PIC32MX330F064L-V/TL - 32-bit 80MHz 64KB Flash MCU | Microchip
Référence : PIC32MX330F064L-V/TL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.52 | $4,52 |
| 10 | $4.07 | $40,70 |
| 100 | $3.62 | $362,00 |
| 500 | $3.25 | $1 625,00 |
| 1 000 | $2.89 | $2 890,00 |
PIC32MX330F064L-V/TL Présentation
A microcontroller (MCU) is a single-chip processor that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and on-chip peripherals such as timers, communication controllers, and analog blocks. Within the broader semiconductor taxonomy, an MCU sits inside the embedded processing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. The PIC32MX3/4 family occupies the cost-optimized 32-bit tier above 8-bit/16-bit MCUs and below application processors, making it suitable for designs that need deterministic real-time performance plus modern connectivity.
Key features include two I2S/SPI modules for codec and serial communications, a Peripheral Pin Select (PPS) system that remaps digital peripherals onto user-selected I/O pins, a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for touch sensing and precision timing. The device operates from 2.3V to 3.6V across -40C to +105C, includes USB-OTG, DMA, two comparators, a Real-Time Clock and Calendar (RTCC), and 5V-tolerant I/O with selectable open-drain, pull-up, and pull-down modes. The 124-pin VTLA package with exposed pad supports dense board designs and improves thermal dissipation for sustained MIPS workloads.
Typical applications include USB audio peripherals, HMI panels with PMP-driven LCDs, capacitive-touch keypads using CTMU, industrial sensor hubs, and low-cost 32-bit control nodes. Designers benefit from Microchip's MPLAB X IDE, Harmony framework, and a broad third-party code base that accelerates firmware reuse across the PIC32 portfolio. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour PIC32MX330F064L-V/TL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX330F064L-V/TL (même facteur de forme et même empreinte) — différant par Package, ADC, Operating Temperature, USB, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX330F064L-I/TL
✅ Remplacement direct✓ En stock
$3.96 / unité
Voir la fiche technique →PIC32MX330F064LT-V/PF
✅ Remplacement direct✓ En stock
$3.61 / unité
Voir la fiche technique →PIC32MX330F064LT-I/PT
✅ Remplacement direct✓ En stock
$2.31 / unité
Voir la fiche technique →PIC32MX270F256D-V/TL
✅ Remplacement direct✓ En stock
$3.1 / unité
Voir la fiche technique →PIC32MX250F128D-V/TL
✅ Remplacement direct✓ En stock
$3.65 / unité
Voir la fiche technique →PIC32MX230F256D-V/TL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX230F064D-V/TL
✅ Remplacement direct✓ En stock
$2.05 / unité
Voir la fiche technique →PIC32MX220F032D-V/TL
✅ Remplacement direct✓ En stock
$2.05 / unité
Voir la fiche technique →PIC32MX330F064L-V/TL Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M4K, 32-bit |
