Renesas Electronics

R5F104MLAFB#30 - 32MHz 512KB 16-Bit MCU | Renesas

Référence : R5F104MLAFB#30 ✓ Actif
1.6 V to 5.5 V Vdss 66 uA/MHz Id 80-LQFP (12 x 12 mm) Package 32 MHz Speed 512 KB Memory
MOQ : 1 |

R5F104MLAFB#30 Présentation

Renesas Electronics R5F104MLAFB#30 is an RL78/G14 16-bit CISC microcontroller rated for operation up to 32 MHz, with 512 KB of flash memory and an 80-LQFP package measuring 12 x 12 mm. The device combines a 16-bit architecture, a 512K x 8 flash configuration, and low-power operation characteristics for embedded motor-control, industrial, and metering designs.

An RL78 microcontroller is a general-purpose embedded-control device in Renesas' low-power MCU portfolio. Its system role combines processor execution, flash-backed firmware storage, analog and digital I/O, timing resources, and communication peripherals on one integrated device. The RL78/G14 family is positioned for applications where compact code, low standby consumption, and broad control connectivity are more important than a high-end graphics processor or a large RAM footprint.

The headline characteristics of the R5F104MLAFB#30 are its 32 MHz maximum operating frequency, 512 KB flash memory, and 16-bit instruction set. The RL78/G14 platform is described as delivering up to 44 DMIPS at 32 MHz, while its normal operating current is characterized at 66 uA/MHz. Operation with only the real-time clock and low-voltage detector enabled is characterized at 0.60 uA, providing useful context for low-power product design.

The MCU supports a 1.6 V to 5.5 V operating range, allowing it to operate directly from common low-voltage rails. Its 512 KB code-flash capacity provides room for substantially more application firmware than a small entry-level MCU, while the 80-LQFP package exposes a comparatively generous pin count for motor-control signals, analog inputs, communications, and external peripherals.

Typical uses include motor controllers, industrial equipment, electronic meters, metering systems, and compact embedded-control products. The RL78/G14 family is particularly relevant when a design needs low-power operation, a broad set of mixed-signal I/O, and deterministic control performance from a 16-bit processor. Its 32 MHz clock also provides additional control and communications bandwidth compared with slower general-purpose 8-bit designs.

For a new PCB, route the device's supply and ground pins according to the manufacturer datasheet, keep decoupling close to the relevant supply pins, and reserve programming and debug access for manufacturing and field maintenance. Confirm the complete 80-pin assignment, peripheral multiplexing, and package dimensions before releasing the schematic or PCB footprint.

This product page combines the exact R5F104MLAFB#30 identity, package information, operating characteristics, documented application focus, comparison data, and practical integration guidance. It is structured to help engineers identify the correct RL78/G14 device and plan a pin-compatible, low-power embedded-control design without relying on a generic family description.

Alternatives de remplacement direct pour R5F104MLAFB#30 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

R5F104MLGFB#30

✅ Remplacement direct
📦 80-LQFP (12 x 12 mm)
CPU frequency differs by 0 MHz, flash capacity by 0 KB, and core width by 0 bits; the exact device-specific feature difference is not stated in the comparison listing

📋 Alternative de référence (hors catalogue)

R5F104MLAFB#30 Valeurs maximales et caractéristiques électriques

Product Type 16-bit RL78/G14 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 512 KB
Flash Organization 512K x 8 bits
CPU Architecture 16-bit CISC
Operating Voltage Range 1.6 V to 5.5 V
Maximum Performance 44 DMIPS at 32 MHz
Operating Current 66 uA/MHz
RTC and LVD Operating Current 0.60 uA
Boîtier 80-LQFP (12 x 12 mm)
Plage de température de fonctionnement -40 C to +85 C
Type de montage Surface mount
Device Category Low-power general-purpose microcontroller
Application Focus Motor control, industrial, and metering applications
Code Flash Capacity 16 KB to 512 KB across the RL78/G14 family
Statut RoHS Compliant

Guide de configuration des broches du R5F104MLAFB#30 80-lqfp (12 x 12 mm)

Configuration des broches du R5F104MLAFB#30 (boîtier 80-lqfp (12 x 12 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 80-lqfp (12 x 12 mm) pour le R5F104MLAFB#30

Aucune donnée de brochage détaillée disponible pour R5F104MLAFB#30.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

R5F104MLAFB#30 convient pour 6 applications: Industrial Motor Controllers, Electric Metering Systems, Low-Power Sensor Nodes, General-Purpose Embedded Control, Lighting and Analog Control Systems, Battery-Powered Instrumentation.

