Renesas Electronics

R5F104MFAFB#30 - 32MHz 16-Bit RL78/G14 MCU | Renesas

Référence : R5F104MFAFB#30 ✓ Actif
80-LQFP, 12 x 12 mm Package 32 MHz Speed 96 KB Memory
MOQ : 1 |

R5F104MFAFB#30 Présentation

Renesas Electronics R5F104MFAFB#30 is a 16-bit RL78/G14 general-purpose microcontroller operating at 32 MHz, with 96 KB of flash memory and an 80-LQFP 12 x 12 mm package. It is designed for low-power embedded control in motor-control, industrial, and metering systems. The device combines a compact 16-bit core with 96K x 8 flash memory in a surface-mount package suitable for space-constrained equipment.

An RL78 microcontroller is a low-power embedded processing platform used to execute control logic, acquire sensor data, operate communication peripherals, and manage actuators. The RL78/G14 family belongs to the broader microcontroller hierarchy, combining efficient instruction execution, integrated mixed-signal resources, and energy-conscious operation for battery-powered and always-on industrial products. It is intended for applications that need more control capability than a basic timer or logic device without moving to a higher-power application processor.

The R5F104MFAFB#30 offers a 32 MHz clock, 16-bit processing architecture, 96 KB of flash memory, and an operating temperature range of -40°C to +85°C. Its 80-LQFP package provides a conventional leaded surface-mount footprint with enough pins for external interfaces and mixed-signal connections. The -40°C to +85°C range supports industrial equipment, environmental measurement instruments, motor controllers, and commercial products operating across extended temperatures.

Renesas positions this RL78/G14 device as a low-power, high-function general-purpose MCU for motor control, industrial systems, and metering applications. The 96 KB flash capacity gives embedded software room for control algorithms, calibration tables, communication protocols, and diagnostic functions. Its 32 MHz operating rate provides additional timing margin for pulse sampling, communication handling, and supervisory tasks while retaining the low-power orientation of the RL78 family.

Typical implementations include brushless motor controllers, industrial sensor nodes, utility and energy meters, compact instrumentation, and low-power embedded control boards. In a motor-control design, the MCU can coordinate input capture, timer-based commutation, fault monitoring, and communication with a host controller. In metering applications, it can combine acquisition, display control, data processing, and low-power standby operation within one integrated device.

PCB planning should account for all 80 package leads, exposed thermal requirements, decoupling near the supply pins, and clean return paths for sensing and communication signals. The 12 x 12 mm LQFP footprint is larger than a compact leadless package but provides generous routing access and inspection visibility during assembly. Firmware and peripheral configuration should be checked against the manufacturer's pin-description table before assigning board functions to the pins.

This product page combines the manufacturer's device information with package details, application guidance, sourcing parameters, and design-focused considerations. It supports engineers evaluating whether the R5F104MFAFB#30's memory capacity, clock rate, temperature range, and 80-LQFP footprint fit a motor-control, industrial, or metering design.

Alternatives de remplacement direct pour R5F104MFAFB#30 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

R5F104PFAFB#30

✅ Remplacement direct
📦 80-LFQFP (12 x 12 mm)
Uses the P-family ordering code rather than the target M code; verify device-specific memory, peripheral, and pin multiplexing differences against the manufacturer ordering table.

📋 Alternative de référence (hors catalogue)

R5F104PKAFB#30

✅ Remplacement direct
📦 80-LFQFP (12 x 12 mm)
Uses the PK-family ordering code; verify package-specific temperature, peripheral, and firmware compatibility because it is not the exact M-series configuration.

📋 Alternative de référence (hors catalogue)

R5F104LJAFB#30

✅ Remplacement direct
📦 80-LFQFP (12 x 12 mm)
Uses the LJ-family ordering code and requires verification of memory capacity, clock features, temperature grade, and peripheral assignments before replacement.