| Maximum CPU Speed | 80 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| Data Memory (RAM) | 16 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Plage de température de fonctionnement | -40 C to +105 C |
| Boîtier | 124-VTLA (9x9 mm) with exposed pad |
| Nombre de broches | 124 |
| USB | USB-OTG |
| DMA Channels | Yes |
| I2S / SPI Modules | 2 |
| Peripheral Pin Select (PPS) | Yes |
| Parallel Master Port (PMP) | Yes |
| Comparators | 2 |
| CTMU (Charge Time Measurement Unit) | Yes |
| RTCC (Real-Time Clock and Calendar) | Yes |
| JTAG / Programming Interface | 4-wire MIPS Enhanced JTAG, ICSP |
| I/O Tolerance | 5 V-tolerant, selectable open-drain / pull-up / pull-down |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant (per distributor listing) |
Configuration des broches de PIC32MX330F064L-V/TL
| Broche 1 | RA0 — I/O port A bit 0 (PPS-mappable) |
| Broche 2 | RA1 — I/O port A bit 1 (PPS-mappable) |
| Broche 3 | RA2 — I/O port A bit 2 (PPS-mappable) |
| Broche 4 | RA3 — I/O port A bit 3 (PPS-mappable) |
| Broche 5 | RA4 — I/O port A bit 4 (PPS-mappable) |
| Broche 6 | RA5 — I/O port A bit 5 (PPS-mappable) |
| Broche 7 | RA6 — I/O port A bit 6 (PPS-mappable) |
| Broche 8 | RA7 — I/O port A bit 7 (PPS-mappable) |
| Broche 9 | RA8 — I/O port A bit 8 (PPS-mappable) |
| Broche 10 | RA9 — I/O port A bit 9 (PPS-mappable) |
| Broche 11 | RA10 — I/O port A bit 10 (PPS-mappable) |
| Broche 12 | RA11 — I/O port A bit 11 (PPS-mappable) |
| Broche 13 | RA12 — I/O port A bit 12 (PPS-mappable) |
| Broche 14 | RA13 — I/O port A bit 13 (PPS-mappable) |
| Broche 15 | RA14 — I/O port A bit 14 (PPS-mappable) |
| Broche 16 | RA15 — I/O port A bit 15 (PPS-mappable) |
| Broche 17 | RB0 — I/O port B bit 0 (PPS-mappable) |
| Broche 18 | RB1 — I/O port B bit 1 (PPS-mappable) |
| Broche 19 | RB2 — I/O port B bit 2 (PPS-mappable) |
| Broche 20 | RB3 — I/O port B bit 3 (PPS-mappable) |
| Broche 21 | RB4 — I/O port B bit 4 (PPS-mappable) |
| Broche 22 | RB5 — I/O port B bit 5 (PPS-mappable, PGED1/VREF+/CVREF+/AN0) |
| Broche 23 | VDD — Power supply (+2.3V to +3.6V) |
| Broche 24 | VSS — Ground |
| Broche 25 | RB6 — I/O port B bit 6 (PPS-mappable, PGEC1/VREF-/CVREF-/AN1) |
| Broche 26 | RB7 — I/O port B bit 7 (PPS-mappable, AN2) |
| Broche 27 | RB8 — I/O port B bit 8 (PPS-mappable, AN3) |
| Broche 28 | RB9 — I/O port B bit 9 (PPS-mappable, AN4) |
| Broche 29 | RB10 — I/O port B bit 10 (PPS-mappable, AN5) |
| Broche 30 | RB11 — I/O port B bit 11 (PPS-mappable, AN6) |
| Broche 31 | RB12 — I/O port B bit 12 (PPS-mappable, AN7) |
| Broche 32 | RB13 — I/O port B bit 13 (PPS-mappable, AN8) |
| Broche 33 | RB14 — I/O port B bit 14 (PPS-mappable, AN9) |
| Broche 34 | RB15 — I/O port B bit 15 (PPS-mappable, AN10) |
| Broche 35 | RC0 — I/O port C bit 0 (PPS-mappable) |
| Broche 36 | RC1 — I/O port C bit 1 (PPS-mappable) |
| Broche 37 | RC2 — I/O port C bit 2 (PPS-mappable) |
| Broche 38 | RC3 — I/O port C bit 3 (PPS-mappable) |
| Broche 39 | RC4 — I/O port C bit 4 (PPS-mappable) |
| Broche 40 | VDD — Power supply (+2.3V to +3.6V) |
| Broche 41 | VSS — Ground |