🏭

Industrial Motor Controllers

The R5F104MLAFB#30 fits compact industrial motor controllers because it combines a 32 MHz 16-bit CISC processor with 512 KB of flash for control code, parameters, and communication handlers. The RL78/G14 platform operates from 1.6 V to 5.5 V and is characterized at 66 uA/MHz, helping balance control-loop performance with power consumption. Its 80-LQFP package provides numerous pins for motor-drive signals, sensors, and communications. Before schematic capture, verify timer, PWM, ADC, comparator, and fault-input assignments against the exact package pin table.

🔧

Electric Metering Systems

The R5F104MLAFB#30 is well suited to metering systems that must process measurements, maintain calibration data, and handle display or communications functions within one device. Its 512 KB code flash provides substantially more firmware room than small RL78 variants, while the 32 MHz 16-bit core supports responsive measurement handling. The 1.6 V minimum operating voltage allows integration with low-voltage sensing and energy-management circuits. Confirm ADC resolution, timer channels, serial interfaces, and calibration retention in the Renesas datasheet for the selected configuration.

🧩

Low-Power Sensor Nodes

The R5F104MLAFB#30 can support low-power sensor nodes where a compact 16-bit control core, local processing, and limited standby consumption are important. The RL78/G14 family operates at 66 uA/MHz and can be restricted to 0.60 uA when only the RTC and low-voltage detector remain active. Its 512 KB flash allows local buffering, event processing, and protocol handling without a separate memory device. Use the lowest acceptable operating mode, disable unused peripherals, and calculate the complete average-current budget from the final sensor duty cycle.

🔧

General-Purpose Embedded Control

The R5F104MLAFB#30 provides a practical platform for general-purpose embedded control with a 32 MHz clock, 16-bit architecture, and 512 KB code flash. That combination is useful when a product needs moderate computation, several mixed-signal interfaces, and field-reconfigurable firmware without moving to a more complex processor. The 80-LQFP package offers more I/O than a small microcontroller package while remaining manageable for automated assembly. Partition the firmware by timing-critical control and supervisory functions, and verify every peripheral multiplex option before PCB release.

💡

Lighting and Analog Control Systems

The R5F104MLAFB#30 can serve in lighting and analog-control systems that need deterministic low-level sequencing, sensor monitoring, and flexible firmware. Its 32 MHz 16-bit core supplies useful processing capacity, while the 1.6 V to 5.5 V range permits direct integration with low-voltage analog and power-control circuitry. The family includes analog-rich functionality, but exact comparator, ADC, timer, and PWM resources must be confirmed for the selected 80-pin variant. Keep sensitive analog routing away from switching nodes and provide local decoupling according to the manufacturer's layout guidance.

⚡

Battery-Powered Instrumentation

The R5F104MLAFB#30 is applicable to battery-powered instrumentation where both processing capacity and low-power modes matter. Its 512 KB flash can store measurement procedures, calibration tables, logging logic, and communication firmware, while the 32 MHz 16-bit CPU can perform real-time signal conditioning and control. The RL78/G14 family's 0.60 uA RTC-and-LVD operating condition can support low-duty-cycle products that wake only for scheduled measurements. Determine the actual energy budget using wake duration, analog-block use, communications activity, regulator efficiency, and the selected operating mode.

