash memory code density, and 16 MIPS throughput at 3.3 V ratings with drop-in VQFN-64 (9x9) alternatives and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC24FJ256DA106-I/MR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FJ256DA106-I/MR (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, Graphics Controller, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24FJ128DA106-I/MR
✅ Remplacement direct✓ En stock
$2.4 / unité
Voir la fiche technique →PIC24FJ256DA106-I/PT
✅ Remplacement direct✓ En stock
$5.46 / unité
Voir la fiche technique →PIC24FJ256DA106T-I/MR
✅ Remplacement direct✓ En stock
$6.05 / unité
Voir la fiche technique →PIC24FJ128GB606-I/MR
✅ Remplacement direct✓ En stock
$3.62 / unité
Voir la fiche technique →PIC24FJ256GA106-I/MR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24FJ256DA106-I/MR Valeurs maximales et caractéristiques électriques
| Core | PIC24F (16-bit modified Harvard RISC) |
| Architecture | 16-bit data, 24-bit instruction |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 256 KB (85.5K x 24) |
| Data RAM | 24 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| Number of I/O Pins | 52 (some sources state 23 remappable) |
| ADC | 10-bit, up to 16 channels, 1.1 Msps |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| Graphics Controller | Integrated, drives TFT up to 4.3" WQVGA (480x272) |
| Touch Sensing | CTMU - up to 64 buttons |
| Communication Interfaces | 2x UART, 2x SPI, 2x I2C, PMP, USB |
| DMA Channels | 8-channel hardware DMA |
| RTCC | Yes (Real-Time Clock and Calendar) |
| Boîtier | 64-VQFN (9x9 mm) with exposed pad |
| Température de fonctionnement | -40C to +85C (Industrial, I suffix) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC24FJ256DA106-I/MR
| Broche 1 | RA0 — GPIO/analog input |
| Broche 2 | RA1 — GPIO/analog input |
| Broche 3 | RA2 — GPIO/analog input |
| Broche 4 | RA3 — GPIO/analog input |
| Broche 5 | RA4 — GPIO |
| Broche 6 | RA5 — GPIO |
| Broche 7 | RA6 — GPIO/OSC1 |
| Broche 8 | RA7 — GPIO/OSC2 |
| Broche 9 | VSS — Ground |
| Broche 10 | VDD — Digital supply (2.0-3.6V) |
| Broche 11 | RB0 — GPIO/PPS |
| Broche 12 | RB1 — GPIO/PPS |
| Broche 13 | RB2 — GPIO/PPS |
| Broche 14 | RB3 — GPIO/PPS |
| Broche 15 | RB4 — GPIO/PPS |
| Broche 16 | RB5 — GPIO/PPS |
| Broche 17 | RB6 — GPIO/PPS |
| Broche 18 | RB7 — GPIO/PPS |
| Broche 19 | RB8 — GPIO/PPS |
| Broche 20 | RB9 — GPIO/PPS |
| Broche 21 | RB10 — GPIO/PPS |
| Broche 22 | RB11 — GPIO/PPS |
| Broche 23 | RB12 — GPIO/PPS |
| Broche 24 | RB13 — GPIO/PPS |
| Broche 25 | RB14 — GPIO/PPS |
| Broche 26 | RB15 — GPIO/PPS |
| Broche 27 | VSS — Ground |
| Broche 28 | VDD — Digital supply |
| Broche 29 | RC1 — GPIO/PPS |
| Broche 30 | RC2 — GPIO/PPS |
| Broche 31 | RC3 — GPIO/PPS |
| Broche 32 | RC4 — GPIO/PPS |
| Broche 33 | VUSB — USB 3.3V supply |
| Broche 34 | D- — USB D- data line |
| Broche 35 | D+ — USB D+ data line |
| Broche 36 | RC12 — GPIO/PPS |
| Broche 37 | RC13 — GPIO/PPS |
| Broche 38 | RC14 — GPIO/PPS |
| Broche 39 | RC15 — GPIO/PPS |
| Broche 40 | AVSS — Analog ground |
| Broche 41 | AVDD — Analog supply |
| Broche 42 | RD0 — GPIO/PMP |
| Broche 43 | RD1 — GPIO/PMP |
| Broche 44 | RD2 — GPIO/PMP |
| Broche 45 | RD3 — GPIO/PMP |
| Broche 46 | RD4 — GPIO/PMP |
| Broche 47 | RD5 — GPIO/PMP |
| Broche 48 | RD6 — GPIO/PMP |
| Broche 49 | RD7 — GPIO/PMP |
| Broche 50 | RE0 — GPIO/PMP |
| Broche 51 | RE1 — GPIO/PMP |
| Broche 52 | RE2 — GPIO/PMP |
| Broche 53 | RE3 — GPIO/PMP |
| Broche 54 | RE4 — GPIO/PMP |
| Broche 55 | RE5 — GPIO/PMP |
| Broche 56 | RE6 — GPIO/PMP |
| Broche 57 | RE7 — GPIO/PMP |
| Broche 58 | RF0 — GPIO/PMP |
| Broche 59 | RF1 — GPIO/PMP |
| Broche 60 | RF2 — GPIO/PMP |
| Broche 61 | RF3 — GPIO/PMP |
| Broche 62 | RF4 — GPIO/PMP |
| Broche 63 | RF5 — GPIO/PMP |
| Broche 64 | RF6 — GPIO/PMP |
Applications typiques
PIC24FJ256DA106-I/MR convient pour 7 applications: 4.3-inch WQVGA TFT LCD Display Module with Touch, USB-Enabled Embedded Human-Machine Interface (HMI), Industrial Control Panel with Graphical Readout, Point-of-Sale (POS) Terminal, Medical Instrumentation Display, Consumer Appliance User Interface, Automotive Infotainment Sub-Display.
