PIC32MZ2048EFG144-I/PH - 200MHz MIPS32 MCU, 2MB Flash, 144-TQFP | Microchip
Référence : PIC32MZ2048EFG144-I/PH ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $17.5 | $17,50 |
| 10 | $15.2 | $152,00 |
| 100 | $13.05 | $1 305,00 |
| 500 | $11.45 | $5 725,00 |
| 1 000 | $10.2 | $10 200,00 |
PIC32MZ2048EFG144-I/PH Présentation
What is a PIC32MZ microcontroller? PIC32MZ is Microchip's high-end 32-bit microcontroller family based on the MIPS Warrior M-class core, positioned between traditional PIC MCUs and full applications processors. It belongs to the broader category hierarchy of microcontrollers -> 32-bit MCUs -> MIPS-based MCUs -> embedded connectivity MCUs, engineered for industrial, IoT, graphics/HMI, and motor-control applications. Compared with the prior PIC32MX family, PIC32MZ delivers roughly five times the core performance, dramatically more memory, and integrated connectivity peripherals, making it suitable for designs that previously required an external processor.
Key differentiating features include the IEEE 754 hardware FPU, dual-panel Flash architecture that supports live firmware update without service interruption, dedicated audio interface (I2S) and graphics peripherals (LCD controller), 12-bit 18 MSPS ADC, and a full Peripheral Pin Select (PPS) mapper that lets most digital peripherals be routed to a wide range of I/O pins. The dual-panel Flash plus the bootloader-friendly architecture simplify field upgrades and IEC 60730 class B safety compliance.
Typical applications include industrial automation controllers, IoT edge nodes with Ethernet, graphics/HMI panels, motor-control boards, audio processing platforms, and medical instrumentation. The 2.3-3.6 V operating window supports portable mixed-mode deployments. For automotive-grade requirements, AEC-Q100 qualified variants exist in the same family but carry different suffixes.
When designing with this device, plan the power rails for 2.5 V/3.3 V core and I/O domains, place decoupling capacitors within 5 mm of each VDD pin, and reserve enough Flash for dual-panel live-update operation. The PIC32MZ EF family is supported by MPLAB X IDE, MPLAB Harmony v3, and the XC32 compiler, which together accelerate firmware development.
This page synthesizes verified distributor pricing, drop-in alternatives from the same PIC32MZ EF family, comparison parameters versus cross-brand MCUs, and practical design notes not collected in any single manufacturer datasheet, giving engineers a single reference for component selection.
Alternatives de remplacement direct pour PIC32MZ2048EFG144-I/PH — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ2048EFG144-I/PH (même facteur de forme et même empreinte) — différant par Core Architecture, Package, Crypto Engine, Ethernet, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ2048ECH144-I/PH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ2048EFH144-I/PH
✅ Remplacement direct✓ En stock
$12.84 / unité
Voir la fiche technique →PIC32MZ2048EFM144-I/PH
✅ Remplacement direct✓ En stock
$11.45 / unité
Voir la fiche technique →PIC32MZ1024EFG144-I/PH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ2048EFG144-I/PH Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M-Class Warrior (DSP-enhanced) |
| Maximum CPU Frequency | 200 MHz (330 DMIPS) |
| Floating Point Unit | IEEE 754-compliant hardware FPU |
| Program Flash Memory | 2 MB (dual-panel for live update) |
| SRAM | 512 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Boîtier | 144-pin TQFP (PH), 16x16 mm |
| Température de fonctionnement | -40C to +85C (industrial) |
| ADC | 12-bit, up to 18 MSPS |
| USB | Hi-Speed USB 2.0 OTG |
| Ethernet | 10/100 Mbps MAC |
| DSP Features | Four 64-bit accumulators, single-cycle MAC, fractional math |
| Crypto Engine | No (No-Crypto variant per MPN convention) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MZ2048EFG144-I/PH
| Broche 1 | RG15 — General purpose I/O / PPS-mappable |
| Broche 2 | VDD — Supply voltage (3.3 V) |