Récapitulatif des produits recommandés

R5F104MLAFB#30 Renesas Electronics Utilisé dans : Industrial Motor Controllers, Electric Metering Systems, Low-Power Sensor Nodes, General-Purpose Embedded Control, Lighting and Analog Control Systems, Battery-Powered Instrumentation R5F104MLGFB#30 Closest documented same-family comparison Utilisé dans : Industrial Motor Controllers, Electric Metering Systems, Low-Power Sensor Nodes, General-Purpose Embedded Control, Lighting and Analog Control Systems, Battery-Powered Instrumentation
What is the R5F104MLAFB#30?
The R5F104MLAFB#30 is a Renesas Electronics RL78/G14 low-power 16-bit microcontroller with a 32 MHz maximum operating frequency, 512 KB of flash memory, and an 80-LQFP package. According to the Renesas RL78/G14 datasheet, the family combines a 16-bit CISC architecture, a 1.6 V to 5.5 V operating range, and up to 44 DMIPS at 32 MHz. It is intended for general-purpose embedded products, including motor-control, industrial, and metering equipment.
What are the key specifications of R5F104MLAFB#30 that engineers should know?
The R5F104MLAFB#30 provides a 32 MHz operating frequency, 512 KB flash organized as 512K x 8, a 16-bit CISC architecture, and an 80-LQFP package measuring 12 x 12 mm. The Renesas RL78/G14 datasheet identifies a 1.6 V to 5.5 V operating range, up to 44 DMIPS at 32 MHz, 66 uA/MHz normal operating current, and 0.60 uA operation when only the RTC and LVD remain active. These parameters position it for compact, low-power industrial and metering designs.
Where can I download the R5F104MLAFB#30 datasheet PDF?
The official Renesas RL78/G14 datasheet is available through the Renesas document page at https://www.renesas.com/en/document/dst/rl78g14-data-sheet. Use the datasheet to verify the exact 80-pin assignments, peripheral functions, electrical limits, programming procedure, and package dimensions before designing the PCB. The R5F104MLAFB#30 manufacturer product page also provides the device-specific ordering information and identifies its intended motor-control, industrial, and metering applications.
Where can I find the R5F104MLAFB#30 pinout?
The R5F104MLAFB#30 pinout is defined in the pin-description section of the official Renesas RL78/G14 datasheet and the package drawing on the R5F104MLAFB#30 product page. The device uses an 80-LQFP package with 80 numbered perimeter pins. Use the manufacturer package drawing to map every port, power, ground, reset, clock, and programming signal before assigning PCB tracks; pin functions can also vary with peripheral configuration and operating mode.
What is the operating voltage of R5F104MLAFB#30?
The R5F104MLAFB#30 operates from 1.6 V to 5.5 V. According to the Renesas RL78/G14 datasheet, this voltage range supports low-voltage embedded systems and allows the MCU to share rails with common industrial, metering, and motor-control circuitry. The range applies to the specified device conditions; designers should still check individual peripheral limits, regulator tolerances, startup behavior, and maximum supply voltage in the detailed electrical-characteristics table.
How much flash memory does the R5F104MLAFB#30 contain?
The R5F104MLAFB#30 contains 512 KB of code flash, identified by distributor specifications as 512K x 8. According to the Renesas RL78/G14 datasheet, the RL78/G14 family covers code-flash capacities from 16 KB through 512 KB, making this device the high-code-capacity member of the range. The larger flash area supports more complex control algorithms, communication stacks, parameter storage, and field-update functions than the family's smaller-memory variants.
Is the R5F104MLAFB#30 suitable for low-power applications?
Yes, the R5F104MLAFB#30 is suitable for low-power applications because the RL78/G14 platform operates at 66 uA/MHz and can operate at 0.60 uA with only the RTC and low-voltage detector enabled. The Renesas RL78/G14 datasheet identifies these figures as family characteristics. Actual product consumption depends on clock settings, active peripherals, flash operation, analog blocks, I/O states, and the power-management mode selected by the application firmware.
What is the CPU performance of the R5F104MLAFB#30?
The R5F104MLAFB#30 executes a 16-bit CISC instruction set at up to 32 MHz and is rated for up to 44 DMIPS in the RL78/G14 family. The 32 MHz operating frequency provides useful timing margin for motor-control loops, digital I/O handling, communications protocols, and supervisory logic. Final control-loop performance should be calculated with the exact peripheral configuration, interrupt latency, memory-wait conditions, and firmware behavior rather than from the headline DMIPS rating alone.
