R5F104MLAFB#30 - 32MHz 512KB 16-Bit MCU | Renesas
MPN: R5F104MLAFB#30 ✓ सक्रियR5F104MLAFB#30 अवलोकन
An RL78 microcontroller is a general-purpose embedded-control device in Renesas' low-power MCU portfolio. Its system role combines processor execution, flash-backed firmware storage, analog and digital I/O, timing resources, and communication peripherals on one integrated device. The RL78/G14 family is positioned for applications where compact code, low standby consumption, and broad control connectivity are more important than a high-end graphics processor or a large RAM footprint.
The headline characteristics of the R5F104MLAFB#30 are its 32 MHz maximum operating frequency, 512 KB flash memory, and 16-bit instruction set. The RL78/G14 platform is described as delivering up to 44 DMIPS at 32 MHz, while its normal operating current is characterized at 66 uA/MHz. Operation with only the real-time clock and low-voltage detector enabled is characterized at 0.60 uA, providing useful context for low-power product design.
The MCU supports a 1.6 V to 5.5 V operating range, allowing it to operate directly from common low-voltage rails. Its 512 KB code-flash capacity provides room for substantially more application firmware than a small entry-level MCU, while the 80-LQFP package exposes a comparatively generous pin count for motor-control signals, analog inputs, communications, and external peripherals.
Typical uses include motor controllers, industrial equipment, electronic meters, metering systems, and compact embedded-control products. The RL78/G14 family is particularly relevant when a design needs low-power operation, a broad set of mixed-signal I/O, and deterministic control performance from a 16-bit processor. Its 32 MHz clock also provides additional control and communications bandwidth compared with slower general-purpose 8-bit designs.
For a new PCB, route the device's supply and ground pins according to the manufacturer datasheet, keep decoupling close to the relevant supply pins, and reserve programming and debug access for manufacturing and field maintenance. Confirm the complete 80-pin assignment, peripheral multiplexing, and package dimensions before releasing the schematic or PCB footprint.
This product page combines the exact R5F104MLAFB#30 identity, package information, operating characteristics, documented application focus, comparison data, and practical integration guidance. It is structured to help engineers identify the correct RL78/G14 device and plan a pin-compatible, low-power embedded-control design without relying on a generic family description.
के लिए ड्रॉप-इन विकल्प R5F104MLAFB#30 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
R5F104MLGFB#30
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
R5F104MLAFB#30 Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit RL78/G14 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| CPU Architecture | 16-bit CISC |
| Operating Voltage Range | 1.6 V to 5.5 V |
| Maximum Performance | 44 DMIPS at 32 MHz |
| Operating Current | 66 uA/MHz |
| RTC and LVD Operating Current | 0.60 uA |
| पैकेज | 80-LQFP (12 x 12 mm) |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C |
| माउंटिंग प्रकार | Surface mount |
| Device Category | Low-power general-purpose microcontroller |
| Application Focus | Motor control, industrial, and metering applications |
| Code Flash Capacity | 16 KB to 512 KB across the RL78/G14 family |
| RoHS स्थिति | Compliant |
R5F104MLAFB#30 80-lqfp (12 x 12 mm) पिन कॉन्फ़िगरेशन गाइड
R5F104MLAFB#30 (80-lqfp (12 x 12 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: R5F104MLAFB#30.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
R5F104MLAFB#30 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Motor Controllers, Electric Metering Systems, Low-Power Sensor Nodes, General-Purpose Embedded Control, Lighting and Analog Control Systems, Battery-Powered Instrumentation.
Industrial Motor Controllers
The R5F104MLAFB#30 fits compact industrial motor controllers because it combines a 32 MHz 16-bit CISC processor with 512 KB of flash for control code, parameters, and communication handlers. The RL78/G14 platform operates from 1.6 V to 5.5 V and is characterized at 66 uA/MHz, helping balance control-loop performance with power consumption. Its 80-LQFP package provides numerous pins for motor-drive signals, sensors, and communications. Before schematic capture, verify timer, PWM, ADC, comparator, and fault-input assignments against the exact package pin table.
अनुशंसित
Electric Metering Systems
The R5F104MLAFB#30 is well suited to metering systems that must process measurements, maintain calibration data, and handle display or communications functions within one device. Its 512 KB code flash provides substantially more firmware room than small RL78 variants, while the 32 MHz 16-bit core supports responsive measurement handling. The 1.6 V minimum operating voltage allows integration with low-voltage sensing and energy-management circuits. Confirm ADC resolution, timer channels, serial interfaces, and calibration retention in the Renesas datasheet for the selected configuration.
