R5F104MFAFB#30 - 32MHz 16-Bit RL78/G14 MCU | Renesas
MPN: R5F104MFAFB#30 ✓ فعالR5F104MFAFB#30 جائزہ
An RL78 microcontroller is a low-power embedded processing platform used to execute control logic, acquire sensor data, operate communication peripherals, and manage actuators. The RL78/G14 family belongs to the broader microcontroller hierarchy, combining efficient instruction execution, integrated mixed-signal resources, and energy-conscious operation for battery-powered and always-on industrial products. It is intended for applications that need more control capability than a basic timer or logic device without moving to a higher-power application processor.
The R5F104MFAFB#30 offers a 32 MHz clock, 16-bit processing architecture, 96 KB of flash memory, and an operating temperature range of -40°C to +85°C. Its 80-LQFP package provides a conventional leaded surface-mount footprint with enough pins for external interfaces and mixed-signal connections. The -40°C to +85°C range supports industrial equipment, environmental measurement instruments, motor controllers, and commercial products operating across extended temperatures.
Renesas positions this RL78/G14 device as a low-power, high-function general-purpose MCU for motor control, industrial systems, and metering applications. The 96 KB flash capacity gives embedded software room for control algorithms, calibration tables, communication protocols, and diagnostic functions. Its 32 MHz operating rate provides additional timing margin for pulse sampling, communication handling, and supervisory tasks while retaining the low-power orientation of the RL78 family.
Typical implementations include brushless motor controllers, industrial sensor nodes, utility and energy meters, compact instrumentation, and low-power embedded control boards. In a motor-control design, the MCU can coordinate input capture, timer-based commutation, fault monitoring, and communication with a host controller. In metering applications, it can combine acquisition, display control, data processing, and low-power standby operation within one integrated device.
PCB planning should account for all 80 package leads, exposed thermal requirements, decoupling near the supply pins, and clean return paths for sensing and communication signals. The 12 x 12 mm LQFP footprint is larger than a compact leadless package but provides generous routing access and inspection visibility during assembly. Firmware and peripheral configuration should be checked against the manufacturer's pin-description table before assigning board functions to the pins.
This product page combines the manufacturer's device information with package details, application guidance, sourcing parameters, and design-focused considerations. It supports engineers evaluating whether the R5F104MFAFB#30's memory capacity, clock rate, temperature range, and 80-LQFP footprint fit a motor-control, industrial, or metering design.
کے لیے ڈراپ اِن متبادل R5F104MFAFB#30 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
R5F104PFAFB#30
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F104PKAFB#30
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F104LJAFB#30
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F104MFAFB#30 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 16-bit microcontroller |
| Product Family | RL78/G14 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory Capacity | 96 KB |
| Flash Memory Organization | 96K x 8 bits |
| پیکیج | 80-LQFP, 12 x 12 mm |
| آپریٹنگ درجہ حرارت رینج | -40°C to +85°C |
| ماؤنٹنگ ٹائپ | Surface mount |
| Core Architecture | 16-bit RL78 CPU |
R5F104MFAFB#30 80-lqfp, 12 x 12 mm پن کنفیگریشن گائیڈ
R5F104MFAFB#30 (80-lqfp, 12 x 12 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں R5F104MFAFB#30.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
R5F104MFAFB#30 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Motor Control, Smart Energy Metering, Industrial Sensor Node, Compact Instrumentation, Low-Power Control Board, Metering and Pump Controller.
Industrial Motor Control
The R5F104MFAFB#30 fits compact motor-control systems that require a 32 MHz 16-bit processor and 96 KB of flash without moving to a larger application processor. Its control software can combine timer-based sequencing, input capture, fault handling, sensor conditioning, and communications while maintaining the low-power positioning of the RL78/G14 family. The 80-LQFP footprint provides ample routing access for external drivers, sensors, and protection circuits. Before finalizing a motor design, verify the required timer channels, analog inputs, operating voltage, and PWM resources against the manufacturer peripheral documentation.
تجویز کردہ
Smart Energy Metering
The R5F104MFAFB#30 is appropriate for metering equipment because its 96 KB flash can hold acquisition routines, calibration data, communications protocols, and measurement algorithms. The 32 MHz 16-bit core provides timing margin for processing sensor readings and maintaining metering-system responsiveness, while the -40°C to +85°C range suits many industrial environments. A meter implementation can use the MCU for signal conditioning, data validation, local display control, and communication. Confirm ADC resolution, conversion timing, accuracy requirements, and interface availability before selecting it for a specific metering architecture.
