PIC32MZ0512EFF064T-I/MR - 200MHz 32-bit MCU, 512KB Flash | Microchip
Référence : PIC32MZ0512EFF064T-I/MR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.5 | $4,50 |
| 10 | $4.05 | $40,50 |
| 100 | $3.55 | $355,00 |
| 500 | $3.05 | $1 525,00 |
| 1 000 | $2.55 | $2 550,00 |
PIC32MZ0512EFF064T-I/MR Présentation
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, RAM, and a rich set of peripherals on a single die, enabling standalone embedded control. Within the broader semiconductor taxonomy, an MCU is a sub-category of microprocessors optimized for low power, deterministic real-time I/O, and small form-factor PCB integration. The PIC32MZ EF family specifically targets high-performance connected embedded designs that previously required a discrete MPU plus external peripherals.
The PIC32MZ0512EFF064T-I/MR features 46 user I/O lines, multiple communication peripherals (UART, SPI, I2C, SQI, USB-HS, Ethernet, CAN), a 12-bit ADC with up to 48 channels, DMA with eight independent channels, and a 200 MHz core capable of 330 DMIPS and 1.5 DMIPS/MHz. The integrated FPU accelerates single- and double-precision floating-point math, simplifying sensor fusion, motor control, and audio DSP code. Live-Update Flash allows two independent Flash banks for in-field firmware upgrades without downtime, a key requirement for connected industrial and IoT endpoints.
Architecturally, the PIC32MZ0512EFF064T-I/MR pairs the MIPS M-Class core with a multi-layer bus matrix that lets CPU, DMA, and the Ethernet MAC access RAM without contention. The 200 MHz operation with HS USB 2.0 (480 Mbps), 10/100 Ethernet MAC, dual CAN, and SQI delivering up to 80 MB/s to external Flash make this part a complete industrial connectivity node. The 9 mm x 9 mm QFN package with 0.5 mm pitch and an exposed pad supports compact PCB layouts while maintaining the thermal envelope required for industrial environments.
Typical applications include industrial Ethernet gateways, USB audio class devices, CAN-based motor control nodes, graphical HMI panels, secure IoT edge nodes with encrypted firmware updates, multi-protocol industrial sensors, and automotive body/HMI subsystems requiring the same connectivity peripherals. The wide peripheral set eliminates external bridges, lowering both BOM cost and PCB area. When designing with this MCU, observe the 3.3 V (2.1 V to 3.6 V) supply window, route the exposed pad to a continuous ground plane, and provide separate analog and digital supply domains to maximize ADC accuracy. The Live-Update Flash feature requires careful linker-script planning to balance code across both banks. This page consolidates distributor pricing, parametric data, drop-in alternatives, and design notes beyond what is found in the manufacturer datasheet.
Alternatives de remplacement direct pour PIC32MZ0512EFF064T-I/MR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ0512EFF064T-I/MR (même facteur de forme et même empreinte) — différant par ADC, Package, Operating Temperature, Core Architecture, FPU.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ0512EFF064T-I/MR
✅ Remplacement direct✓ En stock
$2.55 / unité
Voir la fiche technique →PIC32MZ0512EFF064T-E/MR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ0512EFE064-E/MR
✅ Remplacement direct✓ En stock
$6.86 / unité
Voir la fiche technique →PIC32MZ0512EFF064-E/PT
✅ Remplacement direct✓ En stock
$6.1 / unité
Voir la fiche technique →PIC32MZ0512EFF064T-250I/MR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ0512EFF064T-I/MR Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M-Class |
| Bit Width | 32-bit |
| Maximum CPU Frequency | 200 MHz |
| Floating Point Unit (FPU) | Yes (single/double precision) |
| Program Memory (Flash) | 512 KB (512K x 8) |
| Data Memory (SRAM) | 128 KB |
| Operating Voltage | 2.1 V to 3.6 V (3.3 V typical) |
| I/O Pins | 46 |
| Boîtier | 64-QFN (9x9 mm) with exposed pad |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +85C (Industrial) |
| USB | USB 2.0 High-Speed PHY (480 Mbps) |
| Ethernet | 10/100 MAC (RMII/MII) |
| CAN | 2x CAN 2.0b |
| Serial Quad Interface (SQI) | Yes (up to 80 MB/s) |
| DMA Channels | 8 |
| ADC | 12-bit, up to 48 channels |
| Crypto Engine | No (no Crypto variant) |
| Niveau MSL | 3 |
| Statut RoHS | Compliant |
Guide de configuration des broches du PIC32MZ0512EFF064T-I/MR 64-qfn (9x9 mm) with exposed pad
Configuration des broches du PIC32MZ0512EFF064T-I/MR (boîtier 64-qfn (9x9 mm) with exposed pad). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC32MZ0512EFF064T-I/MR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC32MZ0512EFF064T-I/MR convient pour 6 applications: Industrial Ethernet Gateway, USB Audio Class Device, CAN-Based Motor Control Node, Graphical HMI Panel, Multi-Protocol IoT Sensor Hub, Automotive Body Control Module.