📋 Alternative de référence (hors catalogue)

R5F104MFAFB#30 Valeurs maximales et caractéristiques électriques

Product Type 16-bit microcontroller
Product Family RL78/G14
Maximum CPU Frequency 32 MHz
Flash Memory Capacity 96 KB
Flash Memory Organization 96K x 8 bits
Boîtier 80-LQFP, 12 x 12 mm
Plage de température de fonctionnement -40°C to +85°C
Type de montage Surface mount
Core Architecture 16-bit RL78 CPU

Guide de configuration des broches du R5F104MFAFB#30 80-lqfp, 12 x 12 mm

Configuration des broches du R5F104MFAFB#30 (boîtier 80-lqfp, 12 x 12 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 80-lqfp, 12 x 12 mm pour le R5F104MFAFB#30

Aucune donnée de brochage détaillée disponible pour R5F104MFAFB#30.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

R5F104MFAFB#30 convient pour 6 applications: Industrial Motor Control, Smart Energy Metering, Industrial Sensor Node, Compact Instrumentation, Low-Power Control Board, Metering and Pump Controller.

🏭

Industrial Motor Control

The R5F104MFAFB#30 fits compact motor-control systems that require a 32 MHz 16-bit processor and 96 KB of flash without moving to a larger application processor. Its control software can combine timer-based sequencing, input capture, fault handling, sensor conditioning, and communications while maintaining the low-power positioning of the RL78/G14 family. The 80-LQFP footprint provides ample routing access for external drivers, sensors, and protection circuits. Before finalizing a motor design, verify the required timer channels, analog inputs, operating voltage, and PWM resources against the manufacturer peripheral documentation.

⚡

Smart Energy Metering

The R5F104MFAFB#30 is appropriate for metering equipment because its 96 KB flash can hold acquisition routines, calibration data, communications protocols, and measurement algorithms. The 32 MHz 16-bit core provides timing margin for processing sensor readings and maintaining metering-system responsiveness, while the -40°C to +85°C range suits many industrial environments. A meter implementation can use the MCU for signal conditioning, data validation, local display control, and communication. Confirm ADC resolution, conversion timing, accuracy requirements, and interface availability before selecting it for a specific metering architecture.

🧩

Industrial Sensor Node

The R5F104MFAFB#30 can serve as the central processor in an industrial sensor node that combines periodic measurements, local filtering, diagnostics, and network communication. Its 32 MHz operating rate supports timely sampling and protocol handling, while 96 KB of flash provides room for configuration, logging, and application firmware. The RL78/G14 family's low-power orientation also benefits nodes that spend significant time between measurements or using energy-limited supply arrangements. The engineer should confirm the required analog channels, serial interfaces, sleep modes, and wake-up sources in the RL78/G14 documentation before layout release.

🔧

Compact Instrumentation

The R5F104MFAFB#30 is well matched to compact industrial instrumentation where a 32-bit-class performance level is unnecessary but 16-bit control, 96 KB of flash, and a 12 x 12 mm LQFP footprint are useful. The processor can coordinate analog measurement, calibration, front-panel control, data logging, and service communications in one device. The leaded 80-LQFP package also simplifies routing and visual inspection compared with a dense leadless package. Validate the analog signal chain, required communication channels, display interface, and supply range before assigning all measurement and control functions to this MCU.

🖥️

Low-Power Control Board

The R5F104MFAFB#30 can anchor a low-power embedded control board that performs supervisory functions, sequences external equipment, and handles local diagnostics. Its 32 MHz 16-bit architecture provides sufficient throughput for moderate control tasks, while the RL78/G14 family's power-conscious design is useful in systems that spend substantial time in standby or periodic operation. The 96 KB flash capacity supports structured firmware, parameter storage, and communication stacks. Check the exact standby current, wake-up timing, operating voltage, and peripheral configuration because those values determine whether the device meets a battery- or energy-limited design target.

🌐

Metering and Pump Controller

The R5F104MFAFB#30 can be used in metering and pump-control equipment that must combine measurement with actuator supervision. A 32 MHz clock supports responsive control and diagnostic routines, while 96 KB of flash accommodates operating parameters, calibration coefficients, event logs, and communication protocols. Its -40°C to +85°C operating range supports industrial equipment where moderate temperature variation is expected. For pump applications, review motor-drive topology, protection behavior, input filtering, and isolation requirements separately from the MCU selection. The MCU should be positioned as the supervisory and measurement controller rather than as a substitute for external power-stage components.

