PIC32MX450F128LT-I/PT - 32-bit 80MHz 128KB Flash MCU | Microchip
Référence : PIC32MX450F128LT-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.1 | $6,10 |
| 10 | $5.45 | $54,50 |
| 100 | $4.82 | $482,00 |
| 500 | $4.2 | $2 100,00 |
| 1 000 | $3.65 | $3 650,00 |
PIC32MX450F128LT-I/PT Présentation
A microcontroller (MCU) is a single-chip computer that combines a CPU core, program and data memory, and configurable I/O peripherals. The PIC32MX family uses the MIPS32 M4K core, a 32-bit RISC architecture from Imagination Technologies that Microchip licenses - making PIC32MX a 32-bit performance step above the 8-bit PIC16/PIC18 and 16-bit PIC24 families, while sharing Microchip's MPLAB X IDE and Harmony framework ecosystem. Within the power management and embedded control hierarchy, PIC32MX MCUs sit between Cortex-M0/M0+ microcontrollers and Cortex-M3/M4 parts in both performance and cost.
Key features include 80 MHz core clock (up to 100 MHz in some family variants), 128 KB single-cycle Flash with live update support, 32 KB SRAM, 2 SPI/I2S ports, 2 I2C ports, 2 UART ports, a USB 2.0 full-speed device/host/OTG controller, 5 16-bit timers/counters, and a 28-channel 10-bit 1 Msps ADC. The wide 2.3V to 3.6V supply range simplifies single-rail designs from 3.3V lithium or USB-fed power trees.
Architecturally, the PIC32MX450 uses a 5-stage MIPS pipeline with hardware multiply/divide, single-cycle Flash read through a 128-bit wide prefetch buffer, and a dedicated DMA controller for peripheral-to-memory transfers without CPU intervention. The 80 MHz part variant is a power-optimized speed grade of the 100 MHz PIC32MX450 family, ideal for cost-sensitive applications that do not need maximum throughput.
Typical applications include USB peripherals (HID, CDC, mass storage), IoT edge nodes with TCP/IP stacks, industrial sensor hubs, consumer appliances with capacitive touch via the Peripheral Pin Select (PPS) feature, and 32-bit upgrade paths for legacy PIC24 or PIC32MX1/2 designs. The 100-pin TQFP package offers 78 usable I/O pins plus USB transceiver pins, sufficing for human-machine interface (HMI) panels and small graphics.
When designing with this device, leave a 1 MOhm pull-up on the TMS pin for reliable 4-wire JTAG operation, and follow Microchip's Section 2.0 "Guidelines for Getting Started with 32-bit MCUs" - especially the 10 uF bulk + 0.1 uF decoupling arrangement within 6 mm of each VDD/VSS pin pair to keep the ADC noise floor low. The PT suffix designates the 100-pin TQFP package.
This page synthesizes distributor pricing, drop-in PIC32MX alternatives, and practical design notes not found in a single datasheet chapter.
Alternatives de remplacement direct pour PIC32MX450F128LT-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX450F128LT-I/PT (même facteur de forme et même empreinte) — différant par ADC, Package, Mounting Type, Operating Temperature, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX450F128HT-I/PT
✅ Remplacement direct✓ En stock
$3.65 / unité
Voir la fiche technique →PIC32MX440F256H-80I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX430F064HT-I/PT
✅ Remplacement direct✓ En stock
$3.21 / unité
Voir la fiche technique →PIC32MX450F128HT-V/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX370F512LT-I/PT
✅ Remplacement direct✓ En stock
$5.75 / unité
Voir la fiche technique →PIC32MX450F128LT-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Core Count | Single-core |
| Maximum Core Frequency | 80 MHz |
| Instruction Set Width | 32-bit |
| Flash Program Memory | 128 KB (128K x 8) |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| ADC | 10-bit, 28 channels, 1 Msps |
| Analog Comparators | 2 |
| SPI / I2S | 2 |
| I2C | 2 |
| UART | 2 |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| Timers | 5 x 16-bit |
| I/O Pins | 78 |
| Boîtier | 100-pin TQFP (12x12 mm), 0.40 mm pitch |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40 C to +85 C (Industrial) |
| DMA | Yes (4-channel) |
| Peripheral Pin Select (PPS) | Yes |
| Debug Interface | 4-wire JTAG / 2-wire ICSP |
| Statut RoHS | Compliant |
Guide de configuration des broches du PIC32MX450F128LT-I/PT 100-pin tqfp (12x12 mm), 0.40 mm pitch
Configuration des broches du PIC32MX450F128LT-I/PT (boîtier 100-pin tqfp (12x12 mm), 0.40 mm pitch). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC32MX450F128LT-I/PT.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC32MX450F128LT-I/PT convient pour 6 applications: USB HID / CDC Peripherals, Industrial Sensor Hubs, Consumer Appliance HMI, IoT Edge Nodes, Motor Control and BLDC Drivers, 32-bit Migration from PIC24 / PIC32MX1.
