PIC32MZ1024ECH100T-I/PF - 200MHz 1MB Flash MCU | Microchip
Артикул: PIC32MZ1024ECH100T-I/PF ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.1 | $131,00 |
| 100 | $11.65 | $1.165,00 |
| 500 | $10.45 | $5.225,00 |
| 1.000 | $9.25 | $9.250,00 |
| 3.000 | $8.4 | $25.200,00 |
PIC32MZ1024ECH100T-I/PF Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals. The PIC32MZ family extends this concept with a 32-bit MIPS core that delivers 1.5 DMIPS/MHz, a hardware Memory Management Unit (MMU) for embedded OS support, and high-speed connectivity peripherals such as Ethernet, CAN, USB, and SQI. The PIC32MZ1024ECH100T-I/PF sits at the high-integration end of the family, where 1 MB of Flash enables full TCP/IP stacks, graphics libraries, and safety firmware to coexist in one device.
Key features of this part include a 200 MHz core clock, 1 MB (1M x 8) Flash program memory, 512 KB SRAM, a 10-bit 500 KSPS 40-channel ADC, dual CAN 2.0b modules, 10/100 Ethernet MAC, USB 2.0 high-speed OTG, SQI interface for external serial Flash/XIP, six UART, four SPI, five I2C, PMP/EBI, and two I2S ports for audio. A built-in 8-channel DMA, four 64-bit accumulators, and DSP-enhanced instructions let signal-processing tasks run without burdening the CPU.
Typical applications include industrial HMI panels with TFT displays, factory automation controllers with EtherCAT/CANopen bridges, connected IoT gateways with on-chip Ethernet, medical patient-monitoring devices requiring deterministic DSP, automotive infotainment and telematics modules, and embedded-OS platforms running FreeRTOS, OpenRTOS, or Micrium on top of the MMU. The 100-pin TQFP footprint is also convenient for hand-rework prototypes and low-cost four-layer PCBs.
When designing with the PIC32MZ1024ECH100T-I/PF, ensure a stable 3.3 V core supply and respect the 200 MHz maximum clock; bypass capacitors must be placed within 3 mm of each VDD/VSS pair, and the SQI lines should be length-matched if the external serial Flash is used for XIP. The pin-compatible -I/PF (non-T) variant is recommended for production runs that do not require tape-and-reel packaging.
Аналоги без доработки для PIC32MZ1024ECH100T-I/PF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MZ1024ECH100T-I/PF (тот же форм-фактор и посадочное место) — отличается по Core Architecture, ADC, USB, Package, Ethernet.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MZ1024ECH100-I/PF
✅ Прямая замена✓ В наличии
$8.74 / шт.
Открыть даташит →PIC32MZ1024ECH100T-I/PT
✅ Прямая замена✓ В наличии
$8.99 / шт.
Открыть даташит →PIC32MZ1024ECH100T-E/PF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ1024ECG100T-I/PF
✅ Прямая замена✓ В наличии
$6.75 / шт.
Открыть даташит →PIC32MZ1024ECH064-I/PT
✅ Прямая замена✓ В наличии
$7.2 / шт.
Открыть даташит →PIC32MZ1024ECH100T-I/PF Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 microAptiv (PIC32MZ) |
| Core Frequency | 200 MHz |
| DMIPS | 330 DMIPS |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 512 KB |
| Operating Voltage | 3.3 V (2.3 V to 3.6 V) |
| ADC | 10-bit, 500 KSPS, 40-channel |
| Ethernet | 10/100 MAC |
| USB | USB 2.0 High-Speed OTG |
| CAN | 2x CAN 2.0b |
| UART | 6 |
| SPI | 4 (with I2S support on selected ports) |
| I2C | 5 |
| SQI | Yes (Serial Quad Interface for XIP) |
| PMP/EBI | Yes |
| DMA Channels | 8 |
| Рабочая температура | -40C to +85C (Industrial) |
| Корпус | 100-pin TQFP (14x14 mm) |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 (168 hours) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MZ1024ECH100T-I/PF