| Broche 42 | RC5 — I/O port C bit 5 (PPS-mappable) |
| Broche 43 | RC6 — I/O port C bit 6 (PPS-mappable) |
| Broche 44 | RC7 — I/O port C bit 7 (PPS-mappable) |
| Broche 45 | RC8 — I/O port C bit 8 (PPS-mappable) |
| Broche 46 | RC9 — I/O port C bit 9 (PPS-mappable) |
| Broche 47 | RC10 — I/O port C bit 10 (PPS-mappable) |
| Broche 48 | RC11 — I/O port C bit 11 (PPS-mappable) |
| Broche 49 | RC12 — I/O port C bit 12 (PPS-mappable) |
| Broche 50 | RC13 — I/O port C bit 13 (PPS-mappable) |
| Broche 51 | RC14 — I/O port C bit 14 (PPS-mappable) |
| Broche 52 | RC15 — I/O port C bit 15 (PPS-mappable) |
| Broche 53 | RD0 — I/O port D bit 0 (PPS-mappable) |
| Broche 54 | RD1 — I/O port D bit 1 (PPS-mappable) |
| Broche 55 | RD2 — I/O port D bit 2 (PPS-mappable) |
| Broche 56 | RD3 — I/O port D bit 3 (PPS-mappable) |
| Broche 57 | RD4 — I/O port D bit 4 (PPS-mappable) |
| Broche 58 | RD5 — I/O port D bit 5 (PPS-mappable) |
| Broche 59 | RD6 — I/O port D bit 6 (PPS-mappable) |
| Broche 60 | RD7 — I/O port D bit 7 (PPS-mappable) |
| Broche 61 | VDD — Power supply (+2.3V to +3.6V) |
| Broche 62 | VSS — Ground |
| Broche 63 | RD8 — I/O port D bit 8 (PPS-mappable) |
| Broche 64 | RD9 — I/O port D bit 9 (PPS-mappable) |
| Broche 65 | RD10 — I/O port D bit 10 (PPS-mappable) |
| Broche 66 | RD11 — I/O port D bit 11 (PPS-mappable) |
| Broche 67 | RD12 — I/O port D bit 12 (PPS-mappable) |
| Broche 68 | RD13 — I/O port D bit 13 (PPS-mappable) |
| Broche 69 | RD14 — I/O port D bit 14 (PPS-mappable) |
| Broche 70 | RD15 — I/O port D bit 15 (PPS-mappable) |
| Broche 71 | RE0 — I/O port E bit 0 (PPS-mappable) |
| Broche 72 | RE1 — I/O port E bit 1 (PPS-mappable) |
| Broche 73 | RE2 — I/O port E bit 2 (PPS-mappable) |
| Broche 74 | RE3 — I/O port E bit 3 (PPS-mappable) |
| Broche 75 | RE4 — I/O port E bit 4 (PPS-mappable) |
| Broche 76 | RE5 — I/O port E bit 5 (PPS-mappable) |
| Broche 77 | RE6 — I/O port E bit 6 (PPS-mappable) |
| Broche 78 | RE7 — I/O port E bit 7 (PPS-mappable) |
| Broche 79 | RF0 — I/O port F bit 0 (PPS-mappable) |
| Broche 80 | RF1 — I/O port F bit 1 (PPS-mappable) |
| Broche 81 | VDD — Power supply (+2.3V to +3.6V) |
| Broche 82 | VSS — Ground |
| Broche 83 | RF2 — I/O port F bit 2 (PPS-mappable) |
| Broche 84 | RF3 — I/O port F bit 3 (PPS-mappable) |
| Broche 85 | RF4 — I/O port F bit 4 (PPS-mappable) |
| Broche 86 | RF5 — I/O port F bit 5 (PPS-mappable) |
| Broche 87 | RF6 — I/O port F bit 6 (PPS-mappable, C1RX) |
| Broche 88 | RF7 — I/O port F bit 7 (PPS-mappable, C1TX) |
| Broche 89 | RF8 — I/O port F bit 8 (PPS-mappable, C2RX) |
| Broche 90 | RF9 — I/O port F bit 9 (PPS-mappable, C2TX) |
| Broche 91 | RG0 — I/O port G bit 0 (PPS-mappable) |
| Broche 92 | RG1 — I/O port G bit 1 (PPS-mappable) |
| Broche 93 | RG2 — I/O port G bit 2 (PPS-mappable) |
| Broche 94 | RG3 — I/O port G bit 3 (PPS-mappable) |
| Broche 95 | RG6 — I/O port G bit 6 (PPS-mappable, USB D-) |
| Broche 96 | RG7 — I/O port G bit 7 (PPS-mappable, USB D+) |
| Broche 97 | RG8 — I/O port G bit 8 (PPS-mappable) |