Industrial Ethernet Gateway
The PIC32MZ0512EFF064T-I/MR is purpose-built for industrial Ethernet gateways thanks to its integrated 10/100 MAC with RMII/MII, dual CAN 2.0b controllers, and 512 KB of Flash sufficient for TCP/IP stacks plus industrial protocols. With 200 MHz MIPS performance and the hardware FPU accelerating TLS handshake crypto, this MCU serves as a single-chip bridge between Modbus TCP, EtherNet/IP, and fieldbus networks. The 128 KB SRAM buffers concurrent Ethernet and CAN traffic without packet loss. Designers benefit from eliminating external PHY plus bridge ICs, reducing BOM cost by 30-40%.
Recommandé
USB Audio Class Device
The PIC32MZ0512EFF064T-I/MR's integrated USB 2.0 High-Speed PHY (480 Mbps) and hardware FPU make it ideal for USB audio class 2.0 devices such as DACs, headphone amplifiers, and USB microphones. Audio sample rates up to 384 kHz are handled in software with negligible CPU load thanks to the DMA-driven architecture. The 12-bit ADC with up to 48 channels supports analog microphone arrays, while SQI provides fast access to firmware updates. Industrial-grade -40C to +85C operation allows the same firmware to be used across consumer and pro-audio product lines.
Recommandé
CAN-Based Motor Control Node
With dual CAN 2.0b controllers, a 200 MHz MIPS core, and a hardware FPU, the PIC32MZ0512EFF064T-I/MR serves as an intelligent motor control node on industrial CAN networks. The 12-bit ADC samples phase currents at 1 MSPS for field-oriented control (FOC) loops, while the 8 DMA channels move ADC samples to RAM without CPU intervention. The Live-Update Flash feature enables safe firmware upgrades on motor controllers where downtime is unacceptable. 46 GPIO pins drive gate drivers, encoders, and Hall sensors directly.
Recommandé
Graphical HMI Panel
The PIC32MZ0512EFF064T-I/MR drives small-to-medium graphical HMI panels using its 200 MHz core and 512 KB Flash to store emWin or LVGL graphics libraries. The integrated SQI interface provides up to 80 MB/s throughput to external serial Flash where bitmap assets and Chinese fonts reside. The 12-bit ADC reads touch-screen analog signals, and 46 GPIOs handle LCD backlight, keypads, and indicator LEDs. Single 3.3 V supply operation simplifies power-tree design for sealed IP65 HMI enclosures deployed on factory floors.
Recommandé
Multi-Protocol IoT Sensor Hub
The PIC32MZ0512EFF064T-I/MR consolidates USB, Ethernet, dual CAN, and multiple UART/SPI/I2C ports into a single-chip IoT sensor hub that aggregates data from diverse field sensors. The hardware FPU runs edge AI inference on temperature, vibration, or acoustic data before publishing via MQTT or CoAP. Live-Update Flash enables OTA firmware rollouts without service interruption, while the 128 KB SRAM buffers transient sensor bursts. The 9x9 mm QFN footprint suits compact DIN-rail enclosures deployed in industrial IoT retrofits.