USB HID / CDC Peripherals
The PIC32MX450F128LT-I/PT integrates a USB 2.0 full-speed Device/Host/OTG controller with on-chip transceiver and pull-up resistor generation, eliminating the need for an external FTDI bridge or USB serializer. With 128 KB Flash, the MCU can host the Microchip USB stack plus HID, CDC, and generic class drivers, and the 80 MHz MIPS32 M4K core provides enough throughput for full-speed 12 Mbps transfers. The 78 I/O pins plus PPS (Peripheral Pin Select) allow flexible USB D+/D- placement on any pin, simplifying PCB routing in custom HID keyboards, barcode scanners, and industrial data loggers.
Recommandé
Industrial Sensor Hubs
The PIC32MX450F128LT-I/PT is well suited to industrial multi-sensor aggregation nodes because it integrates a 28-channel 10-bit ADC with 1 Msps throughput, two SPI/I2S interfaces for digital MEMS sensors, two I2C ports for environmental sensors, and two UART channels for legacy RS-485 Modbus links. The 2.3-3.6 V supply tolerates 3.3 V regulated industrial rails. With DMA on peripheral-to-memory transfers, the 80 MHz core can sample multiple sensors without CPU intervention, freeing MIPS for filter algorithms and Modbus response generation.
Recommandé
Consumer Appliance HMI
With 78 I/O pins, PPS remapping, and 128 KB Flash for graphics libraries, the PIC32MX450F128LT-I/PT drives monochrome TFT and OLED HMI panels in appliances. The Peripheral Pin Select feature routes SPI, I2C, and UART peripherals to any of the 78 I/O pins, simplifying PCB layout for capacitive touch overlays, encoder inputs, and LED matrix drivers. The MIPS32 M4K core at 80 MHz renders simple menus and 1-bit-per-pixel graphics faster than 8-bit PIC16 or PIC18 parts. Code reuse from existing PIC32MX1/2 designs shortens development cycles.
Recommandé
IoT Edge Nodes
The PIC32MX450F128LT-I/PT is used as an IoT edge controller with TCP/IP over Wi-Fi (via external module) or Ethernet MAC-less serial-to-cloud bridges. With 128 KB Flash, Microchip's TCP/IP Stack (Net) and MQTT client libraries fit, while the 80 MHz MIPS core handles TLS handshakes and JSON parsing. The 2.3-3.6 V supply is friendly to battery or solar edge nodes. Sleep current down to microamp range (specific Iq not in verified snippets) supports battery-only deployments with periodic wake-up for sensor reading and cloud upload.
Recommandé
Motor Control and BLDC Drivers
With 5 16-bit timers and PWM outputs across the PIC32MX3/4 peripheral set, the PIC32MX450F128LT-I/PT can drive BLDC, stepper, or brushed DC motors in small-format appliances. The 80 MHz core performs FOC algorithms in real time with cycle-accurate PWM generation. The 28-channel 10-bit ADC samples current sense amplifiers and back-EMF signals synchronously with PWM, and the DMA engine reduces CPU load. Integrated comparators trigger fault detection within 30 ns, protecting power stages from overcurrent events.