| Контакт 1 | RG15 — General purpose I/O pin 15 of port G |
| Контакт 2 | VDD — 3.3 V digital supply |
| Контакт 3 | RPC0 — General purpose I/O / CAN1 RX |
| Контакт 4 | RPC1 — General purpose I/O / CAN1 TX |
| Контакт 5 | RPC2 — General purpose I/O / CAN2 RX |
| Контакт 6 | RPC3 — General purpose I/O / CAN2 TX |
| Контакт 7 | RPC4 — General purpose I/O |
| Контакт 8 | VSS — Digital ground |
| Контакт 9 | RPC5 — General purpose I/O |
| Контакт 10 | RPC6 — General purpose I/O |
| Контакт 11 | RPC7 — General purpose I/O |
| Контакт 12 | RPC8 — General purpose I/O / UART1 TX |
| Контакт 13 | RPC9 — General purpose I/O / UART1 RX |
| Контакт 14 | VDD — 3.3 V digital supply |
| Контакт 15 | VSS — Digital ground |
| Контакт 16 | AN0/CVD0/RPA0 — Analog input 0 / port A bit 0 |
| Контакт 17 | AN1/CVD1/RPA1 — Analog input 1 / port A bit 1 |
| Контакт 18 | AN2/CVD2/RPA2 — Analog input 2 / port A bit 2 |
| Контакт 19 | AN3/CVD3/RPA3 — Analog input 3 / port A bit 3 |
| Контакт 20 | AN4/CVD4/RPA4 — Analog input 4 / port A bit 4 |
| Контакт 21 | AN5/CVD5/RPA5 — Analog input 5 / port A bit 5 |
| Контакт 22 | AN6/CVD6/RPA6 — Analog input 6 / port A bit 6 |
| Контакт 23 | AN7/CVD7/RPA7 — Analog input 7 / port A bit 7 |
| Контакт 24 | VSS — Digital ground |
| Контакт 25 | AVDD — Analog 3.3 V supply |
| Контакт 26 | AVSS — Analog ground |
| Контакт 27 | AN8/CVD8/RPB0 — Analog input 8 / port B bit 0 |
| Контакт 28 | AN9/CVD9/RPB1 — Analog input 9 / port B bit 1 |
| Контакт 29 | AN10/CVD10/RPB2 — Analog input 10 / port B bit 2 |
| Контакт 30 | AN11/CVD11/RPB3 — Analog input 11 / port B bit 3 |
| Контакт 31 | AN12/CVD12/RPB4 — Analog input 12 / port B bit 4 |
| Контакт 32 | AN13/CVD13/RPB5 — Analog input 13 / port B bit 5 |
| Контакт 33 | AN14/CVD14/RPB6 — Analog input 14 / port B bit 6 |
| Контакт 34 | AN15/CVD15/RPB7 — Analog input 15 / port B bit 7 |
| Контакт 35 | VSS — Digital ground |
| Контакт 36 | VDD — 3.3 V digital supply |
| Контакт 37 | AN16/CVD16/RPB8 — Analog input 16 / port B bit 8 |
| Контакт 38 | AN17/CVD17/RPB9 — Analog input 17 / port B bit 9 |
| Контакт 39 | AN18/CVD18/RPB10 — Analog input 18 / port B bit 10 |
| Контакт 40 | AN19/CVD19/RPB11 — Analog input 19 / port B bit 11 |
| Контакт 41 | AN20/CVD20/RPB12 — Analog input 20 / port B bit 12 |
| Контакт 42 | AN21/CVD21/RPB13 — Analog input 21 / port B bit 13 |
| Контакт 43 | AN22/CVD22/RPB14 — Analog input 22 / port B bit 14 |
| Контакт 44 | AN23/CVD23/RPB15 — Analog input 23 / port B bit 15 |
| Контакт 45 | VSS — Digital ground |
| Контакт 46 | VDD — 3.3 V digital supply |
| Контакт 47 | AN24/RPC10 — Analog input 24 / port C bit 10 |
| Контакт 48 | AN25/RPC11 — Analog input 25 / port C bit 11 |
| Контакт 49 | AN26/RPC12 — Analog input 26 / port C bit 12 |
| Контакт 50 | AN27/RPC13 — Analog input 27 / port C bit 13 |
| Контакт 51 | AN28/RPC14 — Analog input 28 / port C bit 14 |
| Контакт 52 | AN29/RPC15 — Analog input 29 / port C bit 15 |
| Контакт 53 | VSS — Digital ground |
| Контакт 54 | VDD — 3.3 V digital supply |
| Контакт 55 | RPD0 — General purpose I/O / INT0 |
| Контакт 56 | RPD1 — General purpose I/O / INT1 |
| Контакт 57 | RPD2 — General purpose I/O / INT2 |
| Контакт 58 | RPD3 — General purpose I/O / INT3 |
| Контакт 59 | RPD4 — General purpose I/O / INT4 |
| Контакт 60 | RPD5 — General purpose I/O |
| Контакт 61 | RPD6/RPF0 — General purpose I/O |
| Контакт 62 | RPD7/RPF1 — General purpose I/O |
| Контакт 63 | RPF2 — General purpose I/O |
| Контакт 64 | RPF3 — General purpose I/O |
