PIC24FV16KM102-E/SP - 16-Bit 32MHz 16KB MCU | Microchip
Référence : PIC24FV16KM102-E/SP ✓ ActifPIC24FV16KM102-E/SP Présentation
A PIC24 microcontroller belongs to the 16-bit RISC microcontroller family and combines a general-purpose CPU, integrated analog peripherals, and configurable digital logic in one device. The PIC24FV family is positioned for cost-sensitive, low-power designs and supports operation from 2.0 V to 5.5 V, allowing the same controller to serve both 3 V and 5 V systems. Its configurable logic cells can supplement conventional GPIO functions when timing, combinatorial, or simple control logic is required.
Key features include 16 KB of Flash program memory, 1 KB of SRAM, 512 bytes of EEPROM, a 12-bit ADC, comparators, and flexible Capture/Compare/PWM modules. The 32 MHz clock rate provides useful performance for protocol handling, digital control, data acquisition, and supervisory tasks. Through-hole SPDIP construction also simplifies prototyping, automated assembly, and serviceable industrial controller designs.
The device integrates several peripherals intended to reduce external component count. A 12-bit ADC supports analog measurement, while comparators can monitor voltage thresholds without requiring a separate comparator IC. Multiple CCP channels can generate PWM waveforms, capture input timing, or compare events, making the MCU suitable for motor, lighting, and industrial monitoring functions. Configurable Logic Cell resources provide additional implementation flexibility beyond standard GPIO assignments.
Typical applications include building controls, HVAC equipment, battery-powered instruments, compact sensor nodes, industrial control panels, and general-purpose embedded products. Its 23 available I/O pins can accommodate digital inputs, output drivers, serial interfaces, and analog sensing. The 2.0 V to 5.5 V operating range supports both energy-harvesting systems and legacy 5 V industrial equipment.
When designing the PCB, reserve the supply decoupling capacitor close to VDD and VSS pins, route analog inputs away from switching nodes, and verify the oscillator and reset-network recommendations in the manufacturer datasheet. Confirm that every required MCU function is supported by the 28-pin variant before committing the layout, because lower-pin-count PIC24 devices can omit peripheral channels or dedicated I/O pins.
This page combines the device specifications, package details, application guidance, and same-package upgrade options to support faster component selection. It also highlights practical peripheral, routing, and design considerations that are not obvious from a distributor title alone.
Alternatives de remplacement direct pour PIC24FV16KM102-E/SP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FV16KM102-E/SP (même facteur de forme et même empreinte) — différant par Mounting Type, Package, ADC Resolution, Capture/Compare/PWM Modules, EEPROM.
PIC24FV16KM102-I/SP
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC24F16KM102-I/SP
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC24FV16KM204-I/SP
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC24FV16KM102-E/SP Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit RISC Flash Microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Program Memory Size | 16 KB (5.5K x 24 words) |
| RAM Size | 1 KB |
| EEPROM Size | 512 bytes |
| Number of I/O Pins | 23 |
| ADC Resolution | 12-bit |
| ADC Architecture | 12-bit successive-approximation ADC |
| Comparators | Integrated comparators |
| Capture/Compare/PWM Modules | MCCP/SCCP modules |
| Configurable Logic Cells | Integrated configurable logic cells |
| Tension d'alimentation de fonctionnement | 2.0 V to 5.5 V |
| Supported Supply Configurations | 3 V and 5 V applications |
| Low-Power Technology | nanoWatt eXtreme low-power operation |
| Boîtier | 28-pin SPDIP, 0.300 inch (7.62 mm) pitch |
| Type de montage | Through-hole |
| Core Processor | 16-bit PIC core |
| Program Memory Type | Flash |
| Temperature Grade | Extended temperature grade |
Guide de configuration des broches du PIC24FV16KM102-E/SP 28-pin spdip, 0.300 inch (7.62 mm) pitch
Configuration des broches du PIC24FV16KM102-E/SP (boîtier 28-pin spdip, 0.300 inch (7.62 mm) pitch). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC24FV16KM102-E/SP.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC24FV16KM102-E/SP convient pour 6 applications: Industrial Control and Sensor Hubs, Battery-Powered Environmental Monitoring, HVAC and Building Control, LED Lighting and Dimming Control, Motor Control and Small Actuators, Compact Measurement and Instrumentation.
Industrial Control and Sensor Hubs
The PIC24FV16KM102-E/SP suits compact industrial controllers because its 16-bit core runs at up to 32 MHz and provides 23 I/O pins alongside a 12-bit ADC. Those resources allow a single device to read analog sensors, supervise discrete inputs, and drive relay or transistor outputs without requiring a separate analog interface IC. Its 2.0 V to 5.5 V range also supports both modern low-voltage sensing nodes and established 5 V industrial control boards. A practical design uses the ADC channels for temperature, pressure, or level sensing, the comparators for threshold alarms, and CCP outputs for motor or heater control. Firmware can use the configurable logic cells for simple timing or combinatorial functions, reducing external logic. Confirm the 28-pin peripheral-channel mapping before assigning every ADC, CCP, and communication function.
Recommandé
Battery-Powered Environmental Monitoring
The PIC24FV16KM102-E/SP works well in battery-powered environmental monitors where a 32 MHz 16-bit processor must combine control functions with low-power operation. Its supply range begins at 2.0 V, and the PIC24FV family's nanoWatt eXtreme low-power architecture supports designs that spend much of their time in sleep or low-activity states. A typical node uses the 12-bit ADC for temperature and humidity sensors, GPIO for a status indicator, and serial or configurable logic resources for a compact external sensor interface. The 1 KB of SRAM is sufficient for small sampling buffers and protocol state, while 512 bytes of EEPROM can retain calibration values or counters. Select the deepest appropriate sleep mode in firmware, disable unused peripherals, and consult the manufacturer timing tables for wake-up latency and current consumption.