What can replace the R5F104MLAFB#30?
The R5F104MLAFB#30 is an RL78/G14 member, and the closest identified comparison is R5F104MLGFB#30, which shares the 32 MHz, 512 KB flash, and 16-bit MCU ratings in the documented product comparison. Pin compatibility and the precise differences between the A and G device variants should still be checked against the Renesas datasheets before substitution. Use the Request a Quote form on this page when sourcing a replacement and request a formal compatibility review for the complete design.
Is the R5F104MLAFB#30 pin compatible with R5F104MLGFB#30?
The R5F104MLGFB#30 is the closest identified same-family alternative to the R5F104MLAFB#30, with matching 32 MHz operation, 512 KB flash, and 16-bit MCU ratings in the product comparison. Before treating it as a drop-in replacement, compare the manufacturer pin tables, peripheral assignments, electrical characteristics, and operating-temperature requirements for both exact orderable MPNs. A footprint match alone does not establish that every peripheral function or software setting is interchangeable.
When should I choose the R5F104MLAFB#30 over another RL78/G14 device?
Choose the R5F104MLAFB#30 when the design benefits from 512 KB of code flash, 32 MHz execution, a 16-bit CPU, and an 80-LQFP footprint. The Renesas RL78/G14 datasheet highlights the family's low-power operation and 1.6 V to 5.5 V range. Select a smaller-memory family member when code capacity is unnecessary, or a different package when board area is more restrictive; compare peripheral availability and pin assignments before making the choice.
Is the R5F104MLAFB#30 suitable for motor control and metering products?
Yes, Renesas identifies the R5F104MLAFB#30 for motor-control, industrial, and metering applications. Its 32 MHz 16-bit processor, 512 KB flash, and low-power operating characteristics provide a useful combination for embedded controllers that execute control algorithms, monitor analog or digital inputs, and manage communications. The completed design must still verify timer, ADC, comparator, PWM, communication, and interrupt assignments in the RL78/G14 pin and peripheral tables.
Where can I buy R5F104MLAFB#30 online?
The R5F104MLAFB#30 can be requested through XAIPART's Request a Quote form on this page, where the exact ordering code R5F104MLAFB#30 should be entered. Current stock, lot allocation, lead time, and order confirmation should be handled through the quotation workflow rather than an embedded static price. Before releasing a purchase order, confirm the 80-LQFP package, temperature range, firmware qualification, and delivery conditions against the approved bill of materials.
What is the price of R5F104MLAFB#30?
The current commercial price for R5F104MLAFB#30 should be obtained through the Request a Quote form on this page. The quote should identify the exact R5F104MLAFB#30 orderable MPN, quantity, package form, shipment destination, and requested lead time. This avoids ambiguity between the standard R5F104MLAFB#30 designation and other temperature, packing, or lifecycle-related suffixes that may have different supply conditions.
What is the lead time and stock status for R5F104MLAFB#30?
The current lead time, available stock, and minimum order quantity for R5F104MLAFB#30 should be confirmed through the Request a Quote form on this page. The Renesas product page identifies the device for motor-control, industrial, and metering applications, but the active order status should be matched to the requested quantity and delivery schedule. Include forecast demand in the request so that allocation and production planning can be reviewed with the quotation.
What tooling and design checks are needed for an R5F104MLAFB#30 design?
The R5F104MLAFB#30 design should be checked against the Renesas RL78/G14 datasheet for supply routing, reset, clock, programming, boot configuration, peripheral multiplexing, and all 80 LQFP pin assignments. The official part detail page is https://www.renesas.com/en/products/rl78-g14/part-details/r5f104mlafb-30. Because firmware, peripheral configuration, and electrical timing can affect behavior, use the programming specification and application notes in addition to the basic datasheet before production release.

