PIC24FV16KM202-E/SO - 16-Bit 32MHz MCU | Microchip
Référence : PIC24FV16KM202-E/SO ✓ ActifPIC24FV16KM202-E/SO Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The PIC24 CPU uses a 16-bit RISC architecture and combines conventional microcontroller integration with dedicated analog and timing blocks. This makes the device part of the embedded-control hierarchy: microcontroller, embedded processor, programmable logic controller, and semiconductor.
Three headline features define this variant. Its 32 MHz operating frequency supports efficient control-loop execution, while 16 KB of flash provides room for application code and configuration data. The 2 KB RAM accommodates working variables and stack operations. Integrated peripherals reduce external component count by providing ADC conversion, DAC output, op-amp functions, configurable logic cells, and Capture/Compare/PWM resources.
The analog-rich architecture is particularly useful for mixed-signal products. A 12-bit ADC supports sensor acquisition, an 8-bit DAC supports analog output, and the integrated amplifiers can assist signal-conditioning paths. The family also supports flexible Capture/Compare/PWM modules, which can generate timing signals, measure pulse widths, or drive control outputs without relying entirely on software polling.
PIC24FV16KM202-E/SO targets low-power embedded systems operating from 2.5 V, 3.3 V, or 5 V. Typical applications include industrial sensor controllers, compact data-acquisition modules, low-power monitoring equipment, motor and valve control, and embedded analog-control products. The 28-pin SOIC package supports conventional surface-mount assembly while exposing the analog and digital resources required for mixed-signal designs.
PCB design should preserve short analog paths between sensor inputs, ADC channels, and grounding. Place decoupling capacitors close to the supply pins, route high-current and switching signals away from sensitive analog inputs, and verify the external crystal or oscillator network against the manufacturer’s timing guidance. Firmware configuration must also account for the selected clock source, ADC acquisition sequence, and peripheral pin assignments.
This product page consolidates the manufacturer’s device features with practical selection criteria, application guidance, package details, and a structured comparison of verified same-family alternatives. It helps engineers determine whether the 28-pin PIC24FV16KM202 architecture satisfies flash, RAM, analog, timing, voltage, and board-space requirements before schematic capture.
Alternatives de remplacement direct pour PIC24FV16KM202-E/SO — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FV16KM202-E/SO (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, DAC, Operating Temperature.
PIC24FV16KM202-I/SO
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PIC24FV16KM202T-I/SO
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24F16KM202-I/SO
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PIC24FV16KM202-E/SO Valeurs maximales et caractéristiques électriques
| CPU Architecture | 16-bit PIC RISC |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 16 KB flash (5.5K x 24 bits) |
| RAM | 2 KB |
| EEPROM | 512 bytes |
| ADC Resolution | 12 bits |
| ADC Features | 8-bit and 10-bit operation modes; 12-bit conversion capability |
| DAC Resolution | 8 bits |
| Integrated Analog Resources | Operational amplifiers and configurable logic cells |
| Timing and Capture Peripherals | Capture/Compare/PWM modules; MCP/SCCP capability |
| Operating Voltage Options | 2.5 V, 3.3 V, and 5 V |
| Power Technology | PIC XLP eXtreme Low Power technology |
| Boîtier | 28-pin SOIC, 7.50 mm body width |
| Type de montage | Surface mount |
| Packing Media | Tube |
Guide de configuration des broches du PIC24FV16KM202-E/SO 28-pin soic, 7.50 mm body width
Configuration des broches du PIC24FV16KM202-E/SO (boîtier 28-pin soic, 7.50 mm body width). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC24FV16KM202-E/SO.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC24FV16KM202-E/SO convient pour 6 applications: Industrial Sensor Controllers, Low-Power Monitoring Equipment, Mixed-Signal Control Platforms, Motor and Valve Control, Portable Measurement Instruments, LED Lighting and Display Control.
Industrial Sensor Controllers
The PIC24FV16KM202-E/SO fits compact industrial sensor controllers because its 12-bit ADC can acquire analog sensor signals while the 8-bit DAC provides a controlled analog output. At up to 32 MHz, the 16-bit PIC core can execute filtering, calibration, condition monitoring, and communications routines without requiring a separate processor. Its 2 KB RAM and 16 KB flash support focused control firmware, while the integrated op amps can assist conditioning stages. Operate at 2.5 V, 3.3 V, or 5 V according to the design, and verify industrial temperature limits against the ordering table.
Recommandé
Low-Power Monitoring Equipment
The PIC24FV16KM202-E/SO is appropriate for battery-powered or intermittently operated monitoring equipment because its PIC XLP architecture is designed around eXtreme Low Power consumption. A sensor node can use the 12-bit ADC for periodic readings, the 16-bit core for threshold logic, and the 2 KB RAM for local working data before returning to a sleep state. The 8-bit DAC can generate a low-level reference or test output where required. Its 28-pin SOIC format also permits a compact, inspectable surface-mount layout for instruments and environmental monitors.