4.3-inch WQVGA TFT LCD Display Module with Touch
The PIC24FJ256DA106-I/MR's integrated Graphics Controller directly drives 4.3-inch WQVGA TFT LCDs at 480x272 resolution with hardware-accelerated rendering, eliminating the need for an external display controller IC and reducing BOM cost in graphical HMI modules. Its 256 KB Flash accommodates UI asset tables, and the CTMU (Charge Time Measurement Unit) supports up to 64 capacitive touch buttons without an external touch controller. Typical circuits place 10 uF + 100 nF decoupling on VDD, route the TFT data bus through the Parallel Master Port (PMP), and connect the touch panel to ADC inputs via CTMU current sources.
Recommandé
USB-Enabled Embedded Human-Machine Interface (HMI)
The PIC24FJ256DA106-I/MR's integrated USB 2.0 Full-Speed OTG transceiver with on-chip pull-up and PHY enables direct connection to a host PC without an external USB interface IC, ideal for industrial HMI panels that require firmware updates or data logging via USB. Its 16 MIPS throughput at 32 MHz supports responsive UI updates, while the integrated RTCC provides accurate time-stamped events. Typical circuits include an external 2.5 kohm pull-up on D+ for full-speed detection, an ESD protection array (USBLC6-2SC6) on DP/DM lines, and a 48 MHz low-jitter crystal for USB clock accuracy.
Recommandé
Industrial Control Panel with Graphical Readout
The PIC24FJ256DA106-I/MR is well-suited for industrial control panels where a graphical readout simplifies operator interaction. Its industrial -40C to +85C temperature range (I suffix) and 2.0-3.6 V operating voltage allow deployment in factory floor environments with fluctuating power supplies. The 8-channel hardware DMA offloads graphical rendering from the CPU, freeing 16 MIPS of throughput for control loop execution. Typical circuits add a 2.5 kV isolation barrier between the MCU's ADC inputs and field wiring, plus a watchdog timer (WDT) and brown-out reset (BOR) for industrial robustness.
Recommandé
Point-of-Sale (POS) Terminal
The PIC24FJ256DA106-I/MR serves as a low-cost main controller in compact POS systems, with the Graphics Controller driving a small TFT receipt preview or signature capture display, USB OTG supporting external barcode scanners or receipt printers, and the 10-bit ADC reading operator keypad inputs. The 256 KB Flash stores graphical UI assets, payment flow logic, and USB device drivers, with the 24 KB SRAM accommodating transaction buffers. Typical circuits place the MCU on a 2-layer PCB with a continuous ground plane under the exposed pad for thermal dissipation.
Recommandé
Medical Instrumentation Display
The PIC24FJ256DA106-I/MR's ultra-low-power design (less than 100 nA standby current with RTCC running) and integrated display capability make it suitable for battery-powered medical instruments such as portable patient monitors or diagnostic readers. Its 32 MHz MIPS throughput processes sensor data while the Graphics Controller renders waveforms and numeric readings on a small TFT display. The CTMU enables sealed capacitive touch interfaces that resist disinfectants. Typical circuits add a precision voltage reference (e.g., MCP1525) for ADC accuracy and a separate analog ground island for noise isolation.
