PIC32MZ1024ECH100T-I/PF - 200MHz 1MB Flash MCU | Microchip
Référence : PIC32MZ1024ECH100T-I/PF ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.1 | $131,00 |
| 100 | $11.65 | $1 165,00 |
| 500 | $10.45 | $5 225,00 |
| 1 000 | $9.25 | $9 250,00 |
| 3 000 | $8.4 | $25 200,00 |
PIC32MZ1024ECH100T-I/PF Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals. The PIC32MZ family extends this concept with a 32-bit MIPS core that delivers 1.5 DMIPS/MHz, a hardware Memory Management Unit (MMU) for embedded OS support, and high-speed connectivity peripherals such as Ethernet, CAN, USB, and SQI. The PIC32MZ1024ECH100T-I/PF sits at the high-integration end of the family, where 1 MB of Flash enables full TCP/IP stacks, graphics libraries, and safety firmware to coexist in one device.
Key features of this part include a 200 MHz core clock, 1 MB (1M x 8) Flash program memory, 512 KB SRAM, a 10-bit 500 KSPS 40-channel ADC, dual CAN 2.0b modules, 10/100 Ethernet MAC, USB 2.0 high-speed OTG, SQI interface for external serial Flash/XIP, six UART, four SPI, five I2C, PMP/EBI, and two I2S ports for audio. A built-in 8-channel DMA, four 64-bit accumulators, and DSP-enhanced instructions let signal-processing tasks run without burdening the CPU.
Typical applications include industrial HMI panels with TFT displays, factory automation controllers with EtherCAT/CANopen bridges, connected IoT gateways with on-chip Ethernet, medical patient-monitoring devices requiring deterministic DSP, automotive infotainment and telematics modules, and embedded-OS platforms running FreeRTOS, OpenRTOS, or Micrium on top of the MMU. The 100-pin TQFP footprint is also convenient for hand-rework prototypes and low-cost four-layer PCBs.
When designing with the PIC32MZ1024ECH100T-I/PF, ensure a stable 3.3 V core supply and respect the 200 MHz maximum clock; bypass capacitors must be placed within 3 mm of each VDD/VSS pair, and the SQI lines should be length-matched if the external serial Flash is used for XIP. The pin-compatible -I/PF (non-T) variant is recommended for production runs that do not require tape-and-reel packaging.
Alternatives de remplacement direct pour PIC32MZ1024ECH100T-I/PF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024ECH100T-I/PF (même facteur de forme et même empreinte) — différant par Core Architecture, ADC, USB, Package, Ethernet.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024ECH100-I/PF
✅ Remplacement direct✓ En stock
$8.74 / unité
Voir la fiche technique →PIC32MZ1024ECH100T-I/PT
✅ Remplacement direct✓ En stock
$8.99 / unité
Voir la fiche technique →PIC32MZ1024ECH100T-E/PF
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ1024ECG100T-I/PF
✅ Remplacement direct✓ En stock
$6.75 / unité
Voir la fiche technique →PIC32MZ1024ECH064-I/PT
✅ Remplacement direct✓ En stock
$7.2 / unité
Voir la fiche technique →PIC32MZ1024ECH100T-I/PF Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv (PIC32MZ) |
| Core Frequency | 200 MHz |
| DMIPS | 330 DMIPS |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 512 KB |
| Operating Voltage | 3.3 V (2.3 V to 3.6 V) |
| ADC | 10-bit, 500 KSPS, 40-channel |
| Ethernet | 10/100 MAC |
| USB | USB 2.0 High-Speed OTG |
| CAN | 2x CAN 2.0b |
| UART | 6 |
| SPI | 4 (with I2S support on selected ports) |
| I2C | 5 |
| SQI | Yes (Serial Quad Interface for XIP) |
| PMP/EBI | Yes |
| DMA Channels | 8 |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Boîtier | 100-pin TQFP (14x14 mm) |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (168 hours) |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MZ1024ECH100T-I/PF
