PIC24FJ32GA004-E/ML - 16-Bit 32KB Flash MCU | Microchip
Référence : PIC24FJ32GA004-E/ML ✓ ActifPIC24FJ32GA004-E/ML Présentation
A PIC24-family microcontroller is a 16-bit RISC embedded controller used to combine program execution, memory, communications peripherals, timers, analog interfaces, and general-purpose I/O in one device. In the product hierarchy, a microcontroller belongs to embedded processors and semiconductor integrated circuits. The PIC24 architecture offers higher arithmetic processing capacity than an 8-bit controller while retaining a compact package and a focused embedded feature set.
The principal device characteristics include 32 KB of flash memory, 8 KB of SRAM, a 32 MHz operating frequency, and up to 16 MIPS of instruction throughput. The 35 available I/O pins support digital interfaces and discrete inputs or outputs, while the 44-QFN construction minimizes board area. Its extended-temperature rating differentiates the E/ML ordering code from the industrial-temperature I/ML variant without changing the core memory configuration.
The PIC24FJ32GA004 belongs to the PIC24FJ64GA004 family and is positioned for applications requiring a 16-bit embedded controller with an economical peripheral set. Its architecture includes a hardware multiplier and divider according to the family datasheet, along with an instruction set optimized for C development. This combination makes it suitable for control loops, sensor acquisition, communication bridging, and compact industrial modules where a higher-performance controller is needed but a large application processor would be excessive.
Typical uses include industrial sensing equipment, environmental monitoring, building controls, instrument interfaces, motor and actuator control, and connected embedded products. The 35 I/O pins are especially useful for systems combining digital inputs, display or communications connections, status indicators, and external interface signals. Tube packaging supports automated manufacturing processes that are configured for bulk component handling.
PCB design should account for the exposed thermal pad and place input, ground, and decoupling connections according to the manufacturer's package and pin-description guidance. Decoupling capacitance should be placed close to the device supply pins, while the exposed pad should use a thermal-via and copper strategy consistent with the board stack-up. Firmware and peripheral configuration should be checked against the manufacturer datasheet because unused pins and alternate functions depend on the selected package.
This product page combines device specifications, sourcing guidance, verified package information, and practical replacement considerations. It also distinguishes true pin-compatible options from ordering-code or packaging differences so engineers can make a controlled choice for new designs and redesigns.
Alternatives de remplacement direct pour PIC24FJ32GA004-E/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
PIC24FJ32GA004-I/ML
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PIC24FJ32GA004-E/ML Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit Flash Microcontroller |
| CPU Instruction Width | 16 bit |
| Maximum CPU Frequency | 32 MHz |
| Maximum Performance | 16 MIPS |
| Program Memory | 32 KB Flash |
| Program Memory Organization | 11K x 24 words |
| Data Memory | 8192 bytes RAM |
| I/O Pin Count | 35 pins |
| Tension d'alimentation | 2.5 V or 3.3 V |
| Boîtier | 44-QFN, 8 mm x 8 mm |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40°C to +125°C |
| Hardware Multiplier | 17 x 17 bit |
| Hardware Divider | 32-bit x 16-bit |
| Programming | In-Circuit Programming |
| Delivery Format | Tube |
| Statut RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Guide de configuration des broches du PIC24FJ32GA004-E/ML 44-qfn, 8 mm x 8 mm
Configuration des broches du PIC24FJ32GA004-E/ML (boîtier 44-qfn, 8 mm x 8 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC24FJ32GA004-E/ML.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC24FJ32GA004-E/ML convient pour 6 applications: Industrial Sensor Acquisition, Building Control and Automation, Environmental Monitoring, Instrument and Test Equipment, Actuator and Motor Control, Connected Embedded Modules.
Industrial Sensor Acquisition
The PIC24FJ32GA004-E/ML fits industrial sensor-acquisition equipment that must process multiple digital inputs while operating in a wide temperature range. Its 16-bit CPU reaches 32 MHz and up to 16 MIPS, providing more arithmetic capacity than an 8-bit controller for scaling, filtering, and condition-monitoring routines. The 35 I/O pins can connect sensors, alarm inputs, status indicators, and interface signals, while the -40°C to +125°C rating supports equipment installed in thermally variable industrial locations. The 8 KB RAM and 32 KB flash provide working space and firmware capacity for acquisition logic, diagnostics, and communication routines. Designers should use the family datasheet for exact peripheral multiplexing and place decoupling close to the supply pins.
Recommandé
Building Control and Automation
The PIC24FJ32GA004-E/ML is appropriate for building-control modules that combine sensors, digital outputs, and communications in a compact enclosure. Its 35 I/O pins reduce the need for external I/O expansion when the controller manages occupancy inputs, relays, indicators, and bus-connected devices. The 16-bit PIC24 architecture executes control logic efficiently at up to 32 MHz, and the 32 KB flash supports firmware for scheduling, diagnostics, and protocol handling. Extended operation from -40°C to +125°C makes the device suitable for equipment near HVAC equipment, electrical panels, or other locations with substantial internal temperature variation. The 44-QFN package also supports compact board layouts when exposed-pad thermal management is handled carefully.