Recommandé
HVAC and Building Control
The PIC24FV16KM102-E/SP can serve as the central controller in an HVAC or building-automation module because it combines 32 MHz processing, 12-bit analog measurement, comparators, and multiple I/O functions in a 28-pin package. Analog inputs can monitor temperature, humidity, and pressure, while digital outputs operate relays, solenoid valves, fan stages, or status indicators. The comparators provide fast threshold detection, and CCP peripherals can capture sensor timing or generate PWM drive signals for low-speed actuators. The 16 KB program area provides room for a structured control application, while 1 KB of RAM accommodates scheduling state and short data buffers. For reliable building equipment, isolate the MCU ground and analog routing from relay and switching-node currents, then validate the board against the application's electrical-immunity requirements.
Recommandé
LED Lighting and Dimming Control
The PIC24FV16KM102-E/SP is appropriate for LED drivers and dimming modules that need accurate timing alongside low-level monitoring. Its CCP peripherals can produce PWM waveforms for constant-current LED regulation, and the configurable logic cells can assist with switching or fault-detection logic. At 32 MHz, the 16-bit core has ample timing margin for debouncing controls, updating display indicators, and supervising temperature sensors used for thermal regulation. The 12-bit ADC can monitor a current-sense or temperature channel, while 23 I/O pins support buttons, fault signals, and external driver control lines. Keep the PWM and analog-sensing ground return close to the device, and isolate LED-switching edges from the ADC input with appropriate layout and filtering. Confirm the exact CCP channel and timer assignments for the 28-pin package.
Recommandé
Motor Control and Small Actuators
The PIC24FV16KM102-E/SP can control small motors, pumps, and position actuators when the design needs more timing resolution and peripheral integration than an 8-bit MCU. Its 32 MHz clock supports faster PWM generation, input capture for speed or position feedback, and responsive control-loop execution. CCP channels provide timer resources, the comparators can detect sensor thresholds, and the 12-bit ADC supports current, position, or temperature feedback. The 16 KB Flash capacity accommodates motor-startup logic, fault handling, and communication routines, while the 1 KB SRAM is appropriate for compact control loops. The MCU is not itself a high-power gate driver, so external transistor or gate-driver stages remain necessary. Validate timing margins, maximum input frequency, and thermal performance with the selected actuator and power stage.
Recommandé
Compact Measurement and Instrumentation
The PIC24FV16KM102-E/SP is well suited to compact measurement instruments that combine analog sensing, digital configuration, and a modest user interface. The 12-bit ADC acquires sensor signals, comparators provide hardware threshold warnings, and 23 I/O pins can drive switches, indicators, and communication lines. Its 16-bit core improves arithmetic handling compared with an 8-bit MCU when scaling readings or applying digital filters, and the 32 MHz clock provides headroom for protocol handling. The 28-pin SPDIP package is particularly useful for prototype instruments and educational platforms where through-hole assembly simplifies rework. Place analog inputs away from digital switching paths, provide a stable reference arrangement, and follow the datasheet recommendations for ADC acquisition and grounding. Firmware should also define overload and calibration behavior for the complete measurement chain.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FV16KM102-E/SP — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FV16KM102-I/SP | PIC24F16KM102-I/SP | PIC24FV16KM204-I/SP |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP - same | 28-pin SPDIP - same | 28-pin SPDIP - same |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Program Flash | 16 KB | 16 KB | 16 KB | 32 KB |
| Temperature Grade | Extended (E) | Industrial (I) | Industrial (I) | Industrial (I) |
Principaux différenciateurs
- Provides the same memory and clock figures as the industrial-grade same-package option (vs PIC24FV16KM102-I/SP)
- Combines a 16-bit 32 MHz core with integrated analog and timing resources in 28 pins (vs PIC24F16KM102-I/SP)
- Retains a compact 16 KB program-memory configuration while offering a same-footprint memory upgrade path (vs PIC24FV16KM204-I/SP)
Notes de conception
Connect the supply and ground pins according to the manufacturer pin table and place the required bypass capacitor immediately across the device's local supply pins. Keep the return path short and use a quiet ground plane for the analog and digital sections. Since the device supports 2.0 V to 5.5 V operation, verify regulator startup, voltage tolerances, and brownout behavior at the lowest rail voltage rather than assuming a 5 V design will also be safe at 2.0 V.
Route analog inputs away from PWM outputs, clock signals, and switching-node edges, and keep the ADC return path continuous with the device ground. Comparator inputs and ADC channels can share sensitive analog routing, but each still requires its own source impedance to remain within the datasheet acquisition limits. Use the family reference schematic as the basis for decoupling and analog grounding, then adjust only after checking the actual sensor output impedance and sampling rate.
Do not assume that every peripheral channel available on larger PIC24 packages exists on the 28-pin SPDIP. MCP/CCP functions, comparator inputs, timer outputs, and serial mappings can move between pins or reduce in number depending on package selection. Before schematic capture, create a peripheral-to-pin allocation table from the 28-pin datasheet and confirm that the chosen operating voltage, oscillator configuration, programming pins, and all required I/O can coexist without conflicts.
The -E/SP and -I/SP ordering suffixes are not interchangeable when the environmental qualification plan is defined. Both provide a 28-pin SPDIP footprint, but the grade identifies different temperature classifications and procurement conditions. Treat a grade change as a controlled substitution: compare operating-temperature limits, electrical characteristics, qualification documentation, and lifecycle status before releasing the change to production.
Informations de conformité
The extended-temperature ordering suffix is not an AEC-Q100 automotive qualification statement. Compliance declarations should be confirmed against the current manufacturer product documentation or declarations for the exact orderable part.