تجویز کردہ
Industrial Sensor Node
The R5F104MFAFB#30 can serve as the central processor in an industrial sensor node that combines periodic measurements, local filtering, diagnostics, and network communication. Its 32 MHz operating rate supports timely sampling and protocol handling, while 96 KB of flash provides room for configuration, logging, and application firmware. The RL78/G14 family's low-power orientation also benefits nodes that spend significant time between measurements or using energy-limited supply arrangements. The engineer should confirm the required analog channels, serial interfaces, sleep modes, and wake-up sources in the RL78/G14 documentation before layout release.
تجویز کردہ
Compact Instrumentation
The R5F104MFAFB#30 is well matched to compact industrial instrumentation where a 32-bit-class performance level is unnecessary but 16-bit control, 96 KB of flash, and a 12 x 12 mm LQFP footprint are useful. The processor can coordinate analog measurement, calibration, front-panel control, data logging, and service communications in one device. The leaded 80-LQFP package also simplifies routing and visual inspection compared with a dense leadless package. Validate the analog signal chain, required communication channels, display interface, and supply range before assigning all measurement and control functions to this MCU.
تجویز کردہ
Low-Power Control Board
The R5F104MFAFB#30 can anchor a low-power embedded control board that performs supervisory functions, sequences external equipment, and handles local diagnostics. Its 32 MHz 16-bit architecture provides sufficient throughput for moderate control tasks, while the RL78/G14 family's power-conscious design is useful in systems that spend substantial time in standby or periodic operation. The 96 KB flash capacity supports structured firmware, parameter storage, and communication stacks. Check the exact standby current, wake-up timing, operating voltage, and peripheral configuration because those values determine whether the device meets a battery- or energy-limited design target.
تجویز کردہ
Metering and Pump Controller
The R5F104MFAFB#30 can be used in metering and pump-control equipment that must combine measurement with actuator supervision. A 32 MHz clock supports responsive control and diagnostic routines, while 96 KB of flash accommodates operating parameters, calibration coefficients, event logs, and communication protocols. Its -40°C to +85°C operating range supports industrial equipment where moderate temperature variation is expected. For pump applications, review motor-drive topology, protection behavior, input filtering, and isolation requirements separately from the MCU selection. The MCU should be positioned as the supervisory and measurement controller rather than as a substitute for external power-stage components.
تجویز کردہ
کے لیے انجینئرنگ ریفرنس ڈیٹا R5F104MFAFB#30 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Renesas Electronics |
| Package | 80-LQFP, 12 x 12 mm |
| CPU Architecture | 16-bit RL78 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 96 KB |
| Flash Organization | 96K x 8 bits |
| Product Family | RL78/G14 |
| Operating Temperature Range | -40°C to +85°C |
| Mounting Type | Surface mount |
| Primary Applications | Motor control, industrial systems, and metering |
اہم امتیازی خصوصیات
- Balanced 16-bit control performance and memory density (بمقابلہNo confirmed drop-in alternative)
- Extended commercial-industrial temperature coverage (بمقابلہNo confirmed drop-in alternative)
- Direct Renesas RL78/G14 application positioning (بمقابلہNo confirmed drop-in alternative)
ڈیزائن نوٹس
Use the Renesas package drawing and pin-description table to assign all 80 leads before routing. Place all required decoupling capacitors close to their supply pins, provide a continuous ground reference, and keep clock and sensitive measurement traces away from switching-node copper. The 12 x 12 mm LQFP footprint requires adequate lead clearance and should be checked against the board fabrication and assembly rules.
Calculate the MCU supply requirement from the operating voltage, active current, peripheral loading, and temperature-dependent limits before designing the regulator and decoupling network. Confirm the maximum operating voltage in the electrical characteristics because the #30 ordering code denotes a particular temperature configuration rather than a separate voltage rating. Use the manufacturer reference circuit and component values as the basis for the final power network.
Do not treat every RL78/G14 ordering code as interchangeable. Check flash capacity, package dimensions, pin count, temperature range, and peripheral configuration for each candidate. In particular, confirm the exact suffix, exposed thermal features, programming interface, and pin names in the package drawing. A family-level match alone is insufficient to establish drop-in compatibility.
For motor-control or metering designs, partition analog inputs, digital control signals, communications, and power routing to reduce coupling. Use a stable ground plane, keep sensor traces short, and isolate switching nodes from the MCU. Where a sensor or ADC front end requires filtering, calculate the required resistor and capacitor values from the signal bandwidth and the manufacturer's application guidance rather than copying values from an unrelated design.
تعمیل کی معلومات
The component is an industrial-temperature microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is shown in the manufacturer product information. AEC-Q100 is marked not applicable because this ordering code is not identified as an automotive-qualified variant.