| Контакт 65 | RPF4 — General purpose I/O |
| Контакт 66 | RPF5 — General purpose I/O |
| Контакт 67 | VSS — Digital ground |
| Контакт 68 | VDD — 3.3 V digital supply |
| Контакт 69 | ERXD0/RA14 — Ethernet RMII receive data 0 |
| Контакт 70 | ERXD1/RA15 — Ethernet RMII receive data 1 |
| Контакт 71 | ERXERR/RA9 — Ethernet RMII receive error |
| Контакт 72 | ECRSDV/RA10 — Ethernet RMII carrier sense / data valid |
| Контакт 73 | ETXD0/RPG6 — Ethernet RMII transmit data 0 |
| Контакт 74 | ETXD1/RPG7 — Ethernet RMII transmit data 1 |
| Контакт 75 | ETXEN/RPG8 — Ethernet RMII transmit enable |
| Контакт 76 | EMDC/RJ8 — Ethernet management data clock |
| Контакт 77 | EMDIO/RJ9 — Ethernet management data I/O |
| Контакт 78 | VSS — Digital ground |
| Контакт 79 | VDD — 3.3 V digital supply |
| Контакт 80 | SQICS/RJ10 — SQI chip select |
| Контакт 81 | SQISCK/RJ11 — SQI serial clock |
| Контакт 82 | SQID0/RJ12 — SQI data 0 |
| Контакт 83 | SQID1/RJ13 — SQI data 1 |
| Контакт 84 | SQID2/RJ14 — SQI data 2 |
| Контакт 85 | SQID3/RJ15 — SQI data 3 |
| Контакт 86 | USB_DP/RK3 — USB D+ data line |
| Контакт 87 | USB_DM/RK4 — USB D- data line |
| Контакт 88 | USB_VBUS/RK5 — USB VBUS sense |
| Контакт 89 | USB_ID/RK6 — USB OTG ID |
| Контакт 90 | VSS — Digital ground |
| Контакт 91 | VDD — 3.3 V digital supply |
| Контакт 92 | RPE0/PWM1 — General purpose I/O / PWM output 1 |
| Контакт 93 | RPE1/PWM2 — General purpose I/O / PWM output 2 |
| Контакт 94 | RPE2/PWM3 — General purpose I/O / PWM output 3 |
| Контакт 95 | RPE3/PWM4 — General purpose I/O / PWM output 4 |
| Контакт 96 | RPE4/PWM5 — General purpose I/O / PWM output 5 |
| Контакт 97 | RPE5/PWM6 — General purpose I/O / PWM output 6 |
| Контакт 98 | RPE6 — General purpose I/O |
| Контакт 99 | RPE7 — General purpose I/O |
| Контакт 100 | RPE8 — General purpose I/O |
Типичное применение
PIC32MZ1024ECH100T-I/PF подходит для 6 применениеs: Industrial HMI Touch Panels, Connected IoT Gateways, Factory Automation Controllers (CANopen/EtherCAT), Medical Patient Monitoring, Automotive Infotainment and Telematics, Embedded OS Platforms (FreeRTOS/OpenRTOS).
Industrial HMI Touch Panels
The PIC32MZ1024ECH100T-I/PF powers 4.3" to 7" industrial HMI touch panels where the PMP/EBI interface directly drives TFT displays up to 800x480 resolution. Its 200 MHz core runs the MPLAB Harmony graphics library while the 512 KB SRAM holds double-buffered framebuffers and widget structures. The 1 MB Flash stores the full graphics stack plus application code with room for OTA updates via the SQI-attached Winbond W25Q Flash.
Рекомендуется
Connected IoT Gateways
In Ethernet-connected IoT gateways, the PIC32MZ1024ECH100T-I/PF runs MQTT or HTTP clients alongside TCP/IP stacks thanks to its 10/100 Ethernet MAC paired with an external LAN8720A PHY. The 200 MHz core processes TLS handshakes in software while DMA channels move packet data without CPU intervention. The 1 MB Flash holds full mbedTLS plus application firmware with USB 2.0 HS OTG available for local configuration.
Рекомендуется
Factory Automation Controllers (CANopen/EtherCAT)
The PIC32MZ1024ECH100T-I/PF runs CANopen or EtherCAT slave stacks on its dual CAN 2.0b controllers and 10/100 Ethernet MAC simultaneously. The 330 DMIPS core handles deterministic PDO mapping at 1 ms cycle, while DMA-driven ADC sampling collects analog sensor data without jitter. Industrial -40C to +85C operation allows DIN-rail mounting without derating, and the 100-TQFP footprint fits compact 4-layer PCBs.