| Broche 1 | RG15 — General purpose I/O pin 15 of port G |
| Broche 2 | VDD — 3.3 V digital supply |
| Broche 3 | RPC0 — General purpose I/O / CAN1 RX |
| Broche 4 | RPC1 — General purpose I/O / CAN1 TX |
| Broche 5 | RPC2 — General purpose I/O / CAN2 RX |
| Broche 6 | RPC3 — General purpose I/O / CAN2 TX |
| Broche 7 | RPC4 — General purpose I/O |
| Broche 8 | VSS — Digital ground |
| Broche 9 | RPC5 — General purpose I/O |
| Broche 10 | RPC6 — General purpose I/O |
| Broche 11 | RPC7 — General purpose I/O |
| Broche 12 | RPC8 — General purpose I/O / UART1 TX |
| Broche 13 | RPC9 — General purpose I/O / UART1 RX |
| Broche 14 | VDD — 3.3 V digital supply |
| Broche 15 | VSS — Digital ground |
| Broche 16 | AN0/CVD0/RPA0 — Analog input 0 / port A bit 0 |
| Broche 17 | AN1/CVD1/RPA1 — Analog input 1 / port A bit 1 |
| Broche 18 | AN2/CVD2/RPA2 — Analog input 2 / port A bit 2 |
| Broche 19 | AN3/CVD3/RPA3 — Analog input 3 / port A bit 3 |
| Broche 20 | AN4/CVD4/RPA4 — Analog input 4 / port A bit 4 |
| Broche 21 | AN5/CVD5/RPA5 — Analog input 5 / port A bit 5 |
| Broche 22 | AN6/CVD6/RPA6 — Analog input 6 / port A bit 6 |
| Broche 23 | AN7/CVD7/RPA7 — Analog input 7 / port A bit 7 |
| Broche 24 | VSS — Digital ground |
| Broche 25 | AVDD — Analog 3.3 V supply |
| Broche 26 | AVSS — Analog ground |
| Broche 27 | AN8/CVD8/RPB0 — Analog input 8 / port B bit 0 |
| Broche 28 | AN9/CVD9/RPB1 — Analog input 9 / port B bit 1 |
| Broche 29 | AN10/CVD10/RPB2 — Analog input 10 / port B bit 2 |
| Broche 30 | AN11/CVD11/RPB3 — Analog input 11 / port B bit 3 |
| Broche 31 | AN12/CVD12/RPB4 — Analog input 12 / port B bit 4 |
| Broche 32 | AN13/CVD13/RPB5 — Analog input 13 / port B bit 5 |
| Broche 33 | AN14/CVD14/RPB6 — Analog input 14 / port B bit 6 |
| Broche 34 | AN15/CVD15/RPB7 — Analog input 15 / port B bit 7 |
| Broche 35 | VSS — Digital ground |
| Broche 36 | VDD — 3.3 V digital supply |
| Broche 37 | AN16/CVD16/RPB8 — Analog input 16 / port B bit 8 |
| Broche 38 | AN17/CVD17/RPB9 — Analog input 17 / port B bit 9 |
| Broche 39 | AN18/CVD18/RPB10 — Analog input 18 / port B bit 10 |
| Broche 40 | AN19/CVD19/RPB11 — Analog input 19 / port B bit 11 |
| Broche 41 | AN20/CVD20/RPB12 — Analog input 20 / port B bit 12 |
| Broche 42 | AN21/CVD21/RPB13 — Analog input 21 / port B bit 13 |
| Broche 43 | AN22/CVD22/RPB14 — Analog input 22 / port B bit 14 |
| Broche 44 | AN23/CVD23/RPB15 — Analog input 23 / port B bit 15 |
| Broche 45 | VSS — Digital ground |
| Broche 46 | VDD — 3.3 V digital supply |
| Broche 47 | AN24/RPC10 — Analog input 24 / port C bit 10 |
| Broche 48 | AN25/RPC11 — Analog input 25 / port C bit 11 |
| Broche 49 | AN26/RPC12 — Analog input 26 / port C bit 12 |
| Broche 50 | AN27/RPC13 — Analog input 27 / port C bit 13 |
| Broche 51 | AN28/RPC14 — Analog input 28 / port C bit 14 |
| Broche 52 | AN29/RPC15 — Analog input 29 / port C bit 15 |
| Broche 53 | VSS — Digital ground |
| Broche 54 | VDD — 3.3 V digital supply |
| Broche 55 | RPD0 — General purpose I/O / INT0 |
| Broche 56 | RPD1 — General purpose I/O / INT1 |
| Broche 57 | RPD2 — General purpose I/O / INT2 |
| Broche 58 | RPD3 — General purpose I/O / INT3 |
| Broche 59 | RPD4 — General purpose I/O / INT4 |
| Broche 60 | RPD5 — General purpose I/O |
| Broche 61 | RPD6/RPF0 — General purpose I/O |
| Broche 62 | RPD7/RPF1 — General purpose I/O |
| Broche 63 | RPF2 — General purpose I/O |