Recommandé
Environmental Monitoring
The PIC24FJ32GA004-E/ML can serve as the control hub in an environmental monitoring system that combines digital sensing, local logging, and communications. Its 32 MHz 16-bit processor provides enough throughput for signal conditioning, sampling coordination, and data formatting, while 8 KB of RAM supports working buffers and 32 KB of flash accommodates embedded firmware. The 35 I/O pins allow connection of sensor-enable lines, digital outputs, status LEDs, and communications interfaces without requiring a larger package. Its -40°C to +125°C operating range is useful in outdoor monitoring electronics exposed to seasonal extremes. Firmware designers should verify the active peripheral pins against the package-specific pin table before finalizing the board layout.
Recommandé
Instrument and Test Equipment
The PIC24FJ32GA004-E/ML is suitable for compact instrumentation that requires deterministic control alongside multiple external connections. Its 16-bit RISC core supports up to 16 MIPS, allowing the MCU to coordinate measurements, apply calibration values, manage front-panel signals, and format results. Thirty-five I/O pins provide capacity for switches, indicators, triggers, and communication links, while the 44-QFN footprint preserves a compact board outline. The device's extended -40°C to +125°C rating supports industrial test equipment deployed across varying internal temperatures. Design teams should separate analog measurement circuitry from digital switching and follow the manufacturer's grounding and decoupling guidance to avoid coupling noise into precision front ends.
Recommandé
Actuator and Motor Control
The PIC24FJ32GA004-E/ML can coordinate low- to moderate-complexity actuator and motor-control systems that combine timing, feedback, and safety logic. Its 16-bit CPU and hardware multiplier assist with proportional control calculations, while the 32 MHz clock and up to 16 MIPS throughput provide responsiveness for closed-loop routines. The 35 I/O pins can connect position sensors, limit switches, gate-driver enables, and diagnostic inputs. The 32 KB flash and 8 KB RAM are adequate for control sequences and state management in compact systems. Because the MCU does not directly specify motor-drive voltage or power-stage ratings, designers must add suitable driver circuitry and use the family datasheet to select timer outputs and peripheral functions for each 44-QFN pin.
Recommandé
Connected Embedded Modules
The PIC24FJ32GA004-E/ML fits compact embedded modules that need local control, protocol handling, and configurable digital I/O. Its 32 KB flash and 8 KB RAM can hold networking or serial-communication firmware alongside application logic, while the 35 I/O pins leave ample connections for sensors, indicators, and external control signals. The 16-bit PIC24 instruction set is optimized for C development, which can shorten integration work for module-level protocols. Its 44-QFN package helps minimize board area, and the -40°C to +125°C rating supports deployments in industrial gateways and remote monitoring equipment. The module designer should account for antenna or communications circuitry placement, power-supply isolation, and the exposed thermal pad when laying out the board.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FJ32GA004-E/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FJ32GA004-I/ML |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8 mm x 8 mm) | 44-QFN (8 mm x 8 mm) |
| CPU Architecture | 16-bit PIC24 RISC | 16-bit PIC24 RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Maximum Performance | 16 MIPS | 16 MIPS |
| Flash Memory | 32 KB | 32 KB |
| RAM | 8192 bytes | 8192 bytes |
| I/O Pin Count | 35 pins | 35 pins |
| Operating Temperature | -40°C to +125°C | -40°C to +85°C |
| Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
Principaux différenciateurs
- Extended-temperature operation (vs PIC24FJ32GA004-I/ML)
- Core performance is unchanged (vs PIC24FJ32GA004-I/ML)
- PCB compatibility without package conversion (vs PIC24FJ32GA004-I/ML)
Notes de conception
Treat the 44-QFN exposed pad as a thermal and electrical connection rather than an unused package feature. Connect it to the ground plane using the manufacturer-recommended via arrangement and evaluate the final thermal path on the actual PCB stack-up. The target's -40°C to +125°C rating describes the allowable ambient operating range; it does not guarantee that every enclosure reaches 125°C without thermal analysis.
Place the required bypass capacitors close to the corresponding supply and ground pins, and keep high-current return paths away from sensitive analog inputs. The 44-QFN footprint has fine-pitch leads and an exposed pad, so assembly capability, solder-mask design, and via-in-pad processing should be reviewed before release. Use the package drawing in the manufacturer datasheet as the controlling land-pattern reference.
Do not substitute PIC24FJ32GA004-I/ML without checking the maximum product temperature. Its 85°C upper rating is 40°C below the E/ML target's 125°C limit, even though both devices use the same 44-QFN footprint and retain the same core memory and performance configuration. Also confirm the ML tube packaging and production quantity requirements before ordering.
Assign each alternate-function signal from the package-specific pin table rather than assuming that a pin used on another family member has the same function. The 44-QFN device provides 35 I/O pins in addition to power, ground, programming, and other package connections. Keep programming and debug access reachable for manufacturing, and verify unused-pin treatment in the final schematic and board review.
Informations de conformité
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. Confirm product-line and shipment-specific compliance documents with the manufacturer.