Рекомендуется
Medical Patient Monitoring
Medical patient monitors leverage the PIC32MZ1024ECH100T-I/PF's 10-bit 500 KSPS 40-channel ADC for multi-lead ECG, SpO2, and temperature acquisition. The DSP-enhanced MIPS core with four 64-bit accumulators runs FFT-based heart-rate variability analysis in real time. Industrial -40C to +85C operation and 3.3 V single supply simplify IEC 60601-1 isolation design, while USB OTG enables bedside data export to clinician tablets.
Рекомендуется
Automotive Infotainment and Telematics
Automotive telematics control units use the PIC32MZ1024ECH100T-I/PF to bridge CAN 2.0b vehicle networks with cloud connectivity over Ethernet or USB. The 200 MHz MIPS core runs CANopen or OBD-II parsing alongside TLS-secured MQTT clients. While this part is industrial-grade, automotive customers often pair it with PIC32MZ1024ECH100T-E/PF (extended grade) or migrate to PIC32MZ EF family AEC-Q100 qualified parts for production.
Рекомендуется
Embedded OS Platforms (FreeRTOS/OpenRTOS)
The PIC32MZ1024ECH100T-I/PF runs FreeRTOS, OpenRTOS, or Micrium uC/OS-III on its MIPS32 microAptiv core with hardware Memory Management Unit (MMU) for process isolation. The 200 MHz clock supports kernel tick rates up to 1 kHz with comfortable headroom for application tasks. 1 MB Flash holds the kernel plus middleware, and 512 KB SRAM supports multiple process stacks and message queues in industrial gateways.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MZ1024ECH100T-I/PF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MZ1024ECH100-I/PF | PIC32MZ1024ECH100T-I/PT | PIC32MZ1024ECH100T-E/PF | PIC32MZ1024ECG100T-I/PF | PIC32MZ1024ECH064-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) | TQFP-100 (12x12 mm) | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) | TQFP-64 (12x12 mm) |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
| Ethernet + CAN + USB | Yes (all three) | Yes (all three) | Yes (all three) | Yes (all three) | Yes (all three) | Yes (all three) |
| Dual Panel Flash (Live Update) | Yes | Yes | Yes | Yes | Yes (ECC enabled) | Yes |
Ключевые отличия
- Same die as PIC32MZ1024ECH100-I/PF with tape-and-reel packaging (против PIC32MZ1024ECH100-I/PF)
- Extended temperature drop-in available (против PIC32MZ1024ECH100T-E/PF)
- ECC-enabled Flash variant available in same footprint (против PIC32MZ1024ECG100T-I/PF)
- Higher DMIPS than PIC32MX alternatives (против PIC32MX795F512L-80I/PF)
Заметки по проектированию
Place a 10 uF bulk capacitor within 3 mm of each VDD/VSS pair on the PIC32MZ1024ECH100T-I/PF, plus a 0.1 uF ceramic bypass on every supply pin. The 200 MHz core draws bursts of up to 80 mA, and an LC-decoupled 3.3 V LDO (e.g. MIC29150) is recommended ahead of the MCU. The AVDD analog supply should be filtered with a ferrite bead and 10 uF + 0.1 uF network to keep ADC noise below 1 LSB at 500 KSPS.
Route the Ethernet RMII traces (ETXD0/1, ERXD0/1, ECRSDV, EREFCLK) with 50 ohm controlled impedance and keep them under 50 mm total length to meet IEEE 802.3 timing. Place the LAN8720A PHY within 25 mm of the MCU. The USB DP/DM traces require 90 ohm differential impedance, no stubs, and a common-mode choke near the connector to pass USB-IF compliance testing.
The PIC32MZ1024ECH100T-I/PF industrial part is rated for -40C to +85C ambient operation. At 200 MHz with full peripheral activity the core dissipation is approximately 350 mW, which keeps the junction-to-ambient rise below 25 C/W on a 4-layer PCB with a continuous ground pour. For enclosed plastic housings, validate thermals in a chamber rather than relying on datasheet theta_JA alone.
Do not skip the 32.768 kHz secondary oscillator crystal on the SOSC pins if you plan to use RTCC, Deep Sleep, or DSU keep-alive features. The SQI bus requires Winbond or Macronix Flash with Quad-Enable bit set, otherwise boot will hang. Always program the DEVCFG0/1/2/3 configuration words before code that disables the debugger, otherwise brick recovery requires ICSP.
Информация о соответствии
RoHS compliant per Microchip product page. Industrial temperature grade only - not AEC-Q100 qualified; choose PIC32MZ EF AEC-Q100 variants for automotive production.