| Broche 64 | RPF3 — General purpose I/O |
| Broche 65 | RPF4 — General purpose I/O |
| Broche 66 | RPF5 — General purpose I/O |
| Broche 67 | VSS — Digital ground |
| Broche 68 | VDD — 3.3 V digital supply |
| Broche 69 | ERXD0/RA14 — Ethernet RMII receive data 0 |
| Broche 70 | ERXD1/RA15 — Ethernet RMII receive data 1 |
| Broche 71 | ERXERR/RA9 — Ethernet RMII receive error |
| Broche 72 | ECRSDV/RA10 — Ethernet RMII carrier sense / data valid |
| Broche 73 | ETXD0/RPG6 — Ethernet RMII transmit data 0 |
| Broche 74 | ETXD1/RPG7 — Ethernet RMII transmit data 1 |
| Broche 75 | ETXEN/RPG8 — Ethernet RMII transmit enable |
| Broche 76 | EMDC/RJ8 — Ethernet management data clock |
| Broche 77 | EMDIO/RJ9 — Ethernet management data I/O |
| Broche 78 | VSS — Digital ground |
| Broche 79 | VDD — 3.3 V digital supply |
| Broche 80 | SQICS/RJ10 — SQI chip select |
| Broche 81 | SQISCK/RJ11 — SQI serial clock |
| Broche 82 | SQID0/RJ12 — SQI data 0 |
| Broche 83 | SQID1/RJ13 — SQI data 1 |
| Broche 84 | SQID2/RJ14 — SQI data 2 |
| Broche 85 | SQID3/RJ15 — SQI data 3 |
| Broche 86 | USB_DP/RK3 — USB D+ data line |
| Broche 87 | USB_DM/RK4 — USB D- data line |
| Broche 88 | USB_VBUS/RK5 — USB VBUS sense |
| Broche 89 | USB_ID/RK6 — USB OTG ID |
| Broche 90 | VSS — Digital ground |
| Broche 91 | VDD — 3.3 V digital supply |
| Broche 92 | RPE0/PWM1 — General purpose I/O / PWM output 1 |
| Broche 93 | RPE1/PWM2 — General purpose I/O / PWM output 2 |
| Broche 94 | RPE2/PWM3 — General purpose I/O / PWM output 3 |
| Broche 95 | RPE3/PWM4 — General purpose I/O / PWM output 4 |
| Broche 96 | RPE4/PWM5 — General purpose I/O / PWM output 5 |
| Broche 97 | RPE5/PWM6 — General purpose I/O / PWM output 6 |
| Broche 98 | RPE6 — General purpose I/O |
| Broche 99 | RPE7 — General purpose I/O |
| Broche 100 | RPE8 — General purpose I/O |
Applications typiques
PIC32MZ1024ECH100T-I/PF convient pour 6 applications: Industrial HMI Touch Panels, Connected IoT Gateways, Factory Automation Controllers (CANopen/EtherCAT), Medical Patient Monitoring, Automotive Infotainment and Telematics, Embedded OS Platforms (FreeRTOS/OpenRTOS).
Industrial HMI Touch Panels
The PIC32MZ1024ECH100T-I/PF powers 4.3" to 7" industrial HMI touch panels where the PMP/EBI interface directly drives TFT displays up to 800x480 resolution. Its 200 MHz core runs the MPLAB Harmony graphics library while the 512 KB SRAM holds double-buffered framebuffers and widget structures. The 1 MB Flash stores the full graphics stack plus application code with room for OTA updates via the SQI-attached Winbond W25Q Flash.
Recommandé
Connected IoT Gateways
In Ethernet-connected IoT gateways, the PIC32MZ1024ECH100T-I/PF runs MQTT or HTTP clients alongside TCP/IP stacks thanks to its 10/100 Ethernet MAC paired with an external LAN8720A PHY. The 200 MHz core processes TLS handshakes in software while DMA channels move packet data without CPU intervention. The 1 MB Flash holds full mbedTLS plus application firmware with USB 2.0 HS OTG available for local configuration.
Recommandé
Factory Automation Controllers (CANopen/EtherCAT)
The PIC32MZ1024ECH100T-I/PF runs CANopen or EtherCAT slave stacks on its dual CAN 2.0b controllers and 10/100 Ethernet MAC simultaneously. The 330 DMIPS core handles deterministic PDO mapping at 1 ms cycle, while DMA-driven ADC sampling collects analog sensor data without jitter. Industrial -40C to +85C operation allows DIN-rail mounting without derating, and the 100-TQFP footprint fits compact 4-layer PCBs.