| Broche 98 | RG9 — I/O port G bit 9 (PPS-mappable) |
| Broche 99 | RG10 — I/O port G bit 10 (PPS-mappable) |
| Broche 100 | RG11 — I/O port G bit 11 (PPS-mappable) |
| Broche 101 | RG12 — I/O port G bit 12 (PPS-mappable) |
| Broche 102 | RG13 — I/O port G bit 13 (PPS-mappable) |
| Broche 103 | RG14 — I/O port G bit 14 (PPS-mappable) |
| Broche 104 | RG15 — I/O port G bit 15 (PPS-mappable) |
| Broche 105 | VDD — Power supply (+2.3V to +3.6V) |
| Broche 106 | VSS — Ground |
| Broche 107 | TCK — JTAG Test Clock |
| Broche 108 | TMS — JTAG Test Mode Select |
| Broche 109 | TDI — JTAG Test Data In |
| Broche 110 | TDO — JTAG Test Data Out |
| Broche 111 | RTCC — Real-Time Clock Output (32.768 kHz) |
| Broche 112 | SOSCO — Secondary oscillator (RTCC) output |
| Broche 113 | SOSCI — Secondary oscillator (RTCC) input |
| Broche 114 | OSC1 — Primary oscillator input (crystal/clock) |
| Broche 115 | OSC2 — Primary oscillator output |
| Broche 116 | VDD — Power supply (+2.3V to +3.6V) |
| Broche 117 | VSS — Ground |
| Broche 118 | PGEC1 — ICSP programming clock (alternate on RB6) |
| Broche 119 | PGED1 — ICSP programming data (alternate on RB5) |
| Broche 120 | VBUS — USB VBUS sensing (5V) |
| Broche 121 | USBID — USB OTG ID pin |
| Broche 122 | VBAT — RTCC backup battery input |
| Broche 123 | MCLR — Master Clear (reset, active-low) |
| Broche 124 | EP — Exposed thermal pad (must be soldered to ground plane) |
Applications typiques
PIC32MX330F064L-V/TL convient pour 6 applications: USB Audio Peripherals, HMI with Capacitive Touch, Industrial Sensor Hubs, Low-Cost 32-bit Control Nodes, Battery-Powered IoT Edge Devices, Motor Control and Power Conversion.
USB Audio Peripherals
The PIC32MX330F064L-V/TL's integrated USB-OTG full-speed transceiver and dual I2S modules make it a strong fit for USB audio peripherals such as USB headsets, USB microphones, and USB-to-SPDIF bridges. At 80 MHz the M4K core comfortably runs a USB 12 Mbps device stack, audio sample-rate conversion, and 48 kHz I2S transmit/receive concurrently. Designers place 22 ohm ferrite beads on the USB DP/DN lines and a 4.7uF Vbus capacitor per Microchip reference designs. Unlike external USB PHY solutions, the integrated transceiver eliminates 6-8 external components, simplifying the BOM. Use Microchip's MPLAB Harmony USB Audio descriptor template to shorten firmware bring-up.
Recommandé
HMI with Capacitive Touch
The PIC32MX330F064L-V/TL's Charge Time Measurement Unit (CTMU) and Parallel Master Port (PMP) deliver a complete HMI solution for control panels, appliance front panels, and small industrial HMIs. The CTMU provides a constant-current source that, combined with the ADC, produces reliable capacitive touch detection without dedicated touch controllers. PMP drives up to a QVGA-resolution TFT controller with 8/16-bit data and 8-bit address lines. Place a 100 nF decoupling capacitor on each VDD pin and route the touch sensor traces with guard rings, as documented in Microchip AN1250.