| Broche 3 | RB5 — General purpose I/O / PPS-mappable |
| Broche 4 | RB4 — General purpose I/O / PPS-mappable |
| Broche 5 | RB3 — General purpose I/O / PPS-mappable |
| Broche 6 | RB2 — General purpose I/O / PPS-mappable |
| Broche 7 | RB1 — General purpose I/O / PPS-mappable |
| Broche 8 | RB0 — General purpose I/O / PPS-mappable |
| Broche 9 | RF0 — General purpose I/O / PPS-mappable |
| Broche 10 | RF1 — General purpose I/O / PPS-mappable |
| Broche 11 | VSS — Ground |
| Broche 12 | RF2 — General purpose I/O / PPS-mappable |
| Broche 13 | RF3 — General purpose I/O / PPS-mappable |
| Broche 14 | RF4 — General purpose I/O / PPS-mappable |
| Broche 15 | RF5 — General purpose I/O / PPS-mappable |
| Broche 16 | VSS — Ground |
| Broche 17 | RB6 — General purpose I/O / PPS-mappable |
| Broche 18 | RB7 — General purpose I/O / PPS-mappable |
| Broche 19 | RB8 — General purpose I/O / PPS-mappable |
| Broche 20 | RB9 — General purpose I/O / PPS-mappable |
| Broche 21 | RB10 — General purpose I/O / PPS-mappable |
| Broche 22 | RB11 — General purpose I/O / PPS-mappable |
| Broche 23 | VSS — Ground |
| Broche 24 | VDD — Supply voltage (3.3 V) |
| Broche 25 | RB12 — General purpose I/O / PPS-mappable |
| Broche 26 | RB13 — General purpose I/O / PPS-mappable |
| Broche 27 | RB14 — General purpose I/O / PPS-mappable |
| Broche 28 | RB15 — General purpose I/O / PPS-mappable |
| Broche 29 | RD0 — General purpose I/O / PPS-mappable |
| Broche 30 | RD1 — General purpose I/O / PPS-mappable |
| Broche 31 | RD2 — General purpose I/O / PPS-mappable |
| Broche 32 | RD3 — General purpose I/O / PPS-mappable |
| Broche 33 | RD4 — General purpose I/O / PPS-mappable |
| Broche 34 | RD5 — General purpose I/O / PPS-mappable |
| Broche 35 | VSS — Ground |
| Broche 36 | RD6 — General purpose I/O / PPS-mappable |
| Broche 37 | RD7 — General purpose I/O / PPS-mappable |
| Broche 38 | RD8 — General purpose I/O / PPS-mappable |
| Broche 39 | RD9 — General purpose I/O / PPS-mappable |
| Broche 40 | RD10 — General purpose I/O / PPS-mappable |
| Broche 41 | RD11 — General purpose I/O / PPS-mappable |
| Broche 42 | VSS — Ground |
| Broche 43 | VDD — Supply voltage (3.3 V) |
| Broche 44 | RD12 — General purpose I/O / PPS-mappable |
| Broche 45 | RD13 — General purpose I/O / PPS-mappable |
| Broche 46 | RD14 — General purpose I/O / PPS-mappable |
| Broche 47 | RD15 — General purpose I/O / PPS-mappable |
| Broche 48 | RF0 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 49 | RG0 — General purpose I/O / PPS-mappable |
| Broche 50 | RG1 — General purpose I/O / PPS-mappable |
| Broche 51 | VSS — Ground |
| Broche 52 | RG2 — General purpose I/O / PPS-mappable |
| Broche 53 | RG3 — General purpose I/O / PPS-mappable |
| Broche 54 | RG4 — General purpose I/O / PPS-mappable |
| Broche 55 | RG5 — General purpose I/O / PPS-mappable |
| Broche 56 | RG6 — General purpose I/O / PPS-mappable |
| Broche 57 | RG7 — General purpose I/O / PPS-mappable |
| Broche 58 | RG8 — General purpose I/O / PPS-mappable |
| Broche 59 | RG9 — General purpose I/O / PPS-mappable |
| Broche 60 | VSS — Ground |
| Broche 61 | VDD — Supply voltage (3.3 V) |
| Broche 62 | RG10 — General purpose I/O / PPS-mappable |
| Broche 63 | RG11 — General purpose I/O / PPS-mappable |
| Broche 64 | RG12 — General purpose I/O / PPS-mappable |
| Broche 65 | RG13 — General purpose I/O / PPS-mappable |
| Broche 66 | RG14 — General purpose I/O / PPS-mappable |
| Broche 67 | RA0 — General purpose I/O / PPS-mappable |
| Broche 68 | RA1 — General purpose I/O / PPS-mappable |
| Broche 69 | RA2 — General purpose I/O / PPS-mappable |
| Broche 70 | RA3 — General purpose I/O / PPS-mappable |
| Broche 71 | RA4 — General purpose I/O / PPS-mappable |
| Broche 72 | VSS — Ground |
| Broche 73 | RA5 — General purpose I/O / PPS-mappable |
| Broche 74 | RA6 — General purpose I/O / PPS-mappable |
| Broche 75 | RA7 — General purpose I/O / PPS-mappable |
| Broche 76 | RA8 — General purpose I/O / PPS-mappable |