अनुशंसित
Low-Power Sensor Nodes
The R5F104MLAFB#30 can support low-power sensor nodes where a compact 16-bit control core, local processing, and limited standby consumption are important. The RL78/G14 family operates at 66 uA/MHz and can be restricted to 0.60 uA when only the RTC and low-voltage detector remain active. Its 512 KB flash allows local buffering, event processing, and protocol handling without a separate memory device. Use the lowest acceptable operating mode, disable unused peripherals, and calculate the complete average-current budget from the final sensor duty cycle.
अनुशंसित
General-Purpose Embedded Control
The R5F104MLAFB#30 provides a practical platform for general-purpose embedded control with a 32 MHz clock, 16-bit architecture, and 512 KB code flash. That combination is useful when a product needs moderate computation, several mixed-signal interfaces, and field-reconfigurable firmware without moving to a more complex processor. The 80-LQFP package offers more I/O than a small microcontroller package while remaining manageable for automated assembly. Partition the firmware by timing-critical control and supervisory functions, and verify every peripheral multiplex option before PCB release.
अनुशंसित
Lighting and Analog Control Systems
The R5F104MLAFB#30 can serve in lighting and analog-control systems that need deterministic low-level sequencing, sensor monitoring, and flexible firmware. Its 32 MHz 16-bit core supplies useful processing capacity, while the 1.6 V to 5.5 V range permits direct integration with low-voltage analog and power-control circuitry. The family includes analog-rich functionality, but exact comparator, ADC, timer, and PWM resources must be confirmed for the selected 80-pin variant. Keep sensitive analog routing away from switching nodes and provide local decoupling according to the manufacturer's layout guidance.
अनुशंसित
Battery-Powered Instrumentation
The R5F104MLAFB#30 is applicable to battery-powered instrumentation where both processing capacity and low-power modes matter. Its 512 KB flash can store measurement procedures, calibration tables, logging logic, and communication firmware, while the 32 MHz 16-bit CPU can perform real-time signal conditioning and control. The RL78/G14 family's 0.60 uA RTC-and-LVD operating condition can support low-duty-cycle products that wake only for scheduled measurements. Determine the actual energy budget using wake duration, analog-block use, communications activity, regulator efficiency, and the selected operating mode.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा R5F104MLAFB#30 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | R5F104MLGFB#30 |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Package | 80-LQFP (12 x 12 mm) | 80-LQFP (12 x 12 mm) |
| Product Family | RL78/G14 | RL78/G14 |
| CPU Architecture | 16-bit CISC | 16-bit CISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 512 KB (512K x 8) | 512 KB |
मुख्य विशेषताएँ
- Matches the closest documented family candidate on headline compute and memory ratings (बनामR5F104MLGFB#30)
- Provides ample code storage for embedded-control firmware (बनामR5F104MLGFB#30)
- Targets power-conscious motor-control and metering products (बनामR5F104MLGFB#30)
डिज़ाइन नोट्स
Design the supply network for the full 1.6 V to 5.5 V operating range, including startup, brownout behavior, and the current required by active peripherals. Place the required bypass capacitors adjacent to the appropriate VDD and VSS pins, keep their grounding paths short, and avoid routing return current beneath noisy switching nodes. The RL78/G14 family can operate at 66 uA/MHz, but the final average current also depends on flash execution, timer activity, analog blocks, I/O states, and sleep-mode entry conditions.
Use the Renesas 80-LQFP package drawing as the controlling source for land pattern, pin numbering, solder mask, and courtyard. Assign all 80 pins in the schematic and mark unused pins according to the device requirements rather than leaving them visually ambiguous. Preserve access to programming, reset, clock, and boot-mode signals for manufacturing and service. Confirm pin multiplexing before routing because several peripheral functions can share the same physical terminal.
Do not select the RL78/G14 purely by clock speed and flash capacity. Verify the exact peripheral mix, ADC and timer resources, communication channels, pin multiplexing, operating-temperature limits, and software support required by the product. The A and G orderable suffixes should not be treated as interchangeable solely because their headline CPU and flash ratings match. Review both exact-device datasheets and validate the firmware, clock settings, startup vector, and peripheral initialization sequence before production.
Separate analog inputs and low-level sensor signals from motor-switching nodes, high-current return paths, and digital clock traces. Use the shortest practical analog routes, a continuous ground reference, and local supply bypass near the MCU. For externally timed or high-speed signals, check the RL78/G14 peripheral input thresholds and pin multiplexing rather than assuming every port can operate at the maximum CPU frequency. Validate signal integrity with the final stack-up and loaded operating conditions.
अनुपालन जानकारी
The product listing identifies the R5F104MLAFB#30 as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was available.