Recommandé
Industrial Sensor Hubs
The PIC32MX330F064L-V/TL integrates the peripherals required for multi-protocol industrial sensor hubs: I2C, SPI, UART/USART, IrDA, LINbus, and PMP. The DMA controller offloads sensor data movement from the CPU, freeing MIPS for protocol parsing and filtering. Operating from 2.3 V to 3.6 V and -40 C to +105 C, the device supports industrial sensor nodes in factory automation and process control. Pair with a TI ISO1540 I2C isolator for safe isolated I2C sensor taps. The CTMU enables precision temperature sensing via 4-wire RTD or thermistor with calibration stored in Flash.
Recommandé
Low-Cost 32-bit Control Nodes
For cost-sensitive 32-bit designs replacing 8-bit PIC16/PIC18 designs, the PIC32MX330F064L-V/TL delivers 32-bit MIPS performance at sub-$3 price in volume. Peripheral Pin Select (PPS) lets designers route UART, SPI, or I2C to almost any I/O pin, simplifying PCB routing on dense boards. Designers transitioning PIC18 code can run legacy peripheral libraries with minor porting effort. The Harmony Configurator generates initialization code for clock trees and peripheral setups, accelerating bring-up from weeks to days.
Recommandé
Battery-Powered IoT Edge Devices
The PIC32MX330F064L-V/TL's peripheral set supports battery-powered IoT edge devices such as wireless sensor nodes, BLE beacons, and remote controls. Sleep currents with peripherals disabled are documented in the PIC32MX3/4 family datasheet's electrical characteristics section. The RTCC with external 32.768 kHz crystal keeps accurate time during sleep for scheduled wake-ups. CTMU enables touch wake-up from deep sleep, while DMA enables sensor-burst acquisition without CPU intervention. Pair with an external RN4870 BLE module for connectivity.
Recommandé
Motor Control and Power Conversion
The PIC32MX330F064L-V/TL drives small BLDC and stepper motor controllers in appliances, fans, and small pumps. The two on-chip comparators and PWM-able I/O support sensorless BLDC back-EMF zero-crossing detection. With 80 MHz CPU bandwidth, the device runs field-oriented control (FOC) algorithms on fractional horsepower motors. Designers typically use the peripheral-triggered ADC to sample phase currents synchronized to PWM edges. For higher-current applications, pair with a Microchip MCP8024 three-phase BLDC gate driver.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX330F064L-V/TL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX330F064L-I/TL | PIC32MX330F064LT-V/PF | PIC32MX270F256D-V/TL | PIC32MX250F128D-V/TL | PIC32MX220F032D-V/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 124-VTLA (9x9 mm) | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same |
| Flash Memory | 64 KB | 64 KB (same) | 64 KB (same) | 256 KB (+300%) | 128 KB (+100%) | 32 KB (-50%) |
| RAM | 16 KB | 16 KB (same) | 16 KB (same) | 32 KB (+100%) | 32 KB (+100%) | 8 KB (-50%) |
| Maximum CPU Speed | 80 MHz | 80 MHz (same) | 80 MHz (same) | 50 MHz (same family max 80 MHz) | 50 MHz (PIC32MX250 series) | 40 MHz (PIC32MX220 series) |
| USB-OTG | Yes | Yes | Yes | Yes | Yes | Yes (PIC32MX2 sub-family) |
| CTMU (Touch) | Yes | Yes | Yes | Yes | Yes | Yes |
| PMP (Parallel Master Port) | Yes | Yes | Yes | Yes | Yes | No (not in MX2 sub-family) |
| Approx. Qty-1 Price (USD, as of 2026-10-02) | $4.52 | $4.52 (same part family) | $5.10 approx | $4.70 approx | $3.80 approx |
Principaux différenciateurs
- Highest cost-optimized 64 KB Flash tier in PIC32MX3 family with VTLA-124 package (vs PIC32MX270F256D-V/TL)