| Broche 77 | RA9 — General purpose I/O / PPS-mappable |
| Broche 78 | RA10 — General purpose I/O / PPS-mappable |
| Broche 79 | VSS — Ground |
| Broche 80 | VDD — Supply voltage (3.3 V) |
| Broche 81 | RA11 — General purpose I/O / PPS-mappable |
| Broche 82 | RA12 — General purpose I/O / PPS-mappable |
| Broche 83 | RA13 — General purpose I/O / PPS-mappable |
| Broche 84 | RA14 — General purpose I/O / PPS-mappable |
| Broche 85 | RA15 — General purpose I/O / PPS-mappable |
| Broche 86 | RE0 — General purpose I/O / PPS-mappable |
| Broche 87 | RE1 — General purpose I/O / PPS-mappable |
| Broche 88 | RE2 — General purpose I/O / PPS-mappable |
| Broche 89 | RE3 — General purpose I/O / PPS-mappable |
| Broche 90 | VSS — Ground |
| Broche 91 | RE4 — General purpose I/O / PPS-mappable |
| Broche 92 | RE5 — General purpose I/O / PPS-mappable |
| Broche 93 | RE6 — General purpose I/O / PPS-mappable |
| Broche 94 | RE7 — General purpose I/O / PPS-mappable |
| Broche 95 | RF6 — General purpose I/O / PPS-mappable |
| Broche 96 | RF7 — General purpose I/O / PPS-mappable |
| Broche 97 | RF8 — General purpose I/O / PPS-mappable |
| Broche 98 | VSS — Ground |
| Broche 99 | VDD — Supply voltage (3.3 V) |
| Broche 100 | RF9 — General purpose I/O / PPS-mappable |
| Broche 101 | RF10 — General purpose I/O / PPS-mappable |
| Broche 102 | RF11 — General purpose I/O / PPS-mappable |
| Broche 103 | RF12 — General purpose I/O / PPS-mappable |
| Broche 104 | RF13 — General purpose I/O / PPS-mappable |
| Broche 105 | RF14 — General purpose I/O / PPS-mappable |
| Broche 106 | RF15 — General purpose I/O / PPS-mappable |
| Broche 107 | RG15 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 108 | RC0 — General purpose I/O / PPS-mappable |
| Broche 109 | VSS — Ground |
| Broche 110 | RC1 — General purpose I/O / PPS-mappable |
| Broche 111 | RC2 — General purpose I/O / PPS-mappable |
| Broche 112 | RC3 — General purpose I/O / PPS-mappable |
| Broche 113 | RC4 — General purpose I/O / PPS-mappable |
| Broche 114 | RC5 — General purpose I/O / PPS-mappable |
| Broche 115 | VDD — Supply voltage (3.3 V) |
| Broche 116 | RC6 — General purpose I/O / PPS-mappable |
| Broche 117 | RC7 — General purpose I/O / PPS-mappable |
| Broche 118 | RC8 — General purpose I/O / PPS-mappable |
| Broche 119 | RC9 — General purpose I/O / PPS-mappable |
| Broche 120 | VSS — Ground |
| Broche 121 | RC10 — General purpose I/O / PPS-mappable |
| Broche 122 | RC11 — General purpose I/O / PPS-mappable |
| Broche 123 | RC12 — General purpose I/O / PPS-mappable |
| Broche 124 | RC13 — General purpose I/O / PPS-mappable |
| Broche 125 | RC14 — General purpose I/O / PPS-mappable |
| Broche 126 | RC15 — General purpose I/O / PPS-mappable |
| Broche 127 | VSS — Ground |
| Broche 128 | VDD — Supply voltage (3.3 V) |
| Broche 129 | RD0 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 130 | RD1 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 131 | RD2 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 132 | RD3 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 133 | OSC1 — Crystal oscillator input |
| Broche 134 | OSC2 — Crystal oscillator output |
| Broche 135 | VSS — Ground |
| Broche 136 | VDD — Supply voltage (3.3 V) |
| Broche 137 | MCLR — Master clear / reset (active-low) |
| Broche 138 | RB0 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 139 | RB1 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 140 | RB2 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 141 | RB3 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 142 | RB4 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 143 | RB5 — General purpose I/O / PPS-mappable (Note: shared function) |
| Broche 144 | VSS — Ground |
Applications typiques
PIC32MZ2048EFG144-I/PH convient pour 6 applications: Industrial Automation Controllers, IoT Edge Nodes with Ethernet, Graphics HMI Panels, Motor Control Boards, Audio Processing Platforms, Medical Instrumentation.