Recommandé
Mixed-Signal Control Platforms
The PIC24FV16KM202-E/SO is well suited to mixed-signal control platforms because it combines a 12-bit ADC, an 8-bit DAC, operational amplifiers, configurable logic cells, and timer blocks in one device. The same silicon can acquire a sensor, implement gain or filtering functions, drive a low-bandwidth actuator, and generate precise timing signals. Its 32 MHz processing rate supports responsive control loops, while 16 KB of flash and 2 KB of RAM fit compact embedded programs. Analog routing and pin multiplexing should be reviewed carefully in the manufacturer pin-description tables.
Recommandé
Motor and Valve Control
The PIC24FV16KM202-E/SO can serve as the controller in compact motor-position, valve, or actuator systems because its Capture/Compare/PWM modules support timing, pulse measurement, and waveform generation. The 32 MHz PIC24 core can decode input timing, calculate control decisions, and update actuator commands, while the ADC can monitor current or position-related analog feedback. The 8-bit DAC is useful for command or test signals. Choose motor circuitry outside the MCU for drive current and protection, and validate switching noise, timing margins, and thermal performance in the final power stage.
Recommandé
Portable Measurement Instruments
The PIC24FV16KM202-E/SO supports portable measurement instruments that need both acquisition and control in a small 28-pin footprint. Its 12-bit ADC measures external analog inputs, the 8-bit DAC creates calibration or stimulus signals, and the integrated op amps assist front-end conditioning. The 16-bit RISC core provides deterministic computation for readings, range conversion, and instrument state management. Running at 3.3 V can simplify battery-oriented power planning, while the 2 KB RAM and 16 KB flash are adequate for compact firmware, subject to calibration-table and communications overhead.
Recommandé
LED Lighting and Display Control
The PIC24FV16KM202-E/SO can coordinate LED lighting, status indicators, or compact display-related control tasks by combining timers, PWM-capable capture/compare resources, and general-purpose I/O. The 32 MHz processor can update multiple timing patterns while managing button input, sensor thresholds, and fault indicators. Its 8-bit DAC may generate an analog reference where the display or driver requires one, and the 12-bit ADC can monitor supply or thermal conditions. Confirm each alternate-function mapping and pin direction in the manufacturer datasheet before assigning timers to LED channels.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FV16KM202-E/SO — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FV16KM202-I/SO | PIC24FV16KM202T-I/SO | PIC24F16KM202-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| CPU Architecture | 16-bit PIC RISC | 16-bit PIC RISC | 16-bit PIC RISC | 16-bit PIC RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Program Memory | 16 KB flash | 16 KB flash | 16 KB flash | 16 KB flash |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 bytes | 512 bytes | 512 bytes | 512 bytes |
| ADC | 12-bit | 12-bit | 12-bit | 12-bit |
| DAC | 8-bit | 8-bit | 8-bit | 8-bit |
| Integrated Operational Amplifiers | Yes | Yes | Yes | Yes |
| Operating Voltage Options | 2.5 V, 3.3 V, and 5 V | 2.5 V, 3.3 V, and 5 V | 2.5 V, 3.3 V, and 5 V | 2.5 V, 3.3 V, and 5 V |
| Ordering-Code Difference | -E/SO grade and SOIC package | -I/SO grade and SOIC package | T-I/SO temperature-grade ordering code | F-series -I/SO ordering code |
Principaux différenciateurs
- Mixed-signal integration reduces external converter and amplifier requirements (vs PIC24FV16KM202-I/SO)
- Exact ordering-code fit for designs specified around the E/SO configuration (vs PIC24FV16KM202T-I/SO)
- Full 28-pin SOIC feature set without a larger package (vs PIC24F16KM202-I/SO)
Notes de conception
Place the required supply decoupling capacitors immediately adjacent to the appropriate VDD and VSS pins, and provide a direct, low-impedance ground return for analog and digital sections. Keep analog inputs away from PWM outputs, switching-regulator traces, and high-current motor paths. The integrated 12-bit ADC and 8-bit DAC can still be affected by ground bounce and shared supply impedance, so use a quiet analog return path and verify the reference arrangement against the manufacturer’s hardware guidance.
Treat every analog and alternate-function connection as a pin-multiplexing decision rather than as a dedicated signal. Before assigning an ADC input, DAC output, op-amp terminal, timer, programming pin, or digital I/O, check the pin-description and alternate-function tables in the manufacturer datasheet. Conflicting peripheral assignments can disable communications or programming functions even when the PCB footprint is correct. Produce a firmware-to-pin matrix and review it alongside the schematic before layout release.
Do not assume that an ordering-code substitution preserves every electrical or qualification condition. The -E/SO, -I/SO, and T-I/SO codes identify different ordering grades or temperature options, while the F-series and FV-series codes also require careful comparison of device identification and supported features. For each proposed substitute, verify the active ordering table, package drawing, operating-temperature limits, supply range, pin functions, programming method, and qualification status before treating it as a production drop-in replacement.
Plan the 2.5 V, 3.3 V, or 5 V rail around the device’s selected operating mode and external analog loads. Although the microcontroller integrates the ADC, DAC, and op amps, their reference, output, and output-driver loads can vary with configuration. Use the manufacturer’s electrical-characteristics tables to set supply tolerances, analog-reference limits, output loading, and bypass requirements. Confirm that the power regulator has adequate startup, transient, and ground-return capability for the complete mixed-signal board.
Informations de conformité
Compliance attributes are not stated on the manufacturer product page or in the cited product listings. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before procurement.