Données de référence d'ingénierie pour R5F104MLAFB#30 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the R5F104MLAFB#30 when the design requires a low-power 16-bit MCU with a 32 MHz clock, 512 KB of code flash, and an 80-LQFP package. It is particularly attractive for motor controllers, industrial equipment, metering products, and low-duty-cycle instrumentation where the RL78/G14 family's 1.6 V to 5.5 V range and low-power modes are important. The closest identified family comparison is R5F104MLGFB#30, which has matching headline CPU, architecture, and memory ratings. Select that candidate only after comparing exact pin tables, peripheral assignments, electrical limits, temperature requirements, and software support. Use a smaller-memory RL78 device when 512 KB is unnecessary, or consider another package when the 12 x 12 mm LQFP footprint is too large. Before release, complete schematic, firmware, timing, thermal, and manufacturing validation using the exact orderable MPN.

Comparaison avec les alternatives

Paramètre Ce produit R5F104MLGFB#30
Brand Renesas Electronics Renesas Electronics
Package 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm)
Product Family RL78/G14 RL78/G14
CPU Architecture 16-bit CISC 16-bit CISC
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 512 KB (512K x 8) 512 KB

Principaux différenciateurs

  • Matches the closest documented family candidate on headline compute and memory ratings (vs R5F104MLGFB#30)
  • Provides ample code storage for embedded-control firmware (vs R5F104MLGFB#30)
  • Targets power-conscious motor-control and metering products (vs R5F104MLGFB#30)

Notes de conception

Design the supply network for the full 1.6 V to 5.5 V operating range, including startup, brownout behavior, and the current required by active peripherals. Place the required bypass capacitors adjacent to the appropriate VDD and VSS pins, keep their grounding paths short, and avoid routing return current beneath noisy switching nodes. The RL78/G14 family can operate at 66 uA/MHz, but the final average current also depends on flash execution, timer activity, analog blocks, I/O states, and sleep-mode entry conditions.

Use the Renesas 80-LQFP package drawing as the controlling source for land pattern, pin numbering, solder mask, and courtyard. Assign all 80 pins in the schematic and mark unused pins according to the device requirements rather than leaving them visually ambiguous. Preserve access to programming, reset, clock, and boot-mode signals for manufacturing and service. Confirm pin multiplexing before routing because several peripheral functions can share the same physical terminal.

Do not select the RL78/G14 purely by clock speed and flash capacity. Verify the exact peripheral mix, ADC and timer resources, communication channels, pin multiplexing, operating-temperature limits, and software support required by the product. The A and G orderable suffixes should not be treated as interchangeable solely because their headline CPU and flash ratings match. Review both exact-device datasheets and validate the firmware, clock settings, startup vector, and peripheral initialization sequence before production.

Separate analog inputs and low-level sensor signals from motor-switching nodes, high-current return paths, and digital clock traces. Use the shortest practical analog routes, a continuous ground reference, and local supply bypass near the MCU. For externally timed or high-speed signals, check the RL78/G14 peripheral input thresholds and pin multiplexing rather than assuming every port can operate at the maximum CPU frequency. Validate signal integrity with the final stack-up and loaded operating conditions.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The product listing identifies the R5F104MLAFB#30 as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was available.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

R5F104MLAFB#30 datasheet R5F104MLAFB#30 pinout R5F104MLAFB#30 datasheet pdf R5F104MLAFB#30 specifications R5F104MLAFB#30 price R5F104MLAFB#30 stock Renesas R5F104MLAFB#30 R5F104MLAFB#30 equivalent R5F104MLAFB#30 replacement R5F104MLAFB#30 vs R5F104MLGFB#30 R5F104MLAFB#30 footprint R5F104MLAFB#30 application circuit

Composants & termes associés

Renesas Electronics R5F104MLAFB#30 R5F104MLGFB#30 RL78 RL78/G14 16-bit microcontroller 16-bit CISC architecture embedded microcontroller general-purpose microcontroller low-power MCU microcontroller semiconductor 32 MHz 512 KB flash 80-LQFP LQFP package surface-mount package 1.6 V to 5.5 V 66 uA/MHz 0.60 uA 44 DMIPS motor control industrial control metering
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