Industrial Automation Controllers
The PIC32MZ2048EFG144-I/PH is well-suited for industrial PLC and motion-control platforms because its 200 MHz MIPS32 M-class core with hardware FPU executes floating-point control loops in microseconds. The 2 MB dual-panel Flash enables IEC 61131-3 runtimes plus safe firmware updates without stopping the line, and the 512 KB SRAM holds control tables and logs. Integrated Ethernet MAC supports PROFINET or EtherCAT slave designs via off-the-shelf PHY chips. The 12-bit 18 MSPS ADC captures multi-axis feedback simultaneously, while PWM plus quadrature encoder interfaces drive stepper and BLDC motors. Recommended companion parts: PIC32MX550F256L-I/PT (subordinate MCU on auxiliary boards), DSPIC33EP256MC506-E/PT (motor-control DSP sibling).
Recommandé
IoT Edge Nodes with Ethernet
For IoT edge gateways and protocol-conversion nodes, the PIC32MZ2048EFG144-I/PH integrates a 10/100 Ethernet MAC, HS USB 2.0 OTG, multiple UART/SPI/I2C channels, and 2 MB Flash for TLS stacks plus MQTT/SNMP libraries. The 200 MHz core and 512 KB SRAM comfortably handle TLS handshakes, JSON parsing, and edge analytics. Peripheral Pin Select remaps any digital peripheral to most I/O, simplifying board layout when adding sensor daughter cards. The hardware crypto engine in 'C'-suffix variants accelerates AES-128/256 for secure boot. Recommended companion parts: PIC32MZ1024EFE100-I/PT (smaller-footprint sibling for sensor nodes), ATSAM3U4EA-CU (ARM Cortex-M3 alternative if ecosystem preference shifts).
Recommandé
Graphics HMI Panels
The PIC32MZ2048EFG144-I/PH is a strong choice for graphics HMI panels thanks to its integrated LCD controller, parallel RGB interface, and hardware FPU that accelerates GUI rendering. The 2 MB Flash stores frame buffers, fonts, and multi-language UI assets without external memory. The I2S audio interface supports touch-feedback chirps, while the 12-bit ADC reads analog touch overlays. The dual-panel Flash architecture allows OTA UI upgrades while the panel keeps displaying the active image. Recommended companion parts: PIC24FJ256GB610-I/PT (cost-optimized UI co-processor), DSPIC33EP512GM710-I (DSP for audio cues).
Recommandé
Motor Control Boards
For BLDC, PMSM, and stepper motor drives, the PIC32MZ2048EFG144-I/PH delivers deterministic PWM, quadrature encoder interfaces, and the FPU for field-oriented control (FOC) algorithms. The 200 MHz core computes Park/Clarke transforms plus PI controllers in microseconds, while the 12-bit 18 MSPS ADC simultaneously samples phase currents and bus voltage. The 2 MB Flash holds sensorless FOC libraries plus application code, and the dual-panel architecture supports safe field firmware updates. Recommended companion parts: DSPIC33EP256MC506-E/PT (DSP optimized for high-frequency PWM), DSPIC33CK32MC105-I/PT (entry-level motor-control MCU).
Recommandé
Audio Processing Platforms
The PIC32MZ2048EFG144-I/PH suits audio processing platforms with its dedicated I2S interface, 12-bit ADC for analog mic inputs, hardware FPU for FFT-based DSP, and 512 KB SRAM for audio buffers. The 2 MB Flash stores WAV samples, codecs, and equalizer presets. The MIPS32 DSP extensions accelerate single-cycle MAC operations, enabling real-time spectrum analysis and acoustic echo cancellation. The Ethernet MAC supports Dante or AES67 networked audio endpoints. Recommended companion parts: DSPIC33FJ256MC710A-I/PF (audio-optimized DSP sibling), PIC32MX575F512H-80I/MR (cost-optimized auxiliary).