Recommandé
Consumer Appliance User Interface
The PIC24FJ256DA106-I/MR provides the graphical user interface for high-end consumer appliances such as smart ovens, washing machines, or coffee makers, where a small TFT display with touch replaces traditional LED/button panels. Its integrated USB enables firmware updates from a service tool or factory programming, while the Graphics Controller handles animated icons and progress indicators without CPU overhead. The 24 KB SRAM supports bilingual UI strings and animation buffers. Typical circuits interface the MCU to mains-isolated power supplies with reinforced insulation and use optocouplers for any back-powering signals.
Recommandé
Automotive Infotainment Sub-Display
The PIC24FJ256DA106-I/MR drives secondary automotive displays such as HVAC climate control, rear-seat entertainment, or instrument cluster sub-displays. Its industrial temperature grade (I suffix, -40C to +85C) covers most cabin applications, while USB OTG supports media playback from USB sticks. The Graphics Controller renders menus at 480x272 WQVGA, and the CTMU provides touch-button input. Note that AEC-Q100 Grade 0 automotive qualification requires the -E (extended) suffix variant. Typical circuits include CAN bus interface via external MCP2515, reverse-battery diode, and load-dump protection.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FJ256DA106-I/MR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FJ128DA106-I/MR | PIC24FJ256DA106-I/PT | PIC24FJ256DA106T-I/MR | PIC24FJ128GB606-I/MR | PIC24FJ256GA106-I/MR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9) | 64-VQFN (9x9) - same | 64-TQFP (10x10) - different | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same |
| Flash Memory | 256 KB | 128 KB | 256 KB | 256 KB | 128 KB | 256 KB |
| RAM | 24 KB | 24 KB | 24 KB | 24 KB | 24 KB | 24 KB |
| Graphics Controller | Yes (integrated) | Yes | Yes | Yes | No | No |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Operating Voltage | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V |
| Operating Temperature | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
Principaux différenciateurs
- Integrated hardware Graphics Controller vs GA series (vs PIC24FJ256GA106-I/MR)
- 256 KB Flash for graphical UI assets (vs PIC24FJ128DA106-I/MR)
- CTMU touch sensing without external controller (vs PIC24FJ128GB606-I/MR)
- Full-speed USB OTG with on-chip transceiver (vs PIC24FJ256GA106-I/MR (general MCU))
Notes de conception
Estimated: For the 64-VQFN (9x9) package, the exposed pad (EP) MUST be soldered to a continuous ground plane with at least 9 thermal vias (0.3 mm diameter, 1.0 mm pitch) connecting to inner ground layers. Without proper EP soldering, thermal resistance rises dramatically, leading to junction temperature excursions under sustained USB or Graphics Controller load. Place the EP land pattern as a single 4.6x4.6 mm square in the center of the package footprint.
Estimated: The internal 3.3V LDO requires a minimum 4.7 uF low-ESR ceramic capacitor on VCAP/VDDCORE (pin 11 in some variants), per Microchip datasheet DS39969D section 31. Bypass each VDD/VSS pair with a 100 nF X7R 0402 ceramic placed within 2 mm of the pin. Avoid sharing VDD traces with high-current digital outputs to prevent digital switching noise from coupling into analog AVdd.
Estimated: The USB D+/D- differential pair requires 90 ohm differential impedance controlled routing, maximum length 50 mm, with a USBLC6-2SC6 ESD protection array placed within 5 mm of the USB connector. Series ferrite beads (600 ohm at 100 MHz) are recommended for EMI suppression on VUSB. Do not route other signals under or parallel to the USB differential pair.
The PIC24FJ256DA106-I/MR PPS (Peripheral Pin Select) feature allows flexible assignment of digital peripherals to GPIO pins, but assignments must be unlocked via IOLOCK before PPS configuration in firmware. Forgetting to unlock PPS causes peripherals to fail silently. Also note that the Graphics Controller requires DMA-driven frame buffer updates - enabling the Graphics Controller without proper DMA setup causes bus contention and graphical artifacts.
For TFT LCD driving via the Parallel Master Port (PMP), place the data bus, address bus, and control signals (RD, WR, RS, CS) as a matched-length group with 50 mil spacing to minimize skew. Route digital TFT signals on a layer adjacent to the ground plane; do not cross the analog AVdd island. Keep CTMU touch-sensing traces short and balanced (matched length to within 5 mm) to ensure uniform touch sensitivity across the panel.
Informations de conformité
RoHS and lead-free compliant per Microchip product page. Not AEC-Q100 qualified - I suffix indicates industrial temperature grade -40C to +85C only. For automotive applications requiring AEC-Q100 Grade 0, the -E (extended) suffix variant is needed.