Recommandé
Automotive Body Control Module
The AEC-Q100 qualified PIC32MZ0512EFF064T-E/MR variant extends the PIC32MZ0512EFF064T-I/MR's connectivity feature set into automotive body and HMI applications. Dual CAN 2.0b ports connect to vehicle CAN-FD body and chassis networks, the 200 MHz core runs AUTOSAR MCAL drivers, and the 12-bit ADC reads battery voltage, switch positions, and lighting current. The hardware FPU simplifies BMS state-of-charge calculations. Operating temperature extends to +125C, suitable for under-dash and engine-bay-adjacent deployments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ0512EFF064T-I/MR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ0512EFF064T-I/MR | PIC32MZ0512EFF064T-E/MR | PIC32MZ0512EFE064-E/MR | PIC32MZ0512EFF064-E/PT | PIC32MZ0512EFF064T-250I/MR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9x9) | 64-QFN (9x9) - same | 64-QFN (9x9) - same | 64-QFN (9x9) - same | 64-TQFP (10x10) | 64-QFN (9x9) - same |
| Maximum CPU Frequency | 200 MHz | 200 MHz | 180 MHz | 200 MHz | 200 MHz | 252 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +85C |
| AEC-Q100 Automotive Qualified | No | No | Yes | Yes | Yes | No |
| Floating Point Unit | Yes | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated HS USB 2.0 PHY plus 10/100 Ethernet MAC plus dual CAN 2.0b (vs PIC32MX575F512L-80I/PT)
- Hardware Floating Point Unit with single/double precision (vs PIC32MX795F512LT-80I/PT)
- Live-Update Flash with dual-bank architecture (vs PIC32MX570F512LT-I/PT)
Notes de conception
The PIC32MZ0512EFF064T-I/MR requires a stable 3.3 V supply within the 2.1 V to 3.6 V operating window. Place a 10 uF bulk capacitor plus a 100 nF decoupling capacitor within 5 mm of each VDDCORE, VDDIO, and VDDPHY pin. Use a low-noise LDO such as the TPS7A4533 or a buck converter with at least 200 mA capability. The HS USB PHY requires a dedicated 3.3 V analog rail filtered through a ferrite bead to prevent digital switching noise from degrading USB signal integrity.
At 200 MHz with all peripherals active, the PIC32MZ0512EFF064T-I/MR draws up to 90 mA from the core supply. The 64-pin QFN exposed thermal pad must be soldered to a continuous ground plane with at least 25 thermal vias (0.3 mm drill, 0.6 mm pitch) to dissipate heat. On 4-layer PCBs with a 2 oz inner copper layer, this provides approximately 35 C/W thermal resistance. Industrial designs must derate for the upper +85C ambient and the 1.5 W maximum power dissipation.
Route the SQI bus signals (SQIO0-SQIO3, SCK) as matched-length traces within 2 mm of each other and keep total length below 50 mm to maintain signal integrity at 80 MB/s. Place a series 33 ohm resistor at the MCU end of each SQI trace for impedance matching. For USB differential pair (DP, DN), maintain 90 ohm differential impedance and keep traces length-matched within 150 mil. Provide a 27 ohm series resistor on each USB line as recommended in the Microchip datasheet.
The Live-Update Flash feature requires that firmware be split into two banks; the linker script must assign boot code and interrupt vectors to GOTO-safe regions in each bank to avoid bricking the device on a partial flash write. Do not exceed 100,000 flash erase cycles per bank or 20 years data retention. The HS USB PHY requires precise 24 MHz reference clock accuracy within 50 ppm to meet USB 2.0 timing specifications. Use a crystal oscillator rather than an internal FRC for USB applications.
Informations de conformité
RoHS compliant per Microchip product page. Industrial -I grade is not AEC-Q100; choose PIC32MZ0512EFF064T-E/MR for automotive AEC-Q100 applications.