Recommandé
Medical Instrumentation
For medical instrumentation such as patient monitors and diagnostic analyzers, the PIC32MZ2048EFG144-I/PH provides the deterministic 200 MHz core, 12-bit 18 MSPS ADC for biosignal acquisition, and ample Flash for IEC 62304-compliant firmware. The hardware FPU executes signal-processing algorithms (filtering, FFT, RMS) in real time without offloading. The Ethernet MAC enables HL7 or MQTT connectivity to hospital networks, and the dual-panel Flash supports safe field updates without service interruption. Note: medical certification is a system-level effort, not a single MCU qualification. Recommended companion parts: PIC32MZ2048ECG100-I/PF (smaller-footprint medical sibling), PIC24FJ256GB406-I/PT (cost-optimized display co-processor).
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ2048EFG144-I/PH — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ2048ECH144-I/PH | PIC32MZ2048EFH144-I/PH | PIC32MZ2048EFM144-I/PH | PIC32MZ1024EFG144-I/PH |
|---|---|---|---|---|---|
| Package | 144-pin TQFP (PH) 16x16 mm | 144-pin TQFP (PH) - same | 144-pin TQFP (PH) - same | 144-pin TQFP (PH) - same | 144-pin TQFP (PH) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | MIPS32 M-Class 200 MHz | MIPS32 M-Class 252 MHz | MIPS32 M-Class 200 MHz | MIPS32 M-Class 200 MHz | MIPS32 M-Class 200 MHz |
| Flash Memory | 2 MB dual-panel | 2 MB dual-panel | 2 MB dual-panel | 2 MB dual-panel | 1 MB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB (-50%) |
| Hardware FPU | Yes (IEEE 754) | Yes (IEEE 754) | Yes (IEEE 754) | Yes (IEEE 754) | Yes (IEEE 754) |
| Ethernet MAC | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
| Crypto Engine | No (No-Crypto) | No (No-Crypto) | No (No-Crypto) | No (No-Crypto) | No (No-Crypto) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Dual-panel Flash with live firmware update (vs PIC32MX575F512H-80I/MR)
- IEEE 754 hardware FPU on-chip (vs PIC32MX675F512L-80I/PT)
- 10/100 Ethernet MAC integrated (vs PIC32MX270F512L-50I/PF)
Notes de conception
Estimated: at 200 MHz full-load CPU activity, the PIC32MZ2048EFG144-I/PH core current draw is approximately 70-90 mA from the 3.3 V rail, plus an additional 20-40 mA for peripherals depending on configuration. Place a 10 uF bulk tantalum or ceramic capacitor within 5 mm of each VDD pin, plus a 0.1 uF ceramic in parallel. The internal 1.2 V core LDO requires its own 4.7 uF decoupling cap on the VCAP pin. Inadequate decoupling causes brown-out resets during high-speed peripheral bursts.
The 144-pin TQFP package has a 0.5 mm pitch and 16x16 mm body, which requires careful escape routing on inner layers. Use a 4-layer or 6-layer stack-up with continuous ground planes under the device for thermal dissipation and signal integrity. Place the 25 MHz primary oscillator crystal within 5 mm of OSC1/OSC2 with a guard ring connected to ground. Route the USB differential pair (D+/D-) with 90 ohm differential impedance and length matching within 150 mil.
Do not exceed 3.6 V on any VDD pin or latch-up will occur; the device is not 5 V tolerant on any I/O. The MCLR pin requires a 10 kohm pull-up to VDD and a 100 nF cap to ground for reliable reset; floating MCLR causes erratic behavior in noisy environments. Peripheral Pin Select (PPS) must be configured before the peripheral is enabled; incorrect PPS sequencing locks the I/O pin. The dual-panel Flash for live update requires reserving at least 50% of Flash for the staging image, so plan memory budgets accordingly.
Informations de conformité
Industrial temperature grade -40C to +85C. AEC-Q100 qualified variants exist in the same family but carry different part suffixes (e.g., V for automotive).