Recommandé
32-bit Migration from PIC24 / PIC32MX1
Engineers migrating from 16-bit PIC24 or 32-bit PIC32MX1/2 designs can step up to the PIC32MX450F128LT-I/PT without leaving the 100-pin TQFP footprint. Code compiled in MPLAB X with the XC32 toolchain targets PIC32MX450 with minimal changes from PIC32MX1/2 sources. The PIC32MX450 retains the same Harmony 3 framework, PLIB peripheral libraries, and MCC configuration flow, preserving firmware investment. The 80 MHz variant is a cost-effective speed grade for designs that do not need the full 100 MHz of the MX450 family.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX450F128LT-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX450F128HT-I/PT | PIC32MX440F256H-80I/PT | PIC32MX430F064HT-I/PT | PIC32MX450F128HT-V/PT | PIC32MX370F512LT-I/PT |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PT) | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Maximum Core Frequency | 80 MHz | 100 MHz | 80 MHz | 80 MHz | 100 MHz | 80 MHz |
| Flash Memory | 128 KB | 128 KB | 256 KB | 64 KB | 128 KB | 512 KB |
| USB 2.0 FS | Yes (OTG) | Yes (OTG) | Yes (device) | Yes (device) | Yes (OTG) | No |
| Supply Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +105 C | -40 C to +85 C |
| 1-Piece Price (USD, as of 2026-10-03) | $6.10 | $6.40 | $6.85 | $5.20 | $7.10 | $7.40 |
Principaux différenciateurs
- USB 2.0 Full-Speed OTG with on-chip transceiver (vs PIC32MX370F512LT-I/PT)
- Higher core clock headroom available at same pinout (vs PIC32MX440F256H-80I/PT)
- Larger Flash vs lower-cost siblings in same TQFP-100 footprint (vs PIC32MX430F064HT-I/PT)
Notes de conception
Per Microchip's PIC32MX3XX/4XX family datasheet Section 2.0 'Guidelines for Getting Started with 32-bit MCUs', place one 10 uF bulk capacitor and one 0.1 uF ceramic decoupling capacitor within 6 mm of every VDD/VSS pin pair. Place the 0.1 uF caps closest to the pins. Use a low-ESR ceramic (X7R or X5R) for the bulk to handle transient load steps when USB, ADC, and digital I/O switch simultaneously. A separate analog supply rail (AVDD) with its own ferrite bead and decoupling reduces ADC noise by 5-10 LSB in 10-bit conversions.
Route the 80 MHz system clock trace (EC or POSC output) over a continuous ground plane and keep it under 25 mm. The USB D+/D- traces require 90 ohm differential impedance with matched length within 150 mils to meet USB 2.0 full-speed signal integrity. Place the 27% series resistor on D+ close to the MCU per USB specification. JTAG TMS/TCK/TDO/TDI lines should each have a series ferrite or 100 ohm resistor near the MCU for EMI suppression during in-circuit programming.
Do not leave the MCLR pin floating - tie it through a 10 kOhm pull-up to VDD, or use Microchip's recommended 1 kOhm for high-noise industrial environments. Configure unused I/O pins as outputs driven low, not as inputs, to avoid shoot-through current. When using the internal 8 MHz Fast RC (FRC) oscillator, calibrate via the PLL after each reset using the FPLLIDIV/FPLLMULT registers - FRC drift over temperature can reach 2-3% without calibration. The peripheral pin select (PPS) lock bits must be cleared before reassigning peripherals between code modules, or the configuration write is silently ignored.
Estimated: at 80 MHz full-load with all peripherals active, the PIC32MX450F128LT-I/PT consumes approximately 60-80 mA (3.3 V x 0.07 A = ~230 mW). The 100-pin TQFP (PT) package has typical theta_JA of approximately 38-42 C/W on a standard 4-layer JEDEC test board. With junction-to-ambient of 40 C/W, the device can absorb the 230 mW without exceeding the 125 C junction limit up to about 85 C ambient. In high-temperature industrial enclosures, increasing copper pours around the exposed thermal pad or adding airflow extends safe operation.
Informations de conformité
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose PIC32MX370F512H-I/PT or industrial-rated variants for harsh environments. Industrial temperature grade -I covers -40 C to +85 C.