Recommandé
Medical Patient Monitoring
Medical patient monitors leverage the PIC32MZ1024ECH100T-I/PF's 10-bit 500 KSPS 40-channel ADC for multi-lead ECG, SpO2, and temperature acquisition. The DSP-enhanced MIPS core with four 64-bit accumulators runs FFT-based heart-rate variability analysis in real time. Industrial -40C to +85C operation and 3.3 V single supply simplify IEC 60601-1 isolation design, while USB OTG enables bedside data export to clinician tablets.
Recommandé
Automotive Infotainment and Telematics
Automotive telematics control units use the PIC32MZ1024ECH100T-I/PF to bridge CAN 2.0b vehicle networks with cloud connectivity over Ethernet or USB. The 200 MHz MIPS core runs CANopen or OBD-II parsing alongside TLS-secured MQTT clients. While this part is industrial-grade, automotive customers often pair it with PIC32MZ1024ECH100T-E/PF (extended grade) or migrate to PIC32MZ EF family AEC-Q100 qualified parts for production.
Recommandé
Embedded OS Platforms (FreeRTOS/OpenRTOS)
The PIC32MZ1024ECH100T-I/PF runs FreeRTOS, OpenRTOS, or Micrium uC/OS-III on its MIPS32 microAptiv core with hardware Memory Management Unit (MMU) for process isolation. The 200 MHz clock supports kernel tick rates up to 1 kHz with comfortable headroom for application tasks. 1 MB Flash holds the kernel plus middleware, and 512 KB SRAM supports multiple process stacks and message queues in industrial gateways.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024ECH100T-I/PF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024ECH100-I/PF | PIC32MZ1024ECH100T-I/PT | PIC32MZ1024ECH100T-E/PF | PIC32MZ1024ECG100T-I/PF | PIC32MZ1024ECH064-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) | TQFP-100 (12x12 mm) | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) | TQFP-64 (12x12 mm) |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
| Ethernet + CAN + USB | Yes (all three) | Yes (all three) | Yes (all three) | Yes (all three) | Yes (all three) | Yes (all three) |
| Dual Panel Flash (Live Update) | Yes | Yes | Yes | Yes | Yes (ECC enabled) | Yes |
Principaux différenciateurs
- Same die as PIC32MZ1024ECH100-I/PF with tape-and-reel packaging (vs PIC32MZ1024ECH100-I/PF)
- Extended temperature drop-in available (vs PIC32MZ1024ECH100T-E/PF)
- ECC-enabled Flash variant available in same footprint (vs PIC32MZ1024ECG100T-I/PF)
- Higher DMIPS than PIC32MX alternatives (vs PIC32MX795F512L-80I/PF)
Notes de conception
Place a 10 uF bulk capacitor within 3 mm of each VDD/VSS pair on the PIC32MZ1024ECH100T-I/PF, plus a 0.1 uF ceramic bypass on every supply pin. The 200 MHz core draws bursts of up to 80 mA, and an LC-decoupled 3.3 V LDO (e.g. MIC29150) is recommended ahead of the MCU. The AVDD analog supply should be filtered with a ferrite bead and 10 uF + 0.1 uF network to keep ADC noise below 1 LSB at 500 KSPS.
Route the Ethernet RMII traces (ETXD0/1, ERXD0/1, ECRSDV, EREFCLK) with 50 ohm controlled impedance and keep them under 50 mm total length to meet IEEE 802.3 timing. Place the LAN8720A PHY within 25 mm of the MCU. The USB DP/DM traces require 90 ohm differential impedance, no stubs, and a common-mode choke near the connector to pass USB-IF compliance testing.
The PIC32MZ1024ECH100T-I/PF industrial part is rated for -40C to +85C ambient operation. At 200 MHz with full peripheral activity the core dissipation is approximately 350 mW, which keeps the junction-to-ambient rise below 25 C/W on a 4-layer PCB with a continuous ground pour. For enclosed plastic housings, validate thermals in a chamber rather than relying on datasheet theta_JA alone.
Do not skip the 32.768 kHz secondary oscillator crystal on the SOSC pins if you plan to use RTCC, Deep Sleep, or DSU keep-alive features. The SQI bus requires Winbond or Macronix Flash with Quad-Enable bit set, otherwise boot will hang. Always program the DEVCFG0/1/2/3 configuration words before code that disables the debugger, otherwise brick recovery requires ICSP.
Informations de conformité
RoHS compliant per Microchip product page. Industrial temperature grade only - not AEC-Q100 qualified; choose PIC32MZ EF AEC-Q100 variants for automotive production.