What design considerations matter when using R5F104MFAFB#30?
The main design checks are supply decoupling, clock stability, reset behavior, thermal performance, and exact pin assignment. Place input and output capacitors according to the manufacturer reference configuration, route clock signals away from switching nodes, and maintain an uninterrupted ground plane beneath the device where practical. Also verify the operating voltage, peripheral limits, and programming connections against the technical documentation before fabrication.

Données de référence d'ingénierie pour R5F104MFAFB#30 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the R5F104MFAFB#30 when the design requires a 32 MHz, 16-bit RL78/G14 controller with 96 KB of flash, an 80-LQFP 12 x 12 mm footprint, and operation from -40°C to +85°C. It is particularly suitable for motor-control, industrial, instrumentation, and metering products where compact software and control resources are needed without a larger application processor. The same-family part R5F104PFAFB appears in cross-reference results, but it should not be treated as a drop-in substitute until its flash capacity, pinout, and peripheral configuration are verified. A functional alternative may use the same 80-LQFP footprint, but true interchangeability requires matching pin assignments, supply voltage, clock behavior, timers, analog resources, interrupts, and programming support. For the lowest design risk, use the exact R5F104MFAFB#30 ordering code when pin-compatible substitution is not a formal requirement.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Renesas Electronics
Package 80-LQFP, 12 x 12 mm
CPU Architecture 16-bit RL78
Maximum CPU Frequency 32 MHz
Flash Memory 96 KB
Flash Organization 96K x 8 bits
Product Family RL78/G14
Operating Temperature Range -40°C to +85°C
Mounting Type Surface mount
Primary Applications Motor control, industrial systems, and metering

Principaux différenciateurs

  • Balanced 16-bit control performance and memory density (vs No confirmed drop-in alternative)
  • Extended commercial-industrial temperature coverage (vs No confirmed drop-in alternative)
  • Direct Renesas RL78/G14 application positioning (vs No confirmed drop-in alternative)

Notes de conception

Use the Renesas package drawing and pin-description table to assign all 80 leads before routing. Place all required decoupling capacitors close to their supply pins, provide a continuous ground reference, and keep clock and sensitive measurement traces away from switching-node copper. The 12 x 12 mm LQFP footprint requires adequate lead clearance and should be checked against the board fabrication and assembly rules.

Calculate the MCU supply requirement from the operating voltage, active current, peripheral loading, and temperature-dependent limits before designing the regulator and decoupling network. Confirm the maximum operating voltage in the electrical characteristics because the #30 ordering code denotes a particular temperature configuration rather than a separate voltage rating. Use the manufacturer reference circuit and component values as the basis for the final power network.

Do not treat every RL78/G14 ordering code as interchangeable. Check flash capacity, package dimensions, pin count, temperature range, and peripheral configuration for each candidate. In particular, confirm the exact suffix, exposed thermal features, programming interface, and pin names in the package drawing. A family-level match alone is insufficient to establish drop-in compatibility.

For motor-control or metering designs, partition analog inputs, digital control signals, communications, and power routing to reduce coupling. Use a stable ground plane, keep sensor traces short, and isolate switching nodes from the MCU. Where a sensor or ADC front end requires filtering, calculate the required resistor and capacitor values from the signal bandwidth and the manufacturer's application guidance rather than copying values from an unrelated design.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The component is an industrial-temperature microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is shown in the manufacturer product information. AEC-Q100 is marked not applicable because this ordering code is not identified as an automotive-qualified variant.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

R5F104MFAFB#30 datasheet R5F104MFAFB#30 pinout R5F104MFAFB#30 datasheet pdf R5F104MFAFB#30 specifications R5F104MFAFB#30 equivalent R5F104MFAFB#30 replacement R5F104MFAFB#30 cross reference Renesas R5F104MFAFB#30 R5F104MFAFB#30 80-LQFP pinout R5F104MFAFB#30 motor control R5F104MFAFB#30 industrial metering R5F104MFAFB#30 price R5F104MFAFB#30 stock

Composants & termes associés

Renesas Electronics R5F104MFAFB#30 R5F104MFAFB R5F104PFAFB RL78/G14 RL78 16-bit microcontroller embedded microcontroller microcontroller semiconductor 32 MHz 96 KB flash memory 80-LQFP LQFP package family surface mount SMD motor control industrial control metering embedded control operating temperature range general-purpose MCU
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