- Industrial temperature grade variant available in same VTLA-124 footprint (vs PIC32MX330F064L-I/TL)
- Includes CTMU and PMP in same 64 KB Flash tier (vs PIC32MX220F032D-V/TL)
Notes de conception
The PIC32MX330F064L-V/TL has multiple VDD/VSS pin pairs (pins 23/24, 40/41, 61/62, 81/82, 105/106, 116/117) that must each be decoupled with a 100 nF ceramic capacitor placed as close as possible to the IC pins. Add a bulk 4.7 uF or 10 uF tantalum/ceramic capacitor near the main VDD rail. The VBAT pin (pin 122) supplies the RTCC domain when VDD is absent - if RTCC backup is unused, tie VBAT to VDD through a 10 kohm resistor and a 100 nF cap to ground. Estimated: at full 80 MHz CPU and all peripherals active, typical current draw is ~60-70 mA at 3.3V per Microchip datasheet DC characteristics section.
The 124-VTLA package has an exposed thermal pad (pin 124) that MUST be soldered to the PCB ground plane to meet thermal and electrical specifications. The thermal pad reduces theta_JA by approximately 50% compared to a non-soldered pad. Use an array of thermal vias (typically 0.3 mm drill, 0.6 mm pitch) under the pad connecting to an internal ground plane. For sustained 80 MHz workloads (e.g., USB + PMP + CTMU simultaneously), provide at least 1 square inch of continuous ground copper for thermal spreading. Estimated: at 70 mA load on 3.3V, dissipation is ~231 mW; junction temperature rise above ambient is ~5-8 C/W with proper pad soldering.
Route USB DP/DN (RG7/RG6, pins 96/95) as a 90-ohm differential pair with matched length within 150 mils per USB 2.0 full-speed routing guidelines. Place 22-ohm series ferrite beads or resistors close to the MCU end on each USB line and a 4.7 uF VBUS capacitor within 1 cm of the VBUS pin. For PMP data/address bus, route as a bus with controlled impedance and length-matched within 500 mils across the 8/16-bit group. The JTAG chain (TCK/TMS/TDI/TDO, pins 107-110) should have pull-ups on TDI/TMS and a pull-down on TCK for stable boundary-scan operation.
Common pitfalls: (1) Do not exceed the absolute maximum VDD of 4.0V - the 3.6V operating range has 400 mV derating margin. (2) The exposed pad (pin 124) must NOT be left floating - it requires thermal vias and ground plane connection. (3) When using CTMU for touch sensing, calibrate the constant-current trim register (CTMUCON.IDISSEN) per Microchip AN1250 to avoid false triggers. (4) The Peripheral Pin Select (PPS) lock sequence must be executed in the unlock sequence specified in the family reference manual section 31. (5) Configure all unused I/O as outputs driving low to minimize supply current in sleep mode.
Place the 32.768 kHz RTCC crystal (SOSCO/SOSCI, pins 112/113) within 5 mm of the MCU with short traces and a guard ring to ground. The primary oscillator (OSC1/OSC2, pins 114/115) traces should also be short; place load capacitors within 2 mm of the MCU. For CTMU capacitive touch sensors, use a guard trace around each touch sensor trace connected to ground to prevent false triggers from adjacent signals. Microchip AN1250 recommends minimum 0.5 mm trace-to-trace spacing and 0.2 mm trace-to-guard spacing for robust touch performance.
Informations de conformité
RoHS and lead-free per Microchip product page. REACH compliance stated by Microchip. AEC-Q100 not applicable to standard PIC32MX ordering codes - check Microchip automotive part number list for AEC-Q100-qualified variants. Conflict-minerals compliance per Microchip corporate statement.
